How do Iregister and connect

Similar Questions

• How to read and display a my a miccrontroller (MCB1700) on labview signal connected via a port on a PXI machine CAN

  How to read and display a my a miccrontroller (MCB1700) on labview signal connected via a port on a machine PXI CAN?

  I tried using a DAQ Assistant, but the port is not included as one of the physical channels supported, even if all his drivers are up to date.

  Help, please...

  Thank you.

  If you can read it in MAX, then you should be able to run the NI CAN example.

  Help-> find examples

  Find the CAN and watch CAN Receive.vi.

  Basically, set up the network, open the object, read in a loop close object when it is done.

  If you have any questions about the example, go ahead and post your vi and we can work from there.

• When sending e-mail and how do you change «connected by DROID on Verizon wireless»

  When sending e-mail and how do you change "connected by DROID on Verizon Wirelss"

  found it... Thanks

• How to download and install on another computer without internet connection?

  I have an old computer with windows XP Home Edition. How to download and install on another computer without internet connection?  Files such as DirectX, real player, Media Player.  What I find it just download and install the file must then go to the internet.

  The following site may be worth a visit:

  Microsoft Download Center
  http://www.Microsoft.com/download/en/Search.aspx?p=0&r=10&t=&s=availabledate ~ Descending true... some files are simply web installers, but if you continue
  the research you should be able to find the full downloads. You can
  Talk about the size of the file if you get the full download.

  For Microsoft files... it can help search for developer files
  or redistributable.

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Use DirectX Runtimes (June 2010)
  http://www.Microsoft.com/download/en/details.aspx?ID=8109

  RealPlayer
  http://www.filehippo.com/download_realplayer/

  Windows Media Player 11 for Windows XP
  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=8163

• How can I activate my guest account login and connection to my server

  original title: network connections

  How can I activate my guest account login and connection to my server

  Hello

  Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the public on the TechNet site. Please post your question in the below link:

  http://social.technet.Microsoft.com/forums/en/category/WindowsServer/

• How can I add my laptop to the network and connect to the internet as well

  I have internet access on my computer at home, the ipod, the ipad and iphone.  How can I add my laptop to the network and connect to the internet as well?

  Hello

  I suggest you to refer to the following Microsoft article and check if it helps.

  Add a device or computer to a network:

  http://Windows.Microsoft.com/en-us/Windows-Vista/add-a-device-or-computer-to-a-network

  For more information, see the following Microsoft article.

  http://Windows.Microsoft.com/en-us/Windows-Vista/setting-up-a-home-network

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-you-need-to-set-up-a-home-network

  http://Windows.Microsoft.com/en-us/Windows/explore/home-networking

  Hope the information is useful.

• How many workstations can connect and use a hard drive in windows 7 Professional?

  How many workstations can connect and use a hard drive in windows 7 Professional?

  Thank you

  Randy

  Original title: Windows 7 Professional Log In

  If my memory serves me, 10 is the professional for Windows Server limit.

• When I open a PDF and try and connect you to convert the document to word format he said "reader has no ability to access this service" and it doesn't let me move forward. What this means and how do I continue to Word so I can edit pdf

  When I open a PDF and try and connect you to convert the document to word format he said "reader has no ability to access this service" and it doesn't let me move forward. -What this means and how do I continue to Word so I can change the pdf document?

  Hi wayned76005641,

  You subscription Adobe export to PDF, make sure that you are signed in DC from Adobe Acrobat Reader Adobe - Adobe Acrobat Reader DC Distribution using your Adobe ID to use the service to export it to PDF service The Adobe export in PDF format allows you to convert a PDF to Word, Excel, PowerPoint and RTF formats..

  You can also use this online https://cloud.acrobat.com/exportpdf service

  Once the PDF is converted .docx file you can edit in MS Word.

  Kind regards
  Nicos

• I volunteer for installation of the Government in New Orleans.  I'm helping recommendations on equipment and software.  Their editing computer cannot be connected to the Internet.  How to buy and receive the software and updates?

  I volunteer for installation of the Government in New Orleans.  I'm helping recommendations on equipment and software.  Their editing computer cannot be connected to the Internet.  How to buy and receive the software and updates?

  Please see this link in the topic "successful."

  Creative cloud using Enterprise | Applications and updates

  You can use managed delivery of applications for the following:

  • If you need to exercise strict control over the applications installed on client computers.
  • If end-users have administrator privileges on the computer.
  • To reduce Internet bandwidth consumption by preventing multiple downloads of self-service.
  • If there is no Internet access on client computers.

• How to get around the main navigation screen and connect to different responsibilities

  How to bypass the main navigation screen and connect to the home page of different responsibility directly?

  Hello

  Update of "User Preferences" on the home page.

  Navigation:

  -Entrust--> region 'Start Page' desired preferences;

  the user will be accessed directly to accountability.

  Kind regards
  skannegulla

• [Win7] How routing metric is determined when wired and connected to the same subnet and enabled both wireless adapter

  We have one under the Network Setup:

  1 Win 7 laptop with the wireless and wired adatper1 card1 enabled and connected to the 192.168.1.0 network.

  WLA1 - 192.168.1.2

  WA1 - 192.168.1.3

  2 Win 7 laptop with the wireless and wired adatper2 card2 enabled and connected to the 192.168.1.0 network.

  WLA2 - 192.168.1.4

  WA2 - 192.168.1.5

  WLA1 and WLA2 are connected by a wireless access point.

  WA1 and WA2 are connected via L2 switch.

  Every time we ping from laptop1 to 192.168.1.4, need the wireless path.

  Similarly, when we ping from laptop1 to 192.168.1.5 only need to access wired road.

  In addition, if we disable WLA1 in laptop1 and laptop1 192.168.1.4 ping, ping does not occur and ping is successful only if the wireless network adapter is enabled. It does not take the cable path.

  I just sub questions:

  -On what basis the route is chosen correctly?

  -Can we expect this happens all the time or roads can vary according to certain parameters?

  -Why it only takes the path wired when we ping from laptop1 to 192.168.1.4 after having turned off the WLA1.

  RB

  You will get a more definitive answer on metrics on Technet

  This issue is beyond the scope of this site and must be placed on Technet or MSDN
  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• How to implement new strategies system and connection WS ADF in OEM through orders WLST

  Hello

  I would like to know if there are orders WLST available for creation of new system policies and ADF WS connection, other than manually configure them in Oracle Enterprise Manager.

  Thanks in advance for any help/suggestion/response.

  Kind regards

  Stéphane

  Hi Timo Hahn,

  Thank you for your response. Noted, will show the future requests related to weblogic in the appropriate forum.

  Anyway, I tried the recording feature in the WebLogic administration Console, but it seems it records only the configurations being performed in the weblogic administration console only and not from the Enterprise Manager console (where system and connection WS ADF strategies are before manually).

  I could find answers but already on my queries using the following commands WLST.

  To create a system policy/permissions:

  grantPermission ([codeBaseURL = 'url',] permClass = "permissionClassName", [permTarget = "permName"], [permAction = "comma_separated_list_of_actions"])

  To create an application's ADF customer WS with GOSA strategy attached and hardware overloaded:

  createWebServiceConnection (appName, wsConnName, wsdlUrlStr)

  attachWebServiceClientPolicy (application, moduleOrCompName, Moduleinfo, serviceRefName, portInfoName, policyURI)

  setWebServiceClientStubProperty (application, moduleOrCompName, Moduleinfo, serviceRefName, portInfoName, propName, [varValeurProp])

  Kind regards

  Stéphane

• How to disable integrated PERC S300 controllers and connect hard drives directly onboard SATA

  Hello

  I bought new servers, two of them came with PERC S300 controllers. When I tried to install Linux (CentOS) on this subject, the system could not see the RAID!

  After some research, I noticed that it is Windows specific (fake RAID)

  I want to disable this controller and connect my hard drives directly to the main card SATA connectors and implement a software RAID under Linux.

  What I need is:

  What cables I need to order for this?

  Thank you

  When I picked my servers and decided on their specifications, this note (red) was not on the site, and I am sure about that because I have not all Windows servers on my network.

  Now that I ordered and received them, I'm looking for a solution.

  I ordered this kit: Dell PowerEdge HDD DATA CABLE KIT DP/N C450M CN-0C450M

  

  I will receive next week. I hope that this will help me get around this annoying problem.

• How to find and remove certificates in iOS9

  Hello world

  I just download an App 'VPN Master' and connect to the USA server, app install a certificate from profile in my iOS system, after checking the app, delete them, but I can not find the certificate in my phone. Does not appear any profile to remove.

  Fur I have more than one.

  How do I find and remove any certificate installed in my device?

  Thanks in advance

  Try the procedure described in this article:

  http://www.IMore.com/how-remove-root-certificates-your-iPhone-or-iPad

• How to install and format the iPod Shuffle 512 MB in Windows 10?

  I tried to install and old iPod shuffle 512 MB (the long one) of 10 Windows 64 bit computer since the original installation CD and it retains formatting forever. I had to stop the installation. Any ideas?

  Do not use the original disc.  This is the software for nearly ten years ago, and it probably won't work with Windows 10.  To use an iPod, you must install iTunes; Download the latest version here

  http://www.Apple.com/iTunes/

  Run the downloaded installation program to install iTunes 12.  Launch iTunes and connect the old iPod shuffle to a USB port.  Although the iPod is old, it works with the latest version of iTunes (as long as it is functional).  The shuffle will appear in iTunes as a button on the device, on the horizontal bar that runs through the iTunes window.  See below for the screenshot of the window of my iTunes (on the upper left), showing the device for a 1st shuffle button (circled in red) gen.

  

  Click the button on the device to display the screen of the iPod settings in iTunes.

  This is for the original shuffle user's guide

  https://manuals.info.Apple.com/manuals/0/MA521/en_US/iPodshuffleUserGuide.PDF

  However, this manual is as old as this software disk and does not exactly how the latest version of iTunes.  Once get back you to the point where you see the shuffle in the iTunes window (and you have songs in your iTunes library), please post with your questions.  I can provide advice to sync songs to your shuffle.