How GOLD error on terminal with stop button

Please someone tell me how to connect the wire error with / gate. Actually Im trying to stop GOLD button and error status to stop execution of a while loop. Don't know how to get the terminal as boolean error status because it is a cluster and I can't connect directly with door or.

Use the unbundle or unbundle by function "name" in the palette of cluster.

Tags: NI Software

Similar Questions

  • end of time delay with stop button

    I am creating a stop button to control several vi at the same time. One problem is that my Subvi has a period of time. To resolve this problem, the time limit is divided into several times so that I can interrupt it with a stop button. I build out example of Al S on the forums found here. I tried to add a global variable, but it does not work.

    Any ideas? Thank you

    I highly recommend that you take some time and learn how to use the authors of notifications. They are not so difficult to use, and they are far superior to global variables. Dependence on the variables local and global is a good way to end up running in race conditions in your code. Much better usage of the buildings (the declarant for example) which are intended for other parts of your program message.

  • Faced with a problem when writing to a txt file with stop button start

    Hello

    I am trying to use this stop start program that I found while surfing around this great discussion. actually I want to

    to write data to a text file when I press start button and it should stop writing when you press the stop button and

    After that whenever I press the button start again he should invite me for the new file name. now, even if I change the

    name of the file in the path dialog box it gives me error when I try to stop the program by pressing the stop button.

    need help to solve this problem. VI is attached with this post.

    Thank you

    with impatience... Hussn

    Hello Hussain,

    Sorry about that!  A bad tie.

    You can go there.

    Kind regards

  • How always display the date with taskbar buttons activated in widows 8?

    It's got to be average, just to be there. Even using the buttons small taskbar, it is actually enough space to have always the date and stacked. I would be well with them, next to each other also. I don't really understand why the date masks even as it would fit really well. I'm fine with the help of a third party program if necessary. I already have the classic interface installed because microsoft somehow forgot to add the menu start Windows 8.

    There are several strange suggestions and wonderful here for you to play with.  Make sure that you first create a system restore point.

    Windows 7 - display date using small icons
    http://superuser.com/questions/89628/Windows-7-display-date-using-small-icons

    http://www.Google.com.au/search?q=use+small+taskbar+but+have+date+and+time&SourceID=IE7&RLS=com.Microsoft:-to THE: IE-address & ie = & oe = & gws_rd = cr & redir_esc = & ei = 4L7sUaPiKKWSiQe2_IFQ

  • How to make a menu with the button this opening fade?

    I have built a menu animated in AE and had added text that melted by layer layers/buttons > still > create button. Once I have import into Encore through hotlinks I can't connect the buttons in the menu application.  I have added a sample.

    Basically all I want is the feature of game, selection of scene and credits to be selectable after completing discoloration in @ the: 20 mark. I don't want the menu's loop.

    I tried to do a static menu (from the last image in AE) play after that, but there is an a second gap or two before this static menu plays that look just sticky. I tried this in the preview, and it made on a dvd with the same result.

    All the tutorials I've met really does not answer this question either.

    Any help would be appreciated.

    Thank you

    So you're on the right track.

    This departure for a workflow I would try if I did more menus animated.

    http://help.Adobe.com/en_US/encoredvd/4.0/WSA5513911-0AD1-440C-BDAD-2E0E806B425E.html

  • How this error is possible with the simple example of EJB model?

    javax.naming.CommunicationException [root exception is java.net.ConnectException: t3://127.0.0.1:7101: Destination unreachable; nested exception is:]
    java.net.ConnectException: connection refused. No available at destination router]
    at weblogic.jndi.internal.ExceptionTranslator.toNamingException(ExceptionTranslator.java:40)
    at weblogic.jndi.WLInitialContextFactoryDelegate.toNamingException(WLInitialContextFactoryDelegate.java:783)
    at weblogic.jndi.WLInitialContextFactoryDelegate.getInitialContext(WLInitialContextFactoryDelegate.java:367)
    at weblogic.jndi.Environment.getContext(Environment.java:315)
    at weblogic.jndi.Environment.getContext(Environment.java:285)
    at weblogic.jndi.WLInitialContextFactory.getInitialContext(WLInitialContextFactory.java:117)
    at javax.naming.spi.NamingManager.getInitialContext(NamingManager.java:667)
    at javax.naming.InitialContext.getDefaultInitCtx(InitialContext.java:288)
    at javax.naming.InitialContext.init(InitialContext.java:223)
    to javax.naming.InitialContext. < init > (InitialContext.java:197)
    at test.client.SessionEJBRemoteClient.getInitialContext(SessionEJBRemoteClient.java:259)
    at test.client.SessionEJBRemoteClient.main(SessionEJBRemoteClient.java:34)
    Caused by: java.net.ConnectException: t3://127.0.0.1:7101: Destination unreachable; nested exception is:
    java.net.ConnectException: connection refused. No router available at destination
    at weblogic.rjvm.RJVMFinder.findOrCreateInternal(RJVMFinder.java:216)
    at weblogic.rjvm.RJVMFinder.findOrCreate(RJVMFinder.java:170)
    at weblogic.rjvm.ServerURL.findOrCreateRJVM(ServerURL.java:153)
    at weblogic.jndi.WLInitialContextFactoryDelegate.getInitialContext(WLInitialContextFactoryDelegate.java:352)
    ... 9 more
    Caused by: java.rmi.ConnectException: Destination unreachable; nested exception is:
    java.net.ConnectException: connection refused. No router available at destination
    at weblogic.rjvm.ConnectionManager.bootstrap(ConnectionManager.java:464)
    at weblogic.rjvm.ConnectionManager.bootstrap(ConnectionManager.java:315)
    at weblogic.rjvm.RJVMManager.findOrCreateRemoteInternal(RJVMManager.java:251)
    at weblogic.rjvm.RJVMManager.findOrCreate(RJVMManager.java:194)
    at weblogic.rjvm.RJVMFinder.findOrCreateRemoteServer(RJVMFinder.java:238)
    at weblogic.rjvm.RJVMFinder.findOrCreateInternal(RJVMFinder.java:200)
    ... 12 more
    Process has finished with exit code 0.
    ------------------------------

    can someone guide me on the resolution of this error? I do this oracle example:
    http://www.Oracle.com/technology/OBE/obe11jdev/ps1/EJB/EJB.html

    Thank you

    Vael

    You must add the MySQL library on the integrated WebLogic Server.
    See last step here:
    http://jobinesh.blogspot.com/2009/06/ADF-with-MySQL.html

  • A VI with two stop buttons

    I have a single VI which shows the two stop on the front panel buttons. My scheme is quite simple with 2 while loops and the other for loop. Whence the second stop button? Why is the second button here? How can I remove the second stop button?

    Brijesh says:

    Hello

    When you put two while loop. Stop button automatically two will come.

    Not always true. It all depends on what part of the palette that you select while a loop from. I can't, however, don't forget the name of the part of the pallet where it automatically to the stop button. There are also better ways to stop the parallel loops as the queues or the authors of the notifications if you have more than 2. Or, the action engines (I always throw this to save Ben from having to post!)

  • Satellite A210 - how to use the muldimedia with other than Media Player buttons

    Hello

    is it really not possible to use media keys (Play, Pause, FF) on top of my laptop for an application other than Windows Media Player?
    Is there a reason for this? I would like to control Winamp with this button.

    It seems quite sensless to restrict access to a SINGLE application of HUNDREDS available, a then it is the multimedia player that is not used by most people.

    I have the Satellite A210 Notbook.

    Can you tell my how to control my winamp with these buttons?

    Greetings from Robert

    Hello, Robert

    Unfortunately, there is no solution at the moment. If you check this forum, you will find several very interesting discussions on the multimedia buttons and Winamp player. The fact is that some people have found the solution for older models of laptops running Windows XP Home edition. Winamp has offered the plugin must be installed.

    We now have the new situation. Your laptop is running latest Vista OS and I didn t find any plugin that can help. Problem is that your laptop is designed for Windows Vista preinstalled OS contains all the necessary plugins for Windows media player running under the operating system preinstalled.

    Is any kind of restriction. With preinstalled operating system you can do what you want and if you can find a way to change it for that. You know very well that there are hundreds of different players in the market. You can't wait for Toshiba take a time and create a plugins for each other and satisfy customers around the world.

  • How to create a stop button to send commands via the serial port and finish labview vi?

    I want to send two commands on my camera, the first to stop the execution and the second to get out of the remote control mode. This is done on RS232. What I want is a way to put this in my existing VI that tells the device to run. Now if I stop the program, that the devices just run the last command unless I have stop manually. How can I set up a stop button that are not sent to all orders except in such a hurry? I tried the structure of the case, but didn't know how to put a part of 'status quo' If island stops in the while loop is not pressed the button.


  • Blue screen with STOP: 0x0000007E (0xc0000005, 0 x 00000066, 0xba4dbc40, 0xba4db93c)

    How to fix blue screen with STOP: 0x0000007E (0xc0000005, 0 x 00000066, 0xba4dbc40, 0xba4db93c)

    These accidents were caused by the corruption of memory (probably a driver).  Run these two tests to check your memory and find which driver is causing the problem.

    If you are overclocking reset all default before running these tests.
    In other words STOP!

    1 - Memtest.

    * Download a copy of Memtest86 and burn the ISO to a CD using Iso Recorder or another ISO burning program. "http://www.memtest.org/#downiso"] Memtest86 + - Advanced Memory Diagnostic tool

    * Boot from the CD and let it run at least 5 or 6 passes.

    Remember, anytime Memtest reports errors, it can be bad RAM or a bad motherboard slot.

    Test the sticks individually and if you find a good, test it in all slots.

    Any error is indicative of a memory problem.

    If a well-known stick fails in a slot of motherboard, it's probably the slot.

    http://www.SevenForums.com/tutorials/105647-RAM-test-Memtest86.html

    2. Driver Verifier

    Using Driver Verifier is a dubious proposition. Most of the time it will crash and it will tell you what is the driver. But sometimes it will crash and will not tell you the driver. Sometimes it will crash until you can connect to Windows. If you can't mode without failure, then you will have to resort to editing the registry offline to disable driver verifier.

    I suggest that you first back up your data and make sure you have access to another computer so you can contact us in case of problems. Then do a system restore point (so you can restore the system using the functionality of Vista/Win7 Startup Repair).

    In Windows 7, you can do a startup repair disk by clicking Start... All programs... Maintenance... Create a system - with Windows Vista repair disc, you need to use your drive installation or from the "Repair your computer" option at the top of the Safe Mode menu.

    So, here is the procedure:
    -Go to start and type "auditor" (without the quotes) and press enter
    -Select 'Create a custom settings (for code developers)' and click 'Next '.
    -Select "Select individual settings from the list complete" and click "Next".
    -Select the entire document except for "Low resource Simulation" and click "next".
    -Select "Select driver names from a list", then click "next".
    Select all drivers that are NOT provided by Microsoft, and then click "Next".
    -On the next page, select "Finish".

    Restart the system and wait as he crashed to blue screen. Continue to use your system normally and if you know what are the causes of the crash, do it several times. The objective here is to get the system crash because Driver Verifier is stressing out the drivers. If it is not planted for you, then let it run for at least 36 hours of continuous operation (an estimate on my part).

    If you are unable to Windows because it crashes too early, try safe mode.
    If you can't mode without fail, try to use the system from the installation DVD restore to bring the system back to the previous point of restoration that you created.
    http://www.SevenForums.com/tutorials/101379-Driver-Verifier-enable-disable.html

    Further reading
    "http://support.microsoft.com/kb/244617"] using Driver Verifier to identify issues with Windows drivers for users advanced

  • How to stop and restart a .vi with a button front?

    Hey guys, a newbie here.

    I have a .vi with a stacked sequence. First frames are few parameters (LIN master node) and initialization of hardware and hardware data should pass on (the frame response table). In the next section, there is a loop in which the data of sends and receives material (LIN monitor). If I want to change the initialization, settings, or data values, I need to stop the .vi and restart it. I was wondering if there is a simple way to do this with a single click (a button on the front panel).

    An alternative would be to put another loop outiside all stacked sequence, then run it once with a push of a button (the inner loop should leave the reboot on the outside), is it possible?

    I hope I made any sense. Thanks for your suggestions.

    Tomaz

    Ideally, redo the code with a state machine would be the best way to go, if this is so you can add this powerful tool to your Toolbox. That being said, wrapping your existing code in a while work loop, with its own stop button to stop the program, if the execution of the entire sequence is ok. Where you might encounter problems with this, is if there is a step in the sequence that should not be run again, there should be the encapsulation of code from the image of this sequence in a case statement that only runs the first time through. If you have the time, learn how to use a state machine would be a real advantage, really take your LabVIEW knowledge to the next step, if you pardon the pun.

  • HOW CAN I FIX A SCREEN BLUE, WITH STOP ERROR CODE: 0X0000007E (0XC0000005, 0X89F24OAE, 0X8A953BA0, 0X8A95389C)

    HOW CAN I FIX A SCREEN BLUE, WITH STOP ERROR CODE: 0X0000007E (0XC0000005, 0X89F24OAE, 0X8A953BA0, 0X8A95389C)

    Hello

    Please do not type in capital letters because it's difficult to read and considered to be shouting.

    ---------------------------------------------------------------------------------------------------

    Check this thread for more information using BlueScreenView, MyEventViewer and other methods
    to troubleshoot the BlueScreens - top 3 responses (+ 1 other).

    http://social.answers.Microsoft.com/forums/en-us/vistarepair/thread/3deab2fa-4000-4136-8c78-a3d22b1db009

    We can analyze the minidumps if make you it available to the SkyDrive or another file
    sharing sites.

    ZIP or download the content of the C:\Windows\minidump

    Use SkyDrive download collected files and after shot/screenshot.
    http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

    -------------------------------------------------------------------------

    Also this, so you can see the probable bluescreens.

    Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
    (also Windows 7)
    http://www.winvistatips.com/disable-automatic-restart-T84.html

    ===========================================================

    The system has RAID? If so, it's also very suspicious.

    This error is usually a driver problem and display adapter (video) driver is the most suspicious if she
    may be others. Antivirus/antispyware/security programs, equipment (heat) and major software problems
    can also cause the error. When you get to the section of the driver to use the Troubleshoot utility my generic
    methods in the next message and then return to the if necessary troubleshooting tool.

    Have you recently added hardware or drivers updated? Don't forget to look in Control Panel - Windows
    Updates to see if all drivers have been updated it. Other donor opportunities include the antivirus/anti-
    spyware/security programs.

    When you get to the pilot and sections of the memory of the troubleshooter check the following message to
    update drivers and memory test and then return to the troubleshooter if necessary.

    BCCode: 7F 0x0000007E which is also 0x1000007E

    Cause

    SYSTEM_THREAD_EXCEPTION_NOT_HANDLED bug control is a very common bug control. TO
    interpret, you must identify which exception has been generated.

    Common exception codes are:

    • 0xc0000005: STATUS_ACCESS_VIOLATION indicates a memory access violation has occurred.

    For a complete list of exception codes, see the Ntstatus.h file located in theinc directory
    the Microsoft Windows Driver Kit (WDK).

    Solve the problem

    If you do not have to debug this problem, you must use certain basic troubleshooting techniques.

    • Make sure you have enough disk space.
    • If a driver is identified in the bug check message, disable the driver or check with the
    • Reference of the manufacturer for driver updates.
    • Try changing video cards.
    • Check with your hardware vendor for updates to the BIOS.
    • Disable the BIOS memory options such as implementing caching or shading.

    If you plan to debug this problem, you may find it difficult to get a stack trace. Parameter 2
    (the address of the exception) must identify the driver or function that caused the problem.

    If the exception code 0 x 80000003 occurs, a hard-coded breakpoint or assertion was hit, but the system
    has been launched with the /nodebug. switch. This problem should occur infrequently. If it occurs repeatedly,
    Make sure that a kernel debugger is connected and the system is booted with the Switch/DEBUG .

    In case of exception code 0 x 80000002, the trap frame provides additional information.

    If you do not know the specific cause of the exception, consider the following questions:

    • Hardware incompatibility. Make sure all new hardware that is installed is listed in the
    • List of Microsoft Windows Marketplace tested products.
    • Service driver or defective peripheral system. A service driver or defective peripheral system can be
    • responsible for this error. Hardware problems, such as the incompatibilities of the BIOS, memory, conflicts
    • and IRQ conflicts can also generate this error.

    If a driver is listed by name in the bug check message, disable or remove that driver. Disable
    or remove drivers or services that have been recently added. If the error occurs during startup
    sequence and the system partition is formatted with the NTFS file system, you may be able to use safe
    Mode to rename or to delete the faulty driver. If the driver is used as part of the system startup procedure
    in Safe Mode, you must start the computer by using the Recovery Console to access the file.

    If the problem is associated with Win32k.sys, the source of the error may be a third remote
    control program. If this software is installed, you can remove the boot of the computer service
    by using the Recovery Console, and then by removing the offending system service file.

    Check the system log in Event Viewer for additional error messages that might help identify the
    device or the driver that generated the bug check 0x7E.

    You can also disable memory cache BIOS may try to resolve the error. You should also
    Run the diagnostics of material, especially the scanner memory, which provides the manufacturer of the system.
    For more information about these procedures, see the manual of your computer.

    The error that generates this message may occur after the first reboot during Windows Setup, or
    Once the installation is complete. A possible cause of the error is lack of disk space for installation and system
    BIOS incompatibilities. For problems during the installation of Windows that are associated with the absence of disc
    space, reduce the number of files on the disk drive hard target. Find and delete any temporary
    the files that you do not have to have files hidden Internet, backup application and.chkfiles files that
    contain fragments of file saved to disk scans. You can also use another hard drive with more drive
    free space for the installation. You can solve the problems of BIOS by upgrading the version of the system BIOS.

    BCCode: 7F 0x00000007E who is also a 0x1000007E<-- read="" this="">
    * 1141.html? order = votes http://www.faultwire.com/solutions-fatal_error/System-thread-exception-not-HANDLED-0x0000007E-

    ----------------------------------------------------------------------------------------------------------------------

    Look in the Event Viewer to see if something is reported on those.
    http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

    MyEventViewer - free - a simple alternative in the standard event viewer
    Windows. TIP - Options - Advanced filter allows you to see a time rather
    of the entire file.
    http://www.NirSoft.NET/utils/my_event_viewer.html

    Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
    info that would help. Such as ITC and 4 others entered at the bottom left. And all others
    error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

    As examples:

    BCCode: 116
    BCP1: 87BC9510
    BCP2: 8C013D80
    BCP3: 00000000
    BCP4: 00000002

    or in this format:

    Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
    Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

    It is an excellent tool for displaying the blue screen error information

    BlueScreenView scans all your minidump files created during ' blue screen of the.
    death ' crashes and displays information about all accidents of a table.
    Free
    http://www.NirSoft.NET/utils/blue_screen_view.html

    BlueScreens many are caused by drivers of old or damaged, in particular the video drivers
    However, there are other causes.

    You can do mode if necessary safe or the Vista DVD command prompt or
    Options recovery if your system is installed by the manufacturer.

    This tells you how to access the System Recovery Options and/or a Vista DVD
    http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

    You can try a system restore to a point before the problem started when one exists.

    How to make a Vista system restore
    http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

    -------------------------------------------------------------------------

    Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
    RUN AS ADMIN

    Enter this at the command prompt - sfc/scannow

    How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe)
    program generates in Windows Vista cbs.log
    http://support.Microsoft.com/kb/928228

    The log can give you the answer if there is a corrupted driver. (Does not work
    tell all possible driver issues).

    Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

    How to run the check disk at startup in Vista
    http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

    -------------------------------------------------------------------------

    Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
    keyboard and mouse, as well as of other major device drivers.

    Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
    http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

    How to install a device driver in Vista Device Manager
    http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

    How to disable automatic driver Installation in Windows Vista - drivers
    http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
    http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

    -------------------------------------------------------------------------

    How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
    quit unexpectedly
    http://support.Microsoft.com/kb/958233

    Troubleshooting, STOP error blue screen Vista
    http://www.chicagotech.NET/Vista/vistabluescreen.htm

    Understanding and decoding BSOD (blue screen of death) Messages
    http://www.Taranfx.com/blog/?p=692

    Windows - troubleshooting blue screen errors
    http://KB.wisc.edu/page.php?id=7033

    -------------------------------------------------------------------------

    In some cases, it may be necessary.

    The Options or Vista recovery disk Startup Repair

    How to do a startup repair
    http://www.Vistax64.com/tutorials/91467-startup-repair.html

    This tells you how to access the System Recovery Options and/or a Vista DVD
    http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

  • Error in the system falls down with STOP 0X0000008E

    My crashes system with Stop error 0X0000008E who it is and how I can fix the problems... Thnx for any advice

    Stop error 0X0000008E (0XC0000005, 0XBF2CF595, 0XA2ED7BA4, 0x00000000)

    igxpdx32. DLL-address BF2CF595 base at Bfl86000, DateStamp 00000000

    Beginning physical memory dump

    Total physical memory dump.

    Without more information, we can only speculate...

    If this happens whenever you watch a video, it's a good clue that the problem could be in your audio or video configuration, then you should start looking there.  Then, if you make adjustments, you can check your known failure scenario (watching a video) and see if the problem is resolved.

    These are the same questions I ask everyone who has a BSOD problem:

    Please provide additional information on your system, and we have all this and much more.
    What is your system brand and model?
    What is your Version of XP and the Service Pack?
    Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..
    The question was preceded by a loss of power, aborted reboot or abnormal termination?  (this includes the plug pulling, buttons power, remove the battery, etc.)
    The afflicted system has a CD/DVD drive work?
    You have a true bootable XP installation CD (it is not the same as any recovery CD provided with your system)?
    Your system seems to start OK and then crash or didn't he start not at all?
    If your system works fine, what do you think might have changed since the last time it worked correctly?
    Can you make the system crash when you want
    ?  For example, you would say that there is no specific system activity that coincides with the accidents (like watching videos, playing games, etc.).
    The next time your system crashes, provide more information on what you see.
    Here's a BSOD example showing information you provide:
    Send for the nose and the Red arrows (3 to 4 lines total).
    Send all * line STOP message since there are clues in the 4 parameters.
    If there is a name of the file listed in the STOP message, don't forget to include this information too.
    Ignore the boring text unless it seems important to you.  We know what a BSOD looks like, we need to know what your BSOD looks like.
    Now provide more information about your system and data against more recent accidents.
    Click Start, run and enter in the box:
    Msinfo32
    Click on OK and when the system info summary appears, click on Edition, select all, copy, and then paste the information here.
    For information about video drivers, expand components, click view, click on edit, select all, copy and then paste the information here.

    For information about the audio drivers, expand components, click Sound Device, click on edit, select all, copy and then paste the information here.

    There will be some personal information (such as the user name and the name of the system), and anything that turns information private for you, simply delete the pasted information.
    This will minimize back Q & A and eliminate guesswork.
    Download BlueScreenView here:
    Unzip it and run it (BSV installs nothing) and let him complete the digitization of all your crash dump files.
    If you double-click on depressed, you will get information on it (including the field caused by the driver) and you should be able to spot the problem right away - especially if you see a model in landfills where Caused by field pilot is the same (beginning with this driver).
    Select (highlight) one or more of the most recent dump files by clicking on them and hold down the CTRL key to select multiple files.  Try to select only the most recent links that relate to your problem (perhaps five or six to start dump files).
    Click on file, save selected items and save information from the dumps to a text file on your desktop called BSOD.txt
    .  Open BSOD.txt with a text editor, copy the text and paste it in your next reply.
    Here's an example of report ASB to a single BSOD I initiated on purpose that indicates the cause of the accident as the pilot i8042prt.sys belonging to Microsoft Corporation:
    ==================================================
    Dump file: Mini062110 - 01.dmp
    Crash time: 21/06/2010-11:51:31
    Bug Check String: MANUALLY_INITIATED_CRASH
    Bug check code: 0x000000e2
    Parameter 1: 0x00000000
    Parameter 2: 0x00000000
    Parameter 3: 0x00000000
    Parameter 4: 0x00000000
    Caused by the driver: i8042prt.sys
    Caused by the address: i8042prt.sys + 27fb
    Description of the file: i8042 Port driver
    Product name: Microsoft® Windows® Operating System
    Company: Microsoft Corporation
    File version: 5.1.2600.5512 (xpsp.080413 - 2108)
    Processor: 32-bit
    Computer name:
    Full path: C:\WINDOWS\minidump\Mini062110-01.dmp
    ==================================================
    Send the information of the last 5 memory dumps (if you don't have 5 memory dumps yet, send the newest, you have).
    While you wait, please follow these steps:
    Perform scans for malware, and then fix any problems:
    Download, install, update and do a full scan with these free malware detection programs:
    Malwarebytes (MMFA): http://malwarebytes.org/
    SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
    They can be uninstalled later if you wish.
    Restart your computer and solve the outstanding issues.

  • How can I customize the navigation bar in Firefox 29? I wish I had the back refresh/stop button in front of the navigation bar!

    How can I customize the navigation bar in Firefox 29? I wish I had the back refresh/stop button in front of the navigation bar!

    One of the developers has been around the forum recently try to answer some of these questions then I quote the developer

    For the entire quote and useful links for corrections and explanations please see

    Each setting you see in a computer program you use requires work; when a developer wants to build something new or improve something, he or she has to go through each related (hidden) setting and test if it still works like before and do that on each platform Firefox runs on. That's Apple's Mac OSX, various flavours of Linux and various flavours of Windows, including Windows XP. This costs time, lots of it, and that amount grows exponentially with each setting that's added. This comes on top of our work to continuously fix, improve and innovate Firefox.

  • Stop the loops with a button

    I have an infinite loop is and display of data. How can I end the loop with a button or a keypress?

    Periodically perform a ProcessSystemEvents() call inside the loop. In a reminder of the STOP button, set a flag to indicate your loop to stop.

    stop unsigned int = 0;

    While (! stop) {}

    data getmeasured

    display the data

    ProcessSytemEvents()

    Sleep (250);   to be polite: it is impolite to spinlock, since you will monopolize the CPU and other threads can get hungry

    }

    then, in the reminder for a STOP button

    STOP the button callback routine

    stop = 1;

Maybe you are looking for