How do you determine the type and speed of your RAM installed what?

Similar Questions

• How do you set the time and date on fax for hp officejet 4622

  How do you set the date and time on the fax for hp officejet head 4622

  Hi Chrisharrison23,

  Date and time should be under configuration tools or fax setting in the printer control panel.

  OfficeJet 4620:

  1. click on the key icon on the control panel of the printer

  2. go to tools

  3 scroll to the date and time

  I would like to know if you are able to locate the setting?

  Officejet 4622: Set the date and time

   

• Make sure that wire you all the inputs and outputs of your node library function call?

  This document says "make sure that wire you all the inputs and outputs of your node library function call.

  http://digital.NI.com/public.nsf/WebSearch/7253D2F0D91F68058625752F005AB672?OpenDocument&submitted&&...

  But all the terminals on the right side of the call library node considered "outputs" referred to in the foregoing statement?

  This same document continues to show the right way to allocate memory with this illustration and in the illustration, the right "outputs" are left without junctions.

  

  Am I right in assuming that the only terminals that count as outputs, those who use the code of the DLL (modify) as output?  If it is true, then all other terminals output associated with the values entered alone so don't really account as outputs, correct?

  In the parameter call-library configuration screen there is a "Constant" check box and the help that he wrote "indicates whether the parameter is a constant."  What is this box? for me in the setup of the DLL call

  Finally, assuming that a call from the DLL that is supposed to write in these five outputs, is it legitimate to use constants like this to book a space of memory for the output values?

  

  How about if local variables associated with the output terminals are used instead?

  

  Despite the linked document, it is necessary to connect the corresponding entry for simple scalar output parameters (for example a digital). LabVIEW automatically allocate memory for them. If you do not want the entries for all the output wire anyway, there should not be no difference between a constant and a local variable; I would use a constant to avoid useless local variables.

  For settings that are only entries, there is not need to connect the outlet side. It's a bit simplistic since all parameters are entered only and get one result (other than the return value), you pass a memory address and modify the content to this address, but LabVIEW manages this dereferencing pointer for you. If you want to really get into the details, learn more about pointers in C.

  The "Constant" check box acts as the qualifier "const" on a c function parameter. It tells the compiler that the function you are calling will not change this setting. If you call a function prototype includes a const parameter, then you must mark this as a constant parameter when you configure the call library function node. Otherwise, I wouldn't worry on this subject.

• [CS2] [VB] How can I determine the type of object to a PageItem?

  I use InDesign CS2 and VBScript

  Loop to the bottom of the PageItems in a Page, I need determine the Type of object (TextFrame, group, GraphicLine... each process) and PageItem accordingly.

  Is there a method/function VBS wiil returns the Type of an object as a string or a value. Or what I need to check the existence/non-existence of a particular property associated with a particular object for this type?

  Alternatively, is there a JavaScript function that will do what I can call VBScript?

  For the record: TypeName is what you need.

  For example, when the cursor is planted in the text return TypeName (Ind.Selection (1)) 'PointInsertion.' When a text block is selected, it returns "TextFrame.

• How do you determine the steps to use when they need to change the info in the diaglog box "WINDOWS SECURITY" of win 7, which asks the user and the password?

  My background: I can only see this dialog box titled WINDOWS SECURITY when I want to access my log to router with my office router connection. The dialog box refers specifically to my router, and asking a user and a password.

  A long time ago that I asked to remember and, of course, I forgot it and the location that I wrote. Now I am unable to determine what I thought, would be a simple reset and the steps that allow me to perform a reset. After a series of search phrases on Bing, and in the community of the SP as well as Win 7 Pocket administrator index I can't find the steps because the dialog box, it seems with the title of the WINDOWS SECURITY is too general.

  I need to install a new router and need to change the user and password. I don't know if user and password are unique to the company of router or Microsoft Win 7. Nevertheless, I can reset thinking them they are unique to me and Microsoft because there is no query such as, "you forgot your password?', whereby get you a temporary.  These steps are already stationed in the community and I just can't get into the research phase right? (What is related to IE 11?) Thank you.

  > I need to install a new router and need to change the user and password.

  Do you want to connect to your old router?  If Yes, most routers have built-in switch you tripping with a paper clip or similar to force a reset to the factory settings.  You can then access the default connection.

  If it's the new router, it should be accessible with the factory default login. If you don't know please post that make the exact and the model of the router.

• How can you determine the absolute path to a NetStream object created dynamically?

  We strive to implement a video captioning with a freeware component, ccforflash. This requires us to provide an absolute path or relative to our NetStream. How can we determine this path in Flash CS5 AS3?

  CCforFlashCS5 documentation:

  2. objects "name and path.

  Type the name and the path.  It is the name of the instance of the object with which CCforFlashAS3 will synchronize. It must be spelled correctly, since CCforFlashAS3 queries the object with this name for the synchronization information to synchronize subtitles. The path must also be included; be compared to the CCforFlashAS3 (i.e. this.parent) component or the absolute path of the main floor of the film (root)".

  I guess I understand your problem and accepts only a great way to identify a path to something compared to doing AS3 AS2.  I'll see if I can raise the interest of someone else in your ad that is a detective better than me.

  But if I can get stoopid for one minute and suggest trying something (I would try it)... If you have access to the code where is instantiated the NetStream object, just after he is given life, assign the instance to a variable, you have in the main timeline and use this variable (and the root timeline or a 'this' - reference database for path requirement) for your CCforFlashCS5 needs.

• How can I determine the type of image to be used before loading an image?

  I'm developing an application using VB 2005 which measures two 8-bit or 16-bit image files. When I saw the picture, I find that I have to set the type of image the image buffer before playback of the image in it. For example, if I read a 16-bit image in a buffer of 8 bits, the image is truncated. I guess I could read the image in a 16-bit buffer and retype it if the pixel values are less than 255.

  Is there a better way to do it? Can I determine the number of bits of an image before loading in a buffer?

  Thank you!

  Hi Steverino,

  Olivia is incorrect... VDM has a function called GetFileInfo which does just what you want. It only reads the header of the image but does not load the entire image in memory. It will give you various properties such as the bit depth.

  I think that on the new .NET support, there can exist here: NationalInstruments.Vision.Analysis.Algorithms.GetFileInformation.

  Thanks to the ICB and our legacy of .NET support, it's probably a similar name.

  Eric

• How do you control the position and size of the images, IE. photo to the printer?

  HP Officejet 8600

  Windows XP

  I'm trying to figure out how to control the position and the size of the photos or photos that are included in an email that I send to my printer via HP ePrint.

  Hello. The process that I mentioned using Word provided that if we were send emails to the printer from a computer. If you just transfer emails from the iPhone to the printer there is no option to control the position of the jpg print. This isn't something that can be handled right now on ePrint.  The attachment will be printed on a separate page. The body of the email will be printed separately of the spare part.

• How do you determine the VI file specification in executable?

  Under LabVIEW 2010, how can I determine a specification of file full of screws that he resides in a built executable file?  I have location of the executable file and I have the location of the screws on the drive when the executable was generated.  I hope that it has a property of LabVIEW that will tell me the specifications for each file in the executable.

  
  

• How do you set the time and date for the fax on HP Office Jet 4622 all-in-one printer?

  I installed the all-in-one printer HP Office Jet 4622 and everything works like.  However on the test page for the date and fax are showing Jan-00-00 00:00 AM.  I don't know how to change the date and time.  Help, please.  Thank you.

  Use the Setup (wrench) button on the front of the printer to look through the settings menu to set the date and time of the printer.

• How do you control the type of TLS alerts sent by JSSE?

  I'm working on an application which certificate validation path it takes to plug in the JSSE. So, I implemented my own X509TrustManager that implement the methods 'checkClientTrusted' and "checkServerTrusted", such as when the path of the application certificate validation fails, it throws a CertificateException according to the choice of the method signature. In addition, CertificateException has four subclasses: CertificateEncodingException, CertificateExpiredException, CertificateNotYetValidException and CertificateParsingException. The subclass of CertificateException that throw you on the certificate path validation failure makes JSSE send a TLS alert relevant to the counterpart of SSL handshake. HOWEVER, subclasses of CertificateException do not contain anything to send TLS alerts important much like certificate_revoked, unsupported_certificate and many more. How can you make JSSE send these alerts in this case?

  There is no code in JSSE to send one of these alerts. If you throw any CertificateException of these methods, it will always send an alert_certificate_unknown.

  (OpenJDK 6 b10, June 21, 2010 CBC)

• How do you use the step and resume for 10 indesign pages

  Hello

  I have a record for a mailing label. I have successfully used the step and repeat to create 2 columns and 8 rows for a document or a page. How to create 2 columns and 8 rows to say 10 pages with step and repeat? What you have to do with the pages?

  Thanks in advance

  You're simply trying to get additional copies of the same label? You don't want to do several pages to do, just print x pages.

  This looks like the same project of the other day. You really need to be clear about what you're doing: you said you wanted 50 copies of the same label and I told you not to worry about merging data, but maybe what you really meant you wanted pages full of the same label, but many different labels in the file. It IS a project of data merge, but you still would be implemented with stepa and repeat the process to put a series of placeholders in each position of the label, but you do only one page in the merge template. Merge all your records, one record per page, then print as many copies of the file as that required for the number of labels you need.

• How do you manage the layers and objects and to rear of the other

  I do not understand how it is possible to have many objects on the stage and be able to handle the motion tweens with each of them, but ALSO to manage the objects are in front and behind them. I have a boot animation and there are many ongoing action, and there are times where I need my guys to be in front of the objects, and the time when they need to be behind.

  I do not know how to handle things regarding the layers and the movements in a way so I can get the items in the order that I need them to be (as the element on which passes in front of the other).

  Someone at - it advice or a way that I can manage my objects and queries and be able to classify them on the stage so that I can arrange things how I need them to be investment and who should be in front of the other objects?

  Yes, if you want to animate 20 items, you must put each item in its own layer. There are a number of ways to make it a little less tedious. For example, if you place each element on the stage, in the same layer, and then name each instance, you can then select all the elements on the stage and then select the Edit menu and then the timeline and finally distribute to layers. This will place each item in a layer newly created at the same position on the stage and then name each layer to match the name of instance for this element.

  To change the Z-order of any given scene element, you can use a number of different methods. One method is to use Actionscript as I mentioned in my last post. ActionScript is the best method if you need to be able to respond to user input and show the changes that cannot be built in animation since the beginning. If you're just showing an animation preset, you can use a number of methods different timeline based.

  In your example, if you want to have a figure to move another object on the stage, you can do that by creating two layers of the same object. One on one with the figure between the two. So that you have the object to move around both in front and behind, the figure. When you want to display the number in front of the object, set the object in the layer that is on top is not not visible. Then you will see only the object that is at the origin and the figure in front of him. How you go about changing the visible property or the alpha property, of this object. You can use keyframes in the timeline panel or the simple ActionScript.

  You want to find a small pool in the basics of Flash or take a book to guide you. There are a number of very good tutorials on the basic available free animation: http://www.gotoandlearn.com, or at a cost: http://www.lynda.com .

• How do you know the date and time of synchronization in the windows version?

  Where can I see the date and time of synchronization?

  Is there a toolbar button in the Palette to customize. Move this button to a toolbar or in the Menu box open. When you hover over this button, a ToolTip will appear with the day of the week and time of the last synchronization event.

• How add you a file type and its program associted to windows vista?

  FBREADER installed and it did not link with the type .epub file.

  Hello Zagnut,

  According to this TechNet thread, where the poster asks a similar question, there is no way to add a program to the list. The only one who can is the developer of the software:
  http://social.technet.Microsoft.com/forums/Ta/w7itproui/thread/122db107-6970-4f94-BC43-675e438c7d23