How do I port forward on apple airport? (READ ALL)

I have an airport express from apple connected to an asus router via wifi and I need to know how I can portforward by airport to the router because my pc is connected by ethernet to the airport. Help, please.

The express should be none not routing at all and therefore no port forwarding.

The only way this can work is the express installation to the wireless bridge... Apple called client mode... There is no routing.

BUT it can also have port problems... It is really unsuitable if you operate in questions.

In any case all the transfer is possible on the Asus.

Tags: Wireless

Similar Questions

  • How to configure port forwarding on a dedicated server running CentOS 5.4 to use Ubuntu 9.0.4

    The basic situation that I have is a dedicated server running CentOS 5.4 for the moment I have a virtual machine running Ubuntu 9.0.4. Later, I want to add a virtual computer that is running Windows Server 2003, but right now I focus on the implementation and running Ubuntu.

    The installation of Ubuntu works very well, but I am seriously struggling to get the port forwarding so I can visit the Web sites to be hosted on the Ubuntu VM. As a newbie on Linux, I am confused about the relationship between IPTables and VMWare own port forwarding.

    Here's what I've tried so far.

    My server's IP address is xxx.xxx.xxx.xxx, provider support told me that the subnet mask is 255.255.255.0, gateway address is xxx.xxx.xxx.1 and the network address is xxx.xxx.xxx.0. (These last two surprises me a little, I'd expect to be private rather than public gateway/network address).

    First of all, I tried Bridged Networking, but had no luck contacting the machine other than through the VMware console. I tried it the ping from the host (using ssh in the host), but no joy. also no Inernet access from the VM. I changed the configuration of the DHCP server to static interfaces, using a static address 192.168.1.100 and by assigning to the doors of such xxx.xxx.xxx.1 as advised by the supplier. No real difference, still cannot ping the host prompt, or vice versa and any of the customer's Internet access.

    Then I tried NAT. The host automatically 192.168.132.128 with a 192.168.132.2 gateway IP address now, the client has access to the Internet and when I do a VNC host and open Firefox with 192.168.132.128 I can see the correct hosted Web site but I still can't get in from the outside.

    I mentioned that I am a bit confused about IPtables and VMware port forwarding, what I wanted to say, it is that I'm not sure if IPtable transfer must be set to the IP address of the interface of comments (192.168.132.128 in this case) or the address of the 192.168.132.2 bridge.

    I have the impression that I'm missing something simple here, can someone tell me what it is?

    Find your "/ etc/vmware/vmnet8/nat/nat.conf" file and change:

    Example:

    \[incomingtcp]

    8887 = 192.168.27.128:80

    That would redirect a header of TCP packet entering the port 8887 on the host on port 80 of the guest with the IP 192.168.27.128.

    Ditto for the UPD:

    \[incomingudp]

    6000 = 192.168.27.128:6001

    You can (must) use iptables for firewall purposes but does not redirect traffic at the prompt.

    Read page 252 in the Manual: http://www.vmware.com/pdf/vmserver2.pdf

    AWo

    VCP 3 & 4

    Author @ vmwire.net

    \[:o]===\[o:]

    = You want to have this ad as a ringtone on your mobile phone? =

    = Send 'Assignment' to 911 for only $999999,99! =

  • How can I enable port forwarding in the router of the time capsule

    Does anyone know how to enable port forwarding in router Time Capsule Airport please?

    Port Mapping on the time Capsule airport cannot be enabled unless you have the right type of modem on your network.

    Thus, we need the number of brand and model of the device you're calling your "modem" before we can move forward. Please post back this information.  We do not need a series number... only the name of the manufacturer and model number of the modem.

  • How to put in place the new Airport Express to extend the current wireless WiFi U-Verse home network?

    Hello

    What are the steps for the creation of a new AIRPORT EXPRESS MC414LL/A Terminal so that it make that expand my network existing wireless, using my current AT & T UVerse equipment home.  Here are the details...

    Internet service provider: AT & T U-Verse

    Existing facilities: primary AT & T provided router/Modem: ARRIS NVG589 (reference 587234-004-00) that manages my house wired and wireless Wi - Fi.

    PROBLEM: Does not offer full Wi - Fi coverage

    SOLUTION: Attempt to add a new Terminal Airport Express so that it will extend coverage of the existing Wi - Fi network wireless.  I plan on the use of certain features such as streaming my content from iTunes to my sound, surround sound, etc Airport Express Library.

    NEW FEATURE: APPLE AIRPORT EXPRESS 802.11n Wi - Fi PART # MC414LL/A

    I wish I had AT & T equipment to continue to manage the Wi - Fi and network functionality (DNS, firewall, etc.), as it currently does.  However, I want to use the Airport Express to extend Wi - Fi coverage.  I already have a cable ethernet from the floor and the AT & T ARRIS NVG589.  I just need to know how to set up my new Apple Airport Express.

    Thank you!

    With the Express connected to Arris gateway with Ethernet, you have the basis for a roaming network.

    I would recommend that you run the AirPort Utility and allow it to run automatic installation of the Express. The utility should detect that the Express is connected by Ethernet and go through the steps to properly set up. Note: If you have made any changes to the Express since out of the box, I strongly suggest that you first perform a 'factory' reset on it to make sure that the installation went well.

  • Laptop stopped seeing Apple AirPort Express

    Hello

    I'm having a problem with the Wi - Fi with Apple Airport Express (http://www.apple.com/airportexpress/). Windows XP on my laptop Toshiba Satellite M70-339 PSM77E this is crushed about 4-5 days ago and since then he stopped to see the network Airport 4 days ago (but it can still detect the other networks). I think something in the network settings changed on my laptop. That's what I have:

    1 there is Airport Express Mac and a PC laptop Toshiba Satellite M70-339 PSM77E with Windows XP Home Edition.

    2 mac sees the Airport network (and some other neighborhood networks). It is connected to the Internet and it works fine.

    3 laptop with Windows XP stopped seeing the network 4 days without any reason (but it can still detect the other networks of neighborhood, so the material is activated and it works). I had the network works for about 6 weeks. When I first tried to find the network (about 6 weeks ago) I had the same problem: the laptop could not see the network, but then I worked I had a few other internal network settings in my laptop after I removed it, it detected the Airport network. I even used Express Admin Airport utility (or sth like this) to set the WPA security for our network.

    4. to solve my problem now, I tried almost everything I found in apple.com forums and some other related forums this issue, but it seems that this problem is usually solved by chance.

    5. I tried to repair the network connection (by selecting repair in the settings), I removed the networks all the favourites, I had, I disabled all firewall, I tried with different laptop computer IP configuration (I know that he doesn t have nothing to do with the detection of the network, but I was frustrated). I even updated my WiFi drivers and the laptop cannot always detect Airport network (However it can see all the others who are in the region). There is no interference between the laptop and the Airport (the problem doesn t also depend on the distance between the laptop and the device).

    Please give me suggestions. Don't forget the laptop used to detect the network without any problem, and the Internet worked well.

    See you soon,.
    Jakub

    Hello Jakub

    You will be very happy if anyone has experiences with Apple Airport Express and can offer a concrete solution. After losing question have you tried to roll back OS to an earlier time using System Restore tool?

    When the OS works well and stable it is always good to create system restore points or do some sort of backup image. I do this all the time and I'm not worried if something goes wrong.

    Sorry, Jakub, but if you can't find an answer or solution on the apple forum I really don't think you will find it here. The fact is that the WLAN card works, but how to set it up with Apple Airport Express. I don't really know, but as you said already, maybe you need a chance.

  • Try to open the port or do port forwarding for update of the game client (improve the download speed)

    I recently participated in the beta FFXIV and im not to attempt to update the client. It happened for a day now and im only at 78%. I looked on the forums on the site and he told me I should do port forwarding and ill be able to download the updated much more quickly. So my question is how do I port forwarding on a router NetGear on Windows Vista.

    Hello

    Ports must be sent to the IP of the specific computer.

    A specific port can only be transferred to a computer.

    He must be facing forward in the router and also via the firewall software.

    Instructions depends on the specific router you have (the manual force) be useful and the specific firewall software that you use (using the software may contain instructions).

    This site is the champion of port forwarding, http://portforward.com/

    Jack-MVP Windows Networking. WWW.EZLAN.NET

  • Port Forwarding airport 6.3.2 utility Airport Time Capsule model A1409

    Some friends and I have tried to reach an audience subscribed to the server, which requires specific ports to be opened to allow friends to see your created server and join your created server.  To try to reach these servers that we receive messages indicating that the server in #. ##. ##. #: 27015 does not.  This IP address that appears in the message is actually our address public router (modem), but the Apple software uses with its base stations does not the entrance to this IP address public opening of ports and allows only private IP addresses equipment connected to the WiFi set up in your home network.

    We have all tried to open this port 27015 using our Airport 6.3.2 utility software but when we check this port using network utility, it does not show this port as open, so our port logon attempt has failed.

    One of us used a WiFi network provided through Motorola SURFboard SB6121 DOCSIS® modem cable connected to our Apple's Time Capsule 2 TB model A1409 airport.  Use of the Airport utility application on an iMac, we tried to open several ports required specified by different sites for this server in the work and friends to be able to see my server.

    However, when you attempt to open ports, only WiFi IP camera is allowed, such as 10.0.1.2 and not the IP that claims server is unresponsive, which is the IP address for the public router (Motorola Modem) of #. ##. ##. ##.

    We all visited www.portforward.com for suggestions but this site is outdated regarding the latest software from Apple wireless stations.  It seems that Apple does not provide an operational means to open all ports using this time Capsule which actually work and make every effort to get to our computer via airport base station is blocked by the base station.

    The formal question is this: since Apple Wireless/WiFi network has "private" IP for each device connected to the network, how servers join we create outside the home on systems to which we have subscribed and we open the required ports so that we can see?  This server is looking at the public IP address and port (#. #. #. #: 27015) and claiming that it cannot get through this port.  How to open this port so we can use these servers as they are scheduled/planned by the merchant site that we use?

    Thank you

    J

    The basic information about the opening of port are here.

    Airport - Port Mapping Basics using v6.x AirPort Utility

    One of us used a WiFi network provided through Motorola SURFboard SB6121 DOCSIS® modem cable connected to our Apple's Time Capsule 2 TB model A1409 airport.

    The SB6121 is a known issue with Apple routers. Although most of the problems exist with products of next generation, AC AE and TC version, the latest firmware of the previous Gen, 7.6.4 may also have problems...

    I highly recommend that downgrade you the firmware to 7.6.1

    There should be no need to map the ports of a server hosted outside your network... so I'm having a problem reading your post... this server hosted within your network or outside it? Cannot open ports to a hosted server on the outside and it is simply useless to.

    If the firmware downgraded on the TC does not work... I think you have routing problems and the best solution is a cheap substitute for router... cheap... for example a WR1043ND v2 or v3 works perfectly. You can load the better firmware which will also give you better control... < $ 50.

  • I have a new modem and you want to configure my Apple Airport as a backup drive; How do I do that?

    I have a new modem from Verizon and want to configure my Apple Airport as a backup drive; How do I do that?  I need to extend the network, simply find a use for the airport.

    What is the brand and model of your new modem from Verizon? What is the exact model of your airport?

  • Airport of Port Forwarding is more?

    So I'm pretty new to this network thing. I don't know the technical network terms then please do not use (or at least their simplification). So I managed to set up my ASUS RT - something something router. I also put in some rules to sink my Xbox One anywhere port forwarding. However, I had problems with port forwarding, so I just used the dmz for her service. However, given that I had to move my Xbox to another part of my house with worst network connection, set up a time capsule for the network. After a long time, I managed to do the work, but now I can listen to is no longer my Xbox. My guess is that the port forwarding rules are not carriers, as it connected via ethernet time capsule and the capsule is connected to another time capsule via radio and this time capsule is connected to my ASUS router via ethernet. So my question is: how to transfer the required ports to my Xbox?

    If both of your time Capsules are configured as bridges, the Asus router is the one that needs to be set up on port mapping. The port mapping is used only when a router is configured for routing. In other words, the NAT and DHCP services are enabled. This is the default value for any router.

    Just to make sure that I understand your current network configuration, the following is correct?

    • ASUS > Time Capsule > > > Time Capsule > Xbox, where ' > ' represents a wired connection, and ' > > > ' represents a wireless.
  • Port forwarding in vmware workstation 9 (how to transfer all traffic to a virtual machine)

    You are looking for here: Advanced Configuration of NAT

    I can see how to redirect ports via in a particular host vmware NAT service, but my question is how can I transfer ALL traffic to a host? I found no info on how to do that.

    Is there any way I can forward all traffic incoming on a virtual machine?

    The syntax is = : and as such it is singular in all references, so I don't know of a way around it.

  • The Apple AirPort Express Base Station is a good solution?

    I'm moving so leaving the wifi station that Verizon gave me. I think I have the Apple AirPort Express Base Station by station WiFi. I connected an iMac (main computer) MacBook Pro, iPad, iPhone.

    My main question is how this used for the WiFi base station compares to others on the market.

    Thank you!

    Johnny

    The AirPort Express has limited the ability of speed due to its slow and limited capacity wireless Ethernet port due to its very small built in WiFi antennas.

    However, if the plan of your new Internet Service Provider (ISP) is limited to about 50 Mbit/s, then the Express would probably be OK if most wireless devices will be located near the AirPort Express Terminal.

    If the budget allows, an AirPort Extreme is a much better product... up to 10 times the speed of the Express... with additional WiFi antennas located just above the 'tour' to improve performance.

    If your new ISP plan is 100 Mbps or higher, then AirPort Extreme would be a better match.

    If you are considering other routers from other manufacturers... we cannot comment at all on their performance without knowing the number of brand and model of the device you are considering.

  • Apple Airport express records is not on the wifi network

    HI, I bought an Apple Airport Extreme new several months and I haven't connected my Airport Express so far. For some reason, the Airport Express is same does not record on the network. I unplugged for several minutes and plugged in. I don't know if there may be a software update that I missed?  Someone had this problem?  I would be grateful for any help. Thank you! Chuck

    If you have not reset the Terminal AirPort Express to settings by default and then set up again to extend the network provided by the AirPort Extreme... so now may be a good time to do this.

    As it is, the Express is not "appear" on your network because it has not been provided with the settings to do.

    If you need some advice on how to get the Express running... we will need a little more information from you as follows:

    (1) your AirPort Express Terminal has two Ethernet ports... or... does he have one?  If is has one, we need to model on the side of the unit number. It starts with an "A" followed four digits.  For example... A1264.

    (2) AirPort Express Terminal will connect to the network using a permanent connection to the Ethernet cable wired to AirPort Extreme... or... the Express will connect wireless?

    (3) what device you use to configure the AirPort Express Terminal?

    (4) If you have a Mac, we need to know what operating system they are running. If you are not sure about this, click on the Apple icon in the upper left corner of the screen, then click on about this Mac and post back with the Version of OS X number that you see there.

  • Port forwarding on Time Capsule for Geniego

    Anyone know how to configure the port forwarding on time capsule?

    I need to set a port 8082 & 8083 for my Directv Geniego.

    Press the bar area and order at the same time.

    Airport utility type, press ENTER.

    Select time capsule, and then select edit (enter the code for the device).

    Select network, select "+" sign

    Firewall entry type: IPv4 Port Mapping

    Description: GenieGO

    Public UDP: If manual of the Consult of UDP user, enter the numbers of the port here (use commas to separate).

    Public TCP: If manual of the Consult of user TCP, enter the number in port here (use commas to separate).

    Private IP address: IP address of your GenieGO

    UDP private: same as the public

    Private TCP: Same as the public

    Select Save

    Update of TimeCapsule.

    Test.

  • SG300 combination with Apple AirPort Extreme

    Hello

    I recently bought a SG300 series switch. I want to connect my internet connection in a port of the switch and connect my Apple AirPort Extreme in the switch. So I want that all my other ports on the switch to be put to rout by the airport. Connection Internet and airport to the switch gives you access to the Internet for all wireless clients connected to it. But no switch ports can ping from the airport.

    How can I configure this as simple as possible?

    What I've done so far is to switch the L3 and nothing else. With nothing has changed from the default settings, I was expecting unrestricted access between ports, but appears not to be the case.

    It's my first time, so I expect that it's probably a simple problem.

    I hope someone can point me in the right direction.

    Thank you in advance.

    FR. Lars

    Lars salvation,

    I don't know what is the idea behind connection WAN and LAN to SG300. Is it because you have a single switch, but would need two?

    Also I am not aware how the airport works. Not NAT?

    To add a static route you must navigate Configuration IP--> IP--> Routes IPv4 interfaces and management

    Destination must be 0.0.0.0 IP prefix also 0.0.0.0 if this static route so to access internet.

    Kind regards

    Aleksandra

  • HP Photosmart C4795 with Apple Airport Extreme Wireless router - cable PC problem

    Hello

    I searched, but I can't quite find an exact match for my problem.

    I have a new HP desktop computer running Windows 7, and I attach it to my wireless router which is an Apple Airport Extreme.  I have attached my HP C4795 printer to the USB port on the * router *.  In theory, the USB key should pass through, so that the office will think it's a printer "connected", while also allowing us to print remotely from our laptops (via the router).

    Unfortunately, while portable computers can print wireless very well, the * office * Guard 'lose' the printer, thinking that it is in offline mode.  Even when it shows 'online' (after my relocation via "Add a printer"), still error-out print jobs.

    Can someone help me understand how this works?  The printer works fine, btw, if I disconnect the USB cable between the router and plug directly to the PC, if it isn't something directly with the printer or the desktop, but rather the * combination * of running through the Apple Airport Extreme router.

    Thank you

    Terry

    Thank you, once again, Jim.

    I think I have stumbled on the solution.  I did a reading online on Apple application 'Hello', and how he felt necessary for Apple devices, like the airport, knit with device sharing.  I forgot that the installation of the airport disk had said something Hello installation, but I discovered on my Wired HP Win 7 PC menu programs, called 'Hello Printer Utility' or something, and I launched it, selected the C4795 in the dialog box, and all seems to be put in place (i.e. the printer suddenly showed as 'online' and I could print from my desktop wired as well as wireless laptop).

    Success!

    Thanks for all your help on this.  Now, all I need is to get my WD My Book external/sharing the hard drive to work as well!  Unfortunately, I do not see here a "Hello Hard Disk Utility", but I feel somehow that morning will be the answer.  I just understand it.

    Thank you

    Terry

Maybe you are looking for

  • Best bookmarks? List of all my favorites when bookmarking.

    Bookmarking is difficult if you have 30 + folders of bookmarks. Is it possible to see the entire list when you begin the bookmarking process?

  • Toshiba virtual Store account Reset - 36807

    cannot enter the store he asks me email and password to my personal account: 36807

  • Snow scene - image not sharp

    PowerShot sx50 hs - pix usually NET having trouble now blurry pix deer or wild turkeys on snow first plan, background wood. Same results in shiny or Matt light. Near telephoto. Advice pls?

  • New ergonomic keyboard high range. When?

    Years now, I'm waiting for an ergonomic keyboard more modern than the natural ergonomic 4000 (with all the features of the Wireless Entertainment Desktop 8000 and maybe even more). They did stop developing keyboards high-end or something? It has been

  • Cannot ping sub interface from my remote site VPN gateways

    I can't ping my gateways to interface my remote vpn connection sub I can ping 192.6.1.0 network, but can't ping network 192.6.2.0 or 192.6.3.0 When I remote desktop in 192.6.1.20 I can ping all the networks, including gateways to interface sub. I thi