How do the PPPOE connection automatic connection on Vista

Hello!

I have the internet connection for PPPOE. It works fine, but I want to autoconnect when I start my PC.
I tried to create a network connections shortcut and copy it to all the programs/startup.
It did not work.

Thank you!

OK, try this. Open the Control Panel and select Internet Options > connections . Make sure your PPPoE connection is highlighted and always set the default connection is checked. This assumes that your PPPoE connection is your default value.

See also the answer to a similar question for quite awhile in time...

http://Forum.Soft32.com/Windows/auto-connection-Windows-Vista-log-ftopict376533.html

Good luck... MS - MVP Windows Desktop Experience, "when everything has failed, read the operating instructions.

Tags: Windows

Similar Questions

  • How do the window popup automatically when I load my site.

    Please help me I m a start of training...

    This forum deals with JS in PDF files, not web sites.

  • How long the license key latest for Windows Vista

    The other day a person allegedly from Microsoft phoned to tell me that my activation license has expired and that my computer has been damaged by a virus that kept sending error messages. As my license has expired, they were not able to fix the problem and I had to pay £70.00 to renew and to help more of them, otherwise my PC was getting more slower and slower all day. I hung up. But it got me thinking, it was a spam?

    All the Licenses for Windows retail (including upgrades) are transferable to the new machines (in the case of an upgrade it will still a qualifications base on the new machine license) and are actually eternal - at least until there is no material more around which it will run.

    OEM licenses are locked to the first machine on which they are turned on - but finally done as the motherboard (and the replacements of vices).

  • Vista, a pppoe connection is created by using the 'Get Connected wizard' or rasphone.exe, she appears as a "Dial-up connection" in the network connections folder.

    Vista, a pppoe connection is created by using the 'Get Connected wizard' or rasphone.exe, she appears as a "Dial-up connection" in the network connections folder. When you right click on the connection of customer created, click Properties, it says "connect using the Modem.

    Is it a registry problem or what? How can I fix?

    original title: PPPOE connection problem

    Hello

    1. you connect using a cable or DSL modem?

    2. did you ever get this working before that?

    3. are you connected to a domain?

    4 are you running Vista in a virtual environment?

    You doing appeared in this link to create the PPPOE connection:

    http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-PPPoE-connection-to-the-Internet

    Thank you

  • How to fix error code 643 in windows vista

    How fix the error code 643 for windows vista when you try to install the updates.

    See if this sugesstion can help you:

    http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/4a6ea38b-9104-4547-8802-bc94bb6127a9 >

  • How automatically dial the internet connection in the browser firefox to start the browser in internet Explorer

    I have ADSL modem broadband where I have to connect to the internet by connecting using the sequence of steps

    Control Panel > network connection > create a new connection > Internet > set up my connection manually > Connect using dial-up modem OR connect using a connection braodband including user name and password required
    create this connection, I must provide the user name and password provided by the ISP.

    I have to dial internet connection manually after the modem set automatically connect to the local network
    I found a solution for internet explore and changing the setting internet explore start automatically component internet connection that I start the internet explore.
    is their in mozilla firefox an option to automatically call the internet connection that I open the firefox browser?

    and there is no solution that I began my internet computer connections established automatically without having to open any browser, if this solution is not available, please tell about it.

    The setting that you set in IE also affects Firefox. For example, if you set the following, and then when Firefox makes a connection request to Windows, Windows is supposed to establish the connection:

    Windows Control Panel > Internet Options > connections or

    Internet Explorer Tools menu > Internet Options > connections

    "Dial whenever a network connection is not present"

    Source: How to make Firefox automatically dial up

  • How to get NB100-11R automatically connect to the WLan on logon

    I just bought a netbook NB100-11R.
    First time that I started it, I went into the network administration panel to set up a wifi access.
    She had detected my wireless network, so I entered the WPA password and it connected correctly. I saved these parameters such as a network location.

    Next time I started than I expected it would he remember these parameters and automatically connect, but I could not get web access.
    Looking at the network admin, this sill has my network listed as the wireless connection, but I had to unlock the Control Panel, select my site again and click on the button 'apply the location as the current configuration', before he would give me a web access, I have to do it every time I start, which will become irritating.

    Is it possible to get to connect automatically when I start?

    What operating system do you use?

    Have you updated the Firmware wireless access point?

  • How to bypass the automatic connection in Vista. The SHIFT key after that logging does not work.

    I'll put up a laboratory of small kiosk for my students with a minimum account privs.  Sometimes I need to login with the administrator account to perform regular maintenance or solve a problem.  in xp, all I had to do was hold down the SHIFT key before the blue startup screen and all accounts (including my admin account) were visible.  This doesn't seem to work with vista.  is there a secret combo of keyboard shortcuts?  What should I do to ensure that both accounts visible?

    Hi Scentfromabove,

    Follow this step in order to bypass the automatic connection in vista.

    1. Click Start and type netplwiz in the start search box and press ENTER.
    2. check the users must enter a user name and password to use this computer
    3. click on apply and OK.

    I hope this helps.

    Bindu S - Microsoft Support
    [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

  • How to create the network connection page

    Hello

    Can someone help me how can I create a connection as someone window when the WiFi connection? (someone connect wifi and automatically open the wifi login page)

    Sorry, but this will require an enterprise grade router and dedicated software. Run a Google search under the term of

    captive portal

    For more information on this topic.

  • Unable to connect to the PPPoE server with 2 BEFSR41ver

    I had to get a new AT & T DSL line to a new home with new ID and password. I've never had a problem with the router to the old address and the line DSL.  I've reconfigured the router with a new user name and password for PPPoE I got from AT & T for use with their new motoroal they sent me. The modem gives me the internet when I connect the modem directly to the computer.  When I connect the modem to the WAN port of the router with the computer connected to one of the LAN ports on the router, I get "Unable to connect to PPPoE" when I try to access the internet. When I connect the modem to one of the LAN ports with another port LAN from the router to the computer, I don't have the internet, but this is not recommended for the router cable management. With the modem connected to the WAN router and a power cycle performed port, I still get the same error message. I disabled my firewall and still have the same error message. I don't think I have another firewall to operate.  I never had this problem to my old address and line DSL AT & T with different ID and password and the same router.  Anyone know what is happening?  STEIN

    Your problem is that your "modem" is actually a "modem-router" and it uses the same subnet as the BEFSR41 192.168.1.x.  To resolve this issue, follow these steps:

    All first, reset your BEFSR41 factory default, then set the "local IP address" 192.168.2.1

    To do this, follow these steps:

    To reset your router by default, follow these steps:

    (1) turn off all computers, the router and the modem and disconnect from the wall.
    (2) disconnect all the wires of the router.
    (3) turn on the router and let it start up completely (1-2 minutes).
    (4) press in and hold the reset for 30 seconds button, then release it, then let the router reset and restart (2-3 minutes).
    (5) turn the router.
    (6) connect a computer cable to port 1 of the router (NOT to the internet port).
    (7) turn on the router and let it start up completely (1-2 minutes).
    (8) the power of the computer (if the computer has a wireless card, make sure it's off).
    (9) try ping on the router. To do this, click the 'Start' button > all programs > Accessories > command prompt. A black DOS window will appear. Enter the following text: "ping 192.168.1.1" (without the quotes) and press the Enter key. You will see 3 or 4 lines that begin with ' response to... ". "or"Request timed out". If you see "reply from...". ", your computer has found your router.
    (10) open your browser and point it to 192.168.1.1. This will take you to the login page of your router. Leave the user name blank and in the password field, enter "admin" (without the quotes). This will take you to your router configuration page. Note the version number of your firmware (usually found near upper right corner of the screen).  Then, change the "local IP address" 192.168.2.1, then click the 'Save Settings' button and wait (3 to 60 seconds) of the screen refresh.  You will be probably disconnected from the BEFSR41.  Don't worry about this.  Turn off the BEFSR41 and your computer.

    (11) then, using an ethernet cable, wire the ethernet port of the modem to the Internet port on the BEFSR41.  Turn on your modem and enable good start.  Turn on your BEFSR41 and enable good start.  Turn on your computer.  Test your system, it should work.

    If you can not ' response to... ". "in step 9 above, your router is probably dead.  Report with this info.

    If you get a response in step 9, but cannot complete step 10, is that your router is dead or the firmware is damaged. In this case, a report with this problem.

    If you need additional assistance, please state the version of firmware on your router and the results of steps 9 and 10. In addition, if you receive error messages, copy them exactly, and report.

    Please let me know how things turn out for you.

  • How to set up a PPPoE connection?

    I want to know if anyone knows how to set up a PPPoE with Windows Vista Home Premium.  I have Comcast as a provider of services and I am already able to go online with the wireless router, but I put it in place as a dynamic connection instead of a PPPoE connection.  When I go to the web page of the router to try to set up as a PPPoE connection, it cannot connect to the internet.

    I want to know if anyone knows how to set up a PPPoE with Windows Vista Home Premium.  I have Comcast as a provider of services and I am already able to go online with the wireless router, but I put it in place as a dynamic connection instead of a PPPoE connection.  When I go to the web page of the router to try to set up as a PPPoE connection, it cannot connect to the internet.

    Found this link for you. I don't know if it applies to you or not. So don't blame me.

    http://www.FSR.com/pages/support.asp?Itemid=211

    t-4-2

  • How to start the VPN connection when windows is running

    Original title: trouble with automatically the VPN connection

    Hi, I want to have my VPN connection to start automatically when windows is running.

    Simple version:
    I tried various different methods, including; Paste the shortcut in the startup folder and adding the task in the Task Scheduler.

    I have the same problems with both methods. Just the VPN starts automatically... I have to run it manually whenever I turn on the computer or wake up sleep mode.
    Does anyone know other methods finally a solution for the other two methods?
    In the version of the depth of the problems:

    Method of Task Scheduler: I get argument is not valid, it is even after I have successfully created the task and click OK. The task will not work, and also by some strange reason, my VPN password is not get recorded on my connection more. So now, I need to manually start the connection and type in the password. (I click on save the password whenever this does not work, when the task is active...)

    Shortcut to the startup directory: Simple and easy... It simply doesn't get it. I followed the steps very carefully and I'm 100% sure that I did it the right way...

    These links have good information on how to open a VPN connection to the Windows dΘmarrage

    http://www.dariancabot.com/2010/11/15/automatically-connect-to-VPN-at-Windows-startup/

    http://www.Buchatech.com/2011/04/configure-Windows-to-automatically-connect-to-VPN/

  • How to erase history without deleting the active connections?

    I never used to have this problem and I have updated Firefox repeatedly but continue to have the problem. Whenever I have clear history (everything EXCEPT the active connections), get it out of my active connections. I clear the cache and cookies quite often because of my older laptop computer and constant streaming on Netflix, Hulu and TWC. Is there a way I can fix this problem?

    A detail as a website to remember you (automatically log you) is stored in a cookie.

    You can use these steps to make a Web site recognize and remember you:

    • Create a cookie 'allow' except to keep these cookies, in particular in the case of secure websites and when the cookies expire when Firefox is closed.
    • Tools > Options > privacy > "Use the custom settings for history" > Cookies: Exceptions

    Make sure that you are not Firefox running in permanent private browsing mode (do not remember the story; Always use the private browsing mode).

    If the deletion of cookies did not help, then it is possible that the cookies.sqlite file that stores the cookies has been corrupted.

    • Rename (or delete) cookies.sqlite (cookies.sqlite.old) and if present remove cookies.sqlite - shm and cookies.sqlite - wal in the Firefox profile folder in the cookies.sqlite case has been corrupted.

    You can use this button to go to the current Firefox profile folder:

  • I keep getting the "this connection is not approved" in all the sites when I use Firefox on windows laptop 36.0.1 8. How can I overcome this.

    I keep getting the "this connection is not approved" in all the sites when I use Firefox on windows laptop 36.0.1 8. How can I overcome this.

    Hi vijaysampath, please make sure first that the date, time, and time zone are set correctly on your system. If this does not solve the problem (or it is already set correctly), a possible solution depends on different factors:

    • What is the error code indicated under Technical Details on the error page?

    in case the error code is equal to sec_error_unknown_issuer, please try to add an exception on the bottom of the error page to verify the certificate, as shown on the attached screenshot:

    • What information about the issuer of the certificate contain?

    Please take these two pieces of information. Thank you!

  • How to go on connect automatic book mac pro on commissioning?

    I just want to pass on my Macbook Pro 2010 without having to keep signing in.  I use it only for watching movies & t.v. on mainly, & as it is one of big 17 inch MBP I don't take it out of the House these days. In system preferences, the option to automatically connect is grayed out even when you unlock the padlock, and I've been to both the users & groups pref and the security & privacy prefs. So I can't turn off.  Oddly enough, I don't have this problem with my Macbook to date!  Can anyone help?  Thank you!

    p.s. I'm running on Mac OS X El Capitan X.11.5.

    Jane Elizabeth Smith wrote:

    I was at the time the users & groups pref and security & privacy preferences. So I can't turn off.

    FileVault is turned on?

Maybe you are looking for