Similar Questions

• HP Officejet 5740: after that 10 updated iOS, cannot print from the iPad

  Hello

  I've updated my iPad to iOS 10.1.1 2 Air.  I can't print remotely.  It runs from my other devices (phone, Macbook Air) Apple which have not been updated to iOS 10.  I use AiO Remote.  The iPad recognizes the printer and the IP address is correct.  I was able to print from my iPad yesterday until I updated.

  I appreciate your help.

  Hi @AllanAAB,

  Welcome to the HP Forums!

  I came across your post where you are unable to print from the iPad after iOS update. I would like to help.

  Please refer to this article http://hp.care/2bSjSnW , he explains how to use AirPrint and also troubleshooting steps to solve the problems with it.

  Recommend that you remove the printer from the iPad, and then reconnect the printer on the iPad. (Display settings and select Wi - Fi, if the printer is listed, click on the i on the right side of the printer that there are listed and select forget this network/printer.) And reconnect the printer)

  Restart the router, printer, and iPad. I'm sure you could have already tried this.

  Also, look for the printer firmware updates (if applicable, on www.hp.com/drivers) and also check if there are other updates released by Apple via iTunes.

  Remove the HP all-in - One Printer remote app on the iPad and reinstall it.

  Let me know if this helped.

• Windows 7 Edition Home Premium. After that windows update will in a reboot loop

  Windows 7 Edition Home Premium. After that windows update KB982926 & KB982670, will in a reboot loop, 64 bit, Dell Studio XPS. I used F8 & restore to burst. Tried the update again with the same results. Silverlight & Net Framework updates

  Hi pbmass,

  I want to clarify if you are able to start the computer on the desktop after the system restore.

  Follow the steps mentioned below and then try to install the updates manually

  Step 1: Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps mentioned in the link below:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Step 2: Run the fixit available in the link below to reset windows update components.

   

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

   

  Step 3: Disable the security software; Follow the steps mentioned in the link below

  Disable antivirus software

  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  Important: Activate security software once everything is done.

  Step 4: Download the update manually and then install them

  The .NET Framework 4 Client Profile is available on Windows Update

  http://support.Microsoft.com/kb/982670

  Description of the update for Silverlight:

  http://support.Microsoft.com/kb/982926

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Problems of updates Windows XP - how to fix the incorrect Windows XP updates KB2633952 keep asking to install?

  Problems of updates Windows XP - how to fix the incorrect Windows XP updates KB2633952 keep asking to install? True, it is that it is already installed on your computer. If hide us, an another previous KB2570791 arises in our updates of Windows and asked to install anything, that it was installed... of the questions repeated and very annoying.  Help, please!

  (Microsoft Answers just sent us message have deleted our previous thread, ask for help!) We are simply not that these problems are problems with Windows XP updates related to DST or not?)

  Nadia. PA supporter said that your computer is hacked. He may be right. I can't weigh because I don't know what led him to this conclusion. If your computer is hijacked, then you should address that more that you need to fix this minor update. However, under the resolution of your problem to update, you can try this:

  Assume Windows XP

  Check the C:\Windows\System32\ directory for the presence of the file tzchange.exe

  If the file is not present or if the version of the file is not 5.1.2600.6171 or newer...

  Download the update appropriate 2633952 for your platform here:

  http://support.Microsoft.com/kb/2633952

  Run with - extract switch (e.g., Start > run > "[path to the downloaded file] \WindowsXP-KB2633952-x86-ENU.exe"-x)

  Of course, replace [path to the downloaded file] with the path to the downloaded file.

  Citations may or may not be required depending on the path. Place the x - out the citations if you use them.

  Choose a location for the extracted files (a new folder is recommended)

  Locate the extracted files. File tzchange.exe you want and copy it into C:\windows\System32

  That rerun Windows Update detection to see if the problem is resolved.

• After that 16 updates have been installed (most important) now my computer is running slowly and stalls, takes to always load anything... What is going on?

  I had 16 updats that microsoft said was important... OK update all now my computer runs very slow and short freezes... was working fine until it updates?

  Hi Valerie Krueger,

  Welcome to the Microsoft community. Looks like that after that the updates have been installed, the computer is running slowly. I'll help you with this problem.

  1. What is the brand and model of the computer?

  2. what security software is installed on the computer?

  Method 1.

  Difficulty of Windows system performance slow computer problems: http://support.microsoft.com/mats/slow_windows_performance/en-us

  Method 2.

  How to make a computer faster: 6 ways to speed up your PC: http://www.microsoft.com/atwork/maintenance/speed.aspx#fbid=ke2GRxcvRz-

  Slow PC? Optimize your computer for maximum performance: http://www.microsoft.com/athome/setup/optimize.aspx#fbid=p871fE9bGeH

  Important: while performing the check disk on the hard disk, if bad sectors can be found, then check disk will try to repair this sector. All the data available in this area may be lost.

  Warning: him reset Internet Explorer settings feature might reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.

  Warning of Security Scanner: there could be a loss of data while performing an analysis using the Microsoft safety scanner to eliminate viruses as appropriate.

  I hope this helps.

• My HP Photosmart C309g-m printer will not print after that automatic updates have been made last night.

  My HP Photosmart C309g-m printer will not print after that automatic updates have been made last night.

  What can I do?

  Printer in Windows problems: http://windows.microsoft.com/en-us/windows/help/printer-problems-in-windows

• After that Windows update restarted as requested, by getting only now white screen

  After that Windows update restarted as requested, by getting only now white screen.

  Unable to set up windows

  I was able to boot in safe mode and restore that updated windows.  Then found that the monitor is released.  Again, everything is good

• fixing older XP that needs updating. Error Msg 0 x 80245003. cannot access windows update.

  fixing older XP that needs updating. Error Msg 0 x 80245003. cannot access windows update. Help!

  Microsoft fix it wants tool return me to windows update to download some updates IT must first which is no help...

  Hello

  1. Open command prompt.
  2. type net stop wuauserv, and then press ENTER.
  3. Type rmdir /s %windir%\softwaredistribution\wuredir and press enter
  4 type net start wuauserv, and then press ENTER.
  5. try to install the updates again.

• Cannot connect LiveView after that I updated. :(

  I just installed SUS for reasons other than the update of LiveView. I saw that they had an update for the LiveView, so I tried the update. The update process went smooth and well. However, after that the update and I lit my LiveView, it can no longer connect on my Xperia Active. I've never updated the LiveView since it came with my belt and no I'm regretting that I did.

  Can someone help me?

  The upper left on the LiveView LED continues to flash red and green while the screen looks like this:

  

  I use the LiveView daily as my wrist watch and I'm pretty mad at myself for even thinking to update.

  OK so I would check.

  1.) on your bluetooth settings click on detectable peripheral make and start pairing again.

  (2.) your liveview and liveware applications are up to date? try to clear the application data. Settings > apps > manage apps > Search tap apps on clear data.

  3.) you already odd devices? try to clear the data of Bluetooth even above procedure.

  4.) try to re update your camera liveview.

• Can't make a HD video, after that I updated the product? and there is that a message says it can't encode video and will have to change the settings to try again!

  Can't make a HD video, after that I updated the product? and there is that a message says it can't encode video and will have to change the settings to try again!

  jilll

  What version of Premiere Elements you use, what computer operating system?

  What would you update... have you had 12 and 12.1 updated or have you 13 and 13.1 updated? Or did you upgrade may 14 from a previous version?

  Where are you in the settings for your version where you get the message saying you cannot encode the video and you may need to change export settings?

  What is your planned export?

  Please explain, give more details.

  I will review your wire in the morning morning look to follow so that I can help you succeed in your Premiere Elements project.

  RTA

• a few waves in my monitor working with the premier cc... my VGA Nvidia GTX 650 card. How to fix it.  drivers are updated.

  a few waves in my monitor working with the premier cc... my VGA Nvidia GTX 650 card. How to fix it.  drivers are updated.

  a few waves in my monitor working with the premier cc... my VGA Nvidia GTX 650 card. How to fix it.

• Hello after that I downloaded IOS 10 my watch to lose control of my Iphone and he couldn't reconnet. What should I do? Can anyone help?

  Hello after that I downloaded IOS 10 my watch to lose control of my Iphone and he couldn't reconnet. What should I do? Can anyone help?

  Hello

  The following steps may help:

  • Restart your iPhone and your watch, both turn off together, and then restart your iPhone first:
    • Restart your iPhone, iPad or iPod touch - Apple Support
    • Restart your Apple Watch - Apple Support
  • Disable the twinning and re - pair your watch:
    • The app shows on your iPhone takes a backup of your watch automatically when the disparity with the app choose to restore from backup during the whole upward. Most of the data and settings will be restored, with a few exceptions (for example cards Pay Apple, access code).
    • Cancel the twinning of your iPhone - Apple and Apple Watch Support
    • Set up your Apple Watch - Apple Support

• CPU ankles 95-99% stuck on svchost.exe after that Windows update Nov 12 patches to not install

  Automatic update of Windows was put on 'On' on the morning of November 13, 2013, when I received the notice of Microsoft system tray that updates of Windows patches were ready to be installed on my computer (XP sp3, IE8, MSE).

  Updates proceeds to installation with the updated bars before the normal close.

  Updates is apparently blocked at the first update. I let it run for about 15 minutes before I made a hard stop. I thought that maybe I had lost to the Internet because the update seemed stuck on the first and took too much time, it seemed.

  Next start, computer slows almost stopped after a few minutes.

  Guilty is svchost.exe SYSTEM alternating between 95 and 99% of my system resources. I turn it off and computer returned to normal.

  Has done research on the web, stop automatic updates and processor svchost problem disappeared, unless I went to Microsoft updates and svchost.exe Web page re - would seem to consume almost all of the CPU resources while bars update Microsoft constantly scanned my system for the latest upgrades necessary.

  Spending a day to try various fixes posted on the internet. A Microsoft Fixit said that he there had errors in the update and fixed all but one saying registration number was bad (said he couldn't fix that). Despite everything, still the same problem.

  On the same day, an error was unable to update the definitions of virus on MSE, but for some reason, the next day (14) updated crossed.

  Update: some progress: I leave svchost cogitate on the webpage update from Ms. After about 1/2 hour, the updated hotfix list showed. I tried to install it, but not updates managed to install. I am currently re - try, as suggested on the Web page.

  Also tried the command "net stop" method mentioned in several places, as a tool of Malewarebytes Anti-Root running. Nothing.

  Tried the fix for IE8 security as suggested, nothing.

  Tried system restore, but I must have something wrongly configured with it because it was not able to restore any earlier date, I took. Bad luck.

  Never had a big problem with my set-up in all the years I've been running XP sp3, until now.

  Next thing I'll try is Park on the side of Windows Update for an hour or two, with the idea that maybe my processor is in need of more time to digest something.

  I see that others have had this problem, but not necessarily with patch release on November 12.

  UPDATE: some progress, perhaps. 1/2 hour parked page update of Windows, with SVChost churning away, and I got a list of patches. I tried to install, but all of them failed to install. I try a re - install, as suggested.

  Let me propose a summary of how to fix the MSE / Windows Update problem and the svchost problem:

  1st thing to do is to disable the automatic updates window. This will keep your computer against svchost.exe freeze for now.

  2nd, follow the instructions in Xircal to check that you have "BITS" listed in your list of "services". Correct it if not.

  3rd, IE remove it from your list of programs, and then reinstall it, making your first update of the IE rollup, as suggested previously.

  That he "should" do and you can activate the automatic updates on svchost.exe should return to normal. Proceed with the update of Windows and MSE as usual.

• Satellite L25 - after that Windows update is unable to use the Wi - Fi button

  I have a S-1193 Satellite L25, caught a virus, and after a windows update, cannot use wi - fi on the front button.

  What I have to do is disable the adapter, turn it on, then re-boot.
  If I turned off the computer, I di everything again.

  This will make the button work? Or is there a setting that is always on?

  Hello

  > after a windows update, cannot use wi - fi on the front button
  Do you mean the button that launches Internet Explorer?

  According to your message the laptop doesn't connect to the WLan automatically and you will need to connect it manual to get the job of WLan.
  Is this right?

  I put t know how you have connected the laptop to your router, but usually, if you own Windows WLan zero configuration then you should make sure that the parameters to a called + connect when this network is in range. +

  Welcome them

• No option to print duplex/two-face, after that I updated and updated my laptop

  I have windows 8. My laptop was not working properly so I decided to "regenerate" and update in the process. After the update, I tried to print a document from Microsoft word and printing set up for my printer was different and it didn't show me the double-sided printing option / duplex. ): How to fix this? I want to save paper. Thank you.

  You will need to go to the website of society of printer and download the printer driver for your printer.  Without this driver, only the "naked basic functions" will work.