HOW DO U INSTALL A WIRELESS PRINTER

How to install a wireless printer

I guess that you haven't tried Googling it yet? :)

Hope this helps:

http://www.PCWorld.com/article/212204/how_to_install_a_wireless_printer.html

http://www.WikiHow.com/set-up-a-wireless-printer-connection

If necessary, go to the Web site of the manufacturer of the printer to download a manual for your printer or see the Quick Setup Guide as appropriate.

Tags: Windows

Similar Questions

  • Error 0 x 00000643 error when you try to install a Kodak wireless printer. When tried to install the wireless printer is located and ready to install, I get a PnPx device then error

    Error 0 x 00000643 error when you try to install a Kodak wireless printer. When tried to install the wireless printer, wireless printer is ready to install I get a PnPx device Microsoft authorization. Runs like it is installing then error is presented. I tried fixit did not work... Frustrated

    You could settle on a previous installation. Try this:

    Go to your device manager and see if you have an old installation of the printer and right click Uninstall. You can also check if there is an old facility of the printer in Control Panel, printers, right click and delete it. Install the printer using the Add Printer Wizard. If it fails again with the same error, go to Device Manager right click on the name of your computer, click on "Scan for harware changes". He must find the printer and install it. Now you can check your printer if its work. If this does not work, please indicate your model of printer on your next reply.

    Open the Device Manager
    http://Windows.Microsoft.com/en-us/Windows-Vista/open-Device-Manager

  • Message of invalid argument while trying to install a wireless printer

    I am trying to install a wireless printer from Brother on my laptop which is running Vista. I also have a desktop that runs XP. I have not had any problems for the printer set up and running on XP. However, on Vista, during the installation of the Brother software, I get a message of "arguments are not valid. It seems that the installation is successful, but it's not. The Brother printer appears in the network, but not in printers in Control Panel. I tried a solution listed here, but in the Control Panel, when I try to add a printer, I get a message that Windows can not open "add a printer". Can you help me please?

    Hi cat8woman,

    Please see the thread with a similar problem and fix possible:

    http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/error-message-printer-the-arguments-are-invalid/ef284d93-BD50-49c7-9a98-8ef592e0cf3a

    I hope this helps!

  • How can I install the same printer twice?

    How can I install the same printer twice, with different printer for each preferences? I got my printer configured this way with my old Win XP system, but can't find a way to do it with Windows 7.

    I do it all the time.  The devices folder and printer stacks multiple instances on the same device on top of the first unit (since it's the same device).  If you have Pro or Ultimate, you can use the UI created by the spooler, printmanagement.msc team, to manage your local printers.  The former team of spooler printers folder is also around, but it's really hidden.

    This command will launch the printers (no authorized device) folder

    Shell:::{26EE0668-A00A-44D7-9371-BEB064C98683}\0\::{2227A280-3AEA-1069-A2DE-08002B30309D}

    Alan Morris Windows printing team; Here Microsoft Knowledge Base search: http://support.microsoft.com/search/Default.aspx?adv=1

  • I forgot my WPA wireless security password and I need to install a wireless printer

    IM installing my wireless printer and it asks me my password wireless WPA security, but I don't remember what it is. Help

    It may be on a printed label attached to the modem/router. Take a first...

    If it is not obvious and you take note of the passphrase in the installation manual, you can reset the modem/router.

    Contact your ISP for advice on the procedure...

  • crashes when you try to install a wireless printer

    Greetings from rescuers;

    My desktop HP P6210F computer refuses to recognize the exiostence of my HP Officejet wireless printer.  The printer works from other laptops in the House.  The PC crashes when I go to 'check' the envirnoment network page and requires that the Task Manager to release.  He also cannot afford to install via a USB connection.  Any advice you could offer would be appreciated.

    The f

    Hello again @jlehman56,

    Thanks for the information on your question, your patience is appreciated. I'm you provide a document from HP support: HP printers - The Network Installation hangs on the screen 'check' environment network, which will address the issue you're seen and get resolved in my opinion. I was hoping that printing and scanning doctor would do that for you. The document that I linked you addresses different operating systems so simply scroll down until you find your and follow the instructions on the breast.

    Please re-post if you need extra support. Thanks again for the display on the HP Forums. Have a wonderful day!

  • Cannot set up and install a wireless printer. HP Photosmart the 427 UDP Port

    I know this question has been posted several times, and before I go, I want to report that I was researching spending last week and try every possible solution I've read. So I hope that someone can offer some new or still has outstanding question.

    Equipment: HP laptop, Windows 7, HP Photosmart Plus B209 all-in-one, Netgear WNDR3700 (Dual Band), Norton 360 Antivirus/Firewall

    My laptop and printer are both about two years. I have the wireless printer set up in my previous home on a different network (more old netgear router). No issues what so ever.

    So I recently moved into a new home, bought a new router and set up a wireless network. Everything works fine without thread; two laptops, xbox, ps3, tv, cell phones, etc.). I finally had time to set up the printer. USB works fine. But it can not configure for wireless use. I get the infamous (together with HP printers) error message that my computer cannot communicate with the printer and I need to open port 427 UDP. Tried twice more, but no dice.

    Uninstalled all HP software and the printer driver and re-downloaded/installed the latest things from HP website. Tried to install the printer and Wireless Setup again, but still no dice. USB works fine.

    And there began my long trip. Here is the list of things that I did without success, and I'm sure I did right. Turn off my firewall (norton and windows). Opens UDP Port 427 (norton and windows). 427 on my router (port forwarding) open UDP port. Maunally added the printer through windows as a wireless device. Manually add a network printer.

    I still get the same error of UDP port 427. Please PLEASE help me. tI really want to fix this and refuse to believe that something as simple as it is not repairable. Printers are cheap and I don't mind buying a new one (not HP), but I have enough stubborn to give my with trivial issues such as this.

    Hello

    Thanks for the reply.

    I suggest you contact HP support for help.

    http://WWW8.HP.com/us/en/contact-HP/contact.html

    Hope this information helps.

  • HOW TO INSTALL A WIRELESS PRINTER MODEL HP OFFICEJET 6700 PREMIUM ON PACKARD BELL LAPTOP

    I have NEED to INSTALL MY HP OFFICEJET PRINTER 6700 PREMIUM without THREAD AS I ONLY HAVE A HEWLETT PACKARD computer LAPTOP so CAN NOT PUT IN THE DISK PROVIDED.

    I assume you mean that you have a Packard Bell netbook which doesn't have a CD player.

    You can download the necessary software on the Internet and install it without the CD.  The location of base for your printer is here--> http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?cc=us&dlc=en&lc=en&os=228&product=5058338&sw_lang=&

    Most netbooks come with Windows 7 Starter, so for a better response, please indicate the model of your computer and the version of Windows you have installed (right click on desktop and select properties for this information).

    You have a wireless router? If so, what is its brand & model?
    The printer came with a USB cable (even if in the end, you want to print wireless)?

  • How can I get my wireless printer to my wifi network?

    As the HP Installation Wizard does not work with the Mavericks, is there another way to get my printer wireless connected to my wifi network? This printer (HP Officejet Pro 8000 A809) works well with the Mavericks on my old wifi network. But my DSL provider has recently installed a new router, so I have a new wifi network which works fine with everything else.

    I was able to get my two Airport Express to join my new network, using Airport utility, but I'm stumped as to how to get my printer to join the new network without the help of the HP installation wizard.

    Following the advice of Shlomi, I managed to reset my printer so that it now appears in my list of networks wifi under devices, such as hpsetup. But I got. Any help would be more approeciated.

    Bruce777 solved this problem for me, thanks Bruce! My printer now works perfectly on my new wifi network!

    Bruce instructions, for anyone else having the same issue:

    -delete all printers already implemented

    -Rub old hp software and updated software for the hp 2.8 drivers

    -Unplug the usb cable from the printer if you have connected

    -restore the network printer hpsetup (hold down the power button / stop and press the button x 2 network and then cancel 3 x, release power button).

    -Print the wireless network test report (hold down the button to network and update support 2 x). Check the ssid network name is hsetup

    -arrived in sys prefs > network and change the mac to hpsetup wireless network

    -go to the sys pref > print scanning

    -Add the HP 8000 printer

    -Click the supplies button and options and click on the printer to show Web page

    -Click on the Networking tab > wireless in the left pane > start networking wizard and change the network of hpsetup to your network

    -finishing (this page may freeze.  Close the browser)

    -Return to the sys prefs and change the network wireless to your networt

    -go to the printer and print the wireless network test report (updated 2 x key and press the network button).  Make sure that the SSID is your network

    -go to system prefs > print scan > select your printer > options & supplies > see the printer Web page > network info (check ssid and compare it to the wireless network test report)

    -try to print something on your printer.  It might take a bit of time first impression.

  • How to connect a USB-wireless printer to a wireless network without PC

    Some HP printers do not have a Wizard of wireless configuration integrated into the façade to connect to a network.  These models install to a computer via a USB connection and the software then sends information wireless via the USB cable to the printer.  However, you do not always have a present computer and still need to connect these printers to a wireless network.  You can use a wireless, like an iPad device, to do this.  For the example below, I used an iPad and a printer Deskjet 3510.

    The first step is to make sure that your printer is aired at an (Ad Hoc) network.  To do this, turn on the printer and press the wireless or wireless Tower, and then in the Setup menu. Connect the iPad (or other wireless device) to the signal being broadcast by the printer wireless.

    Once the iPad is connected to the printer as long as a network connection, open the Web browser on the iPad.  Type 192.168.223.1 in the address bar and go to this site.  Printer status page should load and look like the picture below.

    Click the network at the top of the status page.  You can get a quick warning while being redirected to an HTTPS site.  Click Ok in the message box to continue.  When you click OK, you can get a warning about the identity of the server or the certificate.  Select the option that allows you to continue.  The wording can vary from a browser, but there should be an option to continue anyway.

    Network status page should now be loaded at this point.  Select Assistant wireless to start the installation of the wireless network and click Next.

    When then is selected, it must list the available wireless networks.  Select your network from the list and click Next.  When the network is selected, it should be noted.

    Enter the network password if necessary and click Next.

    A message should be received indicating the name and if security is enabled.  The message below which must indicate that the settings have been saved successfully.  If it indicates that the settings were saved successfully with an error, the configuration of the network is more than likely operation.  Click Ok at the bottom.

    After selecting OK, select status to check that the printer is connected successfully.  It may take a few minutes for light wireless to the printer to stop flashing.  Once it is a solid blue, the printer must be on the network and operation.

    Once this is over, then you will be able to reconnect to your wireless (wireless router) normal signal for internet access.  Now, the iPad and the printer are on the same home network.

    I hope this helps.

  • What is a WEP key and where can I find it. I am trying to install a wireless printer.

    I am trying to install a PRINTER WITHOUT WIRE of Canon MX340. I'm not a user manual. The printer asks for the WEP key.  I don't know what WEP nor where to find key information.  Help, please?  Thank you

    Hello

    Here's what it is

    http://en.Wikipedia.org/wiki/Wired_Equivalent_Privacy

    Response: A WEP key is a security code used on some Wi - Fi networks. The WEP keys allows a group of devices on a local network (for example, a home network) to exchange messages encoded with others while hiding the content of the messages to facilitate visualization by foreigners.

    A WEP key is a sequence of hexadecimal digits. These figures include the numbers 0 to 9 and the letters A through F. Some examples of WEP keys are:

    • 1A648C9FE2
    • 99D767BAC38EA23B0C0176D15

    The WEP keys are chosen by a network administrator. The WEP keys are defined on routers, adapters , and other Wi - Fi wireless network devices. Correspondence of the WEP keys must be set on each device for them to communicate with each other.

  • I need to do a restore on my laptop but I upgraded from premium to ultimate on the line, the restoration will cost the factory how to re - install my upgrade printed only email to purchase

    I have a Sony Vaio VGN series laptop PC that is corrupted and requires a complete restoration of the factory. Recovery discs when it's upgrade in place, but I'm not sure that it will be part of the recovery. I have the original e-mail printed purchase for online upgrade, including the key I will be able to use it again on the same laptop, it was installed on?

    The first thing you need to do is to get your Windows 7 Ultimate Anytime Upgrade key:
     
    An e-mail containing your product key will be sent to the e-mail address associated with your Windows Live ID account or e-mail address you provided if you ignored the account configuration. Note: If you use an email tool or spam blocker spam filter, be sure that you can receive e-mail messages from microsoft.com.
     
    What happens if I lose my product key?
     
    If you lose your product key, you can return to

    www.Windows7.com/GetKey and sign in using the "Sign In" link in the upper right of the page. This will allow to recover your product key if you have established your account with your Windows Live ID. If you do not configure a Windows Live ID account initially there is no record of your online product key. Check your e-mail since it is the only trace of your product key.
     
     
     
    or

    Here are four utilities, which can display your product keys if they are still there:
    Belarc Advisor: http://www.belarc.com/free_download.html
    (He did a good job of providing a wealth of information.)
     
    Also: http://www.magicaljellybean.com/keyfinder.shtml
    and: http://www.nirsoft.net/utils/product_cd_key_viewer.html
    and RockXP: http://www.majorgeeks.com/download4138.html which has additional features.
     
    --------------------
     
    The next thing you need to do is to ensure that your data is backed up:
     
    http://notebooks.com/2010/12/27/how-to-backup-to-an-external-hard-drive/
     http://notebooks.com/2011/02/25/how-to-restore-a-backup-from-an-external-hard-drive-in-Windows-7/
     
    -------------------
     
    The next thing you need to do is to reinstall the base license that you upgraded, Windows 7 Home Premium or Ultimate.
     
    If your computer is pre-installed with Windows 7:
     
    New computers coming often pre-installed with Windows 7 have what is called a recovery partition. This is used to reinstall an operating system in the case of a system failure. To access it, you need to start when you start your computer by pressing a function key. This can be either F1, F2, F9, F10, F11, F12 key DEL or tab. See the manual that came with your PC for instructions on how to reinstall Windows.
     
     
     
    -Samsung uses ESC on most of its systems
     
    -HP use F9 on most of its systems
     
    -Fujitsu uses F12 on most of its systems
     
    -Acer use F12 on most of its systems, but often you need to go into BIOS to allow

    -Dell uses F12
     
     
     
    In general, look at the screen during the POST for a tip for what is possible.
     
     
     
    If your recovery partition is not available or damaged, you must contact the manufacturer of your computer, and request that a defined recovery disk you can use to reinstall Windows 7. They could practice a small shipping and handling.
     
     
     
    ------------------------
     
    If it was a store bought retail license:
     
    http://Windows.Microsoft.com/en-us/Windows7/installing-and-reinstalling-Windows-7
     
     
     
    --------------------
     
    After you have reinstalled your original license, make sure that it is enabled before doing the upgrade to Windows 7 Professional:
     
    How to activate Windows 7 manually (activate by phone)
     
    1) click Start and in the search for box type: slui.exe 4
     
    (2) press the ENTER"" key.
     
    (3) select your "country" in the list.
     
    (4) choose the option "activate phone".
     
    (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
     
    (6) explain your problem clearly to the support person.
     
     http://support.Microsoft.com/kb/950929/en-us

    ----------------------
     
    Redo the Express Upgrade:
     
    Click Start, type Anytime Upgrade, click Enter a key, enter the Windows 7 Ultimatekey request, click Next, wait while checking the key, accept the license agreement, click on upgrade, wait while the software upgrades, (it may take 10 minutes or more depending on the if updates are required) your computer restarts automatically, after the reboot, Windows 7 will notify you updating the computer, the computer will restart once more automatically and will be completed the upgrade, a window will appear notifying the upgrade was successful and your computer is ready to use, click Close, you should be upgraded to Windows 7 Ultimate files the stored settings and programs.
     
     
     
    ---------------
     
    Go to reactivate the license again.

  • How to make deskjet f2210 wireless printing

    OK, so as the topic says I want to do a deskjet f2210 print wirelessly from my laptop. If it is not possible to cool. just need to know if it is possible and how to do it.

    Well, you can't really.  It is a single USB connection.  You COULD connect it to a wireless router special with a USB port for printers.  If you do this, it will print wireless but does not scan.

    It may be easier to get just a new printer.

  • How can I install a pdf printer?

    Here me again. Expecting a solution on your part, I'm still trying everything that comes in mind. As I can not save to the pdf format of the "save under", as in Word 2008, I tried to click on the pdf icon in the toolbar, I have two icons, but both give me the same message:

    Acrobat PDFMaker

    PDFMaker was unable to find the Adobe PDF printer. Please install the printer on this machine.

    I feel stupid because I can't know how. I have a Canon Pixma MX850 installed by default. I don't see any pdf options in the preferences...

    How can I do?

    sommamcs wrote:

    This is a new installation in pdf format, but my printer has been installed since last year and works a lot.  But now graffiti tells me that if I don't have Acrobat I don't have this option, so...

    Thanks anyway!

    MCS

    The latest version of Word has its own PDF generator, but if you have problems with this, you will need to take with Microsoft and Yes, the Adobe PDF printer installed with Acrobat and Reader not.

  • How can I install my HP8150 printer on my windows 8 lap top

    I can't install my HP Photosmart on my new laptop Wwindows 8 and it worked fine on my Windows XP laptop.

    What can I do to get it installed on windows 8?

    Hello

    HP has at least 2 models that have the same number: Photosmart 8150 and LaserJet 8150. What is yours? The two do not have drivers appropriate for Windows 8 or very limited:

       http://h20000.www2.HP.com/bizsupport/TechSupport/DriverDownload.jsp?pnameOID=21695&locale=en_US&TaskID=135&prodSeriesId=27718&prodTypeId=18972

    http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4132&LC=en&cc=us&DLC=en&sw_lang=&product=397810#n194

    Kind regards.

Maybe you are looking for

  • When a backup on iCloud device, it causes problems on another device

    Not sure if they are related, but since I upgraded my iCloud storage my devices does not correctly synchronize when I use iCloud saving. Synchronize live care personal contact and one contact on my other device another entry. All this experience? I t

  • How can I get my destination for rippinng return folder in media player in Windows 7

    my destination folder ripping somehow got out and im wiped unable to extract all the music CD collection

  • KB2686509 security update is not installed

    The update above will not install on my computer.  As I am not very good in computers, I took my problem to a friend of mine who is a genius with computers.  He could not install either, he managed to establish that the problem lies with the software

  • HP7510e all in a habit of scanning

    I have been using my HP 7510e with my Windows 7 PC for printing photos and a few sheets of 8.5 x 11 since November. Today, I decided to reorganize my work space and thought that I would use the scanner HP and get rid of my independent Epson. In my me

  • Cannot delete the sync partnership

    This is the second time that this has happened after I re-installed Windows 7 to solve it the first time. When I have copied a standard file from W7 as my Pictures\Slideshows or moved to the location of Username\Downloads on a network share, it creat