How loud noise HDD should be?

Similar Questions

• Loud noise to record using a built in mic

  Hello everyone.

  I try to record audio using my built in mic on my mac on Adobe first CC 2014. When I hit the record button, I hear a loud noise while I record my video. When I stopped recording, he also plays this squeaking nose. I'm unable to save because of the loud noise. How can I solve this problem? I restarted my computer just in case and I still have the same problem...

  to avoid a possible return of your microphone during recording, try (Windows path is) first > Edit > Preferences > Audio > Mute input during timeline recording

  or, place your microphone to your speaker output

• How can I get people to respond to my question the way that I ask him rather than how they think they should?

  How can I get people to respond to my question the way that I ask him rather than how they think they should?

  Nevermind

• Loud noise from HDD on the Satellite C670

  Repost of question with link to problem, not mine but same noise.
  Question is this normal

  http://www.YouTube.com/watch?v=8dFN1kbDKXQ

  Thanks for the replies

  the

  It sounds really bad. In my opinion, you should contact the nearest Toshiba service provider and ask for help. They can check and, if necessary, exchange the HARD drive.

• How to deal with noise HDD G60T-200?

  My HP notebook (G60T-200) start bright one his noicy each time that the hard drive is active. How should I handle it?

  I think Toshiba is the a hard drive manufacturer that does not have a program available disk utility. Here's what they have:

  http://storage.Toshiba.com/storage-services-support/warranty-support/software-utilities

• Portable fan making loud noise? / What should I do?

  Hai,

  should I get my laptop cleaned of laptop repair center or can I do it myself... I am a newbie

  Hello

  First of all, I would like to get yourself some canned air and try to blow the fan through the vents at the bottom and side.  If after that you still have a problem, and your laptop is under warranty, take in a HP Service Center and ask them to clean it up.  If it is not under warranty you cang and patterns looking towards the top of your machine and then find the service manual.  Then you can get out the screwdriver and get to work cleaning this fan.

  The fan draws in air from the bottom and it blows on the side, the problem is that it will also suck in hair, dust bunnies and other debris which is then trapped between the fan and the heat sink.  Over time, it can layer up and choke the airflow to the processor, causing the fan to work more hard and strong.

  Guarantee can be verified here:

  http://www13.itrc.HP.com/service/ewarranty/warrantyResults.do?admit=109447627+1286541891570+28353475

  If you like my advice and this has solved your problem, consider thank me by clicking on the star of Kudos under my name, thank you!

• HP 15 ab 522: loud noise of HARD drive

  My laptop (HP 15 ab 522) HARD drive makes squealing noise whenever the HARD drive light flashes white. The noise becomes quite noticeable and persistent when the system boots, the HARD drive light turns to solid white color. HARD drive runs smoothly when there is no indication of the LED on the HARD drive. I understand that whenever the HARD drive is accessible, he makes noise due to the movement of the read/write head but the noise is louder at compared other hard drives in other laptops. Its a Hitachi (HGST HTS541010A9E680) HARD drive as far as I can make out. I ran also ran a large HDD, all successful tests test.

  Help, please. Thank you.

  Hi @Aayush_K,

• IMac ongoing enforcement if slow takes like 5 min to open the page if it opens even, I don't know what or how to get rid of the things that is what actually happen how to clean what should be cleaned as all these extensions, please can someone explain ste

  I'm no computer expert and cannot afford to have my iMac cleaned. I don't know what to clean or how to do it.  I have extensions that I don't know which ones to delete, things like that, not sure what flash player I need or does come with your old iMac 2007?  I have Adobe who is good or bad but there are a few other does not say what I really should use.  I hate feeling so stupid and for the past 3 days, my computer works so slowly takes good 5 min to open a page opens it sometimes say oops error, waited for a long time, I even guess.  I don't know how to fix or what I should be getting rid of or keep.  I finally get rid of all the caches, just took a chance, still no improvement.  I have never on this point but can't afford to get whatever it is, I need to back up.  So please, can someone help to shed light on this point, what to delete it so my computer can run like he did?

  Thank you very much

  Sandie

  EITHER back up front what!

  Please post a report of EtreCheckof your system. We then look for obvious problems. Please click on the link, download the application and run the report. Once you have the report, please copy and paste into your response to this post.

  If you would like more information on what is EtreCheck, just click on the link and you will find a description of the application.

• Loud noise clicking noise when you try to play a DVD

  HP Pavilion d4995t desktop PC with High Definition Realteck Audio Ultimate.  Vista Premium o/s.  I play my sound through my HDMI cable to the speakers in my monitor. When I try to play a DVD in the DVD player, I get a loud clicking with no sound from the DVD.   This only happens to the DVD.  CDs play sounds without problem.  If I copy the same files to DVD on the hard drive, I can play from the hard drive and the sound works.  If I connect speakers to the audio output and disable the HDMI output, I can play the DVD in the DVD player and games sound through the speakers without noise.  I ran his tool from Microsoft without success.  Updated all the audio drivers.  I reloaded Vista, which corrected the problem.  But as time passed the problem comes back.  I suspect that the problem was caused by a Microsoft Update. Someone at - it suggestions?

  Hello

  Yes, sometimes after installing the Service Pack for Vista through Windows Update.

  Click on start-> "Control Panel-> sounds-> reading-> select Realtek HDMI Output, click Properties. Click on the Advanced tab above,

• Satellite C670-11 q clicking loud noise the HARD drive

  Hello!

  I helped my neighbor to find a new laptop and the entire installation and start-up.

  We ordered a C670-11 q and it works very well, theres just a nuisance.
  The drive made strong rattling noises, not as a dying or working drive. It's the same sound when you turn a disc, just a lot stronger. I guess that's the "arm of disc" that goes into its safe position.

  I don't know if this laptop has a shock sensor to do this? The laptop was flat on the table, and there where NO vibrations while she does. There are no clicks under load, but they occur randomly when walking to the idle or surf/write normal.

  I checked also save energy options and disabled to turn the disk, without help.
  Also, this seemed odd, because the clicks occur often several times in a row. But there is no doubt it more when running on the battery.

  I am running the BIOS and latest drivers in the area of support (as of yesterday).
  The disk is configured in performance mode, I'm testing battery economy - should I?

  And no, the drive took a beating. I was the first person to turn it on.

  The drive is Hitachi, I don't run their analysis - no error.

  Any help is greatly appreciated: o)

  > The drive makes some noises clicking on, not as a dying drive or work. It's the same sound when you turn a disc, just a lot stronger. I guess that's the "arm of disc" that goes into its safe position.

  One of my computer portable HARD drive makes such noise too.

  I m not exactly why, but I also think that it is at the head of discs moving record position.

  However, I think that this is not really a malfunction since the laptop works pretty well and I didn't notice any problems with the HARD drive or files but I have created a backup of my files, just to be sure that you know
  I think you should save the date just to be sure

• Satellite 1100: How to remove HDD?

  Help!

  corrupt Windows operating system so won't boot up in normal ways then were recommended to remove the hard drive and put it in an external enclosure.
  So I can it connect to another pc in order to save documents etc. before using the recovery disk.

  However I do not know how to remove it because it doesn't seem to be a small cover on the bottom. It is a portable satellite 1100. Any help welcome.

  Post edited by: marcpeters

  Hello

  To my knowledge it s a simple procedure because the HARD drive slot is placed at the bottom of the unit near the extension memory location.
  As I remember the cover of the location is fixed with a screw only.
  Simply remove everything and you should be able to open the slot!

  But look man be careful and do it gently ;)

  Good bye

• HP Pavilion dv6t-7000 CTO: fan making loud noise, need of replacement but can't find it

  So my laptop fan started to make really loud this rattle sound. Makes me very self-consciousness of me when I'm in public, so I just Don ' t bother bringing them along. But I really need my laptop with me. The noise usually comes out randomly.

  I tried the HP part Store selector and in the fan section it lists just the fan button, which is not what I need. I think I need to completely replace the fan at this point (I tried to fix the problem of cleaning the fan out of the dust to check it for possible damage, but can not find what is the problem).

  If anyone knows where I can find a spare for my laptop fan and I have to buy with all heat sink heat and thermal paste? I'm pretty experience in the repair of the computer so I have confidence that I can do, more my warranty expired in 2014, so I don't be invalidated anyway.

  If it helps any, the product is of # A3E83AV.

  The noise is usually caused by a defect in the fan motor bearing.

  You were on behalf of the incorrect item.

  What you need is the discreet thermal module, which contains the fan a heat for the CPU and video sink.

  The part number for the product number of your laptop is 682061-001. It's on the document next to the web HP PartSurfer.

  http://PartSurfer.HP.com/search.aspx?SearchText=A3E83AV

• Satellite Pro U400-12y: how to use HDD recovery after the new installation of the OS

  Dear Sir

  I have the Satellite Pro U400-12y and give tem my friend use it when he gets back, the laptops it do format c: and reinstalled new windows.
  I try to do the recovery only by pressing f8 without answering.

  How can I recover my laptop to its state of origin as drive HARD recovery again in d:
  Thanks in adv

  Hello

  You will not be able to restore the factory settings because another operating system has been installed on the first partition.
  Usually by pressing F8 immediately after the laptop has been powered should allow the advanced on-screen menu. Here, you should choose option called repair my computer and Toshiba Recovery HARD drive.

  But if this doesn t work then you will not be able to use HARD drive recovery.
  In this case, you will need to order the new CD from here:

  https://backupmedia.Toshiba.EU/landing.aspx

  Good bye

• Photosmart 7520 (new) Auto Doc feeder does not work screaming loud noise.

  I just bought this new in box of a second party.  He was obviously nine original bag/Ribbon plastic on the entire unit.  Everything works fine but the car doc feeeder on power unit it is that loud screetching noise sounds like there is always a piece of tape somewhere.  I looked everywhere in TI lifted lids etc.  I had several hp printers and scanners with feeders doc auto know so well.  When you try to use the doc feeder it will move a few short clicks then paper error anyway inseterted, when I click to start a second or third time it advances once again very shortly.  I am handy with tools, etc.. Any suggestions?  Maybe it's under warranty even though I'm not 'original '?

  Thank you

  Stem

  Hey Capt-Rod,

  It is quite possible that the printer is under warranty. It is not based on the buyer, but according to the serial number of the printer. Please, either use the following link. Check your product warranty or call HP.

  If you are in the Canada, U.S. dial 800-474-6836 or you can Contact HP worldwide.

  From your description, it seems that you have done the troubleshooting necessary, but please plan to take a look at the following link. HP Photosmart 7520 e-all-in-one printer series - when using the ADF, one "original jam: clear jam and press OK' Message displays on the all-in-one."

  You will find a not just yet, you will need to complete and could very well solve the problem.

  I hope this helps.

• How much noise is expected on 6353 digital output lines?

  I'll send a signal to pass a set of relay reed with the port on a pci-e 6353. When the line is low, the noise is ~ 10 mV. When it is high, the noise is ~ 30-40mV. The noise seems to be done through the signal lines in the reed relays.

  What is the level of noise that is expected?

  I intend to move to electrostatic armoured relay. Meanwhile, the filter mentioned in the manual of 6353 only apply the digital input?

  Thanks for the help

  Hi Nico,

  Here are the results of my 6353 running a DO loop to HAVE (high and low)

  

  So, at the logical level above I see noise on the order of what you described.  Logical low my noise is significantly lower.  I guess it depends really how noisy your mass plan is and what does the Board of Directors, as well as what is connected to it.

  * Edit, I suppose a more legitimate test would be to use an array 2 to measure the output voltage.  I still think that this test has some merit by showing that little noise on the line is not uncommon.

  In any case, since the lines are outputs digital, the spec just says that they must reach TTL voltage levels (< .4v="" for="" a="" logic="" low,="">2.4V to the logic of the top).  I did all the typical numbers for the noise on the lines, but what you see does not seem unreasonable.  Have you tried the bypass capacitors by adding to your relay by chance?

  Best regards