How is it that some machines running windows vista, when the router is updated or changed, they show "limited or local only" when you reconnect then wireless.

Similar Questions

• I have a DELL Inspiron 6400 running Windows Vista. The backlight turns off.

  I have a DELL Inspiron 6400 running Windows Vista. The backlight turns off when the charger is plugged after about 10 to 15 minutes. If I shine a torch on the screen, I see about the display is always. If I select change user from the menu start or stop / restart the machine, the backlight turns on and will last for another 10 to 15 minutes. I tried in safe mode and the same thing happens. Can someone help me with this problem?

  It could be the inverter Board or the backlight itself on the way to the outside. Whatever it is, it is definitely a hardware problem and it will take a good repairman to fix. You can contact Dell and see what they would charge to fix this, just to see if it would be more cost-effective to buy a new laptop or have it repaired. Because it is 5 years since it is manufacturing, you can be better to save your pennies for a new :-(

  SC Tom

• I am running windows vista on the PC of my church and have inserted a USB stick with a MP4 file on it, but I can not read this file.

  I am running windows vista on the PC of my church and have inserted a USB stick with a MP4 file on it, but I can not read this file. Can I get help?

  I created a video for our Church on a desktop of Windows 7 through Pinnacle Studio 14 (editor) and registered as a .mp4 file. I then put it on a flash drive and put the flash drive in the computer of the Church, that is running Windows Vista, and the file will not play. Please provide help quickly!

  -Corey

  You need a media player that is compatible with .mp4 files.

  The following preferential ticket should solve your dilemma.

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  VLC Media Player
  http://www.filehippo.com/download_vlc/
  (works on XP/Vista/7)

• How can I restore my Acer laptop running windows Vista to the factory specifications?

  I was given an Acer Aspire laptop. It is running Windows Vista with 512 MB memory RAM. It has been used and I want to try to restore it to the factory specifications. How can I do this? I tried system restore and it fails every time.

  Hello

  you have a very low amount of RAM to run Vista

  System Restore should not perform a recovery plant

  Here are the different ways to reinstall Vista

  Contact the manufacturer of the laptop computer and ask them to send you to vista recovery disks to reinstall the operating system back as it was when you bought it

  they do it for a nominal cost of $

  https://secure.TX.Acer.com/rcdb/main.aspx?brand=Acer

  ____________________________________________________________

  also ask them if you have a recovery partition on your hard drive to get back to the way you bought

  you would normally press F8, F9, F10 or F11 or Alt + F10 or 0 to start to start the recovery process according to the manufacturer

  Ask them of the exact key sequence

  Acer is usually press Alt + F10 at startup to start the recovery process or through the Acer eRecovery Management under all programs

  __________________________________________________________

  or borrow a vista microsoft dvd; not a HP, Dell etc recovery disk

  Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer

  they contain all versions of vista

  This is the product key that determines which version of vista is installed

  http://www.theeldergeek.com/Vista/vista_clean_installation.html

  ____________________________________________________________

  How to replace Microsoft software or hardware, order service packs and replace product manuals

  http://support.Microsoft.com/kb/326246

• Im trying to install the Nvidia drivers for my new video card and its saying that my operating system (windows vista 64-bit) is not compatible, which means they are 32-bit drivers, it's fake.

  Im trying to install drivers for a Nvidia Geforce GTX 260 on my windows vista 64 bit computer. Every time I have try and start the download, it is said that my driver is not a 64-bit driver, which is false, and that my system is 64 bit, which is true. SO... after I click 'OK', it begins to download only to have another pop-up saying "Setup has detected that the system in use is not windows vista 64 bit" which it is. Basically its contradiction with himself. im confused.

  Im running windows vista 64-bit.

  I just upgraded to a Nvidia 9800GT, to a Nvidia GTX 260.

  In frustration, I deleted all the old drivers, but the new will not download.

  The first error says that the drivers are not 64-bit.

  The second error indicates the operating system is not 64-bit.

  Let the site nVidia Driver detect your video card. If it still does not work, contact nVidia for a solution... Mike Hall MVP - Windows Experience http://msmvps.com/blogs/mikehall/

• HP laptop Dv6105us - someone running Windows 7 on the F.43 update BIOS?

  I've updated computer laptop DV6105US used my friend for the retail of Windows 7.  I wasn't able to get the wireless and wireless button to work even with the Broadcom driver updates and the Internet Wizard from HP. It is possible that the wireless did not work when he got the machine because he has never tried to use it. Portable hardware Forum, one of the respondents said that it is probably a problem with the power supply circuit wireless. Maybe there is no chance per cent the implementation with the new BIOS (F.43), but I might as well give it a try if I know that others have Windows 7 running on the new BIOS F.43.  I know that this has already passed the law of diminishing returns, but I am * beep * worried not until there is absolutely no option left. I understand that replace the motherboard probably could solve the problem but I'm not hung up on fixing this thing a lot, for example, I can install the new free BIOS update...

  Hello:

  If you try to update the BIOS in windows 7, you will almost certainly clean the laptop and the wireless doesn't work don't not will become a non-issue.

  You can only Flash the BIOS on XP or Vista.

  It is easy to tell if the motherboard has cut the power supply to the card.

  1. There is no card WLAN listed in the category network adapters in Device Manager.

  2. There is no device named network controller! listed under an other devices category in Device Manager and you have installed the HP Wireless Assistant software.

• How can I find my product key Windows Vista if the sticker is missing on my laptop?

  original title: HOW can I FIND MY PRODUCT KEY IF HE CARRIED OFF THE STICKER ON MY LAPTOP?

  I had to reinstall Windows Vista after that my laptop crashed due to a virus and windows said now that your version of windows I have is not authentic and that I must activate Windows now and for that I need my product key and I cannot read above the bottom of my laptop as the sticker is removed.

  Hello

  If you reinstalled vista and it is not yet activated and the product key is dissipated the tile we can not help you

  manucfacturer recovery disks normally do not require a product key of the owner of the computer input

  Contact the manufacturer of your computer

• Error com Surrogate in Windows vista when you access Pinnacle Studio

  Original title: using COM Surrogate error pinnacle studio 11. How to make

  With the help of COM Surrogate error pinnacle studio 11. How to make

  Hello

  1. What is the exact error you get when you open Pinnacle Studio 11?

  2. what type of system of your computer (32 or 64 bits of the system)?

  3 is it with Pinnacle studio, or by browsing the folders containing video or multimedia files?

  I suggest to perform the clean boot of your computer and check if that helps.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: When you are finished troubleshooting, follow these steps to reset the computer to start as usual. See step 7 to article

  Also, try the following steps and check to see if they help.

  1. click on start.

  2. right click on computer and select Properties.

  3. click on advanced system settings, click on the tab advanced,

  4. in the performance section, click settings.

  5. Select the "Data execution Protection" tab and then click on the option "Turn on DEP for all programs and services except those I select".

  6. click the Add button and browse to C:\Windows\System32\dllhost.exe

  7. click on open. Click OK in the warning message.

  8. click apply/OK.

• What should I do if I accidentally reinstalled windows vista when you try just to update?

  Help! I had trouble to receive updates of service package and so I put my windows boot drive and I just wanted to update, but I miss somehow understood and reinstalled windows vista. I have nothing now. Have I lost all my documents, photo, music and software?

  Hello

  a clean install wipes the hard drive clean of everything

  You cannot undo what you've done

  If you have lost data, you can try this

  http://www.Piriform.com/Recuva

  Read also:

  Since we don't know exactly how you reinstalled it seek a windows.old folder

  How to restore your personal files after you perform a custom Windows Vista or Windows 7 installation

  http://support.Microsoft.com/kb/932912

  or even return to a previous operating system by using the information in file window.old at the link below

  http://support.Microsoft.com/kb/933168

  If the above does not work:

  Try the data recovery experts

  but they are very expensive

• y at - it a fix for the problems of compatibility for windows Vista when you try to install windows 95/98 games?

  just replaced an old unit under xp home which took place games supporting windows 95/98, new unit has windows Vista and will not load these games.thanks for any help.

  Hello

  Have you tried compatibility mode?

  http://Windows.Microsoft.com/en-us/Windows-Vista/make-older-programs-run-in-this-version-of-Windows

• where can I get windows games that are bundled in windows vista. The game folder is empty?

  I had to reinstall and when I did my games disappeared, where can I get these?

  Hi sqwddr,

  Step 1: Make sure that the games feature is on. To do this, follow the steps below:

  (a) click Start, click Control Panel, and then double-click programs and features.

  (b) click on Turn Windows Features on or off.

  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  (c) select, or place a check mark against games feature

  (d) click Ok, and then restart the computer

  Check if it is resolved

  You can also view the article below, which deals with a similar question

  Games of not not lance of Vista Start Menu

  http://support.Microsoft.com/kb/972035

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• How to fix error code 643 in windows vista

  How fix the error code 643 for windows vista when you try to install the updates.

  See if this sugesstion can help you:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/4a6ea38b-9104-4547-8802-bc94bb6127a9 >

• I am running windows 7 on my laptop and I want remote access to my office at the top of the page that is running windows vista how to

  Im trying to get my laptop for my desctop remote access how to

  http://www.howtogeek.com/HOWTO/Windows-Vista/turn-on-remote-desktop-in-Windows-Vista/

  The information above should help.

  http://Windows.Microsoft.com/en-us/Windows-Vista/connect-to-another-computer-using-Remote-Desktop-connection

  Connect to another computer using Remote Desktop connection

  See you soon.

  Mick Murphy - Microsoft partner

• My computer with Windows 7 Home updated for Firefox v34.0.5 but my two computers that are running Windows 7 Pro have not yet updated beyond Firefox v34.0. Something wrong?

  See info above. I re - run the update process at least 10 times on the two machines running Windows 7 Pro (most recently this morning), and whenever the two machines running Windows 7 Pro (one is 64-bit, one is 32-bit) say that Firefox v34.0 is "up-to-date". I checked Mozilla.org, which States that Firefox v34.0.5 was released in mid-December, but he said nothing about whether this update was only for some OSs. I also ran several scans antivirus from different vendors on two machines running Windows 7 Pro and all scans show no problems.

  Please advise is there are different versions of Firefox for Windows 7 family or Professional Edition, or if I'm having a problem. If I'm having a problem, please tell us how I can correct.

  We changed how updates were deployed to a test, that's why you were probably the 34.0.5 on a computer and 34.0.0 on the other. The only difference between them is that 34.0.5 defines yahoo as the default search. You don't need to worry because of the different versions (who both were released at the same time BTW)

• How do I determine that my copy of windows contains all the latest updates, service packs, patches, etc?

  How do I determine that my copy of windows contains all the latest updates, service packs, patches, etc?

  In addition to the updates of Windows, there are some tools to run that will give you all kinds of information on your PC:

  Microsoft Baseline Security Analyzer

  Belarc