How do I programatically set/get digital format of a variable 'type' of c#?

Similar Questions

• How to set the digital format via the API

  Hello

  I have a utility that imports limit of external resources and that the utility (c#) I would need to change the digital representation so that what is defined as hex in the external resource should appear after imported to TS so hexa.

  Can U help out me if it is possible with the API, and if so, what is the good methods for doing this?

  Thanks in advance.

  Hello

  Only a few minutes ago, we have found this solution work:

  x.NumericFormat = "%#X";  where x is the PropertyObject pointing to the number. It is just not documented anywhere for this method that you can use X for hex.

• How do I do to get the slide to set up to go to the right and continue? I was up half the night and is not wrong. The only thing that I just did is plugged into the wall outlet and now I'm right back where I had problems. Why keep this product?

  How do I do to get the slide to set up to go to the right and continue? I was up half the night and is not wrong. The only thing that I just did is plugged into the wall outlet and now I'm right back where I had problems. Why keep this product?

  What do you exactly mean by "get the slide to set up go to the right and continue"? Can you give us a little more context and detail?

• my computer crashed, how do I download adobe photoshop elements digital format (I have the cd

  my computer crashed, how do I download adobe photoshop elements digital format (I have version cd, the redemption code and serial No.) on my new computer which lacks a cd player

  If you follow the 7 steps you can dl a free trial here: http://prodesigntools.com/photoshop-elements-11-direct-download-links-pse-premiere-pre.htm l

  and activate it with your serial number.

  If you have a problem dl'g, you don't follow all 7 steps.  the most common mistake is not meticulously follow the steps 1, 2, and/or 3 (which adds a cookie to your system, allowing you to download the correct version of the adobe.com site).

• How to set the display format for datetime field in a page jspx

  Hi, jdev 11.1.2.3
  have an EO/VO field set to DateTime format and can see the right screen in the Oracle ADF Model tester.
  but only displayed in the format of Date had been set to "javax.faces.DateTime" for the attributes property for the field palette converter.
  
  What should I do?
  Thank you.

  did you mean like this?

  
  Type = "both" / >
  

• Why my cadratins split into two quadratins only in digital format (ebook)?  How to stop this?

  I work for a Publisher and we use InDesign to implement our print files can be downloaded (usually in PDF format).

  Then, I create a new file for ebooks, remove pages additional, marking the table of entries contained as hyperlinks, etc. internal.

  Given that the Kindle plugin is still in beta and cannot, for some reason, recognize a table of contents created using hypertext links (even if that's what specify instructions), I convert it to an ePub, check, make all necessary revisions, except that as the upload of ePub.

  Can I convert the ePub in mobi using Calibre.

  In both cases, my cadratins are divided into two quadratins in digital versions.  I use the low InDesign Type menu to select the em dash and it appears as a single symbol or glyph.  Print file seems perfect.  It is only when it is converted to a digital format that the em dash is divided into aligned format.

  I need to find a glyph special to use does not appear in my font (Times New Roman)?  I really need to fix this!  Any help is appreciated.

  Hello

  Thanks for sharing files. In the "OutpassageEbookTextcontent.indd" document, instead of an em dash, two quadratins are used and it is probably the reason why you see in the EPUB. You can use the find/change dialog box to understand when these are used. I sent an email stating in many places where they are used as your files may be confidential and I abstained from publishing excerpts of text on the forum. Please take a look and let me know if I have not understood your problem.

  Kind regards

  POOJA

  InDesign engineering

• How can I burn an ISO 9660 format disc in windows 7 >

  I am trying to load music and photos in my Ford truck that has Microsoft SYNC. He reads only the disks in ISO 9660 format. I use Windows 7 and can't get a drive to burn in any other than the UDF format. How can I burn an ISO 9660 format disc using Windows 7?

  I am trying to load music and photos in my Ford truck that has Microsoft SYNC. He reads only the disks in ISO 9660 format. I use Windows 7 and can't get a drive to burn in any other than the UDF format. How can I burn an ISO 9660 format disc using Windows 7?

  ========================================
  The free ImgBurn is perhaps what you are looking for.

  FWIW... it's always a good idea to create a system
  Restore point before installing software or updates)

  Download ImgBurn:
  http://www.Digital-Digest.com/software/download.php?sid=470&SSID=0&did=1
  (works on XP, Vista, 7) (to download... left click on the green)
  spot with the white arrow: "Click here to download")
  (The download is: SetupImgBurn_2.5.7.0.exe)

  (During the installation there will be an option to install
  Shortcuts of UniBlue and the "Ask Toolbar"... you can
  you want to deselect those)

  The following tutorials may be worth a visit:

  Also... See the following screenshot:

  Find the 9660 option
  http://i47.Tinypic.com/2qiradw.jpg

  ImgBurn - create the file image from files/folders
  http://grok.LSU.edu/article.aspx?articleid=15771

  How to create an image file of a disc with ImgBurn
  http://Forum.ImgBurn.com/index.php?showtopic=6379

  How to write an image file to a disc with ImgBurn
  http://Forum.ImgBurn.com/index.php?showtopic=61

• Custom digital format

  Hello
  
  I'm using OBIEE 11 g.
  I have a report that is as
  
  A 2345658546
  B 27484094574
  
  I want to display format lakh
  for ex 2,34,56,58,546
  
  P.S Using operator thousand doesn't work as expected, it shows as (2,345,658,546)
  
  How to get there
  Thank you
  Abdul

  Abdul,

  Data format - number of feast as custom
  Custom digital format = [> 9999999]##\,##\,##\,##0.00;] [> 99999]##\,##\,##0.00;##,##0.00]

  What shud give your condition...

  Hope this useful...

• Workspace: unregistered control/indicator Digital Format

  Hello

  Using VS 2013, I'm not able to maintain the digital format of a digital medium.

  

  • Open and run the project delay example of Sinewave
  
  
  • On the workspace, do a right-click on a digital indicator to open the dialog box change point
  
  
  • Go to the tab Format & accuracy, Format has a value other than Decimal (engineering here) click OK.
  
  
  • Save (File' Save) and leave the workspace
  
  
  • Run the project again
  
  
  • On the workspace, do a right-click on a digital indicator to open the dialog box change point
  
  
  • Go to the tab Format & accuracy: Format value is decimal (and not the previously defined value)

  I do not think it is the expected (also tested with VS2012) behavior. This applies also to controls.

  I did something wrong? Is this a bug? Am I the only one having this problem?

  Best regards

  Matheiu Hey,.

  It is certainly a bug. It shouldn't work like this.

  We have the question followed internally as CAR #449833. Keep an eye on this number in the section of the fixed a Bug of version of the fix to come/releases readme (similar to this). We should hopefully get it sent soon!

• How am I supposed to get help from microsoft when someone hacked my account? I've done everything asked, and nobody gets in touch. I'm losing business from day to day.

  How am I supposed to get help from microsoft when someone hacked my account?  I've done everything asked, and nobody gets in touch. I'm losing business from day to day.
  I've now set up a separate hotmail address so that I can write on this forum. It's a joke. I have tried for days to resolve this. Microsoft... one of the best companies in the world... poor quality more like...
  make money then I lose business... I am a small business as it is.

  I NEED HELP TO RETRIEVE MY PREVIOUS ADDRESS EMAIL PLEASE PLEASE PLEASE PLEASE PLEASE.

  Hi kate louisecox,.

  I understand your frustration.  In the search for your question, you got to see this article?  It examines a compromised account:

  http://www.windowslivehelp.com/solution.aspx?SolutionID=6ea0c7b3-1473-4176-b03f-145b951dcb41

  Also, if this does not help your situation, I would say that post future questions about this issue in the Windows Live Solution Center Forums as they would be able to help you:

  http://www.windowslivehelp.com/forums.aspx?ForumID=b782602b-8e7c-40D8-a66b-b44824497a17

  Like a record, these are public forums, so not everyone who responds is an employee of Microsoft.

  Thank you for using Microsoft Answers!

• How can I remove "set up files" and completely reload windows xp?

  How can I remove "set up files" and completely reload windows xp? They were installed when I tried to reload xp before and there is always a sp1 on the pc version now.

  This CD should work and it should be bootable.  It seems that if you always boot from the hard drive and then you look at the content of the CD-ROM in Windows Explorer.

  If the BIOS is set to boot from the CD, you should not get a menu asking which device to boot from.  At most, you will get something like "Press any key to boot from the CD-ROM."

  You have an another bootable CD that you know works or do you have another computer you can try this CD to see if it works correctly?

• How and if I can get the Vista OEM disc.

  How and if I can get the vista OEM disc. Install win 8 did not know that it would take on my vista os that Microsoft wants everyone to high grade don't like win 7 and win 8 is not working properly I want to reinstall vista. Laptop has been used without disk key code.

  Hello

  There is no Windows Vista downloads available from Microsoft.

  You can contact your computer manufacturer and ask them to send you a set of recovery disks.

  They should do this for a small fee.

  To reinstall Vista using their recovery disk/s, you start from the 1st recovery disk they provide and follow the manufacturer's instructions to reinstall:

  You need to change the Boot order to make the DVD/CD drive 1st in the boot order:

  How to change the Boot order in BIOS:

  http://pcsupport.about.com/od/fixtheproblem/SS/bootorderchange.htm

  "How to replace Microsoft software or hardware, order service packs and replace product manuals.

  http://support.Microsoft.com/kb/326246

  Some manufacturers have more available Vista recovery disks.

  If this happens, you may need to try this instead:

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon.

• Anyone know where I can get a formatting tool to format an external hard drive to FAT32?

  Anyone know where I can get a formatting tool to format an external hard drive to FAT32 using OEM of Windows 7 (32 bit).

  I want to use a Western Digital elements external Hard Drive 500 GB/GB on my Panasonic Blu RAY recorder DMR-BW850.

  Formatting on W7 tool reformatted hard drives only as exFAT, who does not work, works only FAT32.

  original title: FAT32 formatting help

  Throw on this article. This can be easily done from the command prompt.

  http://www.online-tech-tips.com/computer-tips/formatting-external-hard-drive-to-FAT-32/

  Remember that you cannot store a file that is greater than 4 GB on a FAT32 partition.

• How to set the binding on a LOV variable based on the value of the calling page

  Here is the scenerio: Page is a login (username and password) page and their values are stored in a pod of support. On successful login page two is called (createRequest) based on
  a view object 'Userequest '. One of the fields is EmpNo which is a selection on the element of choice ("EmpByMrgLOV" read only view Explorer that contain the variable bind "UserNameId"). I want only to be displayed in the LOV
  employees who report to connected users. I tried different ways to set this parameter, but without success. It's my first attempt using JDeveloper and ADF and 4 days have already
  was devoted to it. Can someone please tell me where and how to proceed? Be as detailed as possible. I use Jdeveloper 11.1.2.3.
  Thank you.
  
  Published by: spcornell on February 27, 2013 12:09

  If your still to know how to to this topic, here's an option. I hope this helps.

  -----------------PART 1-----------------------------------------------------------------------------------
  Override the default constructor as this.
  lov instance will be created after the entry of the TF of the 2nd screen, so by LoggenInUser then will start,
  and will be used to create the instance of lov uses this value as a bind variable.

  SerializableAttribute public class EmpByMrgLOVImpl extends EmpByMrgLOV {}

  private String myusernameid ="";

  /**
  * This is the default constructor (do not remove).
  */

  public EmpByMrgLOVImpl() {}

  Set usernameid here when built
  get the usernameid of the bean class - btw the bean will be updated on the Taskflow method call before execution and now and set in constructor
  FacesContext facesContext = FacesContext.getCurrentInstance ();
  ELContext elContext = facesContext.getELContext ();
  ExpressionFactory expressionFactory = facesContext.getApplication () .getExpressionFactory ();
  ValueExpression exp = expressionFactory.createValueExpression (elContext, "#{mySOMEBean.LoggedInUser}", Object.class);
  This.myusernameid = (String) exp.getValue (elContext); set the user to act as link var

  }

  {} public void setmyusernameid (String myusernameid)
  This.myusernameid = myusernameid;
  }

  public String getmyusernameid() {}
  Return myusernameid;
  }

  }

  -----------------PART 2--------------------

  variable binding must Access EmpByMrgLOV VO using groovy as below

  You EmpByMrgLOV YOUR query tab, add bind var as below:
  Name = EmpSOMEUser (change to what your query)
  Type = String
  Value = ADF. Object.viewObject.myusernameid

  -----------------PART 3--------------------
  Once you have created a method taskflow run between your fist and 2 nd page, add set / gets in the bean for the var as below

  public MySOMEBean {}
  private Stirng LoggedInUser ="";
  {} public void someMethodCalledBeforeTFEntryintoSecoundScreen (String loggedinuser)
  if(loggedinuser!=null)
  setLoggedInUser (loggedinuser);
  else {}
  System.out.println ("not loggedin user");
  setLoggedInUSer (null); This will result in a null btw pointer
  }
  }
  public setLoggedInUSer {(String loggedinuser) {blah blah}}
  public String getLoggedInUser() {blah blah}
  }

  So part3 gets put first based on what you collect on your first page, then
  part1 at lov construction that uses part3 for her time

• How to make the transition to digital in 10g

  Hi all
  
  
  We have 10g database of primary and standby, I have never worked before sleep, customer wants me start switch, can you please let me know how to make the transition to digital in 10g.
  
  
  Thank you very much.

  It's the way I'm following passage in the
  ------------------------------------------------------------

  (1) check that there is no active users connected to databases.
  (2) select message from v$ dataguard_status;
  (3) select protection_mode from database v$.

  Step 1 check if it is possible to perform a failover.

  SQL > select database_role, db_unique_name, SWITCHOVER_STATUS, v database name $;

  DATABASE_ROLE DB_UNIQUE_NAME SWITCHOVER_STATUS NAME
  ---------------- ------------------------------ -------------------- ---------
  PRIMARY OFMSREGT_SIM UNAUTHORIZED OFMSREGT

  SQL >

  If you get NO allow status for SWITCHOVER_STATUS, verify that the standby database is connectivity.

  If the SWITCHOVER_STATUS column displays ACTIVE SESSIONS, you can successfully achieve a failover by adding the WITH clause LOGOFF to the statement ALTER DATABASE COMMETTRE through PHYSICAL standby

  Step 2 open the passage on the primary database.

  SQL > SHUTDOWN IMMEDIATE;
  SQL > STARTUP MOUNT;
  SQL > ALTER DATABASE COMMIT TO SWITCH STANDBY MODE PHYSICAL;

  Step 4, check the transition state in the view V$ DATABASE.

  SQL > SELECT SWITCHOVER_STATUS FROM V$ DATABASE;
  SWITCHOVER_STATUS
  -----------------
  TO_PRIMARY
  1 selected line

  Step 5 place yourself in the role of physical standby database target the main role.

  You can switch a standby database physical role ensures the primary role
  When the standby database instance is mounted mode redo apply or open
  for read-only access

  SQL > ALTER DATABASE COMMIT AT THE GRADE CROSSING;

  Step 6 complete the transition of the database ensures the main role.

  If the physical standby database has not been opened in read-only mode since the
  the last time it was started, run the SQL ALTER DATABASE OPEN to open
  the new primary database:

  SQL > ALTER DATABASE OPEN;

  If the physical database was opened read only since the last
  time it was launched, you must close the database waiting for target and restart:

  SQL > SHUTDOWN IMMEDIATE;
  SQL > STARTUP;

  Note: There is no need to close and restart other bases before (not involved in the digital switchover) who are online at the time of the failover. These databases on hold will continue to
  function normally once the failover is completed.

  Step 7 if necessary, restart log apply services on standby databases.
  He must deliver the command FRO repeat apply as:
  SQL > change database recovery managed standby database disconnect from the session.
  or
  And stop repeating applies to give
  SQL > alter database recover managed standby database cancel;

  Step 3 Shut down and restart the former primary instance.

  SQL > SELECT OPEN_MODE FROM V$ DATABASE;

  Step 9 check the synchronization between the primary and standby:

  Primary
  SQL > select thread #, max(sequence#) in v$ archived_log where archived = 'YES' group by thread #;

  Sleep mode
  SQL > select thread #, max(sequence#) in v$ archived_log in case of application = 'YES' group by thread #;

  Stop the former primary instance and restart and mount the database:

  Sense of SWITCHOVER_STATUS
  --------------------------------------------
  The column SWITCHOVER_STATUS of v$ database can have the following values:

  NOT ALLOWED - this is a database of pending and the primary database has
  not been first switched, or it's a back-end database and there is no data pending.

  ACTIVE SESSIONS - indicates that there are active sessions of SQL attached to
  the primary database or emergency that must be disconnected before the
  failover operation is allowed.

  Transition to THE PENDING - this is a database of relief and the primary database
  application of the digital switchover has been received but untreated.

  LATENT pass - the digital switchover has been waiting mode, but has not completed
  and I went back to the primary database.

  Primary SCHOOL - this is a database of pending, any sessions active, i.e.
  allows to switch to a primary database.

  In STANDBY mode - this is a primary database, any sessions active, i.e.
  allows to switch to a standby database.

  RECOVERY NEEDED - this is a database of pending that has not received the
  application of the digital switchover.