How fast is the RAM on my Veriton VX275-UD5800W?

Need to add 2 GB of DDR3 extra RAM to my computer, but need to know what speed is for compatibility reasons.  I do not have the manual for this computer.  Any information would be very appreciated.

Hello
Plug the RAM: DDR3 800/1066 MHz SDRAM

Tags: Acer Desktops

Similar Questions

  • HP laptop - 15-ac121dx: how to access the ram on a 15-ac121dx modules

    I want to upgrade the ram in my HP laptop - 15-ac121dx and maybe the hard drive, but I can't understand how to access the ram. There is no access panel, and unlike some other models, it doesn't have a single lever in the battery bay to remove the cover.

    OK, I realized how down low on the laptop.  After watching some youtube videos I came across another HP laptop computer who had screws under the rubber feet and of course there are also screws under the back of two rubber feet, can't believe I didn't think to look under them.

    To get the background you need to:

    1. Remove all the screws on the bottom.  (Must be 12 total)
    2. Remove the drive from DVD (Yes it does not).
    3. Finally, carefully separate the case around the side.

    After that, you should have full access to the slots of RAM and hard drive.

  • Qosmio F30-125 - how to upgrade the RAM?

    Hello

    I have a model PQF30E Qosmio and who seek to increase the RAM.

    I read that this model can take 2 GB max as opposed to the PQF32E which can take 4 GB.

    I have the standard 512 MB installed at the moment and when I open the back I have only a slot for expansion. Should I put a 2 GB upgrade in this slot I can not find a 1.5 GB upgrade or is it possible to delete the original 512 and replace with2 x 1 or 1 x 2 GB.

    Thank you
    Ben

    Hi mate

    What boarder said is right.
    The user manual provides information on the possible RAM upgrade and there is also an instruction how to put the RAM in the slots.
    Usually it s not difficult and can be done very quickly.

    View just the words to the subject of the upgrade of RAM max;
    It's material and limited to Intel chipset limitation.
    If you want to know how much RAM is possible then check your type of chipset and visit Intel for chipset details.
    In the datasheet, you can find the specifications of the chipset.

  • Upgrade of RAM i7 540 how fast can the processor actually use

    I just got a 540 and I want to know how fast RAM i7 processor is able to use to my advantage. The BIOS can deal with setting parameters at a higher speed of RAM?

    Second question, the system tolerates 1.3V RAM?

    Standards JEDEC and Intel Haswell only supports 1600 MHz CL11 at 1.35v

    You can install RAM more fast (probably up to 1866 MHz depending on availability), but it might speed up to 1600 MHz.

    Note that faster RAM installation also slightly increases the temperature of the CPU.

    Don't lose sleep on it, you hardly notice the difference anyway.

    Before I forget, do not install any RAM with a voltage higher than 1.35v.

  • Tecra A10 - how to change the RAM?

    Hello

    I was wondering I just bought a new Toshiba Tecra A10, I just wondered how the change of the RAM, it comes with 1 GB of Ram I want upgraded to 2 GB or 4 GB.

    The RAM slots are located at the rear of the Machine or below the keyboard?

    Any help will be appreciated.

    Thank you.

    Hello

    Memory module compartment is placed at the bottom of the unit.
    You can remove the screw clean the lid in plastic and then you will be able to remove this cover and access locations of memory.

    AFAIK, you can upgrade the memory for max 8GB (2 x 4 GB), but it's not necessary you can upgrade to 4 GB RAM and it is more than enough

    Welcome them

  • Satellite Pro A10 - how to upgrade the RAM?

    How I'm sure that when I go buy the memory that it adapts to the motherboard. ?
    Sorry for my bad English

    Is it enough to know that its DDR motherboard?

    Hi kichenin

    Until you buy new RAM modules, you should check out what specifications you need and how much memory is taken in charge.

    I checked the specs on the Web from Toshiba site and your laptop supports up to 1 GB of RAM. The specification for the RAM is PC2100 DDR - RAM. You can also buy some RAM with higher specifications (PC2700 or PC3200), but they will operate at the speed of the PC2100.

    Recommend brand for Kingston memory for example.

  • Re: How to change the RAM for internal video on the Satellite A665-S5060 card?

    Hello

    My question is how can I change the RAM for my internal video card? I found I only 64 and I want to change it to 256.

    I don't want no heavy games, I just want to change to 256.
    I tried to change it by accessing the BIOS, but I had no luck with it, no option for this, another way, I could do?

    Thank you!.

    Hello

    > my question is how can I change the RAM for my internal video card? I found I only 64 and I want to change it to 256.

    No, you can not do it yourself. The system will automatically change to the need for more ram.

  • Satellite L300 PSLB8E - how to increase the ram clock speed

    I have a laptop which is equipped with 2 slots for ram PC2-6400
    1 - Samsung module M4 70T5663QZ3-CF7 [800 MHz] 2GB
    2 - Samsung module M4 70T2864QZ3-CF7 [800 MHz] 1 GB
    GPU: Intel GM45
    Processor: Intel Core 2 Duo T5870 Mobile @ 2000 MHz
    According to the manufacturer, this kit allows you to work with the 667/800 MHz memory speed, but the problem is that reference programs show the actual frequency of the ram at 399 MHz.

    Question No. 1:
    (a) why not clock the memory works in 800 MHz but only 399 MHz,
    (b) how to change to a 800 MHz

    Question No. 2:
    I'm going to buy a processor
    Penryn Core 2 Duo T9600 processor (1066 MHz FSB) (2.80 G) Hz or T9400 (2.53 G)
    and install it in the computer
    and increase the memory of 2 x 4 GB 800 MHz (8 GB)

    I explained that this possibility is provided for by the manufacturer according to the Maintenance Manual for:
    Toshiba computer
    Satellite L300/L305
    Satellite Pro L300
    EQUIUM L300
    SATEGO L300
    (PSLB8x/PSLB9x)
    (PSLBAx / PSLBBx)

    If this operation will help to improve system performance

    I put t know what programs you use and if it is good or not if this info can be good and perhaps not. I put t know. The fact is that you n t have one any influence on the functionality of memory and I doubt that you can do something and change some values.

    Exact specification for laptop laptop does not for me but I think that Satellite L300 must have Intel GM45 chipset and I presume that for your motherboard FSB is 667 MHz. You can improve up to 8 GB and compatible 4 GB RAM module has PA3670U-1M4G part number.

    Upgrade CPU on Satellite L300? I put t know man. A friend of mine has this model of laptop and I don t know if it's the right decision to spend money to upgrade this old model of laptop budget.
    http://APS2.toshiba-tro.de/KB0/TSB9401AX0001R01.htm

  • How to release the ram of the reserve of equipment...

    I have installed 12gigs and usable only 1.99, the rest is reserved for the haredware... intel core i7 950, 460scc, 3 x 1 TB wd hdisk gtx sli... I added more ram and the machine comes to give more to the material how to fix this problem... because my machine is the use of the ram 100% after 2 hours... Thanks if you can help

    So why win7 see ram and even return to the system monitoring software, if it is unable to use it?

    This make absolutely zero since there must be away to cancel the allocation of the resources...

    It's almost a moot point. A 32 bit OS has a 4 GB limit to the amount of memory space, it can address. If these addresses are occupied by the RAM or material, the same addresses cannot be used for different things at the same time. All memory addresses beyond 4 GB are inaccessible, so the hardware addresses of the computer are reserved in the 4 GB limit not on. The excess memory beyond 4 GB is not allocated what whatsoever.

    I have a 64 bit OS. Installed memory is 6 GB, reserved hardware is 9 MB, the rest is all usable RAM. The video card has 1 GB on this issue and does not appear in the stats.

  • How to increase the RAM?

    I want to increase my RAM of 2 GB at least 8 GB. But I don't want to buy new RAM. So, please tell me if I can use my HDD, which is 250 GB to increase my RAM to improve performance. Please see that it is 100% working and its effect can be seen. RAM information should change in the properties of the computer. I have a lot of free space in my hard drive.

    Is not possible. Your hard drive is already filling the memory by the swap file, but there is no way to make it as fast as RAM.

    Even if you replace your hard drive with a disk of type SSD, file access would be faster and the computer seems to be faster, but would not yet close to the speed of the RAM modules...

  • How to increase the RAM memory on a virtual computer.

    Hello!!!

    My 4.1 infrastructure

    vCenter Cluster with 4 ESXi host

    I installed a VM with OS Linux Centos 5.5

    VM has 2CPU, 2G_RAM, 7_GHD

    I want to increase the RAM up to 4 G.

    I have increase up to 4 GB with vSphere. But when I run MV, I run commands such as 'free' or 'top' and I discover who recognize only 3 GB

    But here:

    http://KB.VMware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 1014006

    This behavior is expected and does affect adversely the operation of the guest. Physical address extension (PAE) will not allow the guest to recognize all 4 GB of memory.

    Does anyone know how to increase?

    Thank you very much.

    JOs.e

    As you may know, 32 bit OS' are limited less than 4 GB of RAM, unless the EAP is enabled, and it will impact your server when it starts to use on 3GBs of RAM.

    I suggest that using a 64 bit OS, this way you can throw all the RAM you want in it.

    Anyway check this: http://www.cyberciti.biz/tips/redhat-enterprise-linux-4gb-plus-ram-support.html

    If you finish by activation of EAP, make sure you only take a snapshot of the VM as VM/backup.

  • How you upgrade the RAM on Mac mini (end of 2014)

    The Support page says it is not accessible, but everything is assembled (without guarantee) just to write this post in Safari with open iTunes I am hitting 3.3 4.0 GB.

    I've always liked Apple since the first iPod came out, but I didn't know that their computers were also disposable.

    I guess I should know better when the price is only a little higher then the Apple TV, I went to buy, but it's the first Apple computer, I buy, and it's better than my Apple TV ver1 who died.

    So when I cut it open I find accommodation from the PIN and what chip will take the 1.4 GHz, 4 to 8 GB machine.

    I guess there is only one slot (pinout) and it is probably welded in.

    No, they were serious

    the RAM is welded in there. You can not remove it.

  • How to release the RAM without an application

    release the RAM without using an app? OX El Capital has a feature or not to release the RAM?

    RAM is handled automatically by OSX.  He will try to use as much RAM as possible at all times to make very effective treatment.  When we look at the ActivityMonitor > graphics memory, the only statistic worrying is "memory pressure.  If a green bar in bass of the graph is displayed, all is well.  I have fht where filled to the top with red, the pressure is too high and you have any questions.

    "Cleaner" third-party applications tend to do more harm than good, if they * all * good at all.

  • How to remove the ram of an end 2013 27 "iMac

    Hi guys.

    I sell my end 2013 27 "iMac.

    However, I keep my ram upgrade and handing the original of ram in it. I upgraded to 32 GB (4 x 8). It was easy to install to install the RAM, but now I'm trying to remove it, it is simply not possible with 4 banks filled. I am anyway not possible to enter her with my fingers to get it out. Any suggestions?

    https://www.iFixit.com/Guide/iMac+Intel+27-inch+EMC+2639+RAM+replacement/20249

  • M420 blades - how to maximize the RAM?

    I have 6 of them in production now and have undergone a DIMM failure so far.  I am looking to buy 4 more with maximum RAM (192G).

    Using the online Configurator which tells me:

    M420 blade supports a maximum of 3 DIMMS with a processor or six 6 DIMMS with two processors.

    In order to get the 192 GB using the simple option provided by the website (16 GB DIMMS) I need 12, but the M420 contains only 6 DIMM slots.  What magic to cram 12sticks 6 slots?

    Or is the maximum of 196G just a lie?

    I test on the DELL CHAT to see if I can get a response.

    08:00:23    System
    Connected with Treona Phillips

    Treona tells me that there is a DIMM 32 GB option that does not appear in the configurator.   Why?  Are not the DIMM 32 G bars in stock?

    Treona says she doesn't know why the part does not appear, but she could quote it.  OK, so this is.  I use an active agent to get this maximum configuration of the RAM.

Maybe you are looking for

  • My screen has changed and text boxes suddenly around all topics and elements of the screen?

    Weak black lines/boxes suddenly appear and now all the texts and the major portions of the screen are surrounded by lines. My guess is that it's a setting either FF or Microsoft. If so I have not found. HG

  • When you try to go to Gmail, the tab does not open and said only: "loading."

    For the last three days, whenever I try to go to Gmail, tab Firefox says "loading" and does not open gmail. Gmail works fine on Internet Explorer on my laptop so I know that's not Gmail. No error, it just keeps trying to load for as long I let the op

  • Windows 7, problem driver ethernet... seriously need help!

    Hi my names chris & My problem is that Windows 7 will not update my drivers ethernet and coprocessor. I do not have the cd that came with the office, and I don't know the name of the ethernet inbuild manufacturer. so I can't find the driver. It is a

  • ASA SSL VPN problem with 8.2 (2)

    Hello everyone, I have a couple of ASA 5520 image 8.2 (1) running in active failover mode / standby. A few months ago, I downloaded the 8.2 (2) on the cisco website and charge to the ASA.After loading the new image, they called me for problemsfunctio

  • Is Lightroom 2015.3 Lightroom version 6 or 5?

    I had huge problems with the latest version of Lightroom (crashes whenever I open or downloaded pictures), so I went back to version 2015.3. I want to make sure that this version is compatible with the Canon 7 d Mark he's that works only with Lightro