How do root WT19i using ICS 4.0.4?

You guys can tell me the way to the root WT19i that uses ICS 4.0.4? THz before hand...

Ofcourse

You must follow every step

Tags: Sony Software

Similar Questions

  • {GUIDE} HOW DO ROOT ICS 4.0.4 XPERIA ACTIVE

    Hi everyone, I made a tutorial on how the root 4.0.4 (ICS) on active...

    Just follow the steps below, but carryful, I'm not middle for any damage on your phone then do so at your own risk! Of course, I will be able to help... feel free to comment and give feedback!

    Good luck rooting

    Step 1:

    * Download Flashtool (windows program we work with)... you can find the link to download here:

    http://Androxyde.github.com/

    And install it...

    Step 2:

    * If you have the ICS download this:https://hotfile.com/dl/162560090/00fcfdc/Xperia_Active _ (ST17i) _4.0.2.A.0.42_CE.ftf.html

    And send it to C:\Flashtool\firmwares...

    Open Flashtool, click lightning icon, select flashmode... Select firmware flash 4.0.2.a.42 and follow the instructions on the screen.

    Step 3

    * START your phone, select "USB,"UNKNOWN SOURCES"DEBUGGING and connect your phone to your pc in"MASTER"mode...".

    Open flashtool and click the "lock unlocked" (one step to the right of the icon of the Lightning)... make it roots your GB.

    Step 4

    * Download this file: http://www.mediafire.com/?b4sxp7a3i8gc48i and extract to an empty folder, run "01-local-prop" and follow the instructions...

    When did this start your phone up and ICS Flash like you with Go (ICS FTF.download link:http://www.mediafire.com/?d00i7nzt75l2m45 ) WARNING! Uncheck the 'clear data' on the flashing for ICS, otherwise your phone will die!

    Then run '02-push-root-files' and follow the instructions...

    When it is restart your phone and you have official ICS 4.0.4 and root!

    Please comment if you have a problem and I 'l find the solution, or simply to give a feedback if it worked well.

    !!! GREETINGS FROM SWEDEN!

    Have someone tried to root 4.0.4 with this post? However thank you bogdann, I tried to make it easy

  • How to make hotspot using my laptop computer wifi

    I use the connection internet evdo in my laptop & I have a Nokia E71 mobile. I want to share internet to update using laptop computer wifi connection to use my mobile.

    Hello


    There is no way of setting to fulfill your need as material Wi - Fi on the laptop would not receive the signal does not pass.

    However, you can try to set up a Wi - Fi hotspot on your laptop and check if your phone can spike the signal.

    Unless you have configured a virtual adapter or your laptop has Wi-Fi to transmit material, you won't be able to share the internet on your phone.

    Please follow the links below to solve the problem.

    Method 1

    Set up a computer-to-computer (ad hoc) network

    See also,

    5 steps: how to set up your network wireless home

    Method 2

    If the step above does not work, then you must get a wireless / Wi - Fi router and try.

    Using ICS (Internet Connection Sharing)

    I hope this helps.

  • How do root 4.0.4 android?

    How to root the Sony Ericsson Walkman Live (WT19i) 4.1.B.0.431 (Android 4.0.4) running?

    See here

  • Hello, my phone pulled from my class at school and it has no data on it, so I did not no how to locate without using find my iphone is there another way I could find as soon as possible

    Hello, my phone pulled from my class at school and it has no data on it, so I did not no how to locate without using find my iphone is there another way I could find as soon as possible

    Go to iCloud.com

    Then sign in with your Apple ID and password, then click the Find iPhone.

    If this does not help, see: If find my iPhone is not activated on your missing device > what to do if your iOS device is lost or stolen

  • e-studio 202l & Copier 600 - how to install and use?

    My Agency (I work for a State gov ' t) is one of these copiers. I want to use the USB interface on a local PC for scanning and printing. I've been unsuccessful with the installation. The TWAIN scanner driver asked me to point to a network device. The State Government cannot afford to install a scanner on the LAN unless it supports Kerberos.

    How to install a driver TWAIN on a PC to use the USB scanner? How can I print using a USB port? Here's what I've done so far.

    I found the file to download for copiers. I ran the self-extracting exe and then unzipped the file for the 202 l. I ran the webinstaller to the printer and the scanner. The printer acts like it prints, but nothing happens.

    After you run the webinstaller to the TWAIN driver, I went in Word and went to insert an image from a scanner. The twain driver ran, but asked me to find a device on the network. I don't see a choice for a USB scanner.

    What should I do to get the photocopiers of scanning and printing?
    Thank you
    Al

    Did you look at the user manual? Maybe it has instructions for installing the USB or the limitations of USB.

  • How long can I use Xcode debugging iphone iPad app?

    I'm developing an application based on reading excel sheet. I want to do app test cases every day, I'm uploading excel sheet to Amazon to see my data in the iphone. So I use Xcode to debug in the iphone 7 5. So I want to use this app for two months. I have not downloaded in the App store. So how long can I use this app in my iphone? Please give me some suggestions. Thanks in advance.

    If you have installed the app from Xcode, you can use it forever.

  • How can I make use of TC partitions and make sure that the file analysis is on the right partition?  I do not see the partitions that I have done in the Finder, but I can drag and drop the files in the folder 'Data' unique under Finder/Shared/TC.

    MacBook Air, OSX 10.10.3, 128 GB; 2 TB Time Capsule ME177LL/A.

    Final objective: use Time Capsule as a Time Machine for my MacBook Air and as a storage solution for large files that I don't want permanently on my MacBook Air.

    So far, I've implemented the TC and set up Time Machine on the TC.  I was able to create 2 partitions on the TC using disk utility then that TM was a backup and the disk was recognizable in disk utility.

    Under Finder/shared, I see the TimeCapsule 'airport', and when I click on it it is a file called "Data".  I was expecting to see my two partitions here.  Under 'Features' is a ' Zissou31 MacBook Air (3)"sparsebundle file and I can also create folders here and drag and drop files on the TC here.  I can see the partitions in disk utility, but how do I see/use the partitions I created in the Finder?

    I fear that this may not be set up correctly and I'm either losing on an entire partition I created or these files dragged/dropped may be at risk of overwriting of TimeMachine.  How can I make sure that the file analysis is on the appropriate partition?

    I disabled TimeMachine and go back to see if I could 'point' to one of the partitions, but the "Data" folder is the only thing that TimeMachine seen.  How do I point time Machine for one of the partitions?

    Thank you!

    In addition, in disk utility, I can see one of the partitions TC is related to the time Machine, indicated by the icon Time Machine green bottom left, but two partitions seem to fall under "Zissou31 of the MacBook Air (3) .sparsebundle.

  • How can I print using the cover

    How can I print using the cover

    using the cover?  How is that? To be more specific, which is a software or hardware?

  • How to perform deconvolution using FFT

    Hello everyone

    Is there anyone who knows the algorith or can give me a vi that shows how to perform deconvolution of the two functions by using the FFT. Using labview for deconvolution, the suggested algorith is.

    1. Calculate the Fourier transform of the input sequence X * Y.
    2. Calculate the Fourier transform of the input sequence Y.
    3. Divide the Fourier transform of X * Y by the Fourier transform of is. Call the new h sequence.
    4. Calculate the inverse of Fourier of h to get the deconvolved Xsequence.

    I tried to do e same but did not work. I enclose a Vi in first, I bypassed a pulse-to-pulse-triangular square. Then I deconvolutee the convoluted signal using a triangular pulse with deconvolution tool in labview. Then, I tried to do the deconvoltion using the FFT algorith but did not work. Y at - it someone who has an idea on how to perform deconvolution using FFT.

    Regrads

    Charles

    Hi Charles,

    It should work to 8.5.  Let us know if you still hurt to open it.

    -Greg J

  • How to activate and use the built-in webcam

    built in webcam

    How to activate and use the built in webcam on my desktop Dell Inspiron 1?

    MikeViklund,

    Try to read...

    Use and troubleshooting of the Webcam Dell and Dell Webcam Central Software

    Rick

  • Where should I go on my computer to find the pie chart that shows how much space is used/left on my computer?

    Where should I go on my computer to find the pie chart that shows how much space is used/left on my computer... (my question is not related to the questions at the beginning).

    Open my computer, right-click the drive icon, select 'Properties' and you'll see the pie under the general tab.

    Jim

    Microsoft MVP - moderator of the Forum - consumer security live a care - Live Mesh - Microsoft Security Essentials

  • How can I connect using adminastrator account?

    original title: adminastrator account

    How can I connect using adminastrator account?

    By design, the only way to connect to the built-in Windows XP Home administrator account is to restart in Mode without failure.  For WinXP Pro, by pressing CTRL + ALT + DELETE twice at the Welcome screen will produce the standard login dialog box.

  • How to check the use of the ram?

    I have 3 GB of ram on my pc, and I want to know how to check the use of the ram in xp pro? is the use of FP in taskmanager? or (k) of the kernel memory?

    I have 3 GB of ram on my pc, and I want to know how to check the use of the ram in xp pro? is the use of FP in taskmanager? or (k) of the kernel memory?

    Yes, Yes... and no. All applications on your computer uses RAM, not only the pagefile or system (kernel).

    What are you really trying to do?

    See http://www.petri.co.il/pagefile_optimization.htm , especially the part under "How Pagefile your system use?"

  • Microsoft offers a coures online that teaches you how to make and use spreadsheets

    I nees to know how to do and use spreadsheets in microsoft works on vista

    Take a look at: http://www.learnmicrosoftexcel.com/free_tutorials/free_tutorials_with_video.htm?gclid=CPbQvs775LMCFY5lOgodkhgAHQ

Maybe you are looking for