How is it, windows XP or Windows 7 cannot see network drive?

first of all, I have 5 computers.  Installed with Windows 7 installed with Vista and 1 2 3 MacBook Pro.  I created 1 network drive to more easily move files named "ShareMe.  All the protable can use the shared folder since I gave permission to everyone.  All the computer can use the network printer.  I installed Windows 7 on a Mac using VMware 2.0.5 and able to print using printer network with no problems.  I installed another Windows 7 on VMware Workstatin on a PC, and it can use the network also printer without any problems.

(Everything is legitimate and so far I just was not updated to 2.0.6 because I heard a lot of things to have a slow speed)

That is the problem, not an operating system that runs on VMware can't see my shared folder in the network, it cannot see networked host computer.   I speak not shared folder between VMware and the computer host.  Between the host and VMware are very well; However, I'm talking about that all shared folder the computer can see (folder ShareMe).

All in the same workgroup

Using NAT to network adapter

Tota1 wrote:

Using NAT to network adapter

This is the problem because it puts the virtual machine on a separate subnet, then the one on the host is.  Past to open and release/renew IP on each virtual Machine.

Take a look at: Understanding Networking in VMware Fusion

Tip: With a Machine virtual Windows switch between NAT and connected by a bridge or visa versa, can be made without restarting, or even by using ipconfig to release/renew the IP address.  Simply toggle the State connected/disconnected from the network of the <...>Network icon on the status bar from the type of network between the two. It takes but a few seconds and a few clicks and is faster and easier the alternative methods.

Tags: VMware

Similar Questions

  • 10 Windows installed cannot see my drive OSX

    Google brought me here because I just installed 10 Windows via Boot Camp, and I can't see my drive OSX.  I can't remove basic storage as it is a merger.  I guess that this problem has never been fixed by Apple?

    Is there any third party/app driver who can afford that?

    Thanks for your help.

    < re-titled by host >

    N ° it is unlikely that Apple will have a driver Windows CS.

  • Re: Satellite A200-209 - Windows 7 cannot see DVD drive

    Hey

    Ive reinstalled my (new) PC from Windows 7 to Windows 7 and some time after I had this problem.

    My DVD drive is "unseenable" of Windows and it can not read any disks.

    I think its something about the drivers, but I can't find a driver for DVD: P

    THX.

    Optical disc drive is listed as unknown device in Device Manager?

  • How to install windows on a new hard drive

    I lost my hard drive and buy a new.  I do not have my disk but have a product code valid for my computer.   How to install windows on a new hard drive

    OT:

    Windows 7 home premium edition

    You will need to borrow a disc of Windows 7 Home Edition Premium or borrow a disk upgrade or full version retail and create a bootable copy with option to select Windows 7 Home Premium during installation. To learn more:

    http://answers.Microsoft.com/en-us/Windows/wiki/Windows_7-update/how-to-what-are-my-options-for-obtaining-Windows-7/528163c1-0b2e-4AD2-a26d-7112851d1dc2

  • How to map an instance record as A Local or network drive in Windows 7?

    How to map an instance record as A Local or network drive in Windows 7?

    Try this list of steps and see if it helps.

    Step 1: Open my computer and click on the button 'map network drive '.
    Step 2: Name the folder and select "connect using different credentials and then click on"connect to a Web site that you can use to store your documents and photos. "
    Step 3 - click on "next".
    Step 4 - Select "Choose a custom network location" and then click "Next".
    Step 5 - Type in 'ftp://yourwebsite.com/' as address network or Internet
    Step 6 - uncheck "Log anonymously" and type your user name for FTP access.
    Step 7: type a name for this location.
    Step 8 - click on finish
    Step 9 - now, when you double-click your new network location, you must open a session. Type the password, uncheck the box "connect anonymously and finally check the backup password, unless you want to enter each time.
    Step 10 - transfer your files of images to the server, as it is a folder on your PC.

  • I can't use windows Explorer or the network drive mapping to access my NAS drive more.

    original title: strange NAS problem

    Hi everyone I can't seem to fix this strange problem.

    I can't use windows Explorer or the network drive mapping to access my NAS drive more.
    I am running windows 7 Professional 32-bit on my PC, and until about a week ago she accessed from my PC very well.

    The location could not be reached and have not been able to run since said today that I went to update it and the drive mapped. I'm at my wits end.

    Here is some info.

    I can access to other computers and devices on my network.

    I can access the internet.
    I have a windows XP PC in the House who can always connect to my fine NAS drive (even if it's not mine).
    I PING the NAS drive.
    The NAS drive will do the same if connected via cable or by wireless.

    UPDATE: after the implementation of a shared folder on a Windows XP computer on the same network I am also unable to acsess the part of my PC. So I can assume that I can't browse all share folders or NAS drives on my local network.

    Help, please.

    Thanks for the help, but I fixed my problem

    Here's what I did in case anyone wants to know.

    I went into Device Manager and went to network adapters.
    I then expanded this section and under view changed to display hidden items.
    Several hundred elements appears (for most 6to4 adapters) and I deleted all the.
    Then click scan for new hardware.
    And... everything works again! YAY!

  • Windows 7 cannot see my Mac on my home network

    I can share between the two computers, but my windows 7 cannot see the Mac when I go to the network in windows Explorer. However, I see the PC from the Mac. Both are under the same working group: MSHOME.

    Any help would be greatly appreciated,

    Brian

    Hello

    Please keep us informed about the issue.

    I think that the problem to which you may be due to viruses or malware.

    There could be chances that some settings were not correct or there could be a network congestion.

    You can also look at post Len Flier in the thread following parameters of Mac replied on September 29, 2012.

    http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/still-cant-get-Windows-7-to-see-Mac-on-home/d6bd510c-A956-4984-8e80-66f784c904c3

    Feel free to visit our Web site for any help with the Windows operating system in the future.

    Thank you.

  • Windows 7 cannot see is not my SCSI disks when I try to install. As the IDE drive is showen but is not usable.

    Windows 7 cannot see is not my SCSI disks when I try to install. As the IDE drive is showen but is not usable. Is there a FDISK program that can be run to solve this problem from a command promt?

    Hello

    You try to access BIOS and change the SCSI to IDE in the BIOS or Raid in IDE and try to install Windows 7.

    If it fails, contact your SCSI manufacturer for the latest drivers for your SCSI and install it by clicking on load drivers and try to install Windows 7.

    Hope this helps and works.

    Chris

  • How can I correct gateway is accessible, but cannot receive network traffic on internet

    I have a Windows 7 laptop. All my drivers are up to date. It happens every 10 to 15 tion.  When problem he pulls it only resets my wifi. Then it will happen again. I reset my router already. I pass the channel for my wifi. I have uninstall the anti-virus software.  I'm stuck here please help.

    How do i fix gateway is accessible but cannot recieve network traffic from internet
    

    Hello

    I appreciate the efforts to try to solve the problem. You might face this problem because corrupt or the network driver. You could also face this problem because of the incompatibility between the IP address. Please write us with the following details.

    1. What is the brand and model of your computer?

    2. You did it all changes to networking prior to this problem?

    3. Do you have an error message when you try to access the Internet using a browser?

    I suggest you follow the steps below.

    Method 1: Run the network troubleshooter utility.

    Click on the link below and run the network troubleshooter utility. Automated convenience store is a tool that can find and automatically fix problems with your computer. These utilities are not designed to solve all the problems, but they are useful to try because they can often save you time and effort.

    Using the troubleshooter from network in Windows 7

    http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

    Check the question and proceed to the following method if you are still having problems.

    Method 2: Try resetting the TCP/IP stack.

    Click on the link below and follow the steps as for Windows 7 in the section I would like to fix it myself.

    How to reset TCP/IP using the NetShell utility.

    http://support.Microsoft.com/kb/299357

    You can also follow the steps in the tutorial below. It contains the methods of troubleshooting issues related to the network database.

    Wireless and wired network problems

    http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-7&V1H=win81tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

    Let us know the status of the issue and the details asked. We will help you.

  • How to install Windows XP using USB Flash Drive in Windows 7?

    I m windows 7 and want to install windows xp, how to install windows xp using a usb flash drive. I have the iso file from xp.

    Hello

    The Microsoft Windows 7 USB/DVD download tool is designed for the installation of Windows 7, is not for the installation of XP.

    I suggest that you use Google that Microsoft does not support what you want to do.

    http://www.computerhope.com/issues/ch001366.htm

    ______________________________________________

    As you have the ISO file, make a record with him:

    https://NeoSmart.NET/wiki/Burning-ISO-images-with-ImgBurn/

    See you soon.

  • How to transfer windows on a new hard drive

    How can I transfer all my system windows on a new hard drive

    Hello

    There are different ways to do

    hard drive manufacturers will normally provide the cloning software to move your operating system installed from the old to the new hard disk

    Search for information on this subject on their Web site

    If you have vista business or ultimate, you can use the builtin vista complete PC Backup to move

    read the information below

    http://www.bleepingcomputer.com/tutorials/tutorial145.html

    or if you have vista home version you'll need 3rd party software

    link below is an example of this:

    http://www.Acronis.com/homecomputing/products/TrueImage/index.html

    also to put your machine how you bought, if you decide in different ways:

    1. If vista is preinstalled, you should have a recovery on your old hard drive partition

    You can recovery disks to reinstall on your new hard drive

    ask the manufacturer of the machine how

    2. contact the computer manufacturer and ask them to send you to vista recovery disks to reinstall the operating system back as it was when you bought it

    they do it for a nominal cost of $

    3. or borrow a microsoft dvd vista

    Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer

    they contain all versions of vista

    This is the product key that determines which version of vista is installed

    Save all data, because it will be lost, do the above

    _________________________________________________

    and read this on how to back up your data and also make a complete pc backup

    make backups on an external hard drive or DVD

    see if this information helps you

    How to make a backup of your data

    http://www.vista4beginners.com/how-to-backup-your-data

    How to restore your files

    http://www.vista4beginners.com/how-to-restore-files

    the 1st link below is how do the backup complete pc

    http://www.bleepingcomputer.com/tutorials/tutorial145.html

    and that is how do to recover the backup complete pc

    http://www.bleepingcomputer.com/tutorials/tutorial144.html

    and here is the information of microsoft in restoring a system image backup

    http://Windows.Microsoft.com/en-us/Windows-Vista/restore-your-computer-from-a-system-image-backup

  • How to record TV with Media Center (Windows 7) to a network drive?

    Well, you would think that the new MediaCenter Windows 7 would live up to the recording of your TV for a network/player sharing. Nevermind, it seems that it is just not possible.

    I have a windows 2008 R2 server and a Windows 7 machine with a TV card. Since my server has 2 TB of storage, it would be nice to save directly to a network drive. (I rode like Z :).

    I tried the following:

    1. By selecting Media Center itself: does not. Is not available.
    2. Editing the registry: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Media Center\Service\Recording to RecordPath Z:\TV. Does not.
    3. Editing the registry: set RecordPath to \\server\TV. Does not.
    4. Create a symbolic link (mklink \D) of Z:\TV and \\server\TV with parameter in the registry under RecordPath.

    I am currently out of options. I could of course install Windows7 on my server, but I have no license for this, and my windows 2008 r2 is free from dreamspark.

    So: How is the world possible to make this work? And why not just MediaCenter detects my network sharing?

    Record on the network is not supported.  The smallest hiccup of network could cause problems with registration, or even TV live as the recording buffer would be located at the remote location.

    One thing you can do is to use Windows Home Server Power Pack 3 and its function of archive TV which you can configure to automatically move all your records or only those you want.
  • On the installer of Windows 7 backup to network drive, how to avoid the user name and password?

    I have Windows 7 x 64 Pro on a PC to my home network 2-computer. Back up my files on a 1 GB network drive using outdated software. I would use the backup of Windows in the same way, but I'm stuck at the first step in backup: "what is my username and password?'." " I have no need to use either as well as single-user computers and log on automatically.

    How can I convince backup W7 to accept that they are not needed? Otherwise how can I, with the status of administrator, either:

    1. check if there is an existing id/password?
    2. If necessary, set up a new id and password without harming my Autologon class?

    Hi Hershmab,

    Thanks for the reply.

    The question that you are running in suitable for the forum on the link below.

    http://social.technet.microsoft.com/Forums/en-US/category/w7itpro/.

    Please report if you encounter a problem with Windows. I will be happy to provide you with additional options.

  • How to disable windows update auto update the driver for that particular device

    I have a MacBook air (13 inch, mid-2012)
    I had already used a thing of Apple called "bootcamp" to partition the hard drive. Boot camp also allows you to assign which os is used with starting the computer.

    Win 8 has been installed using an iso of Windows 8 and Microsoft Windows 7 USB DVD Tool to create a bootable USB key.
    That all worked. but there is no drivers as one might expect. If the video was VGA and there was no sound, etc.
    I downloaded a zip file containing all the drivers and an installer or install the program from apple.
    BootCamp5.0.5033.zip
    I ran the installer and everything was installed and worked. He couldn't believe my luck. I've now had about pain free installed win 8.

    But a frustrating problem has developed.

    Every day or so my external screen connected by a mini display port adapter stops working. I restore the
    pilot and it starts to work. So I guess that put automatic catch up and install a new driver. It does not work, I do this back and the cycle repeats. But... why...

    I see all over the internet means to stop windows auto update all together, but this isn't what I want.

    That is the question:
    Can someone help me to tell windows update doesn't auto not only the video driver?

    Here is some info in case it would be useful to you gurus
    This driver works:
    Graphics card Intel (r) HD 4000 (Microsoft Corporation - WDDM 1.2)
    Driver provider: Intel Corporation
    Driver date: 26/05/2012
    Driver version: 9.17.10. 2768
    Digital signer: Microsoft Windows

    This driver does NOT work:
    GPU Intel(r) HD 4000
    Driver provider: Intel Corporation
    Driver date: 12/12/2012
    Driver version: 9.17.10. 2932
    Digital signer: Microsoft Windows Hardware Compatibility Publisher
    Device Manager > display... > events tab

    A waste of time this as frustrating. Now how to force it to never automatically updated only the video driver.

    Hello

    You can not disable the automatic update to a specific device.

    However, you can take control and disable the AutoUpdate for all hardware devices, which is the best option.

    Press the Windows key + X to display the System menu , and then click Control Panel.

    Select devices and printers.

    In the top section, click on icon with the name of the computer and select the Settings of Installation of the device.

    In the settings window, select No, let me choose what to do and never install driver software from Windows Update.

    Click the save changes button.

    This will prevent the hardware drivers installed by Windows Update. You will receive still all the other updates to Windows as usual.

    If a piece of hardware should be updated in the future, you can just go the site of manufacturers of equipment and download/install the latest driver or reverse these options and get the driver from Windows Update.

    Concerning

  • Windows logon fails when network drive mapping

    I can no longer map a network drive of my laptop Vista business to my PC (XP).   I enter a username/password valid name, but I still not unsuccessful logon.   I read a gazillion discussions and have made the change to the recommended without result SECPOL tool.

    What makes me mad, it's this used to work!   I recently had to physically move the PC (renovation of the kitchen) and perhaps its something stupid like a missed connection.  Yet, I have access to the internet very well.  I can ping 192.168.0.3 192.168.0. * I'm confused comment.3 is affected. My tivo est.4 and I tested this connection and that's fine.

    I even had a network printer set up works very well: Photosmart \\192.168.0.3\HP...

    The only area involved is WORKGROUP.   I created an account "lapguest" on the PC specifically for this purpose

    I forget some syntax?   The GUI said essentially the same thing.

    C:\Users\Wendy>net use w: \\192.168.0.3\pcc * / USER: WORKGROUP\lapguest
    Type the password for \\192.168.0.3\pcc:
    86 the system error occurred.

    The specified network password is not correct.

    C:\Users\Wendy>net use w: \\192.168.0.3\pcc * /USER:\\192.168.0.3\lapguest
    Type the password for \\192.168.0.3\pcc:
    The context of the user provided is not valid.

    More help is available by typing NET HELPMSG 3775.

    I think its something stupid, I forgot, but he is elusive.     I also put the name of the computer in the 192.168.0.3 place, but it does not help.  There is no involved DNS.

    Using the graphical interface, I can browse the network to find the folder to add, but there is nothing under the computer name of the computer.  "pcname" is not a valid host name.   Otherwise download "logon unsuccessful".   I tested the connection on the PC and it is certainly true.

    In addition, I traced \\192.168.0.3\C$ successfully, but I got my LOCAL drive (portable) C.   ????  that should be a big clue, but call me clueless...

    I even uninstalled mcafee (completely) just in case.  did ' t like it anyway so no biggie.

    I know that there is a big DUH when this has been resolved.

    Thanks Aaron, but I think I did it to her.

    In the meantime, I decided to try sharing in the opposite direction.   Which made me respond finally that est.1 which est.2 whos.3.   A lot of listening to ipconfig.     What etait.3.2 is the last time.  (the est.2 PC and computer laptop est.3)  I still want to understand how these numbers are assigned.

    I found the option - rr in my earlier review, but do not know if he had an impact.   Also reluctantly, I created an account with the same name on both systems to try.   First of all, I shared with who.    Later, I could share by using the account name that exists on the PC (lapguest).

    I don't really know how the problem etait.2 et.3 mixup questions and/or syntax (file specification must be \\192.168.0.2\share-name) spec not \\PCNAME\share-name and the user must be PCNAME\username) and/or services and windows XP/VISTA problems.  Maybe my new sequence got something instantiated later.   Hope it sticks, whatever it is.   I wrote my orders exactly.  I hope that when I reboot or whether, I not have this problem again.

    Ah-ah... before you sign this note, I went to test the laptop via the network printer I had previously put in place of a printed page.  It did not work.  I can't see why.  the specifications of the printer is Photosmart \\192.168.0.3\HP... which was fine before, but now it faudrait.2.  I'll have to add another printer network for the new address.  I hope I remember how to do this.

    Now, I can clearly see the benefits of DNS.  Is there a simple way to create a name "servername" instead of having to depend on 192.168.0.n?

Maybe you are looking for

  • drivers for windows 7 envy dv6 7210us

    I got my laptop HP dv6-7210us for windows 7 ultimate 64 envy. I have everything works except the SM bus controller and and 2 usb controllers I looked in Device Manager and does not give me much information they are devices on the pci bus hope you can

  • Can I upgrade iPhone iOS to iOS 9.2 5 7.1.2

    We need to modernize our iPhone 5. Never get us down to iOS 8. We wonder if we have to iOS8 then iOS9 or if this is even possible.

  • HP G62 model #229WM: Bios

    I do not know the password of the bios, the laptop was given to me by a friend and they don't remember the password either.  The key to the #85231673 Bios!  Please help me. Thank you!

  • 4 GB permanent RaAM upgrade T440s

    I was wondering if it is possible to upgrade to 4 GB on the T440s bed, not a big problem if I can't, I was wondering because I can actaully get 2 sticks 8 GB cheaper than one so I was hoping that I could use both! suggestions for would be nice! Also

  • Update for windows vista platform will not install KB971644 - error message 80041006__

    my computer tried to install the update of platform for windows vista KB971644 since Novermber 5/09 - I get an error message that is not properly configure #80041006.