How do the DAQmx sync with multiple devices

Similar Questions

• How can I actually talk to support multiple issues with multiple devices (software, hardware, account of the question?

  How can I actually speak to technical support issues to nulitple with multiple devices (software, hardware, account problems,) I have a touch screen of hp with windows 7 Home, Ipod, home router wireless, boost, WiFi, wii, etc.... Problems with windows live net Passport vs msn Id, problems with zune vs itunes and windows media that nobody wants play nice together.

  My touchscreen notes will use only a google account, music another program, and of course until recently google was not an option on the windows phone. of course if I'm going now that I'll lose all the games and music. His tent so frustrating of any help, that nobody seems to know how often these devices and programs interact (or care) HP has been of little use, even for my provider windows, microsoft, living cells and zune etc...

  All the changes that took place this last month will help but gets boring. I consider myself pretty computer savy, but maybe not, should not this difficult. I realized about a year ago I would have hired a technician but it seems immpossible to find someone who knows enough about all of the equipment and software to really do some good. My Hp touchscreen computer does not even play nice with their own HP printers. I really regret the time and money I spent. I could every Mac.

  All of the suggestions. Even your options do not address several problems of interaction with the hardware and software all needs of problems to adapt to a single category.

  Hello

  
  To correct the software issues run the methods mentioned below.
   
  Method 1: run the troubleshooter and check if the problem is resolved.
  http://Windows.Microsoft.com/en-us/Windows7/open-the-performance-Troubleshooter
  
  Method 2 : run a SFC (System File Checker) scan and see if the problem occurs.
  http://support.Microsoft.com/kb/929833
  
  Method 3 : run Clean boot and check if the problem persists.

  
  To help resolve the error and other messages, you can start Windows XP, Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  
  Note: follow step 7 to reset the computer to start as usual after the boot process.
  http://support.Microsoft.com/kb/929135

  To solve the problems related to Windows Live and MSN to check the links below on contact.

  
  After the question in the links below
  http://support.Microsoft.com/kb/940784
  http://windowslivehelp.com/
   
  To solve the problems related to the HP touch computer
  
  Update the HP touch drivers from the manufacturers Web site.

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  If you need to talk to a Microsoft technician, then you can check the link below http://support.microsoft.com/kb/295539

  
  Hope that helps.

• How to access the PDB (s) with multiple shared users?

  is it possible to access the PDB files with multiple shared users?

  Consider the scenario:

  I have two common user:-c# a PDB and c ##b:-PDBTEST

  I am facing problem:

  When I connect with the common user - c ##b, I am not able to see the table of PDBTEST created by connecting you with c# a.

  However, I have assigned rights in PDBTEST for both users c# a and c ##b.

  For the common c ##b user, is there another way, I can access PDBTEST?

  I'm following measures:

  Connect as sysdba

  1 > created two user c# a and c ##b (container = ALL)

  2 > common role granted with all privileges: c ##role (container = ALL)

  3 > assigned c ##role both user: c# a and c ##b (container = ALL)

  4 > created PDB: PDBTEST

  Changed session and containing value = PDBTEST

  5 > granted c ##role to two users: c# a and c ##b inside the PDBTEST

  6 > connect with c# a (and not as sysdba)

  Changed session and containing value = PDBTEST

  7 > table created and inserted record: TestTable

  8 > connection with c ##b (and not as sysdba)

  Changed session and containing value = PDBTEST

  I'm not able to access the record of "TestTable" after you connect with c ##b...

  Even more, if I connect with c# a, I can access inserted records.

  Help, please.

  Hi Big Boss,

  It has nothing to do with the PDB, it is just the works of oracle way - to query a table that belongs to another yo uhave to precede their schema name unless you do one of 2 things

  (1) create a synonym (public or private) for their purpose

  (2) use alter session set current_schema

  So in your case you'd be (both logged in as ##b c)

  (1) create synonym c# table_name #a.table_name;

  (2) alter session set current_schema = c# a;

  Now, if you say

  Select * from table_name as c ##b it will work.

  (1) is permanent

  (2) must be adjusted each time you connected

  I think you're confusing a pdb with a schema file.

  See you soon,.

  Rich

• Is possible to write the INSERT statement that fills two columns: 'word' and 'sense' of the file text with multiple lines - in each line is followed word that is the meaning?

  Is possible to write the INSERT statement that fills two columns: 'word' and 'sense' of the file text with multiple lines - in each line is followed word that is the meaning?

  Hello

  2796614 wrote:

  Is possible to write the INSERT statement that fills two columns: 'word' and 'sense' of the file text with multiple lines - in each line is followed word that is the meaning?

  Of course, it is possible.  According to what the text file looks like to, you can create an external table that treats the text file as if it were a table.  Otherwise, you can always read the file in PL/SQL, using the utl_file package and INSERT of PL/SQL commands.

  You have problems whatever you wantt?  If so, your zip code and explain what the problem is.

  Whenever you have any questions, please post a small example of data (CREATE TABLE and only relevant columns, INSERT statements) for all of the tables involved and the exact results you want from these data, so that people who want to help you can recreate the problem and test their ideas.  In this case, also post a small sample of the text involved file.

  If you ask about a DML operation, such as INSERT, then INSERT statements, you post should show what looks like the tables before the DML, and the results will be the content of the table changed after the DML.

  Explain, using specific examples, how you get these results from these data.

  Always say what version of Oracle you are using (for example, 11.2.0.2.0).

  See the FAQ forum: Re: 2. How can I ask a question on the forums?

• How to configure a VM with multiple network cards to see Agent?

  How to configure a VM with multiple network cards to see Agent?

  We can archive this requirement by configuring the subnet used view Agent.

  The subnet determines which view address of Network Agent provides the server instance to connect to view for the client protocol connections. The view on VM officer has more than one NIC

  Follow the procedure below:

  on a display Agent installed VM,

  * Recording of VM session.

  * RUN--> type regedit or type regedit.exe at the command prompt

  * Create a registry entry to configure the subnet.

  For example: is HKLM\Software\VMware, Inc. \VMware VDM\Node Manager\subnet = n.n.n.n/m type - REG_SZ.

  In this example, n.n.n.n is the TCP/IP subnet, and m is the number of bits in the subnet mask.

• I want to teach my students the adobe Illustrator. If I buy CC-Illustrator, we work at the same time with every devices with my ID?

  I want to teach my students the adobe Illustrator. If I buy CC-Illustrator, we work at the same time with every devices with my ID?

  No, you have your own identification number

• How to operate the laboratory discovered multi-function synchronization with multiple devices and change the recording time?

  Hi, I'm new in Labview. I need help for:

  1 change a program multi-function in order to record the data of three cards daq (devices 1-3) and output through the map (1 unit). The current program was created to record and output signal of one of the card (1 unit). I try to choose multiple devices when I run the program, but there is an error 200558 shows "a task cannot contain multiple independent devices. Create a task for each independent device.

  2. change the duration record for a longer period, for example: 0.1 s. Currently, the recording time is s 0.009971.

  I joined the multi - funtion.lld. In this library, "des_v2_Multi-Funtion_Synch I - AO.vi" is the program that I need to change. I've also attached a file of input for runing the program signal.

  Thank you very much!

  Sincerely,

  Jie

  Hello Jshen6,

  You can have different examples of VI if you do not use the same version of LabVIEW. I am currently operating on LabVIEW 2013 SP1. Whatever it is, this article should be useful to you that he describes in detail how to synchronize multiple tasks of series M.

• With the help of creative cloud with multiple devices? (single use)

  When registering to creative cloud, how devices that allow personal office use? I am eager to the software for my laptop and iMac (Plans for individuals / customer existing CS / full at £27,34 per month).

  Thank you, Sarah

  Found:

  You can install and activate office of CC on both computers applications, regardless of operating systems, for the person associated with the CC membership...

• Pavilion 22xw: calibrate the 22xw Pavilion with Spyder device?

  I m a photographer just starting my business and I want to calibrate my new monitor (Pavilion 22xw) to get the accuracy of the prints of my work. Is it possible to calibrate the device calibration Spyder? How should I do this?

  Thank you!

  Hello

  If (IF is the key word) the HP 22XW hid the menu of service (not documented by HP) then you might have a chance to improve calibration. I have a Spyder and the technology is very old, as it was developed for cathode ray tubes then changed to 1st generation LCD displays.

  Go to the control panel 10 and select color management.  If you look under the devices tab, you should see the ICC profile for your device. If not then gohere to pick up the driver and utility tools. A diagnostic tool is also available.  The Advanced tab has additional functions that could adapt to your specific needs.

  If you are not satisfied with the above, then the hardware control panel interface driver can give you additional functional adjustments. I know that NVIDIA has some precise adjustments of the colors that can be made.

  Bottom line, if you are in need of professional quality perfection, then review the information on thissite and also here. Notice the equipment that is used. With this type of equipment, professionals are certified to the calibration screen, but the certification process will cost you more than the monitor.  If you need this kind of perfection then I suggest that you consider a professional quality monitor $$$.

  The Essentials DVD of digital video and the Toy Story DVD have some basic color adjustment tools. These tools can be used and the adjustments that can be made via the functions of control panel of hardware driver and/or the specific screen menu functions. Do not try calibration, currently off line as the video driver and hardware can and will bring subtle and sometimes drastic changes to the colors.

• How does the DAQ hardware with data acquisition?

  I'm sampling of 8 channels at 2.5 MHz I I need to know if the DAQmx 6133 I use gets every channel at 2.5 MHz or if she gets every channel (2.5/8) MHz. For example if I had a channel it can get up to 2.5 MHz, but if I get 8 channels, this channel will get samples in high 312, 5 kHz (= 2.5 / 8 MHz).

  Can someone help me out here?

  Thank you

  Rafael

  Hello Rafael,.

  The NI 6133 is a module for simultaneous sampling.  This means that there is an NOC for each channel on the device.   If you look at the Specifications for the 6133 OR you can see that the maximum sampling frequency is specified as 2.5 MS/second. There is one by the channel for this device specification.  Thus, you can enjoy all 8 channels at 2.5 MS per second instead of having to use the overall rate of 2.5/8 MS/second when acquiring on all channels.

• ID BlackBerry blackBerry 10 with multiple devices

  Hello

  Currently my BlackBerry ID is associated with a device of BB 7.1 and my BB PlayBook. I think of acquring a BB10 device. My BlackBerry ID will be dissociated from my BB 7.1 (and I hope not not my BB PlayBook) if I chose to use it with my BB10?

  Thank you

  gajariam

  gajariam wrote:

  Hello

  Currently my BlackBerry ID is associated with a device of BB 7.1 and my BB PlayBook. I think of acquring a BB10 device. My BlackBerry ID will be dissociated from my BB 7.1 (and I hope not not my BB PlayBook) if I chose to use it with my BB10?

  Thank you

  gajariam

  You can stay connected to the device of BB10 an app world, a single device BBOS (5,6,7 or 7.1) and a simultaneous PlayBook and the BBM on a single device.

  Although you are able to use the app on your simultaneous BBOS world, BB10 and PlayBook with the same ID, you won't be able to use BBM on your device 7.1 if you switch to BB10.

• How to retrieve unique records with multiple columns

  I have a sps_prod table as described below-
  
  POGNAME VARCHAR2 (1500)
  INDEX #VERSION VARCHAR2 (200)
  POG_MODEL_STATUS VARCHAR2 (100)
  POG_LAYOUT_TYPE VARCHAR2 (500)
  POG_MARKET_SPECIFIC VARCHAR2 (500)
  POG_CONTACT_NUMBER VARCHAR2 (100)
  AREA_SUPPORTED VARCHAR2 (500)
  POG_COMMENTS VARCHAR2 (1500)
  POG_FOOTER_COMMENTS VARCHAR2 (1500)
  POG_ELECTRICAL_LIST_1 VARCHAR2 (1500)
  POG_ELECTRICAL_LIST_2 VARCHAR2 (1500)
  POG_CARPENTRY_1 VARCHAR2 (1500)
  POG_CARPENTRY_2 VARCHAR2 (1500)
  INSTALLATION_INSTRUCTION_1 VARCHAR2 (1500)
  INSTALLATION_INSTRUCTION_2 VARCHAR2 (1500)
  FIXTURE_REORDER_NUMBER VARCHAR2 (200)
  FIXTURE_ID VARCHAR2 (200)
  FIXTURE_NAME VARCHAR2 (500)
  FIXTURE_IMAGE VARCHAR2 (500)
  PART_REORDER_NUMBER_9 VARCHAR2 (500)
  PART_FIXTURE_ID_9 VARCHAR2 (500)
  PART_FIXTURE_NAME_9 VARCHAR2 (500)
  PART_FIXTURE_IMAGE_9 VARCHAR2 (500)
  UPC VARCHAR2 (50)
  ITEM_NUMBER VARCHAR2 (50)
  DESCRIPTION VARCHAR2 (700)
  MERCH_TYPE VARCHAR2 (20)
  HEIGHT VARCHAR2 (100)
  WIDTH VARCHAR2 (100)
  DEPTH VARCHAR2 (100)
  DATE OF CREATE_TS
  
  There are 4 million records in it and many with the same combination of POGName, #Version, POG_Model_Status, POG_Layout_Type, POG_Market_Specific, POG_Contact_Number and Fixture_Name Index. How do the records to retrieve all the columns above, but with a unique combination of fixture_name and reorder_number. It has no keys defined on the table.
  
  I guess that it is a simple problem but the fact I'm trying to retrieve all the columns I'm stumbling.
  
  Thanks in advance.

  Hello

  Sanders_2503 wrote:
  ... There are 4 million records in it and many with the same combination of POGName, #Version, POG_Model_Status, POG_Layout_Type, POG_Market_Specific, POG_Contact_Number and Fixture_Name Index. How do the records to retrieve all the columns above, but with a unique combination of fixture_name and reorder_number.

  I don't see a column named reorder_number. Do you mean fixture_reorder_number or part_reorder_number_9?

  So, you want only one row for each distinct combination of fixture_name and some other column (I'll assume it's fixture_reorder_number). Does it matter which line? They will not necessarily have the same values for the other columns.
  The following query returns the one with the first pogname (in sort order):

  WITH     got_r_num     AS
  (
       SELECT  pogname, index#version, pog_model_status, pog_layout_type
       ,     pog_market_specific, pog_contact_number, fixture_name
       ,     ROW_NUMBER () OVER ( PARTITION BY  fixture_name
                                 ,                    fixture_reorder_number
                           ORDER BY        pogname
                         )         AS r_num
       FROM    sps_prod
  )
  SELECT  pogname, index#version, pog_model_status, pog_layout_type
  ,     pog_market_specific, pog_contact_number, fixture_name
  FROM     got_r_num
  WHERE     r_num     = 1
  ;
  

  If there be a tie (i.e. two or more lines with the same fixture_name, fixture_number and pogname first) and then the will be chosen arbitrarily.

  Instead of "ORDER BY pogname", you can ORDER all the other columns OR expressions, but you must have an ORDER byclause of analytics. You can do "ORDER BY NULL" If you really want pcik an arbitrary line.

  I hope that answers your question.
  If not, post a small example data (CREATE TABLE and only relevant columns, INSERT statements), and also publish the results you want from these data (or some examples of acceptable results).
  Explain, using specific examples, how you get these results from these data.
  Always tell what version of Oracle you are using.

• Pair blackBerry smartphones my BB8330 with multiple devices at the same time?

  matching my BB8330 with my blue tooth earphone(TM:jawbone) and my microsoft sync which is at the same time in my car? If I combine the car, will I need to pair my jaw all over again?

  TeslasBB wrote:
  matching my BB8330 with my blue tooth earphone(TM:jawbone) and my microsoft sync which is at the same time in my car? If I combine the car, will I need to pair my jaw all over again?

  You can only pair one device at a time to your 8330, or any other phone besides.  The "pairs" are saved in the phone, you can use one or the other and you will not have to pair it again.  Once you turn on your bluetooth device and the phone is turned on, they will find each other again.

  Hope this helps,

• How to use parallelism in the RMAN script with multiple lines

  Gurus,
  
  Need your advice on the use of parallelism in the script "BACKUP AS COPY DATAFILE" have several lines.
  
  I have a script like below:
  
  SET UP THE DEVICE TYPE DISK PARALLELISM 10;
  backup copy datafile ' / data1/oradata/PROD/data01.dbf' size '+ DATA ';
  backup copy datafile ' / data2/oradata/PROD/data02.dbf' size '+ DATA ';
  backup copy datafile ' / data3/oradata/PROD/data03.dbf' size '+ DATA ';
  backup copy datafile ' / data4/oradata/PROD/data04.dbf' size '+ DATA '; and so on...
  
  If I run this script, it runs in the order. How do I in parallel can I copy data files required?
  I selectively copy a few files in ASM.
  I want to use a single script.
  
  Please notify.
  Best regards
  David
  
  Published by: 966454 on October 18, 2012 23:59
  
  Published by: 966454 on October 18, 2012 23:59

  Try to use only a backup statement with the manual channels and parallelism configured as stated in my previous message. For example:

  CONFIGURE DEVICE TYPE DISK PARALLELISM 3;
  CONFIGURE DEFAULT DEVICE TYPE TO DISK;
  CONFIGURE CHANNEL 1 DEVICE TYPE DISK FORMAT '+DATA1/%U';
  CONFIGURE CHANNEL 2 DEVICE TYPE DISK FORMAT '+DATA2/%U';
  CONFIGURE CHANNEL 3 DEVICE TYPE DISK FORMAT '+DATA3/%U';
  BACKUP AS COPY DATAFILE 4,5,6;
  

• Windows media player will not sync with my device rises the error in the status of the synchronization

  I ripped a cd to my windows media player - I then entered in the sync tab and dragged the album I had just torn off sync - it comes then a full synchronization, please click here for details when I click this, it displays error - I clicked on the Red 'x' and read the following it is not possible to get the certificate to the device. Contact the device manufacturer for a firmware update or other measures to address this problem. My camera is a Sony Walkman - I have previously synced

  Hello

  Thanks for posting the question to Microsoft Community.

  Let us try the following and see if that helps:

  Method 1: To resolve the problem, try to disconnect and reset.

  See your device manual for specific instructions on performing this procedure.

  Method 2: Check on the Sony Web site for any solution on this, also try to update the drivers for the Sony Walkman device firmware.

  For more information: Understanding sync errors and warnings:

  http://Windows.Microsoft.com/en-us/Windows-Vista/understanding-sync-errors-and-warnings

  Note: The article above also applies to Windows 7.

  Windows Media Player sync: frequently asked questions:

  http://Windows.Microsoft.com/is-is/Windows7/Windows-Media-Player-sync-frequently-asked-questions

  Hope this information helps. Response to help you further.