How get/set the value of the DataObject object in the task of the API?

Similar Questions

• How to set the value of a variable in a cluster in LabVIEW to c#?

  Hi guys, I'm working on a small c# program, which by using the interface provided by LabVIEW.  And I know that, with the help of lv. SetControlValue (name, value) can set a variable just on the front panel. But in my case, there are several groups on the front panel. Then it confused me how to set the variables in these groups. For example, there is a cluster named clusterA and a variable named a., I tried something like this:

  lv.SetControlValue("clusterA.valueA",1);
  

  but it totally inoperable. Everyone has some experience with this sort of thing? Thank you very much!!

  Hey guys, thanks a lot for all your response. I just found a simple way to solve this problem. For example, there is a cluster named "ClusterA", and there are only two witnesses, who are: an int value named "IntA" (default = 10 IntA value) and a string value named "StringA" (by default the StringA = 'abc'). In c#, if you call the method:

  var clusterA is vi (Array). GetControlValue ("ClusterA");

  you will get a table looks like: clusterA = {10, 'abc'}; So if you want to change IntA 123, you simply do:

  clusterA.SetValue (123, 0); 123 the value, 0 is the index of IntA in clusterA, after this clusterA table = {123, 'abc'}

  After that, simply to make the table in LabVIEW using:

  VI. SetControlValue ("ClusterA", clusterA);

  and now you see the LabVIEW, IntA is changed.

• How to set the number of unit and its maximum value in RDMS

  Hello

  I am trying to add RDM vsphere sdk using the code to return the controller below key and the unitNumber:

  public static int[] getFreeDevice (VirtualMachine vMachine, String deviceName) { }

  VirtualDevice [] vDevice = vMachine.getConfig () .getHardware () .getDevice ();

  System.out.println ("DPS->" + dps.length);

  int [retVal] = new int[2];

  for (VirtualDevice vd: vDevice) { }

  if (vd instanceof VirtualSCSIController) { }

  Vscsic = (VirtualSCSIController) vd VirtualSCSIController;

  retVal [0] = vscsic.getKey ();

  retVal [1] = vscsic.getDevice ().

  length +1 ;

  if (retVal [1] == 7)

  retVal [1] = retVal [1] + 1;

  return retVal;

  }

  }

  return null;

  }

  can someone tell me please:

  1 how to get units available, for example for example: 0-15

  2. how to get/set the limit (15)

  3. how to do ROW when the unitNumber reached 15

  4. how to ROW with the next value as SCSI1:0, after reached SCSI0:15

  Thanks in advance.

  Rohit

  Hello

  have you tried manually in your environment in order to add the new controller scsi as "scsi controller 1" for VM? First, try manually, then make sure that the scsi controller option is allow to add a scsi controller more for VM.

  And in your code

  scsiCtrl.setBusNumber (0); I think that the scsi controller 0 is already set. This is so it will be like this scsiCtrl.setBusNumber (1);

  scsiCtrl.setControllerKey (1000); This line will not come because after you add the scsi controller, it will generate key controller. It is not depends on user option

  Apart from that, I think that some description and label is not necessary.

  Thank you

• How to set the value of a field from the LOV of another field.

  I'm trying to figure out how to set the value of a field (P_PROGRAM) to the value of another field of based lov (P_STATE).
  
  The P_PROGRAM field is a hidden field. The P_STATE field is a required field and is based on a list of values for the State Codes.
  
  When a user selects the State to P_STATE, the field of the P_PROGRAM should be set to this value, as well.
  
  I tried different ways to get there via a function call on the post for the calculation of the field P_STATE, defining the source P_PROGRAM to the value of the page item P_STATE put varialbles, creating a process before SENDING, and they all still come back as having a NULL value for P_PROGRAM, therefore impossible to create the file in the db as the PROGRAM is a mandatory field in the table.
  
  Can you please help? Thank you, Laura

  Laura,

  It is always helpful if you provide information about the Apex version you are using. The Apex 4 you can use Dynamic Actions to achieve this. In earlier versions is possible using processes to submit or javacsripts, as well.

  Heres how you do in 3.x with treatment to submit, to make it work in 4.0 as well.

  1 do the P_STATE ' select list submits the Page.
  2. Add a calculation on the point P_PROGRAM, or write to him assign a value based on a process. The treatment should be OnLoad after the header
  3. If the page does not have an unconditional branch that loops on itself, add a. NOTE: The direction must be the last branch (larger sequence number) and should have checked "Save Session State".

  This is what will happen
  a. when the State is selected Page will be submitted
  (b) it will take the unconditional branch to himself and save the value of P_STATE
  c. the calculation process / fills the value of the P_PROGRAM element when the page reloads

  Kind regards

• How to set the default value of the attribute with a sequence number? Is it possible to add a string to seq.no. like abc0001?

  Mr President.

  How to set the default value of the attribute with a sequence number? Is it possible to add a string to seq.no. like abc0001?

  Concerning

  For the date, you can use groovy expression adf.currentDate to set the current date. reference http://adfgouravtkiet.blogspot.in/2012/11/how-to-set-default-values-for-entity.html

  You already have ways to use the sequence.

  How do you add a new value in the form. You're creating a new line of your page (user interface) and by engaging with validation operation? Unless you commit you will not be able to see anything in the table.

  Thank you

• How to set the initial value programmatically in af:selectOneChoice

  Hi all

  How to set the initial value programmatically in af:selectOneChoice

  filled with view object instance, but I want to show the value initial programmactically

  This can help you: Re: how to set the default value of the component selectOneChoice in ADF

  and the default af:selectOneChoice programmatically from backing bean

• How to set the value of QUERY using PL/SQL process?

  Hello
  
  I use APEX 4.2...
  How to set the value of the REQUEST using process of PL/SQL which lies before the header - where the value of the REQUEST should appear on the URL?
  
  Kind regards
  Fateh

  You cannot set a value of demand in a PL/SQL block. You can run a PL/SQL block on a request which is the id of a button for example.

  Denes Kubicek
  -------------------------------------------------------------------
  http://deneskubicek.blogspot.com/
  http://www.Apress.com/9781430235125
  http://Apex.Oracle.com/pls/Apex/f?p=31517:1
  http://www.Amazon.de/Oracle-Apex-XE-Praxis/DP/3826655494
  -------------------------------------------------------------------

• How to set the value of something in a component of the main application?

  Hello
  
  Maybe I've worked on it too long, but I can't understand how to set the value of the text property of a text entry field in my main application component in a block of mx:Script. I have a component called Login in the components folder, and I need to set the text value of empNum. In my statement of mxml up there, I said these components such as xmlns = "components.*" so, logically, the property, I'm putting a c.Login.empNum.text. I can't understand the correct syntax to make this work, and I've tried everything I can think of. Does anyone have any suggestions? I think this should be easy, and there is just something missing me.
  
  Thank you!
  Holli

  Have you tried to give him an id?

  If later you can make the loginScreen. empNum.text = "my text".

  Laurent,

• How to set the properties of the EOS in the IVI driver

  I am coding a compatible driver IVI (in LabWindows/CVI) for an old GPIB instrument that does not support the EOI. To read the response device, I need to define the character of the EOS and terminate read on EOS. MAX I can correctly set the properties of communication and communicate with the device, but I do not know how to set these values in my driver. I tried if various attributes (for example with viSetAttribute (io, VI_ATTR_TERMCHAR_EN, VI_TRUE)), but still get errors (I guess I should use the incorrect session handles). How to set these properties inside the device IVI driver properly? These parameters must be active for this specific device only - all other devices on the bus use EDI. So I think that I can not just in the world, set this property on the map.

  Any help is appreciated. Thanks in advance,

  Martin

  To change VISA attributes as parameters EOS via the pilot of the IVI, your application must first acquire the handle valid VISA (VISA session) or the IVisaSession interface. The first is applied when the uses of pilot IVI VISA - C API and the latest is applied to when the IVI driver uses VISA COM API. Session handle of the IVI - C (that was returned by the function _init() ) is * NO * a VISA manage so you cannot call the API C VISA with the session handle.

  I don't know if the IVI driver you are using has such a property or attribute allowing to access the handle VISA or IVisaSession interface, but for example, driver Agilent IVI COM "IO" property, which returns the reference to IVisaSession or any good VISA com interface.

  Makoto

• How to set the timeout of read when using channelReader.ReadWaveform?

  I'm using a USB-6210/a. data acquisition, and it works fine until I have to take a longer than 10 s waveform.

  When I take a longer than wave form, I get the error 200284, "some or all of the requested samples are not yet acquired.  To wait for the samples become available use longer read timeout... »

  No problem, I thought, I'll just put a longer period.  I searched through the documentation, and the timeout only I found was the watchdog timeout.  When I wanted a longer value, I get code 200452 State - specific property is not supported by the device or is not applicable to the task.

  I use the code in the example AcqVoltageSamples_IntClk.2008 .net with c# in Visual Studio 2008, .net 3.5 sp1.

  How to set the timeout so that ReadWaveform() is not the time?

  Here is the code:

  privateAnalogMultiChannelReaderchannelReader;

  privateAnalogWaveform awf;

  publicList GetWaveForm()

  {

  Try

  {

  Task getWaveform = newTask();

  getWaveform.AIChannels.CreateVoltageChannel (Channel,"", TerminalConfiguration, RangeMinimum,

  RangeMaximum, AIVoltageUnits.Volts);

  getWaveform.Timing.ConfigureSampleClock ("", SampleRate, SampleClockActiveEdge.Rising,)

  SampleQuantityMode.FiniteSamples, NumSamples);

  getWaveform.Control (TaskAction.Verify);

  channelReader = new AnalogMultiChannelReader (getWaveform.Stream);

  AnalogWaveformdata = channelReader.ReadWaveform (NumSamples);

  AWF = data [0];

  samples As new List();

  for (inti = 0; i)

  returnsamples;

  }

  catch (DaqExceptionexception)

  {

  MessageBox.Show (exception. (Message);

  }

  List of l = newList();

  return l;

  }

  Thank you

  Curt

  Hi Curt,.

  Here is a Knowledge Base that can help you to set the timeout setting in your code:

  The property using Timeout of DAQmx task in Visual Studio

• How to set the timeout property Web Service partner link in the new version of the SOA Suite, it is missing

  Hello

  I have a use case in which I'll call synchronous external Web Service and the form of this service, I get the answer after 80 seconds.

  I know that this console form EM soa-infra-> SOA Administration-> BPEL proprieties-> under 'more BPEL Configuration Properties..' in SyncMaxWaitTime can I change the default 45 second in 80 seconds, but it will apply to all synchronous services in this area, and I want only the value appeal of Web Service of particular external reference (link partner).

  For the limit of timeout for the particular web service (partner of external reference link):

  I saw a post at < http://www.mandsconsulting.com/asynchronous-vs-synchronous-bpel-processes > in which there is an option in 'Link partner Edit' form property tab dialog box, we can add "timeout" property but in SOA Suite11.1.1.7 I am not able to find this property form the list.

  on this post < http://abhishek-soablog.blogspot.in/2010/06/timeout-for-partnerlink.html > is also described the same way, but it's just the source code of the highest way of GUI to set the timeout property and it does not work with a new version.

  Can someone please tell me in a new version (11.1.1.7) of SOA suite, which is how to set the timeout for the particular web service (partner of external reference link).

  Thank you

  Can someone please tell me in a new version (11.1.1.7) of SOA suite, which is how to set the timeout for the particular web service (partner of external reference link).

  VR;

  Click em-> composite-> Services and references-> select need to reference and click on-> properties: 'HTTP Timeout of read' and 'HTTP timeout.

  developing composites:

  Click on a reference-> property inspector-> link properties-> plu green and add oracle.webservices.httpConnTimeout with the necessary value and oracle.webservices.httpReadTimeout with the necessary value

  for the same domain defined: oracle.webservices.local.optimization = false

  You can watch

  Administration of Web Services - 11g Release 1 (11.1.1.7)

  How to set a timeout for a Web Service in SOA 11 g (Doc ID 979683.1)

  SOA 11 g: political malpractice not to intercept 'service Endpoint unreachable' error (Doc ID 1503989.1)

• How to set the 1st online number = 10 and increment 10 whenever you press the button to add a new line. Also enable users to enter the generic numbers, IE 13 and still increment of 10 23 or whatever.

  How to set the 1st online number = 10 and increment 10 whenever you press the button to add a new line. Also enable users to enter the generic numbers, IE 13 and still increment of 10 23 or whatever.

  I already have my chart updated in place with a button that will add new lines when pressed.

  Now, I want to clarify that the 1st row is 10 and all the other rows after this increase by 10. It will also allow users to enter any number they want, and the next line will increment of 10.

  Help please.

  Try changing the line button Add the following JavaScript code

  newRow var = Table1._Row1.addInstance)

  If (newRow.index > 0)

  {

  newRow.NumericField1.rawValue = newRow.resolveNode ('Row1 [-1].) NumericField1') .rawValue + 10;

  }

  You need to change this code to match your name on the form, but basically the method addInstance() returns the new row, the newRow.resolveNode ("Row1 [-1]... will get the value of the previous row and then add 10.

  Concerning

  Bruce

• How to set the attribute in the request of adf defalut search form

  I use the default search engine in Jdeveloper 11.1.2.3 with Table query.

  I followed this blog to replace the query by default: https://blogs.oracle.com/jdevotnharvest/entry/how-to_tell_the_viewcriteria_a_user_chose_in_an_afquery_component

  Question is how to set the value of an attribute in the request. The user will add what ever he wants those who are caught queryEvent I want to add to the value of an attribute that is not displayed to the user and the search engine and it is necessary for the application to run correctly.

  Hello

  If you went on the blog that I posted, you could get the ViewCriteriaRow of the queryEvent and then you can add the attribute that you want to the ViewCriteriaRow, and then run the query accordingly.

  
  

  Arun-
  

• How to set the default prompt of dashboard?

  Hello
  In my dashboard prompt, I get values such as:
  
  March 2010
  Apr 2010
  May 2010
  June 2010
  
  How to set the default value for the month in progress (June 2010). I don't want to use "specific value. I want to use the 'SQL result' to populate the default value.
  
  Appreciate your help

  You can use select to_char (trunc (sysdate), 'Mon-YYYY') of the double

  see you soon,
  Vineeth

• How to set the position and size of the façade using the FPRunTimePosRunCustom method in a c# application?

  How to set the position and size of the façade using the FPRunTimePosRunCustom method in a c# application?

  I found a solution! -Set the size and position of the façade with the help of the

  File > VI properties > window running Position (in category list) > custom (in position of menu drop-down).

  then just accept the current position and size (leave the boxes checked) or set values you want directly (uncheck the boxes and fill in the numbers), or physically position and size the façade and use, the "set to current location" button and press "set size" current All that is easier for you.

  OK so it does not make use of the method VI Methods (Active X) FPRunTimePosRunCustom ([Position], [Size]) but if labview want to make him difficult to use then other means must be found.