How do I give the answers of my modem in a VI after each command that I send it so that I can see and document his actions?
Hello colleagues LabVIEW'ers!
I created a program that will interview a modem which is connected to the serial port on my pc. I use the VISA starting functions by the serial port set it up and then I plugged into the function WRITE, then the BYTES to the PORT, then the READ function and finally the CLOSE function. The problem statement is as follows:
~ How do they give answers of my modem in the VI after each command, I send it so I can see his actions and ultimately to report query out of it?
Furthermore, I don't know if my commands syntax is correct. Otherwise, I used a program called cygwin interface and a single command, I used is "ssh root@"ipaddress"[enter] This brings me to my modem connection control. The cygwin command syntax would work with my labVIEW VI? If not, then how can I know what the command syntax to use to query my modem to LabVIEW?
Additional information
Modem - modem Satellite 'Evolution '.
Version of LabVIEW - Professional 8.6.1
Method of communication - Serial Port
I appreciate all the assistance of those to receive, and I also hope that responses to this question are many who come through it.
It seems that you have some apples and oranges here. Cygwin is a Linux for Windows environment. It gives you a bit of Linux look-and-feel in Windows. SSH is a secure, shell, which is a network protocol, not RS - 232. The serial port is a different interface. It may or may not have the same commands that you use on ssh - the manual will tell you that.
Regarding the serial interface that you want to do, it looks like you want to just do something like what did the old LVTerm . You can give that VI a test to see if it does what you want.
Tags: NI Software
Similar Questions
-
The Windows wireless program does not work and diagnostic tests tells me to contact the administrator. I am the administrator, but the system I cannot use diagnostic tests or run the recovery. What should I do?
Hi Redemption_Abounds,
I suggest that you check if you can access msconfig from safe mode.
Start your computer in safe mode
http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode
Restart the computer to return to normal mode.
I hope this helps!
Halima S - Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think.
-
How can I remove the photoshop background by default so that I can see my desktop?
How remove the default photoshop "background" (don't know what Adobe calls) so that I can see my desktop? Let me explain. When I open photoshop, it takes up my entire screen. I don't like it. I have to minimize the background to be able to see my office. I took for fixed the menus on the left, top and right and minimizing the background, but every time I open a photoshop file, the background reappears as a cover on my desk, so I have to keep to a minimum the bottom once again. Photoshop guess I should be focusing on a single file at a time and only this file, when in the real world, I jump to a file in a file, several times having photoshop multiple files open at the same time, not to mention other open files as well as a browser too. There MUST be a default setting to open photoshop without the distracting background, but I have not yet found. Can you please help? Thank you. stem
Hi superpage,.
This can be achieved if you are on a Mac.
Go to the window menu, and then choose Application Frame.
Kind regards
Claes
-
How can I change outlook settings to display the field 'to', so that I can see that the emails were sent at a glance?
Outlook:
http://answers.Microsoft.com/en-us/Office/default.aspx
Office at the above link forums
http://answers.Microsoft.com/en-us/Office/ee861097.aspx
Outlook Help Forums at the link above.
They will help you with your Outlook questions when repost you in the Office Forums above.
See you soon.
Mick Murphy - Microsoft partner
-
How can I activate images on the DVD in video file so that I can edit and send to people?
Hello. I recently transferred footage tape VCR to a gathering on a DVD of family. How can I activate images on the DVD in video file so that I can edit and send to people?
Any help would be appreciated, as I was chasing my tail for about an hour and a half now.
Thank you!
When you insert the DVD in your DVD player... close
all the windows that can open and then go to... Start /.
Computer... right click the icon for the DVD player
is in, and then select or open Explorer.The files you need from the DVD are the. VOB files.
You will find them in the VIDEO_TS folder. Copy them
in a folder on your hard drive. Or you can copy the
full VIDEO_TS folder.First... just try to rename one of the. VOB files to
. MPG or. AVI and see if it will matter in Movie Maker.
If import works... drag the file to the timeline and
Economy/publication it to .wmv or .avi format. Then...
Re - import new video film for editing purposes.
(if you have Vista Home Premium or Ultimate, you)
may be able to import the VOB files in Movie Maker
as they are)(FWIW... you can probably play the files renamed
in Windows Media Player to be sure that VOB
file to edit)If you are unable to import the files they need to be converted
another .wmv format would be a good choice.There are many programs that can do conversions...
The following freeware is an example...:(FWIW... it's always a good idea to create a system)
Restore point before installing software or updates)Format Factory
http://www.videohelp.com/tools/Format_Factory
(the 'direct link' is faster)
(the file you want to download is: > FFSetup260.zip<>
(FWIW... installation..., you can uncheck
('all' boxes on the last screen)First, you will need to decompress the file or just open the
Drag FFSetup260.exe out of the folder
and drop it on your desktop. To install left click.Next, after the download and installation of Format
Factory... you can open the program and
left click on the toolbar, the "Option" button and
"Select an output folder to" / apply / OK.
(this is where you find your files after they)
are converted)Drag and drop your video clips on the main screen...
Select "all to WMV" / OK...
Click on... Beginning... in the toolbar...
That should do it...
Good luck...
-
I shoot in the NAVE with a Nikon D5300 but Lightroom 6.1 says that it can't read my files. How can I fix?
I just tried again and this time I have not had any problems - very strange. But thanks for your quick response.
-
I have recently upgraded my MacBook Pro and Adobe creative suite 6.0 on the former. It of maybe a stupid question, but how do I get the software on my new MacBook Pro? My understanding is that my serial number only works with one computer at a time?
Hello
You can install a copy of the software on the second machine it's just you are authorized to use on one machine at a time.
You can check: how many computers can you install or run Adobe software on? ProDesignTools
End user FAQ license contracts
Please visit the given link to download CS6: applications download Creative Suite 6
Concerning
Bianka Attre
-
12 elements how to duplicate an image on the screen (as well as the photo tray) so that I can compare any edition with the original?
- In the full Editor, go to Edition > Preferences > general and check "enable floating Documents in full Edit Mode".
- Open the image so that you can see in the project bin
- Right-click in the thumbnail of the image in the project bin and doubles. It will come as a xxxcopy
- On the icon to reorganize at the top, select 2-top. You should see the original and the duplicate in the work area
-
I can't get my Age of Empires 2: Age of Kings drive on my computer.
It gives me the error message: could not initialize graphics system. Make sure that your video card and driver are compatible with DirectDraw.
What exactly is DirectDraw. and how can I make my video card and the driver compatible to it. I already tried to uninstall and reinstall the drive.
Help, please!
What kind of graphics card you have and you have the latest DirectX and video card drivers? If this isn't the case, update them.
-
Vista - Windows 7 network connection. username and password is unknown.
Hello
I just got a laptop with windows 7 on it and I want to connect to my other PC for it, they are on the same network through a router. the PC can see and access the laptop without asking for a user name and password but the laptop cannot access the PC because it asks me a username and password that I don't know.
If someone could answer this question, it would be great.
HelloMaybe this can help.Win7 when configured on the peer-to-peer network has three types of configurations of sharing.
Group residential network = only works between Win 7 computers. This type of configuration, it is very easy to entry level users to start sharing network.
Working network = fundamentally similar to previous methods of sharing that allow you to control what, how and to whom the records would be shared with.
Public share = network Public (as Internet Café) in order to reduce security risks.For the best newspaper of the results of each computer screen system and together all computers on a network of the same name, while each computer has its own unique name.
http://www.ezlan.NET/Win7/net_name.jpg
Make sure that the software firewall on each computer allows free local traffic. If you use 3rd party Firewall on, Vista/XP Firewall Native should be disabled, and the active firewall has adjusted to your network numbers IP on what is sometimes called the Zone of confidence (see part 3 firewall instructions
General example, http://www.ezlan.net/faq.html#trusted
Please note that some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic. If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .------------------------------
If your network consists only of Win 7 and you want a simple network, use it.
http://Windows.Microsoft.com/en-us/Windows7/help/videos/sharing-files-with-HomeGroup
After you have configured the homegroup, scroll to the bottom for the Permission/security section.
-----------------------------
Win 7 networking with other version of Windows as a work network.
In the center of the network, by clicking on the type of network opens the window to the right.
Choose your network type. Note the check box at the bottom and check/uncheck depending on your needs.
http://www.ezlan.NET/Win7/net_type.jpg
Win 7 network sharing folder specific work - http://www.onecomputerguy.com/windows7/windows7_sharing.htm
Vista file and printer sharing - http://technet.microsoft.com/en-us/library/bb727037.aspx
Windows XP file sharing - http://support.microsoft.com/default.aspx?scid=kb;en-us;304040
Sharing printer XP - http://www.microsoft.com/windowsxp/using/networking/expert/honeycutt_july2.mspxSetting Windows native firewall for sharing XP - http://support.microsoft.com/kb/875357
Windows XP Patch for sharing with Vista (no need for XP - SP3) - http://support.microsoft.com/kb/922120When you have finished the configuration of the system, it is recommended to restart everything the router and all computers involved.
-------------
If you have authorization and security problems, check the following settings.
Point to a folder that wants to share do right click and choose Properties.
In the properties
Click on the Security tab shown in the bellows of the photo on the right) and verify that users and their permissions (see photo below Centre and left) are configured correctly. Then do the same for the authorization tab.
This screen shot is to Win 7, Vista menus are similar.
http://www.ezlan.NET/Win7/permission-security.jpg
The Security Panel and the authorization Panel, you need to highlight each user/group and consider that the authorization controls are verified correctly.
When everything is OK, restart the network (router and computer).
* Note . The groups and users listed in the screen-shoot are just an example. Your list will focus on how your system is configured.
* Note . There must be specific users. All means all users who already have an account now as users. This does not mean everyone who feel they would like to connect.
---------------------
*** Note. Some of the processes described above are made sake not for Windows, but to compensate for different routers and how their firmware works and stores information about computers that are networked.
Jack-MVP Windows Networking. WWW.EZLAN.NET
-
I have a laptop OEM with a Windows XP Home Edition (English language). I need to reinstall, but disk is damage. Where can I find the product so that I can download and reinstall?
Hello
Contact the manufacturer of your laptop and see if they have a disc of recovery of your brand and the portable model.
"How to replace Microsoft software or hardware, order service packs and replace product manuals.
http://support.Microsoft.com/kb/326246
See you soon.
-
I used "windows easy transfer", but after that I can see the files. Any idea about it?
original title: Windows easy transferHi Vrajeshparekh,
1. what files you're talking about?
2. When you see the files?When you use the Windows easy transfer cable to transfer the data that the data is copied. So you copy the data on the old computer also.
Windows Easy Transfer (applies to Windows Vista)
http://Windows.Microsoft.com/en-us/Windows7/products/features/Windows-easy-transferHow Windows Easy Transfer makes setting up a computer easier? (Applies to Windows Vista)
http://Windows.Microsoft.com/en-us/Windows7/how-does-Windows-easy-transfer-make-setting-up-a-computer-easier -
Cannot delete a file in a folder that I can see his name in the list of directories
Help
I can't delete a file that I can see in a folder and a list of directories of files.
The name of the file is "000" without visible extension. Don't know if there is a hidden extension, but it isn't.
I went into the same folder using the "Command prompt" window
However, to enumerate the files in the command prompt window, the file name is not visible, but the forlder report indicates that there is a file whose size is 15 bytes.
The file is not readable in a normal DOS window or text editor, which means that a file such as 'Crimson Editor' Editor opens the file, but there is no visible ASCII character.
How can I delete this file?
It is a virus, and if so, how can I delete?
Best regards, Roy
Try using one of the following free products to remove the file. Assassin http://www.malwarebytes.org/fileassassin.php of files (with or without forcing the deletion: http://www.mydigitallife.info/2008/12/27/force-delete-cannot-delete-locked-or-in-used-files-or-folders-with-fileassassin/) or Unlocker to: http://www.softpedia.com/get/System/System-Miscellaneous/Unlocker.shtml. These programs often work when normal functions remove Vista not work correctly.
I hope this helps.
Good luck!
Lorien - a - MCSE/MCSA/network + / A +.
-
Original title: STORAGE PROBLEM
Is it possible that I can see how much space is being taken up by all my emails and their attachments? If I right click on an email it tells me the size, but if I try to highlight all emails the properties button is grayed out.
For Windows Live Mail, go to C:\Users\user\AppData\Local\Microsoft\Windows Live Mail, right-click on the folder and select Properties.
You may need to show hidden files. Type the Folder Options in the search box above the Start button and select view advanced settings and check that the box "display files and folders" and 'Hide protected operating system files' are not checked. You may need to scroll down to see the second element. You should also make sure that the box before "Hide extensions of known file types" is not checked.
I don't know about Chrome.
-
Is there a setting that I can see what each individual photo is before you open it. As I can see them in the photo gallery. This becomes a problem because when I want to upload a photo, I can't tell exactly what image he is until I open it, but as you know when you upload a photo once you open it it downloads automatically. As I said I can see them in the photo gallery, but I am not able to upload photos. Whenever I have download it takes me to my library of images.
I already live 2012 photo gallery. I have no problem to see them that way. My problem is when I am on a site and you want to upload a photo, it is the case for all the sites I tried, when I click on download need me in my photo library. Whoever you acceding from the Start button in previous versions of windows. That's where I do not see what image I choose until I open it, but once I open it it then download it immediately. The Gallery of live photos of 2012 is supposed to be my Gallery by default photo, but when downloading it will never live photos, but directly to the library of photos under documents. Is there a setting that I can change so it will not go there, or there at - it a way to open all those in this library, so they can be seen?
========================================
If you say you see icons instead of thumbnails...
the following article is maybe worth a visit:Windows 7 - How to enable or disable
Thumbnails in the Explorer of Windows 7
http://www.SevenForums.com/tutorials/11738-thumbnail-previews-enable-disable.html
(Scroll down to: an Option)
Maybe you are looking for
-
IPhoto and iCloud library backup
Hello - I've changed the location of the iPhoto library of HD on an external drive. iCloud as results started to download all the photos again. ICloud creates a duplicate? How can I make iCloud realize that this is the same library?
-
Designjet 4500: DJ 4500 42 '' model error 01.3:01
I'm fixing a unknown story of DJ4500 & problem solved one... now I have another obstacle thatAfter initialized and error came '01.3:01 2 drawer roller is not detected. Check that roll 2 tray cableis conect ".» 2nd drawer was well connected & closed f
-
Pavilion 23-P118: missing drivers - HP Pavilion 23-P118
I reinstalled Windows 7 on a HP Pavilion 23-P118. I was able to install most drivers, mainly because of these forums. I still cannot locate the drivers for the side USB 3.0 Ports. As far as I know, the motherboard is an Amber T 2 / I, but I still can
-
Windows XP Pro is installed. Its a Dell Dimension 8400 series. Question is diskette drive 0 seek failure is. The disk has been disabled. Now stuck in a loop, to select one of the options to start... Windows starts normally, safe mode, last known good
-
Not enough system resources to complete the task
REF Dell Desctop PC Windows XP SP 3... GB 74.4 Mem WITHOUT 24.9 en Recently, because of the new connection by the web... WITHOUT ANTIVIRUS SOFTWARE? PC became badly infected. PC did not close down in normal mode. Necessary to deactivate the tower. "W