How do you create array of enumerations for transitions in a state machine?

Similar Questions

• How can I create a language pack for Windows 7?

  How can I create a language pack for Windows 7

  No! You can use the language packs provided by Microsoft. "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• How can I create a better UI for Blackberry?

  How can I create a better UI for Blackberry?

  Do you it with love.

  or you could try this.

• How do you create a video thumbnail which becomes bigger if clicked?

  I have video thumbnails added on my site for youtube and facebook. Thumbnails are small if clicked. How do you create a video thumbnail which becomes bigger if clicked? Thank you, Kelsi

  Try to use a Widget for Composition.

  Add your thumbnail image in the relaxation area.

  Add your Youtube video link to the part of Lightbox.

  You may need to test your browser page, then resize the jQuery framework to your liking.

  If you want your video to show on the top of your page, try the blank publication Widget.

  If you want to fade the page behind your YouTube video box then try the Widget of Composition of LightBox.

  See how a Youtube video here

• How do you create bookmarks with Designer ES3?

  Based on this link

  http://blogs.Adobe.com/LiveCycle/2012/03/whats-new-in-LiveCycle-ES3.html

  It is now possible to add bookmarks through LC for XFA forms.  How do you go thru Designer? or is not feasible through output?  This is very critical for us because of the WCAG 2.0 compliance.

  I found this specific blog for ES2 +.

  http://blogs.Adobe.com/foxes/2011/04/11/creating-bookmark-in-XFA-forms/

  where its been possible with the addition of the macro.  However other readings of the designer of macros and indicate that the things about blogging is not necessarily officially supported.

  John brinkman in link: http://blogs.adobe.com/formfeed/2010/01/designer_es2_macros.html

  By John Brinkman - 19:38 on January 25, 2010

  Ennis: Unfortunately, even if I knew the answer to the question whether the macros will be officially supported - I could not answer. Our policy for blogs is quite clear that we cannot give specific information about the future of the product. But I encourage you to make your request by whatever channels you have. In the version of prototype, I'm not aware of any restriction on the http requests made by the flash plugin. that is, it is not wired like where flash http requests go through the stack of flash in Acrobat Reader network. As far as I know, the designer does not have the equivalent of a network stack. John

  To return to my question.  How do you create bookmarks for xfa forms in ES3 Designer?

  I created bookmarks by modifying the xml source of the xfa documents. I have created bookmarks for subforms intensively using this method

  the following code snippet

  Eligibility

  0,0,0

  normal

  gotoPage

  In the above example, I a void form called "Eligibility" and have created a bookmark using the tag options

  Let me know if you have any problems using this method

• How do you get your product key for Windows vista

  original title: How can you get your product key for window vista__

  A look at the case of computer packaging for a sticker with 25 digits, divided into 5 groups of 5 digits.

  If she isn't here, read this:

  http://www.Belarc.com/free_download.html

  http://www.magicaljellybean.com/KeyFinder/

  If your Vista operating system is still active and running, use one of the programs above to find your product key.

  See you soon.

  Mick Murphy - Microsoft partner

• How can I create sequential shooting (1 for each 'row') numbers in a script in multiple column?

  How can I create sequential shooting (1 for each 'row') numbers in a script in multiple column?

  Sorry, but for now there no such function to put sequential numbers in the column number drawn.

• How do you activate the mode debugger for xml publisher PeopleSoft

  Hi all

  How do you activate the mode debugger for xml publisher PeopleSoft

  E-BI/XMLP: how to manage BI Publisher/XMLP in Debug Mode/Turn LOGGING reports? [Video] (Doc ID 821195.1)

• How do you add a google calendar for the web site of muse, the updates are synchronized

  How do you add a google calendar for the web site of muse, the updates are synchronized?

  You can add Google Calendar using iframe which Google provides if you go to calendar settings.

  Once you insert this code into the page of Muse by object > insert HTML, the calendar will be displayed on the page.

  https://support.Google.com/calendar/answer/41207?hl=en

  Thank you

  Sanjit

• How do you put in a way for photos and videos to be uploaded to a site of Muse?

  How do you put in a way for photos and videos to be uploaded to a site of Muse?

  Place pictures is described in the tutorial video here - http://tv.adobe.com/watch/learn-adobe-muse-cc/placing-images/.

  For videos, have a look here - http://tv.adobe.com/watch/learn-adobe-muse-cc/inserting-a-youtube-flickr-or-hulu-video/. You can use the social widgets available in the Widget Library as well to be able to easily embed videos from video sharing websites such as YouTube and Vimeo.

  Or are you looking for your visitors/users of the site power publish/post videos and images to your Web site? If that's what you're looking for, then unfortunately Muse does not support download files through the interface at this time.

  Thank you

  Vinayak

• How do you create layers in flash builder?

  I was looking at this painting tutorial http://www.pixelhivedesign.com/Tutorials/Flash+painting+program/ and I was wondering how would you creating the layers in flash builder?

  I forgot that you do in Flash Builder. It must be a class unless you use mxml. So, here's a class that made the drawing:

  package
  {
       import flash.display.Sprite;
       import flash.events.Event;
       import flash.events.MouseEvent;
  
       public class DrawingBoard extends Sprite
       {
            private var board:Sprite;
            public function DrawingBoard()
            {
                 if (stage) init();
                 else addEventListener(Event.ADDED_TO_STAGE, init);
            }
  
            private function init(e:Event = null):void
            {
                 removeEventListener(Event.ADDED_TO_STAGE, init);
                 drawBackground();
                 board = new Sprite();
                 addChild(board);
                 stage.addEventListener(MouseEvent.MOUSE_DOWN, startDraw);
            }
  
            private function startDraw(e:MouseEvent):void
            {
                 stage.addEventListener(MouseEvent.MOUSE_UP, stopDraw);
                 stage.addEventListener(MouseEvent.MOUSE_MOVE, draw);
                 board.graphics.lineStyle(1, Math.random() * 0xffffff);
                 board.graphics.moveTo(mouseX, mouseY);
            }
  
            private function draw(e:MouseEvent):void {
                 board.graphics.lineTo(board.mouseX, board.mouseY);
            }
  
            private function stopDraw(e:MouseEvent):void {
                 stage.removeEventListener(MouseEvent.MOUSE_MOVE, draw);
                 stage.removeEventListener(MouseEvent.MOUSE_UP, stopDraw);
            }
  
            private function drawBackground():void
            {
                 with (graphics) {
                      beginFill(0xCCCCCC);
                      drawRect(0, 0, stage.stageWidth, stage.stageHeight);
                      endFill();
                 }
            }
  
       }
  
  }
  

• How do you create a flash in-game popup on the same frame?

  How do you create a flash in-game popup on the same frame?
  I need to make a popup in flash on the same chassis. Basiclly as you reach the framework and randomly (I know how to do things at random) a popup can appear saying that you got a price; and I want that things in the back remains the same.
  Please help me!
  Thankx in advance.

  Code is placed in the timeline in the framework where you intend it to be.

  You have not given enough information to be able to help with your problem of var timer.  Try to reason it yourself well.

• How do you create doc for echosign?

  Interested in Echosign, but need to know more about the creation of doc or getting into existing doc paper echosign.

  Hi George,.

  You can check these links for reference:

  http://helpx.Adobe.com/EchoSign/KB/send-agreement.html

  http://helpx.Adobe.com/EchoSign/KB/Creating-library-template.html

  Let me know if that helps!

  Kind regards

  -Usman

• Can someone tell me what I'm doing wrong when you create a native extension for iPad? (Very detailed)

  My company is developing a game for iPhone and iPad using Flash cs5.5 and Air3.0

  The customer requires that certain features be supported - these things as GameCenter, rating, etc... which none are currently supported by flash for the iOS.

  However, they provide us with a bunch of xCode example files on how they want things to work.

  My idea was to bridge the gap in functionality by creating a native extension using the xcode source that was given to me, giving me the required functionality.

  But first, I need to truly CREATE a native extension, even just a base echo/hello everyone... I followed all the steps of various guides and tutorials and I have managed to create an ipa and put it on my iPad 2 to test, but when the program starts, nothing happens, I find myself with a black screen. When I comment on the lines of code that initialize the extension, it fires just fine.

  (and Yes, I even tried to put things in try blocks where there was a mistake - no luck)

  So I hope that someone can read through the process of what I do below and point out what I am doing wrong, or what Miss me.

  What I use:

  Mini Mac running OS x 10.7.2 - this is used to run xCode 4.1 build 4B 110

  PC - Windows 7 home 64 bit - running Flash CS5.5 (version 11.5.1.3469) with the 3.0 SDK inside AIR. I also have the sdk 3.0 air in a separate file for the command-line running. (This is my primary development platform)

  The PC has flash builder installed, but I've never really used it, and I don't know how to use it... everything that has been built to date has been done using Flash CS5.5

  So, here's what I did.

  The first thing we do is to create a library static .a on mac.

  I open xcode and create a new project.

  • Select iOS framework and library, then select "Cocoa touch static library.
  • Give it a name, in this case "EchoExtension" and put it in a folder.
  • I then delete the file EchoExtension.h as all the samples I've seen so far do not use.
  • I then add 'FlashRuntimeExtension.h' to the project of the AIR3.0 sdk frameworks folder on my PC
  • I remove everything in my folder ".m", and then, next to several different examples and tutorials, type the following code:

  //

  EchoExtension.m

  EchoExtension

  //

  #include "FlashRuntimeExtensions.h".

  Echo FREObject (FREContext ctx, void * funcData, uint32_t argc, {FREObject argv)

  return argv [0];

  }

  //----------- Extention intializer and finalizer ----------------------------------------------------------------------------------------- ------------------------------------------------------------------------------------------ -

  A native context instance is created

  void ContextInitializer (void * extData, const uint8_t * ctxType, FREContext ctx, uint32_t * numFunctionsToTest, const FRENamedFunction * functionsToSet) {}

  Configure the number of functions in this extention

  for ease of reference, set the number of function that will use this extension.

  int FunctionCount = 1;

  set the number of function pointer reference that will use this extention.

  * numFunctionsToTest = FunctionCount;

  create an array to store all the functions that we will use.

  FRENamedFunction * func = (FRENamedFunction *) malloc (sizeof (FRENamedFunction) * FunctionCount);

  create a table for each function entry

  Func [0] .name = (const uint8_t *) "echo"; the name of the function

  Func [0] .functionData = NULL;                    the data type

  Func [0] .function = & echo;             the reference to the real function

  Save the array to a pointer.

  * functionsToSet = func;

  }

  A native context instance is deleted

  void ContextFinalizer (FREContext ctx) {}

  return;

  }

  Initialization of each extension function

  void ExtInitializer (void * extDataToSet, ctxInitializerToSet FREContextInitializer *, FREContextFinalizer * ctxFinalizerToSet) {}

  * extDataToSet = NULL;

  * ctxInitializerToSet = & ContextInitializer;

  * ctxFinalizerToSet = & ContextFinalizer;

  }

  Called when the extension is unloaded

  void ExtFinalizer (void * extData) {}

  return;

  }

  • I'll then 'product', 'building' and it creates libEchoExtension.a
  • I'm copying this .to file on my PC.

  I am now finished with this abandoned mac of God (* shudder *)
  Back on my PC, I create a folder for my test project. For all the intentions a purposes, we will call this "D:\src\EchoExtension" then I create 2 folders, one called "lib" and one called "app". Lib, it's where I'm going to create the actionscript source for my extension.

  • In my lib folder, I create a new fla in flash cs5.5, called "EchoExtension.fla".
  • I create my lib folder, the following:
    • com\extensions\EchoExtension\EchoExtension.as
    • a folder named 'Build' in which I place my libEchoExtension.a file.
  • I have in my EchoExtension.as file, place the following code:

  package com.extensions.EchoExtension

  {

  import flash.events.EventDispatcher;

  import flash.events.IEventDispatcher;

  import flash.external.ExtensionContext;

  SerializableAttribute public class EchoExtension extends EventDispatcher

  {

  protected var _extensionContext:ExtensionContext;

  /**

  * Constructor.

  */

  public void EchoExtension()

  {

  Super();

  Initialize the extension.

  _extensionContext = ExtensionContext.createExtensionContext ("com.extensions.EchoExtension", "main");

  }

  public void echo(Prompt:String):String

  {

  Return _extensionContext.call ("echo") as String;

  }

  }

  }

  • In my main fla, on the first layer of the time line, I put just the following code to make sure that did get file included when I publish the swc.

  import com.extensions.EchoExtension.EchoExtension;

  var ext:EchoExtension = new EchoExtension();

  Stop();

  • I then opened upwards from my fla publication settings, disable the swf - which I don't need, and check the swc and ensure it generates in my generation folder.  «. "/ Build/EchoExtension.swc.
  • I also updated the player Air 3.0 (which I can do because I managed integrated AIR 3.0 along side my AIR 2.6 and can build both without any problem)
  • I then publish the swc. So far so good. No problems.
  • I then made a copy of the CFC and rename it to EchoExtension.swc.zip, how I extracted the library.swf file and place it in the folder of my generation.
  • I then create extension.xml in case of generation that contains the following code:

  " < extension xmlns =" http://ns.Adobe.com/air/extension/2.5 ">

  com.extensions.EchoExtension < id > < /ID >

  < versionNumber > 1 < / versionNumber >

  <>platforms

  < platform name 'iPhone-ARMS' = >

  < applicationDeployment >

  < nativeLibrary > libEchoExtension.a < / nativeLibrary >

  < initializer > ExtInitializer < / initializer >

  < finalizer > ExtFinalizer < / finalizer >

  < / applicationDeployment >

  < / platform >

  < / platforms >

  < / extension >

  • Now, at this point, I'm a little suspicious, because I build for the iPad2... the platform is iPhone... I thought that may be a problem and at some point I have tested the same build on the iPhone4 and had the same results. I also tested using the name of the platform of the iPad-ARM and got the same results... So I don't think that's the problem, but I'm not sure.
  • Now, to make things easier, I created a batch file called "buildane.bat" in my file generation. That's what I use to create my .ane file and it contains the following command line:

  D:\SDKs\AirSDK30\bin\adt-Paquet - target ane EchoExtension.ane extension.xml - CFC EchoExtension.swc - iPhone-ARM library.swf libEchoExtension.a platform

  • I then open a command prompt and run buildane.bat and Ottoman. My donkey is created. My generation file now has the following files in it:
    • buildane.bat
    • EchoExtension.ane
    • EchoExtension.swc
    • EchoExtension.swc.zip
    • extension. XML
    • libEchoExtension.a
    • Library.swf

  Now that I have my swc, donkey and it's time to create my sample application that will be used to test my new extension.

  • I go back to my D:\src\EchoExtension folder and go to the folder app ealier, I created.
  • I then create a new flash project called EchoExtensionTester.fla
  • I open the action script settings, paths to library and add the CFC I created in my D:\src\EchoExtension\lib\build file to my project.
  • On my stage, I create a field called text txtInput, a field of dynamic text named txtEcho, and a couple of buttons called btnClear, btnRuntime and btnEcho
  • I open the first layer of the timeline, and place the following code:

  imports of base.

  import flash.desktop.NativeApplication;

  import flash.events.MouseEvent;

  import flash.text.TextField;

  import the extension of our swc.

  import com.extensions.EchoExtension.EchoExtension;

  the value of our input text to the need the softkeyboard field

  txtInput.needsSoftKeyboard = true;

  Add event handlers to our buttons.

  btnEcho.addEventListener (MouseEvent.CLICK, btnEcho_Click);

  btnClear.addEventListener (MouseEvent.CLICK, btnClear_Click);

  btnRunTime.addEventListener (MouseEvent.CLICK, btnRunTime_Click);

  create our variable expansion.

  var ext:EchoExtension;

  Try

  {

  initialize our extension of echo.

  Ext = new EchoExtension();

  } catch (error) {}

  txtEcho.text = 'Error when trying to create new EchoExtension:\n\n' + e;

  }

  Stop();

  Delete the text echo field

  function btnClear_Click(e:MouseEvent):void

  {

  txtEcho.text = "";

  }

  just to test, put the latest version of the air runtime in our text field, so we can make sure we run air 3.0

  function btnRunTime_Click(e:MouseEvent):void

  {

  txtEcho.text += "\nRuntime version =" + NativeApplication.nativeApplication.runtimeVersion; ".

  }

  call the extension, passing all that is in the text input field and get back and place it in our text echo field

  function btnEcho_Click(e:MouseEvent):void

  {

  txtEcho.text += "\n";

  Try

  {

  txtEcho.text += ext.echo (txtInput.text);

  } catch (error) {}

  txtEcho.text += "\nError call ext.echo:"+ e;»

  }

  }

  • I save the project, Open Air for the parameters of the iOS, then perform the following settings: (Yes, I know... I'll have to use adt to perform the build, but I need to first create the swf file)
    • File: EchoExtensionTester.ipa
    • AppName: EchoExtensionTester
    • Version 1.0
    • Landscape
    • Full screen on
    • Auto orientation is disabled
    • GPU rendering
    • device: iPad and iPhone
    • RES: high
    • Deployment: I use my certificate and profile provisionging that I use for my main project (that works) and defined for the test of the device.
  • I close the window and save again... but before I publish, I opened newly created "EchoExtensionTester - app.xml" which is located in my app folder.
  • I add the extensions <>< extensionID > com.extensions.EchoExtension < / extensionID > < / extensions > to the XML in the file so now it looks like this:

  <? XML version = "1.0" encoding = "UTF-8" standalone = 'no '? >

  " < application xmlns =" http://ns.Adobe.com/air/application/3.0 ">

  <>Extensions

  < extensionID > com.extensions.EchoExtension < / extensionID >

  < / extensions >

  < id > EchoExtensionTester < /ID >

  < versionNumber > 1.0 < / versionNumber >

  < file_name > EchoExtensionTester < / name of the file >

  < description / >

  <!-to locate the description, use the following format for the description element. < description > < text XML: lang = "fr" > App English description goes here < / text > < text XML: lang = "fr" > French App description goes here < / text > < XML text: lang = "ja" > Japanese App description goes here < / text > < / description >->

  < name > EchoExtensionTester < / name >

  <!-to locate the name, use the following format for the name element. < name > < text XML: lang = "fr" > insert here the name App English < / text > < text XML: lang = "fr" > insert here the French App name < / text > < XML text: lang = "ja" > insert here the Japanese App name < / text > < / name >->

  < copyright / >

  < initialWindow >

  < content > EchoExtensionTester.swf < / content >

  standard < systemChrome > < / systemChrome >

  < clear > false < / transparent >

  < visible > true < / visible >

  true < fullscreen > < / full screen >

  landscape of < aspectRatio > < / aspectRatio >

  GPU < renderMode > < / renderMode >

  < maximizable > true < / maximizable >

  < minimizable > true < / minimizable >

  < resizable > true < / resizable >

  < autoOrients > false < / autoOrients >

  < / initialWindow >

  < icon / >

  < customUpdateUI > false < / customUpdateUI >

  < allowBrowserInvocation > false < / allowBrowserInvocation >

  < iPhone >

  < InfoAdditions >

  <! [CDATA [< key > UIDeviceFamily < / key > < table > < String > 1 < / string > < string > 2 < / string > < / array >]] >

  < / InfoAdditions >

  < requestedDisplayResolution > top < / requestedDisplayResolution >

  < / iPhone >

  < / application >

  • I save the changes to the xml file and return to Flash. I then publish.
  • The swf file is created as it should be, but then I get the error message:

  Error creating files.

  A native implementation extension 'com.extensions.EchoExtension' required by the application is not found for the target platform.

  • Now, while it is a pain in the rear, I again, this was going to happen because in my reading tutorials and samples, they have all said that you use adt to build the ipa... but that is fine... all I wanted anyway, was the swf, which I now have in my app folder.
  • I close flash because I no longer need and I create a new batch file: (Note: I have change the name of the cert, profile and password for this post)

  CLS

  "D:\SDKs\AirSDK30\bin\adt" - package - target the ipa-ad-hoc - stores pkcs12 - keystore "D:\src\mycert.p12" - storepass MYPASSWORD-putting into service-profile "D:\src\myprovfile.mobileprovision" "EchoExtensionTester.ipa" "EchoExtensionTester - app.xml" "EchoExtensionTester.swf" - extdir... / lib/Build

  Set dummy = p

  ECHO done

  • I then open a command window in my app folder and run build.bat.
  • I wait about 2 minutes...
  • ...
  • ...
  • YAY! My ipa file was created without error reported so far... Time to copy this bad boy to the iPad and see what happens.
  • I opened iTunes, drag "EchoExtensionTester.ipa" to the applications, then synchronize my device...
  • ...
  • YAY! iTunes installed ipa on the device... and there is a white icon bright and shiney for Echo Extension tester...
  • I open the app... and...
  • nothing.
  • I'm waiting for
  • still nothing.
  • I go to the bathroom.
  • I'll be back... still nothing... just a black screen.
  • I press the home button on the iPad, the app minimized, I restore it... nothing... black screen.

  management of human resources. Time to do some trial and error to see if I can figure out what the distribution.

  • As a test, I opened my fla and I comment out the following lines:
    • Ext = new EchoExtension();
    • txtEcho.text += ext.echo (txtInput.text);
  • I then rebuild the swf... get the same error (don't care)... I then rebuild the ipa using the batch file... and reinstall it on the device when it is made.
  • Exactly the same thing...
  • I opened the xml file... and remove the < extensionID > com.extensions.EchoExtension < / extensionID > line, save and re - run the batch file again... Wait for the ipa ends, then run it on the device.
  • I start the program on the iPad and it starts perfectly... with the exception of the commented line of code actually create and call the extension, everything works as it should. The runtime on the device reports as 3.0.0.4080
  • A test, I opened the .fla save and uncomment the 2 lines, I commented out above... keep the xml file extensionID, I re - publish the ipa... of course, this time, it actually creates the flash API, because the id of the extension is not in the xml file.
  • I put the file API with the extension in place on the ipad code... The fire and make the txtInput text and press the button of the echo. I get the following error:
    • Error calling ext.echo: TypeError: Error #1009
  • I suspect it's because I failed to include the extension in the descriptor... but when I build it with the extensionid in the xml file, I just get a black screen. I'm 99% sure that the context of the extension in the ext object is null (because that's what happens when I run Flash debug without extension lines in the xml)

  And here I am stuck.

  Can someone tell me what I am doing wrong or what I forgot to do?

  Thank you.

  Hi can check you if the CFC of the native extension is linked as external?

  Next image can help locate and change the link type of CFC.

  

  The issue that many people face here (i.e. extension works fast/interpreter mode and only when they are packed in standard mode) occurs only when the SWC of the NE is not linked externally.

  I hope this helps.

  Kind regards

  Mathyas blabla

  IOS of the AIR

• How can I create a full recovery for OS and preinstalled software media?

  Hello
  My son´s accompanying the new Satelite L855-10U preinstalled OS and much other software already installed on the HARD drive, but no installation media, the client is supposed to create a tool from Toshiba.

  I created 6 Swedish recovery for the operating system using the tools Toshiba had installed on the HARD drive.

  To do this 6 Swedish, I created with the Toshiba Recovery tool contain the operating system and all other preinstalled software?

  How can I create the installation media full and usable if not for the operating system and all other preinstalled software?

  I can´t find all the information on the backup software pre-installed with the exception of the BONE. Is there complete information how to do the above, in the manual of the computer, or have you missed this information?

  I would like to know how I can create media backup complete and usable for the operating system as well as for all other preinstalled software, so I can recreate all the facilities of the plant at a new disk if/when the original HARD disk crashes.

  Is there a partition hidden with pre-installed software, and if so, how can I create a backup of this partition, or all the software, so I can reinstall everything if the HARD drive fails, if it is already not with the Swedes 6 Toshiba tool created for me?

  Forward to your response and to complete your customer documentation about the complete instructions for installation and recovery media creation.

  Thank you very much!

  Baltazar

  Hello

  On this forum, you will find a lot of useful comments on the recovery image saved on the HARD drive and its operation to the facility and the creation of recovery disks.
  All this is clearly and simply.

  Front of Toshiba offer new people for laptop in software development create recovery image. This recovery image will be created for each laptop model (specific hardware configuration). Recovery image contains the operating system, all necessary drivers, tools/utilities Toshiba specific and some other software like DVD/Blu-Ray, Microsoft Office test drive and the antivirus application. With this configuration every laptop owner can begin to use the laptop without having to install important applications.

  This package is then saved on the HARD drive and can be used for the installation of HARD drive recovery - http://aps2.toshiba-tro.de/kb0/HTD1303440001R01.htm. In other words, if something is wrong with HARD drive recovery facility you can reset the preinstalled operating system and reinstall recovery imae. After that make you have absolute same settings you had after purchase and first start of the laptop.
  HARD drive recovery image can not be used if:
  -HARD drive is defective
  -you have installed the version of the own BONE
  Structure of the HARD disk partitions - is changed
  Recovery image - HARD drive is deleted or moved to another partition or copied to the external device.

  To avoid all this Toshiba recommends the creation of recovery disks. Using these disks, you will be able to install the OS on the new drive HARD or in any other situation listed above.
  Please note: the use of recovery disks will remove all HARD drive, create the new recovery partition and install image recovery, so you still have the same settings.

  I hope I can help you with my explanation. If you have any other questions you are welcome.