How is it you can't use more than 126 GB of a 1.5 TB with LabVIEW Real-time hard drive?
How is it you can't use more than 126 GB of a 1.5 TB with LabVIEW Real-time hard drive?
It's only 8.3% of disk space!
The national Instrument is reformat that you drive less than 126 GB or replace the drive with a less than this size.
Please OR tell me you go fix your LabVIEW Real Time soon, and that we will not have to wait for LabVIEW RT 9.2.1 in 2011 for this one to fix.
Readers as high as 126 GB or more have been around since mid-2002. It's about 7 years now and LabVIEW Real-time STILL cannot use greater than 126 GB drives! Please OR. Do something.
We deserve the patches for older versions of LabVIEW RT. What about updates to LabVIEW RT. As 7.0.2 7.1.2 7.6.2, 8.0.2, 8.2.2, 8.6.2.
We don't need new features or versions of LabVIEW RT as 9.0 until we have some of the bugs fixed in existing versions.
Tags: NI Software
Is it possible add more than 2 GB of memory?
What happens if I add e.g. 2 x 2 GB?
Intel says GM965 supports 4 GB max memory...
No you can not use more than 2 GB of RAM. You can upgrade the laptop up to 2GB (2 x 1 GB).
> What happens if I add e.g. 2 x 2 GB?
I think that nothing will happen ;)
Either your laptop will not start or will start the laptop but the full RAM will not be recognized
can I use more than 2 devices for 1 account creative cloud?
I know that it is limited to 2 devices for activation / account.
You can, but you must disconnect from Adobe Creative Cloud app of any one of the 2 previous computers, so that you can activate on other computers.
I have a toshiba Satellite L650/0ed, it's good if I use more than one drive 8 GB flash for "ready boost" - what is the maximum number of using flash-drives can devote to the "ready-boost.
In addition, if I use a 16 gb flash drive, will this affect more memory "ready boost".
Why the 3.5 drive seagate expansion 1 TB is not compatible for ready-boost.
Please check this Microsoft page that describes the ReadyBosst
There, you can find this statement:
+ ReadyBoost works with storage devices more flash. In Windows 7, it can handle more memory and even multiple devices * eight *, for a maximum of 256 GB of additional memory. +
I hope this can be useful!
My students purchase the book for class and use the codes of the lesson in the back of the book. These codes may be used more than once? Sometimes my students buy used texts. Thank you!
Yes, I use classroom in a book for Photoshop and InDesign. Thank you!
Zolabud here to say Hi and hoping someone can help me with my problem.
I bought a Hewlett Packard 980 cxi to go with my new lappy.
I buy good original HP refills and am very satisfied with the quality, ease of use and the pictures it produces.
However, I bought from a friend and it did not come with an instruction manual.
I thought I got it earlier, I found a manual on this site, but it didn't tell me what I want to know.
My question is...
I have reproduced many pictures of my family, all the 10 "x 8".
I understand the wizard who just gave me the choice of the size of the photos I want ok... But every time I print more small, say v 5 "3", I find myself with half of the photographic paper wasted...
One of my friends sent me a few pictures, and somehow, he took 9 different pictures on one page!
I was so impressed... But all I really want is 2 different pictures on one page.
I can't understand how do.
Can anyone help please?
Thanks in advance.
P.S. I'm not that computer... Be gentle. !!
This might help
I'm working on a project that may require up to six modules USB-6008. Before I buy more I need to know if I can use all six at once in the same Lab View program. Can anyone help?
LabVIEW is capable of handel that the number of data acquisition tasks quite easily, but you have to remember that USB has a maximum bandwidth. Therefore, you have to make sure you have enough on your PC USB hubs. In general there are between two to four USB slots by hub and each of them will have a maximum flow rate which will be divided between all devices connected to this hub. So even if you can get four USB DAQ devices attached to four USB ports if they are on the same hub, you might notice significantly reduced rates of data transfer. I would say rather than buying six or more USB 6008, why not buy a PCI card that is able to handel a lot more entries with greater bandwidth.
I have Windows 7 on it now and it works fine, but the specs say that it can take only 2 GB of memory. I didn't know if the Compaq Presario SR5030NX is capable of running Windows 8 and if that would allow him to use more memory, or if the memory is a hardware limitation.
The following link will offer you if HP has tested your system for Windows 8:
If your system is not tested, HP will not release the drivers directly for your site template Web HP.com.
The following hyperlink will suggest if your system is compatible with Windows 8:
If your system is compatible with Windows 8, most of the pilots would be available through Windows 8. If you need any specific driver, please follow these steps:
1. in the run box, type devmgmt.msc.
2 unknown devices would be listed as such and plotted with a yellow question mark.
3. Select the unknown device or any other device you need of drivers and right-click to access the properties.
4. in the Properties window, click the Details tab and select Device Instance of Id or hardware ID from the drop-down.
5. an alphanumeric string, like this DEV_7130 & PCI\VEN_1217 & SUBSYS_012F1025 & REV_01\4 & 6B16D5B & 0 & 33F0 is the marker for the identification of the unit.
6. Please provide this number so we can offer you the appropriate driver.
According to the specifications of your system, the motherboard can support only 2 GB of maximum memory:
I am a beginner in Photoshop, so everything I do to this tent to complete the tutorials.
At a given time of the lesson I started today, mentions of the description that I must make a selection in the left part of the image, add a layer mask and press Ctrl + Backspace to make the selection disappears. I did it, no problem.
The next step is to do the same in the upper part of the image.
My problem is that I already have an active layer mask and I can't repeat the same steps because I am not allowed by the program to create a second in the same layer.
What Miss me?
Its very easy really and you do not need more of a mask. The author would probably include a photo of the layers palette for orientation.
I have not used a path to create the edges of the pieces of the puzzle here, but the principle is exactly the same.
Hope that helps
Hi, I have a cluster HA 3 node with 3 servers esx 3.0.1 running. I have a new 4th server which is esx 3.5 and I want to use as a member of the existing HA cluster. I was told that I can use a 3.5 server in a HA cluster that uses esx 3.0.1
I added the 4th node successfully to the HA by using Virtual Center Server cluster. When I try to vmotion an existing to the new node virtual computer, I get an error message relating to the processor type. The error message indicates that:
"host processor type is incompatible with the requirements of the virtual machines to the CPUID level."
How will I know if the new 4th node has a type of processor that should work in a HA environment with my 3 existing nodes?
I was told that I could run an esx 3.5 in a 3.0.1 cluster HA (I'll upgrade all three 3.0.1 nodes in January).
We said that the processors could be dofferent in a HA cluster but must be of the same type. The processors in the server are:
PowerEdge 2950 intel xeon e5335 2.00 ghz (esx 3.01)
PowerEdge r710 intel xeon e5504 2.00 ghz (esx 3.5)
I want to confirm that these servers must work together using vMotion in a HA cluster?
Thank you, Mark
You can create an EVC Cluster.
Attached a screen with CPU compatibility.
Also read this one
and this one
I ran Win8 in VMware fusion 5.0.3 I put the CPU to use 2 CPUs Win8 but Win8 uses only 1, see the screenshot below. Is this a bug? Thanks for any answer!
This is just the default presentation in Windows 8, 2012. You can change it by clicking on the graph and selecting ' change the chart of "->"logical processors.
I have a free account and want some software trial. I can use this piece of software once, or it does not reset?
That is, I can Photoshop the trial and the trial then again at a later date?
No, you cannot use the free trial again on this machine. Its just for 30 days and cannot be reset. So if you want to use, try the PS, using it on another machine.
I'm trying to set up a family sharing. I have an itunes account id and Setup on my vista desktop. My children are new 6th generation ipod touch for Christmas. I want to implement the family sharing so that they may have music already on the itunes on the computer account and have their own accounts. It says I have to install icloud on a supported device, I did not. can I use one to touch children in order to create an account with my current id icloud and then sign out and they use their ID as usual?
Not at the same time.
Hi, I produce animations with Flash which will be delivered in createjs html5/js hollow. The problem is that after including the first animation in my html Web site, the rest of the animations are crushed with the first, that is why, if I attempt to insert a second animation in my site, in fact, it will replace the first animation, I had already placed...
I already tried the following:
-change the default canvasID to another
-manually change the name of the functions (lib, img, syc) in the Javacript file
None of them seem to solve the problem. So I'm now wondering if it is actually possible to insert more than one animation in a Web site...
I would appreciate a quick response because I am working on a project with a very tight schedule and really need to address this question right.
Thank you very much in advance for the help.
Then, you have made a mistake.
Start with the two different FLAS. one with a red rectangle on the stage and the other with a blue onstage rectangle and nothing else. publish your html and js files.
combine the two into one and, if you have a problem, the postcode of your a single html file and two js files.
I try to use a USB of NI 9201 on a remote real-time target. Here's what I did: 1) tricked out of a desktop PC to serve as target RT using the instructions provided on the Web site of NOR. He now starts in an RTOS with LabView RTOS 9.0. (2) I communicated successfully with the help of a host computer that has a windows with LabView 2009 BONE and I installed the software from the computer remote RT target host using ethernet. However, my problem is when I plug NI 9201 USB on the target RT that I do not see the material listed on the devices tab in MAX and interfaces on remote systems. I tried to get the manuals for the HW 9201, but it seems not much explained here, or maybe I'm looking in the wrong places. Any help is greatly appreciated.
PS: I am attaching 2 JPEGs for additional explanations (tab network settings and the settings of the system).
Thanks in advance,
9201 USB is not supported on RTPCs please visit this link. Currently no usb-DAQ devices do not support an environment CRPC. Only the PCI DAQ devices are supported.
Maybe you are looking for
The XP System I used for e-mail for years died. The hard drive is OK. My mail is on it. I was wondering if I could import the e-mail folders in Thunderbird on my new PC for Windows 8.1 install the hard drive from the old PC and pointing Thunderbird f
Hello I have a question about pilots in general. There are two places we can download drivers for laptops: (1) HP Web site (2) the manufacturers websites Some of the drivers on the HP website are a bit outdated as those on the sites of the manufactur
Hello. I buy the Macbook Air Mid 2015... After the upgrade to El Cap internet speed slowed painfully. What should do? Help, please
I'm having trouble installing Acrobat on Windows 7. I get an error "not enough disk space" followed by "tu7.I'm able to get installed Pro trial version but obviously, my license for the standard version does not.I have deleted all instances of previo
I have a CD of illustrator. I just bought a new Mac. and they do not come with a hard drive more.I have serial numbers. How do I get this on my computer now?EB