How do Officejet 6700 Premium delete spaces after a scan
So basically I am wondering if there is a preference or a setting somewhere to make sure that when I scan photos I must not cut back on white space. My old HP Photosmart had this preference, but it doesn't seem like this one don't. Any help is appreciated.
Very well, thanks for your help! * Good *.
Tags: HP Printers
Having finally decided to take the plunge to upgrade to Windows 10, I discovered that my Officejet 6700 Premium previously peripheral work will scan is no longer.
My connection to the device is via a wired connection with a static IP address on the printer. It all worked perfectly under Windows 7, but now, I can only print to the printer to win 10.
I tried to uninstall the previously working software (under Win 7) and downloaded the latest version of the HP (OJ6700_1315 - 1.exe) software, which BTW is not a patch on the previous software that I'm used to using - but it did not help. Still no joy with the scanning feature.
I tried to uninstall all software, so I tried to launch the Wizard installation HP which seemed to re - install the last set of software (as above) with the same results - I can print it, but if I try to scan using the Officejet 6700 App it appears a dialog box saying "inaccessible Scanner. Scanner communication cannot be established. Make sure that your product is powered, check the connection and esnure that your network runs correctly. ...". Amazing result given that the application displays all levels of printer ink, and I can print - every time!
I tried disabling the firewall - no difference, still do not see the scanner.
Tried using other windows applications; Paint, etc. - no joy.
I also tried the "HP Print Scan doctor and" nothing does - even, he gives up and says to contact HP support, with no details about what to tell them!
I hope someone else out there could have had the same problem and found a way to make it work?
In case anyone is interested, I bit the bullet and did a new install of Windows 10 on a formatted drive. I then installed the same software that I had tried on the "upgrade to Windows 7" windows, 10, and everything works as expected.
Therefore, there is definitely something wrong with the upgrade process, and the removal of the HP scanning software & resettlement never did his job correctly.
I look closely at the list of DLLs etc., charged by the printing software, but could not detect anything immediate.
Then, certainly in my case, a new facility was to solve this problem.
See you soon,.
Thank you for your help.
I have a printer/all-in-one Officejet 6700 Premium.
Most of the documents that I print is for internal purposes, so "Draft" quality is sufficient.
The default factory on the print quality setting is 'Normal '. I know how manually enter and restore the "draft", but I'd rather have the defaultproject, so I have to reset it manually each time.
I could not find how to permanently fix the draft quality defect.
Again, thank you for your help.
which is fully answering my question indeed
Please follow the steps below to change the quality of the printer:
- Click the Start button.
- In the menu, click devices and printers.
- Right click on the HP Officejet 6700 icon.
- Click Printing Preferences.
- Enter the tab paper / quality .
- Select the project in the area of quality parameters.
- Click OK to save the settings.
Now any future printing will be in draft quality.
I have trouble getting the Apple AirPrint on my HP OfficeJet 6700 Premium. I read somewhere that the application should be on all printers since 2010. We have just received this printer a year, maybe 2 years ago. Is there a way to make this work?
Hi MereLinn, your printer supports Airprint if it is connected wireless to router. Here is the document that I used when I configured my printer 6500, it'll work very well for yours as well. Please load this document, click "Show all" and follow the steps to get the installer: http://support.hp.com/us-en/document/c02623193 good luck! Please post if you need more help
I have a Compaq laptop originally with Windows Vista Home
High-end operating system. I have recently installed Windows 8.1 and
had some minor problems with the programs, but they have been sorted
I tried to reinstall the HP Officejet 6700 Premium software,
Download the software OJ6700_1315.exe of your drivers and
Software Web site.
When I run the software I get the following error
Call to DriverPackageInstall returned error 5 package ' C:
\Program Files\HP\HP Officejet 6700\DriverStore\Pipeline
\hpvpl09.inf': a caller of DriverPackageInstall must be a
Member of the Administrators group to install a driver package.
As I'm logged in as an administrator, I tried right click
on the software downloaded OJ6700_1315.exe and execution of the
software as an administrator. I still got the same error
Message. I thought it would be because of network problems and
joined the network (the other computer running Winows 7).
But always without success. I tried to remove the HP folder of
Program Files and then run the program as an administrator
but still got the same error message.
Any advice on how to get accepted as a member of the
Group directors would be appreciated, or in another way
to deal with this problem
I'm happy that we did the SFC/scannow. The question is are known is the operating system, not the HP software. At this point, my suggestion is to perform a system recovery to Windows Vista. A system recovery will bring the computer to a new similar State, for this purpose, you will need to back up all your personal data and files.
If you want to continue, click on the following link and follow the instructions. > Undertook a restoration of HP (Windows 8) system
After system recovery is complete, use the HP Support Assistant to ensure that the computer is up to date. Support Assistant will check for all updates to Windows and HP. If not already have the Support Assistant installed, click here to download and install it. > HP Support Assistant.
The best course of action at this time would be to install the HP on Vista software to see if it installs now. Of course, a successful installation confirms the theory that the operating system itself is the root cause of the problem at this point.
Post back with the results and product number. With the Compaq product number I can check the specifications, make sure that the BIOS updated and you ensure that we have a smoother installation of Windows 8.
OfficeJet 6700 Premium all-in-one - H711n - when I print wireless from the desktop (HP), I get an extra space at the top of printed pages and the bottom is cut off. It is a new problem. Printer did not have this problem in the past. Scan doctor says everything is ok.
Hi @katy36 and welcome to the Forums of HP!
I see you have output problems. I'd love to try to help you, but I need some information first. I'm a link a few HP Support documents below that will show you how to find what operating system you are using. In addition, if you are using Windows, please indicate if your operating system is 32-bit or 64-bit.
Also, do you have questions by making a copy as opposed to an impression?
Please let me know what you find. Thanks for posting on the HP Forums!
I have a problem with my printer HP Officejet 6700 Premium  when sending a fax using the control panael (screen) of the printer. It quickly shows me a blue screen with a power icon and a Error Code: "B82658AC". It shows a masseg tells me to turn off the printer. But when to send a fax via the HP utility program, sends it without problem. This is the first time to send a fax after the purchase of the printer. I did the Test and show me that everything is OK. My printer is connected directly to the telephone line. I just want to now how to fix this problem, thanks.
Hello! Welcome to the @Mu96aFa forums
I read on the fax number you are having and I personally would say the troubleshooting guide below for you. The guide check all connections fax, settings, etc..
Also, check and update the firmware if necessary: having the latest Firmware and product updates
If troubleshooting doesn't help not solve your problem, then I would say call the HP Technical Support to see other possibilities for you, as a replacement or trade. If you call in North America, the number is 1-800-474-6836 and if you call outside the United States / Canada, region of: click here.
Please can someone help?
Printer name model e-all-in-one Officejet 6700 Premium
Win 7 SP1 64 bit
Wired ethernet connection
On two-sided printing, the second side of printing on all pages is ghost. This is in particular the noticebale on verticals.
This is true for all the qualities of printing on any documents .pdf or. doc.
I use all the HP printing paper and original cartridges.
I aligned the print head and checks suggested on the help pages.
I contacted HP support, which were brilliant and replaced the printer and the duplex unit.
They suggested that it was because I was using Office 2003 SP3 and Windows 7 but I find this problem on too but not in Wordpad v6.1 .pdf files
The problem does not occur when scanned or copied documents are printed
Is there a solution out there on this new printer please?
I carefully read through a VionAiry pointer to the post of ItalSanif with links to more articles.
There were two main suggestions as to how to proceed. I didn't uninstall the "bloatware" and back to base for the HP Officejet 6700 Premium drivers, but I installed the drivers from the series HP Deskjet 6980 in accordance with the procedure at this link http://h30434.www3.hp.com/t5/Printing-Issues-Troubleshooting/HP-7510-Duplex-Problem-y-axis-scaling/td-p/1754773 and listed below, with a few mods to include activation of unit duplex in one set of instructions.
And you know what? This MARKET! Ghosting on the second side of all pages printed double-sided disappears to be replaced with a nice crisp clear impression. At present, all the other functions, including scanning seem not affected and function as usual, although of course the new driver (HP Deskjet 6980 series) makes the leaves of different properties.
In my environment, I have also 3 XP machines in network connected wireless to the printer via the router and the PC Win7x64 connected by ethernet to the same router. Meant this download and the installation of the driver HP driver the HP Deskjet 6980 series for the XP PC Web page not the Win 7 x 64 because they were not present.
I modified a bit routine and reproduce it below to help others. A/c for the original post, that was provided by the HP Technical Support. Why nobody's support services seems to know about or drivers have not been fixed I would never know.
First turn off you will want the printer already available on the computer before you continue.
For Win7 PC (XP is similar but not identical)
- Go to Start -online device and printers => then click on the "Add a printer" button in the upper left corner of the device window.
- Click on the button "Add a local printer" (choose this option if you do not your configuration)
- Check the box "use an existing port.
- On the drop-down list, select the option for example CN115130TP05JW , but use the correct name for the PRINTER port which is the serial number of your printer (do not use the fax entry)
- Now in manufacture of list on the left, select "HP".
- On the list of Printers to the right, select "HP Deskjet 6980 series (HP)" "
- "Once the pilot moved to enter in the" 'devices and printers ' window and right-click the newly added "HP Deskjet 6980 series" and select ""printer properties ' on the drop-down list. "
- Go to the "Advanced" tab, and then in the drop-down list next to the label of "Driver" select "HP Deskjet 6980 series.
Click on the button 'Apply' - the configuration window should change it's shapea bit.
10. in the HP Deskjet 6980 window properties, click on the tab "device settings" on the top of the window.
11. in the list of parameters, search for "Unit duplex (for printing on 2 sides) ' and select it.
12. once highlighted, select in the drop-down list ""Installed "; "
13. When finished press apply
14 now, go to what you use to print documents and select "HP Deskjet 6980" as your printer. Activate duplex printing and you should see the pages to print correctly.
15. you can also change the name of the printer in the "Général" tab I changed it in mine to "HP Officejet 6700 with HP Deskjet 6980 pilot set shadowd duplex printing".
I had a little problem in that, for some reason any in the document (e.g. Word / etc\ .pdf) box under the effects tab my radio button has mysteriously been on 20% until I changed it it was hard to see that there was no ghosting dialogue printer properties.
So after complete 1 reconstruction of the printer of the original with the parts sent to HP services support for November 2012, an escalation at magnifications greater within HP (no answer) and a new printer of A...n, VisionAiry has pointed me to a solution that I had tried with DJ 450 drivers, nothing works, after a Shane_R post dated last year.
So thanks to you and also to 007OHMSS who worked on this problem and original posters
All I can say is that it worked for me and I am so grateful to everyone on this forum to ensure that I am sure of my eyes and mental health, looking more printed duplex printed with a shadow/ghosts and to be what they were not prepared.
Congratulations so all round and thanks again
How can I delete memory on a HP Officejet 6700 Premium?
Hey there @YourForester,
I hope you are well.
On your Officejet 6700, you can select the Menu configuration, tools, and Restore Factory Defaults to reset the printer and then back to its original settings. This should dispel any information you entered in the unit.
If you want to send me a "thank you" today, click on the thumb to the top below!
I hope this helps!
I have problems printing with HP Officejet 6700 Premium. My impression always asks on the ground by having "quequed" and I can't seem to remove the item from "quequed" if I try to print my requests. I tried to shut down my computer and restart it, but my print request is still in status 'stone '. When I tried to "cancel all documents print", it did not because the article is still in status 'stone' and has not been deleted. I tried to get out all my caps that were connected to my computer and my printer and restart the computer, and concluded that the question I wanted to be removed from the print job was still in status 'stone' so I couldn't print the next job. This is not the first time it happened, but I'm frustrated and don't know how to fix the status of 'stone' so I can use the printer to print my requests.
From the desktop, hold down the Windows key and press R. In the run window, type services.msc and press to enter. Scroll down to the print spooler service, right click and select Properties, then click the Stop button. Now search for C:\Windows\System32\Spool\PRINTERS, then delete the tasks within this folder - you may need to click a command prompt to get the authority to open the PRINTERS folder.
Restart the computer and you should find that the documents have been deleted.
DP - K
Printer = printer HP e-all-in-one Officejet 6700 Premium
Model = H711n
Number of product = CN538A
Firmware version = MPM5CN1450AR
Location = Ireland
Printed pages total: 152
Scanned pages: 58
Other details available on request...
I've had this printer for several months now, I have had no problem connecting to my wireless network and connect computers, telephones and other equipment to this.
A few days earlier, when starting the printer display flashes with the useless error message, error in the printer, turn the printer off and back on.
I have power cycled as requested and received the same message, over the power of the cycle he mentions turning off the power button and no DISCONNECT of the sector. Until then I had never disconnected from the sector. After that I have several attempts to power cycle the printer is off and removed the sector, has waited half an hour and powered on again once.
Still stuck in a loop. He also briefly flashed a blue screen with the error B81431CB. So brief that it is almost useless. I had the boot sequence video and pause playback to read error!
After some research, I decided that she was experiencing problems connecting to the WIFI network. So, I turned the wifi on the router and the printer network started as usual. Internal menus are now available and I can print status and so forth, so at this point I can exclude defects of ink or mechanism.
I went in on the printer network settings and reset the network. I'll also through the printer to factory default settings. I have reactivated the WIFI network to the router then went to install the printer again. Digitized for wifi networks and found mine. Entered the password for wifi and the printer could not connect. Everything is good, correct ssid, signal. Report shows wifi password is incorrect.
I have try several times to connect wifi password is certainly correct, but the printer refuses to recognize the correct password. I tried a different router, the same result. Says incorrect password. Also I tried WPS and a PIN, said still fails to connect.
At this point, I have disabled all security on the wifi network. Bingo, printer connects to the network, but starts with the loop of error mentioned at the start of the tour and turn it back on. This above has been tried several times, the factory reset, everything ok, turn off the wifi security, the printer connects and goes in a loop.
So, at this point wifi is confirmed to be defective. I decide to directly connect a LAN cable. Once the LAN cable is connected, a few seconds later the printer detects the network and goes back into its loop error. It will not just connect to a network via wifi or LAN. He previously worked on the network, and nothing has changed on the network, not new parameters or no new devices.
I connected a laptop to the printer via USB and that seems to work ok, but a USB connection is not ideal and defeated the convenience of a wireless printer. I also tried to reflash the printer in case there is a corruption of the firmware, but the utility detects that the latest firmware is installed and that it is not engaged.
OK I managed to make it work and I will try to explain the steps of my best.
As mentioned previously, I tried another router, I tried the wiring, and I tried to reset the router and the printer. Nothing seemed to work.
Out of curiosity I just put my phone in a WIFI AP. Tried connecting the printer and it worked. The printer connected to the WIFI phones.
So I know that the printer works on at least one access point.
Thus, in the settings of the router and firewall. The only thing enabled in the firewall have beenIPv4 firewall protection
Since I upgraded my computer to Windows 10, I'm unable to use my scan on my HP Officejet 6700 Premium function. I can't even open the scan dialog box to look at the options etc. I tried to find 'Scanner and printer' in painting, but it does not recognize. Any suggestions? I already deleted the printer and re-installed. It was working fine before on Windows 8.
Thank you for using the HP forum.
You can download and install the software COMPLETE features of HP printing for your operating system:
Once you have downloaded and installed the software, FULL of features, you will be able to print and scan.
Hope that helps.
I used my 6700 for almost a year and a half to work on a secure server of company where I couldn't use many features. I recently brought home, and now I use it on my personal network of houses. I followed the instructions on reprint the code of request but were unsuccessful. I constantly get a message that my printer is unable to conect to the server. My network wireless printing has been set up and I was able to print from my phone, laptop, & office. Can someone help me please my claim code?
Welcome to the Forum from HP Support.
I see that you are unable to activate the services Web on your HP Officejet 6700 Premium e-all-in-one printer. I would like to help.
When users encounter this type of problem, I usually suggest from scratch with the radio of the printer and webservices configuration. You can clear all of these parameters in a swoop by the factory default restore * your printer.
* Note that this step resets the setting up your printer wireless, address ePrint and other custom print settings. If you have created a custom address @hpeprint.com it is permanently erased. For more information about custom addresses ePrint, click here.
- The printer's front panel, press the Setup/key icon and then tap tools
- Select Restore to factory settings
Then, touch the wireless icon () and run the Wireless Setup Wizard to restore your network connection.
Make a note of the IP address of the printer. Then, follow these steps to configure a manual DNS:
- Enter the printer's IP address in a web browser (Chrome, Firefox, Safari, Internet Explorer) and press ENTER to go directly to this page.
- Click the network tab.
- In the submenu on the left, click Networking.
- Then click on the network (IP) address.
- Click Manual DNS server.
- DNS preferred as 22.214.171.124 manual entry
- Auxiliary DNS server entry as 126.96.36.199
- Click on apply to finalize this change.
Then, press the icon of Webservices () and reactivate your webservices (necessary for scan to e-mail, ePrint and other features).
Please let me know the result of your troubleshooting by responding to this post. If I helped you to solve the problem and that you liked this post, feel free to give me virtual accessories by clicking on the 'Thumbs Up' icon below and by accepting this solution.
Thanks for posting in the Forum from HP Support. Have a great day!
Tried to use HP AIO remote with my printer HP officejets 6700 Premium. I get a message that is offline. However, it is not. I tried to turn my printer market and restarted my computer. It did not work. I noticed that the
the IP address for my printer HP officejets 6700 Premium on the app is not the same as the address of my printer. If this is the problem how can I fix it? In any case, please help. I use a Dell with Windpws 10 laptop
Hello @wwwally, greetings!
Thank you for visiting the Forums from the HP Support! It's a good place to find the help you need, other users, HP experts and other support staff.
Going through your post, application remote control HP AIO is mainly used in mobile devices and not in laptops.
I suggest you download and use HP Scan and capture app to scan from your laptop Win 10. You can go to http://hp.care/2bUVkrw to download and install HP Scan and capture the app.
Please let me know if that solves the problem, or if you need assistance.
See you soon
Please click on 'acceptable' on the post that solves your problem to help others to find the solution. To show gratitude for my help, please click the 'Thumbs Up icon' below!
My HP Officejet 6700 Premium at work was scanning PDF and conversion to editable WORD format, as my work converted to Windows 7, the feature is no longer available. (I have the original cd for printer). This can be corrected?
Welcome to the DNico forums,
I understand that you are looking to analyze text editable with Windows 7. I will do my best to help!
You will need to install the full features software: HP Officejet Full Feature Software and Driver
Click this link for instructions on scanning in the form of editable text (OCR) click on How to scan with HP software, how to scan as editable text: how Scan: Windows 7
Here's a screen shot I took as an example:
Maybe you are looking for
I already have a Skype account, but I got the Skype company for $5.50 per month. (1) do I download a separate company of Skype? If Yes, where can I find it? (2) if I do not need to download a separate application for the Skype business, how to enable
Can I install a replacement on a hp Pavilion dv9500 SSD?
I can't even remember when it happened, but I found something called MacBooster3 on the upper right side of my menu, where the noise, the date and the time are. When I clicked it, it turns out be something that looks like a sign of dashboard with ins
Can't find my office key! What I owe any alternative at Dell that buy the software? It is preinstalled on my small office Dell computer in October 2014. And because of my stupidity, I had to do a factory restore like my computer has been hacked and
Hello For the record, I use a Compaq Presario AMD Athlon (TM) 64 Processor 3300 +, 2411 MHz/1.93 GB RAM, running Windows XP Home Edition, SP3, with IE8. For these last months, I've been using a HP Photosmart C5580 all-in-one printer and I am more tha