How do we use a custom in AvailableRefinements view?

Similar Questions

• How can I use a custom tool easy to machine the same LabVIEW is the basis on average DC - RMS VI

  I use a cRio 9024 and read PWM with an analog input card 9205.  It was suggested that I use the basis on average DC - RMS VI to convert the voltage of the PWM signal into an analog signal (effective value) for use in my system.  The problem is that the 9024 can use LabVIEW models (it's VxWorks). I work through the device a custom tool easy and I wonder if someone can guide me in the right direction.

  I am running Veristand 2014, cRio-9024, 6modules, and run the scan engine.  It seems that's the reason why I can't read analog voltage (starting a PWM signal) since the signal is running at 200 Hz and the Scan Engine runs at 500 Hz.   I tried to avoid making a custom device or an FPGA and found a work around using the 9401 in counter mode.  I can get the numbers that I need, that's how I'm heading at the moment.  I would like to custom device approach, but not this sprint.

• I installed a trial of Illustrator from Adobe on my macbook pro. I want to draw a picture using the custom trace button but can not. Does anyone have any ideas how I could track custom?

  I installed a trial of Illustrator from Adobe on my macbook pro. This is the release of 2014 of the adobe Illustrator. I want to draw a picture using the custom trace button.

  I start a new document. Then I place my scanned pencil/color pencil, drawing, in the document. I tried to scan and then placing it as jpeg, bitmap and a tiff file. I tried scanning and place then, in color and in black and white. The scan mode that I use is flat. Adobe Illustrator allows me to select the default button and one of the eleven preset buttons (e.g. photo high fidelity), but cannot me click on the record button custom. The custom trace button is gray while all other buttons are white.

  Does anyone have any ideas how I could track custom?

  Just it trace, and then change the options later. The follow-up is 'live', you can press the buttons and see what happens.

  See also the manual.

• How can I clear the browser history when you use the custom settings for history?

  When my history option is set to "Use the custom settings for history", the options page has no link to "clear recent history". There was formerly a menu option, but that seems to be gone now with Firefox 29. Is my only option to access the dialog box, clear the history all to change the historical option to history to remember and then change it back? Is there another way to access the option erase history all?

  I think you can get the menu bar by pressing the ALT key. If you want to return permanently, click View > toolbars and check menu bar.

• Use of custom in Veristand files

  Hi all

  Have not been able to find a lot of documentation related to the use of "Personal files" in Veristand.  I would like to know some examples of the types of files users have set up.  Specifically, I would like to know if you can "call" some types of models or devices personalized (i.e. for databases or configuration settings).

  Thank you very much

  GSinMN

  Hi GSinMN,

  It has custom there some documentation in the help of VeriStand, which deals specifically with files.

  Adding custom files

  http://zone.NI.com/reference/en-XX/help/372846D-01/VeriStand/add_custom_files/

  Although aid is not quite fully reveal the capabilities of this feature. There are two distinct use cases that I could identify for the custom in VeriStand files option. I'm going to the list of people the more detail and show you an example.

  Make easily accessible to the driver files in the development environment.

  When a file is added in the custom files in the project section, it will have its own icon in the project and is included in the project dependencies. Having the file to display in the project is useful if there is a picture of troubleshooting or a specific document (calibration sheet, how to run a test, etc.) that you would like as your operator to have access to. For example, in the sample project, I realized, there is an added file called "TestA1_PreTestSetup.txt". Of the project (on the toolbar), the operator has the option "Open a file" (to view) or "export...". "to investigate his path on the computer of the operator.

  

  Please note that the file is now added to the dependencies of the project.

  If you start to investigate the project file and lets say you do a right click on it and notice that there is a Properties option. You may notice that the Description of this file is empty. In fact, it can be filled by modifying the XML source of the .nivsproj. It also leads in the second case of the use of custom files.

  Transferring files to the aim of RT which can be used by the VeriStand engine.

  If you were to investigate the .nivsproj XML, you could first find the section of the custom files, then the tags of the element that you configured.

  

  Here are the relevant tags and a jump down,

  -It points to the source of the custom file. In this case, I added the file in the directory "C:\Users\Public\Documents\National Instruments\NI VeriStand 2011\Test procédures". He is able to solve the first component 'In common Doc Dir' because it's the common directory for VeriStand, and he added then the folder of the test procedures and the name of the file that I created.

  -Fill this tag gives us the opportunity to complete the description information that occurs when we right click on the file in the project.

  -Fill this tag gives you the ability to also send the file to the target deployment. Your VeriStand engine can then access this file during the operation. With respect to the types of files that you want to use, the link in the post above should help guide only.

  Please Note: change the XML of the project offers more customization and functionality of your project, but these changes should not be made whole. An incorrect change tags in the XML file can lead to results and poor execution. Then move forward with caution and only make minor changes at the same time.

  I hope this helps. Have a nice day, GSinMN

• Use of Custom Device or lvmodel real-time Module utilities

  Hello

  I tried to understand how to use the RT Set processor pool inside of a custom device or lvmodel vi. My idea is to use one of my multiple devices customized to configure CPU pools in the VI Init. I added my custom for the device project PXI chassis, but does not know how I can put these functions in my custom device. Otherwise, I thought I could use a RT project and then to generate a model for VeriStand since VI, but this does not work either. LabVIEW impossible to compile the VI containing the RT module functions.

  My question:

  How can I use the utilities of RT in A) a custom device or B) a lvmodel?

  Thank you

  Brent

  Assumes that the solution is quite simple. All I had to do was go to C:\Program Files (x 86) \National Instruments\LabVIEW 2011\Targets\NI\RT\vi.lib and add the library to the project.

  Note If you add an RT target to the project and create screws under the lens of RT and move to the top of the library is automatically added... with a few errors of path of difficulty.

  Still familiarizing myself with labview course.

• How to create a buffer custom MTS?

  Hello

  I would use a Philips Lumiled K2 bomber led to a design.

  It has an ashaped hexagonal pad below the Led.

  I created a footprint that works very well, my design seems OK

  But I don't like how I had to do...

  Let me explain, I drew a haxagonal form and made a mask of block matching and the mask welding...

  Then I added a round SMT pin, then I might give the new pad a name (so that I can use in my patterns (pin5)

  But there should be an easier way...

  In the editor of Ultiboard pieces, creating a custom stamp, I can add a pad "custom".

  Then a window opens to select a custom of the database buffer

  (Check the filter in the screenshot, it says 'custom cushion shape'). but I can't find any form in databases...

  Then, next setp, I would create my own pads custom, polygonal and any key SMT odd form,

  And give a touch, a name of pin (number attribute...)

  How can I create a custom carpet?

  Best regards

  Johan

  Hi johan,.

  so you can create a custom stamp: tools, database, Manager of database filter: custom cushion shape. Filter parts: Createnew part. Custom PADE form OK. An open design window. Now, you can create a form in any form you like, by location of shapes (circle or polygon or...) Being the reference point is inside the shape of shure. File, save it in the database. Give it a name. File, close. If you now create a new part, you can use the new pad like any other key in the system.

  consider gerhard

• How can I remove selected Custom view (s) of the event viewer Console tree?

  I looked at the MMC Help on create and manage custom views.

  I can't find a way to remove the custom filter views in the Console tree, which can be found on the left side of the event viewer.

  How can I remove selected Custom view (s) when they serve no more values?

  Problem solved

  I asked this question because I was unable to see what was going on in the event viewer and I couldn't find help in mmc HTML Help. However, now I see what's happening and I can give you a solution to my own question.

  Cause

  If I connect to the computer as a user with administrator privileges, I am able to use the event viewer to create a custom view filter that can be used by all users who have access to the event viewer. If I fix remove a view filter custom Console tree, I can't delete it unless I'm logged in as the user who created it.

  Solution

  1. Log the computer as the user who created the custom view.
  2. Start Event Viewer
  3. Use the right-click of the mouse on a custom view filter selected in the Console tree, open the drop down menu.
  4. Delete appears fourth in the bottom of the menu if and only if you are logged on as the user who created this view.
  5. Select Remove to remove the filter to custom view.

  If Delete does not appear in the drop-down menu, then it may not possible you connect as the user who created the custom view.

• Use a custom in a signal qml class

  I want to use a custom in a signal qml class, but have difficulties of implementation that correctly.

  My class is OutgoingInputs

  I give the floor

  qRegisterMetaType("OutgoingInputs");
  

  Save a pointer to it as a type of meta, which seems to be necessary, but when I also use

  Q_DECLARE_METATYPE(OutgoingInputs*)
  

  in the header file for the class, I get a compilation error.

  I have to save it without a pointer (was the idea here ) or is there another obvious error?

  Is there an example how to do this?

  I can receive the signal if my housing uses no parameters.

  I don't think you need to register as a metatype... a simple registry should do as it is the same as the use of the QML object:

  qmlRegisterType("mynamespace" 1.0, "OutgoingInputs");

  found this on the forums of qt:

  http://Qt-project.org/forums/viewthread/9657

  I hope that helps!

• How can I use Windows Defender to scan an individual file in Windows 7?

  How can I use Windows Defender to scan an individual file in Windows 7?

  To the best of my knowledge, it is not possible.

  A cheap substitute, albeit rather inconvenient, is to use a personalized analysis on the folder containing the file of interest.  Go to Windows Defender-> custom scan and then select the folder in the pop up dialog box.

• Violation of page protection - error get by using the custom plugin

  https://Apex.Oracle.com/pls/Apex/f?p=63937:1:

  The app link.

  Identification information

  -TINO

  [email protected]

  -test123

  When I try to send a page using the normal text field, he's fine. But when I use my custom plugin it throws error PPV.

  You can see the plugin code in the shared components of the application.

  Application is called theme MDL.

  
  

  There also may be problems with my page template but I doubt since the ordinary questions works very well.

  
  

  I developed this on 4.2.6.
  

  Incredible.
  The problem is that the plugin was wrapped with

  As soon as I took it, it could submit its value.
  It's funny how I had no idea how fix it, but as soon as I saw you talking about form I knew what to look for.

  It would be cool to know why this happens.

  Thank you!

• Have bourght an Adobe acrobat pro set DC improved and it not support Acrobat Pro 9. It was NOT indicated, so please inform me how I can use this upgrade

  Have bourght an Adobe acrobat pro set DC improved and it not support Acrobat Pro 9. It was NOT indicated, so please inform me how I can use this upgrade

  Since this is an open forum, not Adobe support... you must contact Adobe personnel to help

  Chat/phone: Mon - Fri 05:00-19:00 (US Pacific Time)<=== note="" days="" and="">

  Don't forget to stay signed with your Adobe ID before accessing the link below

  Creative cloud support (all creative cloud customer service problems)

  http://helpx.Adobe.com/x-productkb/global/service-CCM.html

• How can I add a custom image background?

  How can I add a custom image background? I have an image. It seems little checkerboard tiles open in photshop. How can I add a background .png image which is a really cool gradient for the checkerboard behind my image?

  Load your Image

  Go to the layers panel and if it is marked 'Background', click the icon of the lock to the right to unlock and change the "Layer 0".

  Create a new layer (click on the icon of paper rolled up at the bottom of the Panel). It will be 1 layer.

  Drag Layer 1 below layer 0 and it will serve as a background for any type of filler layer you want to layer 0.

  You can save your original as a PSD for you allow to go back and change it any time.

  Use file > export > save for Web create a jpeg file flattened for you or your client.

• How can I add my custom MuCow file made in muse

  How can I add my custom in muse MuCow widget file?

  If you have already created a custom file mucow, you can add it to a site of Muse using queue: Place...

• applicationContext remains "null" after using the custom url scheme to launch the app

  Hello

  I am currently working on a DPS application for a customer who wishes to use its own authentication system.

  The client system is implemented so that they send the valid token to a URI with a custom method.

  By setting the same pattern custom in my app DPS constructor, I can get the app from the login window.

  What is described in the library of DPS & Api store 2.32 documentation, I understand that

  " adobeDPS.configurationService.applicationContext must contain several variables associated to how the viewer was started or enabled:" ","this class represents the context under which the application is launched '

  
  

  However, in my application when I try to see what contains the applicationContext, the object is always 'null '. It doesn't matter if I started the application by clicking on its icon or if it was launched using the custom uri scheme.

  
  

  Is this a bug or am I missing something here? I really need this token.
  

  Hello

  After being stuck for a while trying to work with the url of my client for usage, I finally tested it with a modified version and have found the cause of the problem.

  Work of first information provided by a colleague who was apparently not detailed enough for the customer asked me to use a url of the form App. scheme://auth/#token=...

  It turns out that this kind of url can start or bring the app to the front, but applicationContext remains empty.

  My tests using a url in the same form as you suggested (eg. app. scheme://v1/slot/library) can trigger the app or transmit data.

  The documentation available in the SDK library & shop and article on how to use a custom template is very vague on what formats link actually works, and how we can vary with it.

  A breakdown of official links to pieces, that the parties do and what items can be modified (for example ' / appstate') within the API documentation would be a great help for developers, I think.

  Kind regards

  Lorin