How do iretreive cbs.log on windows 7 Home premium notebook is asus a53u eh11

Similar Questions

• How will I know if my Windows 7 Home Premium OA is 32-bit or 64-bit?

  How will I know if my Windows 7 Home Premium OA is 32-bit or 64-bit?

  Start > Control Panel > all control panels > system

  He'll tell the operating system 32-bit or 64-bit.

  Good luck

• How to get a disc from Windows Vista Home Premium 64 - bit after I lost mine? I product key for it, just need to drive; How to do it?

  I currently have a HP with Windows 7 on it. I want to wipe my hard drive (a full cleaning) and start again. I have the product key of Windows Vista Home Premium for a 64-bit computer, only to have not only not the disc. Recently, I called HP to get a new, only for them to tell me that they cannot help me because my warranty has expired... Is there somewhere else I can go to to get a disc without key on this product? I just need the diskette. If anyone can help me please, I would be very grateful. Thanks :)

  Hello

  You can't reinstall Vista on a recovery partition you have installed another operating system

  read this:

  Solve a common problem of recovery.
  If the original operating system is changed to a non - Vista OS, the Recovery Manager cannot be launched either office or by pressing f11 at startup. You can use the recovery disk to restore the computer to the original state of Vista. If you are using a non - Vista OS, you can use a third-party partition management program to recover hard disk space.

  ________________________________________________________

  Contact the manufacturer of the laptop computer and ask them to send you to vista recovery disks to reinstall the operating system back as it was when you bought it

  they do it for a nominal cost of $

  you say, that they will not!

  ________________________________________________________

  or borrow a vista microsoft dvd; not a HP, Acer recovery disk etc

  Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer

  they contain all versions of vista

  This is the product key that determines which version of vista is installed

  http://www.theeldergeek.com/Vista/vista_clean_installation.html

  ____________________________________________________________

  How to replace Microsoft software or hardware, order service packs and replace product manuals

  http://support.Microsoft.com/kb/326246

• How do I upgrade/switch to Windows 7 Home Premium 64 bit OF Windows 7 Home Premium 32 Bit?

  I noticed that my laptop has 64-bit capabilities. My processor is AMD Athlon Dual-Core QL-60 1.90 GHZ. Can someone give me detailed instructions on how to move to Windows 7 Home Premium 64 Bit? Also, I have 2 GB of RAM, and I don't know if I should get another 2 GB for the transition to work. Thank you. ~ Mystery.

  "Mystery100" wrote in message News: * e-mail address is removed from the privacy * .com...

  @LVTravel my laptop came with Windows Vista installed, but last Christmas, I installed Windows 7 Home Premium. It actually came with 64-bit disk, and the activation key.

  I understood the part when you say that I have to reinstall all my programs basically. I'm not sure what you mean by data files, they are available when I insert the backup? Where can I insert the disc to backup at all? My question is, how to restore these "data files"? Also, sorry for all the questions. :)

  ~ Mystery.

  Data files are the files that you create with your programs such as movies of documents, spreadsheets Excel, Word, photographs, etc.  If the files have been copied on the device to backup using Windows Explorer you can just copy them to the refurbished computer.  If you used a backup of some program you type then need to use this program to put the files back on the computer.  Some backup programs will create an image of the drive hard and if you do not select the data files only you could possibly replace your 64-bit operating system installation.  I would recommend that you get your cousin to ensure that data is backed up and the restore is performed correctly.
   
   

• HOW TO RECOVER SPACE HDD ON WINDOWS 7 HOME PREMIUM, 350 GB UP TO 88 GB

  I NEED TO KNOW HOW TO RECOVER MY HARD DRIVE SPACE, I HAD 350 GB NOW I'M 88 GO, I HAVE WINDOWS 7 HOME PREMIUM

  In this case, Norman, I recommend that you get the assistance of first-hand.  I don't think we can help you here corrected.

• How can I reinstall BitLocker on Windows 7 Home Premium.

  I would like to re - install BitLocker, after uninstalling previously by the "Control Panel".  I proceeded to search my hard drive for files, including the words "BitLocker" and found several remnants of the request, including "BitLocker to Go.mui" and three executable files. At the launch of the "BitLockerWizard.exe" application, a 'System error' window explains that "the program can't start because BDEHDCFGLIB.dll is missing on your computer. Try reinstalling the program to fix the problem.
  The Panel gave no indication of which allows me the opportunity to re - initialize program.
  It is a service of BitLocker, and when I start it up, nothing seems to change, and there is no process newly listed in the Task Manager console. Description name service "Host BDESVC" and explains that he is there to facilitate many BitLocker operations.
  Short of completely reinstall Windows 7, how do I re - install Bitlocker?

  BitLocker is not available in Windows 7 Home Premium.

  It is only available in editions of Windows 7 Ultimate or enterprise.

  You can use a third-party free alternative like TrueCrypt:

  http://notebooks.com/2010/12/30/how-to-encrypt-your-hard-disk-with-TrueCrypt/

  If you want to use BitLocker, you must upgrade Ultimate:

  A 'step by step' to go through an upgrade to a lower edition of Windows 7 to a higher edition of Windows 7:

  http://windowsteamblog.com/blogs/Windows7/pages/the-Windows-Anytime-Upgrade-experience-for-Windows-7.aspx

  Paths to upgrade Windows 7 (supported upgrade scenarios)

  http://TechNet.Microsoft.com/en-us/library/dd772579%28WS.10%29.aspx

  Windows 7 - Anytime Upgrade - frequently asked Questions:

  http://Windows.Microsoft.com/en-us/Windows7/Windows-Anytime-Upgrade-frequently-asked-questions

  Windows 7 - upgrade Express features:

  http://Windows.Microsoft.com/en-us/Windows7/products/features/Windows-Anytime-Upgrade

  Resources:

  http://notebooks.com/2010/12/30/how-to-encrypt-your-hard-drive-with-BitLocker/

• Is there a way to see the old chkdsk log on windows 7 Home premium?

  You know, when you run the command CHKDSK's BACK to Windows 7 Home Premium at the end it is a summary of the results.  But the summary is only visible for a few monents (not long enough to actually read) and then the system moves to open a Windows session.  Is it possible to display these results once you are in the WIndows environment?  Some kind of log file that can be referred to?  I'm talking specifically of the complete CHKDSK with both the boxes checked

  "Automatically Fix file System Errors ' and ' will search for and attempt to recover bad sectors...

  Thank you.

  Newspapers can be read in the event viewer

  http://www.SevenForums.com/tutorials/96938-check-disk-chkdsk-read-Event-Viewer-log.html

• How will I know if my Windows 7 Home Premium x 64 or x 86?

  I have a 64-bit computer, but there are files on the C drive for Program Files and Program Files (x 86). I have questions on this topic, but do not actually need to know, so far. I'm trying to restore my backup files in when I upgraded Vista to Windows 7 Home Premium. I discovered an additional file/application had to be downloaded to achieve this, but unfortunately I do not know that you choose. x 64 or x 86.

  I have a few questions:

  I chose Custom installation because I wanted to wipe my hard drive and reinstall just some things. I just discovered that a file was created on my computer as "old computer." If she was going to do this, why did I have to lose a day and 17 discs, backup files?

  When I am able to restore the backup, I can choose what get-restored or am I stuck with everything? I think I deleted everything I didn't until I did the back-up, but just in case I would like to be able to choose what is restored to my computer.

  I have a ton of papers of college in the end so I have to get my MS Office Suite restored to this computer, so if someone could help me quickly, I would really appreciate it.

  Thank you!!

  See: http://windows.microsoft.com/en-us/windows7/32-bit-and-64-bit-Windows-frequently-asked-questions

  To find out if your computer is running a 32-bit version or 64-bit Windows in Windows 7 or Windows Vista, follow these steps:

  1. System opened by clicking on the button start , right click on computer and then click Properties.

  2. Under system, you can view the system type.

  TaurArian [MVP] 2005-2010 - Update Services

• How can I get a valid Windows Vista Home Premium product key for my Acer Aspire 5050?

  My hard drive failed in my Acer Aspire 5050.  Replaced, reinstalled Windows Vista Home Premium with the appropriate product key, but Microsoft says that it is invalid.  Microsoft wants to buy me a new copy of Windows & there is no available from Acer for my laptop recovery disk.  What can I do?

  The product key on the bottom of the laptop is an OEM product key.  This product key does not work for the commercial versions of the operating system.  The original shipping charge might work on the system without entering a product key.

  If you did not, or are no longer able to get the recovery media, you will have to buy an operating system of your choice for the installation.

  Please see this link:
  http://community.Acer.com/T5/community-KB/installing-a-different-operating-system/Ta-p/48739

• How do you know if my windows 7 Home premium 64 or 32-bit

  A friend gave me a unused PC with Windows 7 Home Premium and I would like to know if the OS is 32 or 64 bit

  My PC running the 32-bit version or 64-bit Windows?

  http://Windows.Microsoft.com/en-us/Windows7/find-out-32-or-64-bit

  Click Start, right click on computer

  Look under the kind of operating system.

• How to display Chinese characters in Windows 7 Home Premium?

  I see Chinese characters very well in my browser, but all I see are boxes instead the characters for the programs on my computer (running Windows 7 Home Premium). What I want to know is this: is there a way to display Chinese computers in windows?

  Before I am flooded with a bunch of useless answers telling me to install the "language pack", I must repeat: I'm under Windows 7 HOME PREMIUM. Yes, I tried going to Microsoft Updates and download the language pack. Unfortunately, I can't see the link for me to download the language pack, since I am running Home Premium, but in operating systems, the ability to see the other languages has been included. In other words, just because I'm running updated the operating system compared to some of the older operating systems, I don't see another language, unless I pay update.
  Seriously, Microsoft? Seriously?
  Also, I have in fact look around here to try to find a solution to my problem. Unfortunately, no one ever really answered it. Because the only problem here seems to be a complete disregard of the user and the will to pull as much money on Windows users unhappy. Windows, that is why your stock is lagging. And why I must say that you are unable to many ways to Apple. But if there is a solution, please, by all means, I'm willing to change my assessment.
  Sincerely,
  A frustrated and unhappy Windows user.

  Well, the answer you don't hear or see is the only solution.

  Take or leave.

  Note: Multilingual User Interface Pack MUIs are available in Windows 7 ultimate through Windows Update as optional updates. They are not installed automatically. If you are using Windows 7 Enterprise, contact your system administrator for more information about installing additional languages.

  Follow the steps mentioned below to get additional languages.

  (a) open Windows Update by clicking the Start button. In the search box, typeUpdate , and then, in the list of results, click Windows Update.

  (b) in the left pane, click check for updates , and then wait while Windows searches the latest updates for your computer.

  (c) if updates are found, click on Select optional updates.

  (d) select the MUI that you want, and then click OK.

  (e) click install updates.

  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  For more details, see the following articles:

  Download a language pack to get the recognition of handwriting for another language:http://windows.microsoft.com/en-US/windows7/Download-a-language-pack-to-get-handwriting-recognition-for-another-language

  Reference:--

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-files/i-have-Windows-7-English-version-it-cannot-display/3a13c2d6-7170-4ef6-b2b0-01500ae7e790?page=1

• How do I re - install my window (vista Home premium 64-bit)

  When I bought my laptop, it had an original window but my hard office was damaged and I had to change, change the computer store but they put non-original window as they said my recovery CD THAT is also damaged, I need to download my original window I have the serial number

  Hello

  There is no Windows Vista downloads available from Microsoft.

  You can contact your computer manufacturer and ask them to send you a set of recovery disks.

  They should do this for a small fee.

  "How to replace Microsoft software or hardware, order service packs and replace product manuals.

  http://support.Microsoft.com/kb/326246

  Some manufacturers have more available Vista recovery disks.

  If this happens, you may need to try this instead:

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon.

• How much of my licenses of Windows 7 Home Premium Family Pack do I used so far? How will I know?

  Howdy ladies and gentlemen! We just moved and have not seen my computer stuff in about 5 months. Just long enough to forget how many licenses I used my pack Win7 Home Prem Upg retail box 3. Which one of the smarties can you help me understand how / if none of them have been used. I think I still 2 has left this 3 pack, but how do you know? I don't want to go through the process of trying to upgrade a Vista computer I inherited only if I do not have a license to the left.

  Thanks in advance!

  Glen

  Unfortunately, we will not be able to help you with that. Even if you were to exhaust your existing licenses, you can reactivate by phone:

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

• How can I disable LLMNR in Windows 7 Home Premium?

  As it is said, really, I found a way to disable the LLMNR Protocol in premium home Visa (by registry
  HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Win Windows NT\DNSClient
  \EnableMulticast|) Win 7 Pro or by using the Group Policy console, but nothing for 7 Home premium.

  Any ideas?

  Hello

  Try turning off the network discovery. Disabling network discovery will cause LLMNR (Link-Local Multicast name resolution) do not respond.

  Reference: http://windows.microsoft.com/en-US/windows7/Enable-or-disable-network-discovery

  How to take advantage of the Link-Local Multicast Name Resolution.
  http://blogs.technet.com/b/networking/archive/2008/04/01/how-to-benefit-from-link-local-multicast-name-resolution.aspx

  Thanks and greetings
  Umesh P - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• How can I disable FIPS in Windows 7 Home Premium

  I tried to install IBM SPSS Data Collection 6.0 and have had problems with encryption.  IBM has said that I have to disable FIPS in Windows, but I can not find it.

  Hi John,.

  Welcome to Community Forum Microsoft and thanks for posting the question:

  That you want to disable the FIPS try these steps and check:

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  Back up the registry:

  http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

  a. click Start, type regedit in the search box start and click on enter.

  b. in the registry editor, navigate to

  HKLM\System\CurrentControlSet\Control\Lsa\FIPSAlgorithmPolicy\Enabled

  c. this registry value reflects the current FIPS setting. If this setting is enabled, the value is 1. If this setting is disabled, the value is 0.

  d. disable double click on the file and select 0.

  e. restart the computer and check.

  Visit this link for more information:

  System cryptography: Use FIPS compatible algorithms for encryption, hashing, and signing "effects of security setting in Windows XP and later versions of Windows.

  http://support.Microsoft.com/kb/811833

  Hope this information helps. If you have any other questions feel free to respond and we would be happy to help.