How does the DAQ hardware with data acquisition?

Similar Questions

• do you need a power supply to the current entry with data acquisition or 9265

  Hello I just receive the NI 9265 Daq for research in my lab. I'm trying to present entry and display it on an oscilloscope. I don't get anything. I did some research on the internet, so my question is do you need a power supply to the current entry with data acquisition or 9265?

  Read the data sheet.  Clearly on the first page is a sentence which reads "the NI 9265 requires 9 V to 36 V external power.

• How does the work in AS3 data formatting?

  In some of my older languages, I could convert various types of data in a well-formatted string.

  For example «!» x (20)"would be uppercase the first letter of the string.

  "$> > >, > > 9.99 would give me $1.23.

  (999) 999-9999 converting an integer or a string in a beautiful phone number research

  etc, etc.

  How did this kind of thing better done in AS 3?

  Also, is there a way to feed these masks to the text input controls so that (for example) a telephone number can be entered one already visible (de)-

  Thaks,

  VC

  The default controls are not hidden input, but some third-party controls

  do.

  There is a formatting help in StringFormatter and StringUtil

• Re: How does the data retention?

  Hello guys

  How does the conservation of data in vC Ops? In the document it says data retention in the company is 900 days. But in the vSphere user interface, we can keep up to 4 years, which is by default and the minimum level. These two does not?

  There are also resolutions different weeks, monthly, quarterly, and annual. Suppose for example that if we maintain weekly resolution as 12 weeks and months 10, all the quarters 9 and annual 5 years as shown in the picture how it works? I mean after 12 weeks the data will be deleted, but we said 5 years for recall information. How this is achieved.

  Please help me

  Thank you

  VK

  Let me be more specific:

  1. the colelctor collects data interval 20 seconds every 5 min

  2. it is wrapped in a 5 min avg and max value.

  3. these values 5 min is rolled up to hourly, daily, weekly... ect... for two reasons: capacity and analysis of dynamic thresholds which is stored in two databases diffenent calculations.

  It does not compress the stats... it gets stats avg. (Analysis uses avg to get trends used for forcasting ability... ect)

• How to use the TRUNC function with dates in the expression builder in OBIEE.

  Hello
  How to use the TRUNC function with dates in the expression builder in OBIEE.
  TRUNC (SYSDATE, 'MM') returns 1 July 2010"where sysdate is July 15, 2010 ' in SQL. I need to use the same in the expression builder in the logical layer mdb column.
  
  
  Thanks in advance

  Use it instead:
  TIMESTAMPADD (SQL_TSI_DAY, (DAYOFMONTH (CURRENT_DATE) *-1) + 1, CURRENT_DATE)

• How to run a window of data acquisition and another pane at the same time

  Hello

  I have a main window for data acquisition and in front panel there are four Sub Vi. When the main window of data acquisition is running and at the same time if I run the Subvi - main window stops data acquisition and the secondary window starts to run. But I want to launch the window of acquisition of primary data and the pane at the same time. Please give me a solution for this...

  Thanking in advance.

  Nikhil

  Hi Nikhil,

  My explanation has answered your question. Take a look at the image as an attachment. Let us know if you have any other questions.

• We can connect the output of the sensor directly to the DAQ hardware or any interface necessary?

  We can connect the output of the sensor directly to the DAQ hardware or any interface necessary? If so wat kinda necessary interface?

  How to change the sensor output to match entry-level data acquisition?

  If the sensor output beyond daq range is provided. What are its effects? pls answer

  -It depends on your signal and the type of device you have. Your DAQ provides a package of signals? Also, what type of signal you want to measure? You must select DAQ that matches that. Take a look at the following before you start:

  Getting started with NO-DAQmx: Main Page

  And take a look at table 1 in the following article to wire your signal to the right:

  Wiring and considerations of noise for analog signals

  -You will need to use external circuitory to match the input of data acquisition range.

  -You could damage the unit.

  If you have any other questions, please after return. And, don't forget to give more details about your configuration, the hardware and what you're trying to do.

• How does the virtual machine BACK to Windows?

  How does the NTVDM?  I run an old DOS program written in Fortran 77, which, with the exception of the database has not changed in 20 years.  It takes about 2 hours to start a business.  My boss told me that I can get a better computer.  Upgrading my computer 3 GB RAM maximum 4 GB will make a difference.  When I use the MEM command, I thought that the memory in use is what I take BACK used, approximately 1 MB.  Am I missing something?  More RAM can help?  Help a different CPU architecture?   The little knowledge by going to various sites, I have gained seems to tell me that dual core or quad processors are unnecessary because BACK is a single processor and use it exclusively.  How about a faster chip.  Is there a limit to the speed that is finished on the BACK.  Then addresses NTVDM maybe all these problems Unlike DOS itself.

  Thanks for your help

  Hello

  Your question better asked during the Forum of Microsoft virtualization, for more specialized assistance on this issue, please repost your request here:

  http://www.Microsoft.com/virtualization/en/us/community.aspx

  Kind regards
  Manasa P - Microsoft Support

   

• How does the trash?

  OT: Trash.

  How does the trash?

  It seems to be a "sandbox", but a reference to the storage space on each disk.

  I can't find a real situation for the trash

  If I delete a file from the c: drive or the drive e: is the deleted file stored in a different location or the renamed file right on the disc it came? (don't forget the BACK a deleted.doc file was just renamed $eleted.doc)

  Thank you

  In Windows 7, the trash is a named hidden system folder $Recycle.Bin.  There is a file with that name in the root of each of your partitions (e.g., C:\$Recycle.bin, D:\$Recycle.bin, etc.).  Within each of these folders are folders for each user in use on the machine account (there may be additional folders).

  When you double-click on the icon to the trash that is displayed on your desktop that opens is a composite of all files $Recycle.bin for the user account that is active.  In other words, you see the files you deleted all partitions of disk, but you will not see the deleted files of another user of your computer.

  If you right-click on the Recycle Bin icon, you can configure the space used for the $Recycle.Bin records on each partition.  The default size appears in about 10 percent of the first 40 GB on the size of the partition more than 5% of the balance.  As a general rule, you should leave the default size.

  See http://www.csee.umbc.edu/courses/undergraduate/FYS102D/Recycle.Bin.Forensics.for.Windows7.and.Windows.Vista.pdf for more details than you probably want to

• How does the online Flash Player Settings Manager?

  That's one thing, I've always been curious to know: How does the Flash Player Settings Manager ?

  It's a UI SWF running in a regular reader of Flash, but there obviously access to all kinds of Flash Player settings low level, a typical SWF is not.

  My first guess is that the user interface is in fact built into Flash Player, but then why would you go to visit a website to see? The SWF file is actually be served by the site Web and Flash Player's trust to the Web site to access a low level player not made public API?

  As a Flash developer for many years I've just been curious about this for a long time. Now that the Manager is obsolete by the construction in the settings (which is a lot less mysterious) Manager, I thought I would ask before it is completely forgotten.

  -Aaron

  Yes, the SWF is imbued with special powers, which are linked to the domain that sovereign wealth funds are served from.  The settings are basically just special LSO.

• How does the Vswitch?

  Hello

  Suppose we have an Esxi host with 2 physical network card and a virtual machine running on it. without grouping of NETWORK cards NIC is chosen to forward traffic outside the Esxi?

  and I want to know in this scenario, how does the Vswitch? It sends the mac address-based frame? Let's say that the two network adapters is connected to the same switch.

  Thank you.

  If you don't want to use the pool (for some reason any) then creating vSwitches with only a single uplink or create multiple groups of ports on a vSwitch with multiple uplinks and override the order of failover on each port group to set vmnic active, standby and unused.

  André

• How does the BC and calculate shipping UPS?

  How does the BC and calculate shipping UPS? How does he know how many widgets can fit in a box or if a widget is big enough to carry by itself?

  Some of our products are shipping at the right price, and others are far away.

  Are "Product Dimensions" dimensions of the box or widget?

  Thanks for any help.

  Everything is located in one single box no matter how big it is, BC and then calculates a volumetric size of the products, the problem, it's long and thin elements do not get calculated very well and lead to prices being unacceptable for certain types of orders.

  Second question, dimensions of the product should be the size of the box and not the size of the product (for the calculation of delivery somewhat correctly).

  I said that a short time before it can be overcome, but you must calculate your shipment with a 3rd party and then inject in order before ordering, it is out of the box solution, hopefully some new funky BC liquid options come along and fix everything.

• How does the remote collector?

  I'm not clear on the role of remote collector.

  How does the remote collector? He interviews / transmits data to the internal manifold? What is the flow of data?

  Thank you

  -isayani

  Isayani,

  It was stated earlier in this thread - a case of primary use for the remote collector is to collect metrics to an environment that is separated by a logical or physical network complexity.  For example, a demilitarized zone where you want to just open a minimum of connections internally or to a remote location where you have limited network connectivity and wishes to consolidate the collections to save bandwidth.

  You can also choose to add another collector if your vC Ops server is of limited resources.  However, based on the environment of size that you used in your example, there is no advantage and only an additional complexity of having several collectors.

• The charge would be created with the unique package with date id

  Hi all
  
  Thanks in advance,
  
  IAM new to ODI, in my process I dnt know below two constaraints how to do, please help me in this regard...
  
  1. the load would be created with the id of a single lot with the date and
  stamp under the unique number (when the load data from source to target).
  2. HIGHLAND field would have the line number incremented from
  .001 when records are inserted in the table

  30021986 wrote:
  Hello

  Thanks for the reply, my requirement is,
  1.i have field JELN in the target table, in that line number is incremented from de.001 in the table. (Field JELN would have the incremented number line from de.001 when the rows are inserted in the table)

  -> for what I had done using sequenceing odi_sequence craeating, but it will give higher error.
  and the second condition is

  Never use ODI sequence unless you do business with a technology that has no native sequence is
  (eg files). Most of the RDBMS has their own sequence, and you use these alone.
  For oracle, you must use . NEXTVAL in the field mapping. Be sure to run on the target.

  2. when iam loading the data from the source to target a unique batch number must be generated with the date and time stamp (the load would be created with the unique package with date id and + *)
  timestamp in the unique number +) *.

  You can use SYSTIMESTAMP in this area and do not forget to run on the target.

• How does the licensing of user/activation/cloud system affect me?

  With the old system to buy and use, upgrade when you can afford , the license has been clear that you could install 2 copies of the software on different machines, offering only 1 has been used both.

  How does the cloud with activation and users now?

  I am a 1-man-band design agency and would like to be able to work on my main desktop machine, while in office, but also on my laptop when out and about. Can elaborate you on how the cloud will work in my scenario? I hope that "Insert here a deity" it because otherwise I just put myself out of mobile business! Laughing out loud

  Also every time a machine dies horribly, it does from time to time, how the cloud will deal with a new installation on a new computer - will I have old TELEPHONE painful activation of a guy trying to figure out why I installed the number of copies 3 or he as magically remember me and my preferences and make something as done steam? See below for users of steam:

  With systems simlilar and steam (for games), you can log into your account and download and use the software on any machine (provide your connection) and any platform (mac, pc, ps3) which is a brilliant choice. You cannot dodge the system either because the minute you "login" elsewhere, the other account is essentially disabled. I could travel in Australia, using my friends Mac and 20 minutes to continue playing a game at home, I was playing in the United Kingdom on a PC. I have no fear of him using the account that I don't tell him how to connect and do not save my details. As soon as I connect to the House once again, his machine is disconnected and disabled even if I left it on. Its simple, but it works brilliantly. It records the cloud or individual preferences preferences too (in case say, its screen is a lower resolution, etc.)

  That's how works the creative cloud - if he shouldn't! IDEA...

  I have a mac and PC at work - how bright would it be to have only 1 subscription on any platform (if only I stick to the 1 user at the right time)

  If the user login is crucial, I could use any machine or platform at any time - cloud of real work, real cross-platform.

  The licensing Creative Cloud membership is more less the same as before, all computers (Windows or Mac).

  If you had a system that crashed, and that you do not clear, what happens when you go to install on a new computer is it would give you an option to 'disable all' (there is a new option). After that, you can reactivate just on two computers, you want it again.

  The software does not support mobile licenses, you can always turn off using the help > "disable" feature. Being able to license on different machines based on a mobile log-in is something that others have suggested as well (good idea), but is not currently supported.

  You can install on your Mac and PC, however, the subscription is not platform specific.

  -Dave