How do you know what screw are running?

Similar Questions

• How can you know what drivers and programs are essential and those that can be deleted without harming my computer?

  Original title: completely clueless

  I'm totally clueless when it comes to computers, but I try very hard to learn. I am using the help section a LOT, but I can't seem to find an answer to the only thing that makes me crazy. How can you know what drivers and programs are essential and those that can be deleted without harming my computer? I have a very basic net accountant I learn on before I screw up a portable more expensive and I do a cleaning on my C and D drives to improve performance because it runs so slow but it tells me I have the drivers who slow down Windows. I would greatky appreciate any assistance from someone who has the patience of a saint and is willing to take the time to explain it to me, in terms laymans. Thanks in advance

  Drivers: you should know what you bought (in your machine) and what * you * want out of it.  If you want stability and things work properly - let alone the drivers.  If you want more performance check (and other games) in the drivers of motherboard chipset and video network from the manufacturers Web site... For more stability stick with the OEM website (HP, Dell, Lenovo - the assembler of the whole machine) and slightly more performance/push the limits (even if they want to work too - so still some stability) - access to websites of its components manufacturer.

  With regard to the programs: you can decide what you use and do not use.  If you are not sure, look it up (Google) or ask.

• Should I delete the programs of 2004? How can you know what is safe to delete?

  Original title: remove programs

  I think I have a virus.  I see on my computer a few applications with and installed as of 2004.  The computer was purchased in 2007.  When I run it in safe mode, it works fine and all applications have a date of 2007 or newer.  Should I delete the programs of 2004? How can you know what is safe to delete?

  Hello

  This is not an indication of malware. Could be those are placed on the
  computer by the manufacturer of the system and that was the date that firstly, they prepared their
  for massive installation, or if they did not set a date and be used arbitrarily.

  =============================================================

  If you need search malware here's my recommendations - they will allow you to
  scrutiny and the withdrawal without ending up with a load of spyware programs running
  resident who can cause as many questions as the malware and may be more difficult to detect as the
  cause.

  No one program cannot be used to detect and remove any malware. Added that often easy
  to detect malicious software often comes with a much harder to detect and remove the payload. Then
  its best to be thorough than paying the high price later now too. Check with them to one
  extreme overkill point and then run the cleaning only when you are sure that the system is clean.

  It can be made repeatedly in Mode safe - F8 tap that you start, however, you must also run
  the regular windows when you can.

  TDSSKiller.exe. - Download the desktop - so go ahead and right-click on it - RUN AS ADMIN
  It will display all the infections in the report after you run - if it will not run changed the name of
  TDSSKiller.exe to tdsskiller.com. If she finds something or not does not mean that you should not
  check with the other methods below.
  http://support.Kaspersky.com/viruses/solutions?QID=208280684

  Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone.
  (If Rootkits run UnHackMe)

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Malwarebytes - free
  http://www.Malwarebytes.org/

  Run the malware removal tool from Microsoft

  Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

  You should get this tool and its updates via Windows updates - if necessary, you can
  Download it here.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
  (Then run MRT as shown above.)

  Microsoft Malicious - 32-bit removal tool
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

  Microsoft Malicious removal tool - 64 bit
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

  also install Prevx to be sure that it is all gone.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Prevx - Home - free - small, fast, exceptional CLOUD protection, working with others
  security programs. It is a single scanner, VERY EFFICIENT, if it finds something to come back
  here or use Google to see how to remove.
  http://www.prevx.com/   <-->
  http://info.prevx.com/downloadcsi.asp  <-->

  Choice of PCmag editor - Prevx-
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  Try the demo version of Hitman Pro:

  Hitman Pro is a second scanner reviews, designed to save your computer from malicious software
  (viruses, Trojans, rootkits, etc.). who infected your computer despite safe
  what you have done (such as antivirus, firewall, etc.).
  http://www.SurfRight.nl/en/hitmanpro

  --------------------------------------------------------

  If necessary here are some free online scanners to help the

  http://www.eset.com/onlinescan/

  New Vista and Windows 7 version
  http://OneCare.live.com/site/en-us/Center/whatsnew.htm

  Original version
  http://OneCare.live.com/site/en-us/default.htm

  http://www.Kaspersky.com/virusscanner

  Other tests free online
  http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

  --------------------------------------------------------

  Also follow these steps for the General corruption of cleaning and repair/replace damaged/missing
  system files.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
  RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker
  (SFC.exe) program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------------------------------

  If we find Rootkits use this thread and other suggestions. (Run UnHackMe)

  http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/a8f665f0-C793-441A-a5b9-54b7e1e7a5a4/

  I hope this helps.

• In Task Manager, how can I know which processes are running in the background?

  In Task Manager, how can I know which processes are running in the background?

  Hello.

  What exactly is your problem?

  Details please! Thank you.

  • When you open the Task Manager, go to processes
  • under the seat of tab CPU reading 01, 02, or higher... that's how you know what programs are underway on the bottom.

  Helped?

• IPhone 6 - How will I know what apps are underway in the background?

  IPhone 6 - How will I know what apps are underway in the background?

  On multitasking on your iPhone, iPad and iPod touch - Apple Support

  Scroll to the bottom where he treats background App update!

  You can visit these settings under settings > general > background App update.

• How do I know what programs are safe stop execution or remove it from the startup of Windows 7?

  How do I know what programs are safe stop execution or remove it from the startup of Windows 7?

  original title: start up programs?

  Hello

  You can use these to control which startup programs. Many others settle
  start-up haven't really needed to be there. Such as Acrobat Reader (Adobe), WinAmp
  Agent and many others who are responsible for pieces of themselves to get started more quickly (not a problem
  on the machines of today ' hui) and of course they can control the files they support (to be
  course you continue to use only). Those who are only common examples and didn't want to not say
  as a slam on these programs very well.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929135

  How to change, add or remove startup programs in Windows 7
  http://www.SevenForums.com/tutorials/1401-startup-programs-change.html

  Autoruns - free - see what programs are configured so that it starts automatically when your
  system boots and you log in. Autoruns is also the full list of registry and files
  locations where applications can configure start automatic settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx

  -------------------------------------------------------------------------

  Performance and maintenance tips
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/welcome-to-the-performance-and-maintenance-Forum/19e5d6c3-BF07-49ac-a2fa-6718c988f125

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• How can I find what programs are running on my laptop

  How can I find what programs are running on my lap top

  Hello

  • Right-click on an empty space on the taskbar
  • Click Start Task Manager
  • Processes tab will show you the programs that are running

  Kind regards.

• every time when I start it up and go to my office, a 2 x 3 box pops up for a split second, how do you know what he says?

  When I boot my laptop with Vista, loads and gets on the desk on either primary or a guest account, a small box about 2 x 3 "appears for only a fraction of a second, but I can see there is a red X on the top right corner and two clickable buttons, but I can't read what it says.  How will I know what it says; where can I go to find it.  There is nothing in sysconfig on startup, etc.

  You must have something in the system start, probably in one of the keys to registry Run, which is something you don't recognize to run at startup.

• I try to install Service pack 3 on my Windows XP, how do you know if there are other programs running

  I try to install Service pack 3 on my windows XP system when I try to download I have the C:\windows\ssystem32\ntdll.dll message is opened or currently in use by another application you approach other applications & try again, I'm connected only to Microsoft, how know if there are other applications running.

  I hope it's because you just made a new installation of Windows XP?

  Through these two articles:

  • Steps to take before you install Windows XP Service Pack 3
  • Windows XP SP3 - read all the prerequisites for a successful installation

  What I propose is the following...

  1. Go to this web page: How to reset the Windows Update components? and use the FixIt utility in aggressive mode.
  2. Reset.
  3. Download here all the SP3 Setup file: Windows XP Service Pack 3 Package of Network Installation for developers and information technology professionals and save it to the Office of the administrator of the user account on the computer in question.
  4. Reset.
  5. Double-click the installation file downloaded in step 3 and follow the instructions.

• How can you know what remains during a restore?

  I just got a new iphone more than 6 s and its been 2 days and is always restore things. is it possible to know what remains to restore or if its stuck? I was going to upgrade the software on it but can not until its finished. TIA

  Hello SCB1021,

  Congratulations on your new iPhone 6 s more! I know how you want to finish the installation process and start to use your new iPhone. Let us ensure that we discussed a few steps that can help your situation.

  Restore my device from a backup to iCloud takes a long time

  Restoring a backup can take time because of the size of the backup or the speed of Wi - Fi network. For example, iCloud may take about 1 to 4 hours per gigabyte during a restore process.

  There are several steps that follow:

  • In iOS 8 or later, check the status of the transfer on your device under settings > iCloud > Backup. If the restore process is in progress, the backup setting is gray.
  • Make sure that your device is connected to the Internet with reliable WiFi.
  • Make sure that your device is plugged into a power outlet.
  • Check the Apple progress bar that is displayed during the transfer of a backup.

  If you need help, restore your device from a backup to iCloud

  Thank you for using communities Support from Apple.

• How do I know what process should run in the background of a HP Pavilion a1020n desktop computer

  There are a lot of processes running in the background of my office, and the amount of memory used varies from 0% to 100%.  Seriously, this affects the performance of my pc, especially if I'm trying to run multiple applications at the same time.  Is there a list of the process 'default' which must be running, and if so, where can I find such a list?

  As I do, that's if you close all the programs that you know how to close there should be only 50-60 process depending on the operating system that you do not specify.
  
  From there on, organize the task by using the memory manager. Can google those using memory that you want to disable or learn more about.

• E4200 fundamental Question - how do I know what devices are on the network and get their IP?

  I went through all the controls on Cisco Connect and router advanced settings and have been unable to know what is connected to the network wireless router and address of IP addresses.  Cisco Connect tells me there are 7 devices with and that's it.

  Could someone please point me to a FAQ/Manual explain how to do this?

  Thank you very kindly.

  go to your router configuration page (http://192.168.1.1), then go to the State, and then LAN sub-tab. Click on the button of the DHCP Client Table.

• Windows Media player 11 says I'm missing codex, how do you know what Miss me?

  I have Windows Vista, I am trying to use to use Windows Movie Maker, some of my videos are downloading on the site, and some are not say C:\Users\Momma Kerri\Desktop\Movie 52. mov could not be imported OR I do not have the law codex. Help, please.

  Hello

  Codecs: Frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/codecs-frequently-asked-questions

  All you need is good Codec - get these if 32-bit.

  -Free - CCCP also get free tool of insurgents
  http://CCCP-project.NET/

  FFDSHOW - free
  http://sourceforge.NET/projects/ffdshow/

  Check here:

  Plug-ins for Windows Media Player
  http://www.Microsoft.com/windows/windowsmedia/player/plugins.aspx

  ---------------------------------------

  VLC needs, of no use so usually Codec as a backup when asked to support associations of files just say no.

  VLC - free
  http://www.videolan.org/VLC/

  -------------------------------------------------------------

  If 64 bits and you need codec.

  Read this 1st and go that route, or use the one below. (Vista or Windows 7)

  http://www.Vistax64.com/sound-audio/152850-Vista-codec-pack-32bit-64bit-Media-Player-codecs.html

  --------------------------------------------------------------------

  If 64-bit - can run WMP in 32 or 64 bit mode.

  Or try these: download - SAVE - go to the place where your put them RIGHT CLICK – RUN AS ADMIN.

  For 32-bit use these - OR the 32 bit ones listed above which I prefer.

  K - Lite Codec Pack 8.0.8 (or newer)
  http://www.codecguide.com/

  Use them for 64-bit:

  K - Lite Codec Pack 5.5.0 (64-bit) (or newer)
  http://www.codecguide.com/

  -------------------------------------------------------------

  You know that you use WMP 32 or 64

  Change, modify or value 64-bit Windows Media Player 11 (WMP11) in Windows Vista x 64 as default (or WMP12 - Windows7)
  http://www.mydigitallife.info/2007/01/19/switch-change-or-set-64-bit-Windows-Media-Player-11-WMP11-in-Windows-Vista-x64-as-default/

  -------------------------------------------------------------

  And you can use it when necessary because no codex is usually required.

  VideoLAN - VLC media player
  http://www.videolan.org/

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• How can I see what programs are running

  My CPU is working hard on something - but I did all running programs I know. How can I control what my CPU?

  Right click on the taskbar and select taskmanager

• How can you know what charger completed?

  I am loading a bunch of SWF files in my movie, and when they finished loading I need to change each color of sovereign wealth funds based on my xml data. My problem is when my Event.COMPLETE off I do not know what charger, it belongs to retrieve the correct XML. I tried to give the names of my Chargers but I can't access the Event.Complete function name. My trace causes the error: the property name not found on flash.display.LoaderInfo and there is no default value. How to access my charger name?

  for (var w3:int = 0; w3 < cartXML...) Item.length (); W3 ++) {}
  
  var thumbLoader:Loader = new Loader();
  thumbLoader.name = String (w3);
  thumbLoader.contentLoaderInfo.addEventListener (Event.COMPLETE,
  {function(e:Event):void}
  thumbCount ++;
  trace (e.Target.Name);
  If {("setSkinColor" in e.currentTarget.content)
  Object (e.currentTarget.content) .setSkinColor (bought. @bodyColor, 255);
  }
  else {}
  e.currentTarget.content.setData (255,255).
  }
  thumbArray.push (e.currentTarget);
  If (thumbCount is cartXML... {Item.length ()}
  fillDataProvider();
  }
  });
  var thumbURL:URLRequest = new URLRequest (this. Path access + cartXML... Item [W3] .source);
  thumbLoader.load (thumbURL);
  }

  The target of the event is the contentLoaderInfo.  So if you want to find the name of the shipper, you should be able to use: e.target.loader.name