How is it, my contribution for translation is only visible when I am logged in?

Similar Questions

• How to use transfer windows for xp to xp. When I plug usb computers are delivered to the top with the same screen and when I try to use the transfer to the new computer, it just said information gathering and sits for hours

  How to use transfer windows for xp to xp.  When I plug usb computers are delivered to the top with the same screen and when I try to use the transfer to the new computer, it just said information gathering and sits for hours

  Hello, welcome.

  The process is automatic and the maximum transfer rate should be about 20 GB/HR. If the process crashes during that long of a time, it's probably because of something internal rather something you're doing wrong.
  For reference purposes, I included this link. It goes into the details of the migration from XP to Vista (and the basic steps you follow). The instructions are for migrating to Vista via the network, but you can easily follow the steps and choose a different option for your specific installation.
  http://www.windowsnetworking.com/articles_tutorials/migrating-Vista-using-Windows-easy-transfer.html
  For both machines, I recommend you to prepare for the transfer using the following procedure:
  1. click on START > run

  2 type "msconfig" (without the quotes) and press enter

  3. go to the "Startup" tab and uncheck all the entries displayed

  4. click on 'Apply' at the bottom right

  DO NOT RESTART YOUR COMPUTER AGAIN

  5. click on START > run

  6. Type "cmd" (without the quotes). Right-click on the result at the top of the menu START and select 'run as administrator '.

  7. type chkdsk /r and press enter

  8 allow the system to attempt disassembly of the volume

  9. allow the system to plan restarting

  10. restart your computer

  11 let checkdisk analyze the file system on your hard drive

  12. Once completed, perform the same steps on the other machine

  13. Once completed, repeat the transfer

  
  Let us know what happens

  Thank you!

  Ryan Thieman
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• How can I configure encryption for sending / receiving information, and when I have to do?

  I would like to send and receive encrypted e-mail and other info, but I don't know how to put in place, I am a novice. Any help would be appreciated.

  Firefox send an e-mail, it's strictly a web browser.

  If you use Firefox to access your e-mail, you use "webmail". You must seek assistance from your service provider or a forum for this service.

  If your problem is with Mozilla Thunderbird, check out this forum for support.
  http://www.mozillamessaging.com/en-us/support/
  
  or this one
  
  http://forums.mozillazine.org/viewforum.php?f=39

• How to remove the default for a limited only account gateway (with static ip address)

  I have 1 pc with 4 accounts 1 account administrator and user the rest is limited accounts. I use a static ip address and the question is how to remove the default gateway on these limited account so that they cannot access the internet

  The entry door is fixed to the adapter and selectively cannot set properties of the different adapter for different users, all users use the same adapter.

  With Internet Explorer (does not work with other browsers), you can configure a proxy server with a fake address, you can do this through Group Policy, or you can do it manually for each individual user through the Internet Options settings.  You can set the proxy server address map of loopback (127.0.0.1) or you can set it to a bogus address of your private address range (usually the range 192.168.xxx.xxx)

  If you are using other browsers, you can use NTFS permissions to deny access to the Explorer or the program directory or you can use software restriction policies to deny access to specific programs.

  Alternatively, you can use a logon script to activate the network connection service when you open a session and the other to turn it off when you log, but if you do this you will disable the entire network for limited users if it cannot be a solution for them.  The script can be a simple two-line script:

  Logon script:

  SC config Netman start = demand
  net start netman

  Logoff script:

  net stop netman
  SC config Netman start = disabled

  These can be useful:

  http://www.howtonetworking.com/Internet/restrictie11.htm
  http://www.christianblog.com/blog/abelajohnb/disable-Internet-access-in-Windows-for-specific-user-accounts/

  John

• How to register and pay for Creative Cloud in English when I live in Taiwan

  I live in Taiwan and can not read Chinese (Mandarin).

  When I try to buy the creative cloud it gives me all the info in Chinese,

  How can I get all the pages of the contract and the payment in English pages?

  I tried to change my settings for my region USA and English but it gives me always pages in Chinese.

  Adobe uses a dealer here in Taiwan called "Digital River.

  Any help is very appreciated

  Adobe - Choose your area

  Select a store

• How to create a connection for Toolkit CVI/SQL string when connecting to SQL Server 2008

  I tried to connect to my database of MS SQL Server 2008 for two days using the CVI/SQL Toolbox with no luck.  I use the function of connection BD and I tried a lot of different formats for the connection string with no luck.  I get an error "SQL Server doesn't exist or the access denied" after a long pause, trying to connect.  Anyone know what's the right format for this string?  I even setup of SQL Server on my local machine and I still not able to get the right format for the connection string.

  -Tom

  I have successfully connected to the database, I thank you all for your help.  It was a combination of errors of syntax and configurations that had to be changed.

• How to get a refund for gifts which only allow you to download?

  I gave music itunes as a gift, and they can't download music. He went to a dead link.  I had to give her money to get the music she wanted.

  Click the report a problem of receipt of electronic mail.

• How do I format box for format read-only form fields.

  I am working on a form that has a check box N/A. I want that the checkbox is automatically selected when the form is opened and make the form read-only fields, then make the editable fields when the user disables the check box. The script that I use now is back. It makes editable forms when the n/d is checked and I would do the opposite of this. This is the script that I use now in the section mouse to the top of the box. Any help would be greatly appreciated.

  Script mouse to the top of the box

  getField("Name_2").display = event.target.value = "Off"? Display.Hidden: display.visible;

  getField("Address_4").display = event.target.value = "Off"? Display.Hidden: display.visible;

  getField("City/State/Zip_4").display = event.target.value = "Off"? Display.Hidden: display.visible;

  getField("License_2").display = event.target.value = "Off"? Display.Hidden: display.visible;

  getField("Issued_2").display = event.target.value = "Off"? Display.Hidden: display.visible;

  getField("Exp_5").display = event.target.value = "Off"? Display.Hidden: display.visible;

  getField("DOB_2").display = event.target.value = "Off"? Display.Hidden: display.visible;

  getField("Phone_3").display = event.target.value = "Off"? Display.Hidden: display.visible;

  getField("Email_2").display = event.target.value = "Off"? Display.Hidden: display.visible;

  getField("Payment_2").display = event.target.value = "Off"? Display.Hidden: display.visible;

  getField("Deposit_2").display = event.target.value = "Off"? Display.Hidden: display.visible;

  getField("Exp_6").display = event.target.value = "Off"? Display.Hidden: display.visible;

  getField("Exp_7").display = event.target.value = "Off"? Display.Hidden: display.visible;

  getField("Gift_2").display = event.target.value = "Off"? Display.Hidden: display.visible;

  getField("Cash_2").display = event.target.value = "Off"? Display.Hidden: display.visible;

  getField("Carrier_2").display = event.target.value = "Off"? Display.Hidden: display.visible;

  getField("Policy_2").display = event.target.value = "Off"? Display.Hidden: display.visible;

  getField("Phone_4").display = event.target.value = "Off"? Display.Hidden: display.visible;

  getField("Exp_8").display = event.target.value = "Off"? Display.Hidden: display.visible;

  getField("Signature153").display = event.target.value = "Off"? Display.Hidden: display.visible;

  getField("Print").display = event.target.value = "Off"? Display.Hidden: display.visible;

  getField("Date").display = event.target.value = "Off"? Display.Hidden: display.visible;

  Change all instances of = 'Off' to ! 'Off' = .

• How can I get the Inbox and other folders showing when I open logging

  When I have a message open, I can't see my Inbox and other folders. I need to scroll through the messages at the top until I have find the Inbox. Y at - it a fix for this or is it the new configuration for Mozilla?

  Stop leaving the message tabs opened after reading them.

  To close all tabs, you have now opened right click on one of them, and then select close other tabs. Then use the x to close the last of them.

  Make a habit of close tabs message after reading the or just read the messages in the message pane and do not open the tabs.

• How can I force an 'invisible' object to become "visible" when a numeric value is entered?

  So I try to force an 'invisible' subform to move to 'visible' when a numeric value greater than or equal to 22 entered in a numeric field.

  I can't get the following javascript code to work correctly with any event. I tried change, calculate, validate, events and a few more useless. The only event that sort of works with javascript code that I use is the validate event. When I enter the code in the validateevent, the invisible subform becomes visible when an amount equal to or greater than 22 is entered, but when AN amount is entered in this field, an error message appears that says "failed validation of NumericField4" and the user must click 'Ok' to get rid of the box pop up.

  if (this.rawValue < = 22) { }

  Approval23.Presence = 'hidden';

  }

  if (this.rawValue > = 23) { }

  Approval23.Presence = 'visible';

  }

  Here is a link to my .pdf: http://www.filedropper.com/salgovform

  The field of the object in the javascript code is called: NumericField4 (aka new Grade of employment)

  The subform that I want to become visible when a number greater than 22 entered NumericField4, is called Approval23.

  I founded the javascript code, I used information I have gathered from the following thread and associates .pdf...

  Thread:

  http://forums.Adobe.com/message/1982919

  PDF in thread with javascript code:

  http://forums.Adobe.com/servlet/JiveServlet/download/1981437-8059/Sample_SW.PDF

  I'm sure miss me just a little thing that throws everything off!

  Any help would be GREATLY appreciated.

  Hello

  The following work in the case of output of the digital field, where the language is set to JavaScript:

  if (this.rawValue <= 22) {
       Approval23.presence = "hidden";
  }
  else {
       Approval23.presence = "visible";
  }
  

  Here is your form: https://acrobat.com/#d=3gRNt6WBY2bE0K7en4CnSA

  Hope that helps,

  Niall

• BlackBerry classic help! How to reset the password for the device

  I tried to change my password for the device, and then I pressed cancel. I changed head to change my password.   My phone has allowed me to use my original password. The next morning, I typed my password and the phone kept saying incorrect password.  How I change my password for the device?

  When you get to 5 or 6 incorrect attempts the device prompts you for blackberry. This is a safety feature to avoid wiping the device accidentally, and also so that you can see if you enter characters, you think that you enter.

  See if the device is to invite you to enter blackberry. If so, do it and then you should power try again the password.

  And if you left the password change and that he has not really changed the password, then your password is always the same as before, no different. Be careful and make sure that you enter the characters that you intend to enter.

• How to find the password for my Motorola Wireless?

  How to find the password for my Motorola Wireless?

  How to connect another computer to the Motorola Wireless?

  ... and now my computer won't connect to the wireless...

  Now would be a good time to use the instructions of the Setup Guide quick Motorola SBG940.

  ... I think I'll call my cable provider then!

  It may be better to talk to someone on the phone instead of trying to communicate via typed messages repeated as some of the information in the previous messages typed always seem to be lost in translation.

• Mark for translation - case?

  Can anyone clarify how to use - Mark for the translation - check under the display name box.
  
  Should select us the check box to be available for translation.
  
  Thank you!

  Hello Kumar,

  You must check this box if you want to convert the full name in the language that you select for the instance.

  Let's say in futture if you change the language for a specific use, at this time there if this box is checked, then only the full name is converted.

  I hope that helps!

  MILIN

• How cancel a monthly fee for storage space I need is no longer? Does anyone know how to do this?

  How cancel a monthly fee for storage space I need is no longer? Does anyone know how to do this?

  You can change the storage volume by selecting a new plan directly from your iPhone, iPad, iPod, Mac or PC (for example, a plan of 5 GB to replace a 200 GB plan). The downgrade will take effect after the end of your monthly or annual subscription in progress.

  iOS

  
  

  1. If you use the iOS 8 or laters, go to settings > iCloud > storage. If you are using an older version of iOS, go to settings > iCloud > storage and backup.
  2. Click Change storage Plan.
  3. Press Downgrade Options and enter your Apple ID.
  4. Choose a different plan to use when the expiration of your current storage plan.
  5. Tap done.

  
  OS X

  
  

  1. Choose the Apple menu > System Preferences, and then click iCloud.
  2. Click on manage in the lower corner on the right.
  3. In the upper right corner, click Change storage Plan.
  4. Click Options to Downgrade.
  5. Enter your Apple ID password, then click on manage.
  6. Choose a different plan to use when the expiration of your current storage plan.
  7. Click done.

• How many gigabytes of data storage has the new Apple Watch series 2 and how many GB are free for music?

  How many gigabytes of data storage has the new Apple Watch series 2 and how many GB are free for music?

  Hello

  Apple has not yet announced the capacity of storage or the music of Apple Watch series 2 storage limit.