How many joules are required for a mac book pro surge protector?

How m joules are needed in a surge protector to protect my MacBook Pro?

What?  Bolt of lightning?  Power house common 120V to service A 200?  The risk of the source requires more than the MBP.

Houses in the center of Nebraska in the middle of the storm season, in a House that is not a lightning rod to take shots... I would say that leaving the MBP unplugged during severe storms.  And get this lightning rod.

Standard room which only has occasional food drops... not too much protection.

Tags: Notebooks

Similar Questions

  • How many gigabytes of data storage has the new Apple Watch series 2 and how many GB are free for music?

    How many gigabytes of data storage has the new Apple Watch series 2 and how many GB are free for music?

    Hello

    Apple has not yet announced the capacity of storage or the music of Apple Watch series 2 storage limit.

  • SSD hard drive for a 2011 mac book pro

    Suggestions welcomed, I am looking to buy an SSD for my mac book pro 2011.  Are there compatibility issues with an internal 2.5 inch SSD?

    I would start by checking the web site OWC macsales.com. They are good to discuss the problems with specific models.

  • reset password but still open Mac Book Pro

    I forgot the password for my Mac Book Pro.  I have reset my password account iCloud and can't access the account and ping from the laptop through the find my iPhone utility but still get an error saying cela "this account uses an iCloud password to log on."

    Help...

    Hi bmittz,

    I understand that you encounter difficulties logging into your MacBook Pro because you forgot your password. I know it's important to have access to your own devices, so I am pleased to provide you with tips to help with this.

    Read this article we have about resetting your password:

    Change or reset the password of a user account from OS X - Apple support

    Thank you for using communities of Apple Support, cheers!

  • how much is a new battery for mac book pro 13 inch?

    How is a battery for mac book pro 13 inch?

    depends on MacBook Pro you have and if you buy oem or aftermarket. An oem battery is the way to go, after that the markets are proved to be unreliable. I'm to do it the good way market if its all the same. But I have a few experiences where they don't acknowledge or reload. And ive seen have poor performance and cost of life. OEM go from 30ish used with a number low cycle to 70

  • Portege M300 - how many bits are supported by LBA

    Hello

    Anyone know how many bits are supported by LBA? It has 48-bit?

    I need to know if I can get a 120 GB hard drive against a 160 GB for a major upgrade.
    I can't find this information on the toshiba site: is there a changelog BIOS place?

    Thank you

    Yes, as far as I know the LBA (Logical block addressing) use 48-bit.

    Check this box:
    http://www.48bitlba.com/

  • Files which are required for Windows to run properly have been replaced by unrecognized versions

    I get this window popping up that reads, "files required for Windows to run correctly have been replaced by unrecognized versions.»  To maintain system stability, Windows must restore the original versions of these files.  Insert your Windows XP Professional CD2 now. "The problem is that I'm not running XP Professional.  I am running XP Media Edition (do not know what version - when I look at 'System' in the control panel it says version 2002, but the OS disc that came with my computer says version 2005 with update rollup 2).  In any case, I only have an installation disc, and when I insert it, the computer tells me it's the wrong disc.  What should I do?

    God help us all...

    Is the CD you have an XP bootable installation CD authentic or some kind of restore CD provided with your system (they are not the same thing).  If it's a CD of Windows, this Service Pack is on the CD?

    Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

    If the system works, what do you think might have changed since the last time it did not work properly?

    What is your Service Pack installed?  If you are not sure, do the following:

    Click Start, run and enter in the box:

    Msinfo32

    Click on OK and when the system info summary appears, click on Edition, select all, copy, and then paste the results here.

    There will be some personal information (such as the user name and the name of the system), and what appears to be personal information for you, simply delete the personal information of the pasted information.

    When you see a message like this:

    Windows file protection
    Files which are required for Windows to run properly have been replaced by unrecognized versions.  To maintain system stability, Windows must restore the original versions of these files.

    I hope that you are curious to know what is the file and when you know that, you can decide what to do about it.

    You must click Cancel, and then click Yes to keep the file, then you will have an event to watch which will tell you what the problem is the file.

    Search where you sign in to see what is the name of file system Viewer, then decide what to do.

    The event will look something like in this example:

    Event type: Information
    Event source: Windows File Protection
    Event category: no
    Event ID: 64005
    Date: 10/01/2011
    Time: 14:41:56
    Description:
    The protected system file taskmgr.exe had not been restored in its original, valid version because the Windows File Protection restoration process was cancelled by user interaction, user name is Jose.  The file version of the bad file is unknown.

    When you know what the file is, you can decide what to do about it.  There are probably other copies of the files on your system, or you can get the files from another source.

    A shortcut to the event viewer is to click on start, run and enter in the box:

    eventvwr.msc

    Click OK to launch the event viewer.

    Check your event observer system log and look for a proposed Windows file protection event.

    If you double-click on an event, it will open a window of properties with more information.  On the right are black up and down arrow keys to scroll through the open events. The third button that looks like two overlapping pages is used to copy the details of the event in your Windows Clipboard.

    When you find an interesting event that occurred at the time of your question, click on the third button at the top and arrows to copy the details and then you can paste the details (right click, paste or CTRL-V) the text in detail here for analysis.  Remove all personal information from your information after you paste If you are forced to do so.

    P.S. Let us know how you go with these Microsoft KB article suggestions.

  • Problem after installing Windows Service Pack 3 on Windows XP Home edition error Media pc: files which are required for Windows to run properly have been replaced by unknown...

    Original title: problem after installing Windows Service Pack 3 on Windows XP Home Media edition pc

    My pc runs Windows XP Home Media edition.  I installed Windows Service Pack 3 successfully, or so I thought. Whenever I turn on my pc a box opens indicating "files which are required for Windows to run properly have been replaced by unrecognized versions."  To maintain the stability of the system.  Windows must restore the original versions of these files.  Install your Windows XP Professional CD2.  I don't have any Windows XP Professional CD that I use the Home Media Edition. If I press Cancel repeatedly, the window disappears to return with the same information, but ask me to install Windows XP Professional CD3.  How can I stop this happening?

    Hello

    Step 1: I suggest you perform the SFC scan on the computer and check.

    SFC tool scans system files and replaces incorrect versions of system files by using the correct versions.

    To run the System File Checker tool, follow these steps:

    1. Click Start and type cmd in the box start the search.
    2. right click on cmd in the list programs and then click Run as administrator.
    If you are prompted for an administrator password or a confirmation, type your password or click on continue
    3. at the command prompt, type the following line and press ENTER:

    sfc/scannow

    Reference: http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/system_file_checker.mspx?mfr=true

    Step 2: Also, look for error messages in the event viewer. If you find error messages after return the exact error message so that we can help you better.

    Reference:
    Using the event viewer
    http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/snap_event_viewer.mspx?mfr=true

    Understanding of event viewer
    http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/event_overview_01.mspx?mfr=true

    Procedure to view and manage event logs in Event Viewer in Windows XP
    http://support.Microsoft.com/kb/308427

  • How many gadgets is safe for your system?

    How many gadgets is safe for your system? I have 4 GB of ram and wonder how typical gadgets of resources use and if I should limit how often I use.

    Wednesday, December 15, 2010, 01:18:06 + 0000, Lonewolph wrote:
     
     
    > How many gadgets is safe for your system?
     
     
    There is no answer to a question like that. Gadgets are very different
    each other.
     
     
    > I have 4 GB of ram and wonder how typical gadgets of resources use and if I should limit how often I use.
     
     
    Most of the gadgets use no resources at all except when using them.
    They are something like the programs that are installed, but not running.
     

    Ken Blake (MS-MVP)

  • When I buy Adobe ExportPDF, how many users are allowed to use the service?

    I want to buy Adobe ExportPDF for use in Adobe Reader DC for my business, however I'm not sure if an account would cover all of my users. How many users is covered for only one account when you buy it? Is it someone who is signed on the account which is authorized to use the service of domain Adobe Reader controller?

    Thank you

    Hi simonp90362895 ,

    Adobe PDF Export is intended for one person and can not be used by all users in a Department. User who bought the license (subscription) can use this service anywhere in the world, on any computer that has internet.

    The user requires just your login (username and password).

    Yes, the user will have to log in with the credentials of the user who has subscribed to this service in order to access the services of export it to PDF in Acrobat Reader.

    Let us know if you need additional assistance.

    Concerning

    Sarojini

  • I made a mistake. Buy Adobe Premiere elements 13 but BONES badly chosen. Now, I got the Windows version, but I have a Mac. How to transfer my license for the Mac version?

    I made a mistake. Buy Adobe Premiere elements 13 but BONES badly chosen. Now, I got the Windows version, but I have a Mac. How to transfer my license for the Mac version?

    Here's how to swap: order product. Platform, language swap

    but I think that your license is double platform.  Download the mac version and see if your serial number will be activated.  If this isn't the case, at least, you will have the 30 day trial to use while you wait for your platform swap.

    Downloads available:

    Download and installation help links Adobe

    Help download and installation to Prodesigntools links can be found on the most linked pages.  They are essential; especially steps 1, 2 and 3.  If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".

  • How can I transfer contacts from galaxy s4 for Mac book pro?

    I recently bought a Mac book pro 15 ".

    I need to transfer contacts and some files on my new mac.

    How can I do?

    TKS for your help

    Ottavio

    Hey ottaviob,

    If I understand correctly, you want to transfer contacts and other things to your new Mac.
    I recommend you to read this article; It has advice to transfer your contacts, music, photos, documents and more on your Android device. Once the content is on the Mac later at some point if you wish, this article is also not to transfer this content in an iOS device too.

    On a Mac, install Android File Transfer, open it,

    Move content manually on your Android device on your device iOS - Apple Support

    Thank you for using communities of Apple Support. Have a good.

  • How do I backup my Mac Book Pro using disk Seagate Slim Portable for MAC?

    How do I backup my Mac Book Pro using disk Seagate Slim Portable for MAC?

    You can use Apple Time machine app

    Use Time Machine to back up or restore your Mac - Apple Support

  • I have a complaint on my Mac Book Pro. I bought my computer in January 2016 and it has two problems: the first is the display of the retina that has many traces of the keyboard and as many times it freezes. I have looked for help on the local Apple Store

    I have a complaint on my Mac Book Pro. I bought my computer in January 2016 and it has two problems: the first is the display of the retina that has many traces of the keyboard and as many times it freezes. I have looked for help on the local Apple Store and support too, but it did not help. I would like you help me solve this problem.

    Thank you.

    Kelly

    Your machine is still under warranty, so you should take it to your local Apple store for repairs. Function late in January, you bought it, you still have phone without support. If you can't find any help on the Apple Store, then I don't know what you expect to find here. We have no way to check for problems you have described or any additional hardware, etc.

  • How to connect a microphone to capacitor for Mac Book Pro?

    Hi all

    After recently to buy a NW-700 Neewer and set up, I plugged it on my which seems to me to be a model 2012 or 2013 the Mac Book Pro, only to see that he has been received as headphones and tab out of my sound preferences. I don't think that there is something wrong with the microphone as I had also bought and hooked to a phantom power source. After you pass the cables through the power source, I plugged my card TRS in a TRS FosPower additional to the PLUG adapter, knowing that Mac does not accept audio TRS jacks. And then after all that, I plugged this card into my computer which was accepted as a helmet instead of a microphone.

    I have a theory, that the FosPower adapter converts only the input signals and the computer then thought of as a helmet. What do you think?

    Here are some pictures to help.

    The Mic

    Phantom power

    Adapter

    Before the plug-in

    Once the adapter is connected

    Thanks for your help,

    G

    Hi garretthelp,

    I understand that you are having trouble to get your microphone Neewer NW-700 to be recognized as a device on your MacBook Pro.  If the TRS FosPower to adapter PLUG does not work for you, have you tried using an audio interface with standard XLR connections for your audio configuration?    Which application you use on your Mac?  No matter what settings are you using in the Mac system preferences should also be done in the settings of the audio application as well.  I will include information for GarageBand below for your reference.

    I found the Web site of the manufacturer of your product and enter the SKU for the microphone Support page, but they do not have a manual available at the moment.  So, if using an interface standard audio does not resolve the problem, you will need to contact Neewer for more information.

    Plug in a microphone

    You can connect a microphone to your computer to record your voice, an acoustic instrument or any other sound on an audio track in GarageBand. You can connect a microphone to the port of audio input of your computer, a USB port, or, for better audio, an audio interface connected to a FireWire or USB port on your computer. You can also use your computer's built-in microphone to record sound.

    After you connect a microphone, you choose the input source for the range that you want to save in, and then turn eventually followed. Monitoring allows you to hear you play so you can hear the part you want to record as well as the rest of the project.

    Connect a microphone to your computer

    Do one of the following:

    • If you use your computer's built-in microphone, select the Microphone as the source of entry into GarageBand > Preferences > Audio > devices.

    • Plug the microphone on your computer audio input port (if she has a), then choose integrated input as input source of the track.

  • Connect a USB microphone to a USB port on your computer. Choose the USB microphone as input source of the track.

  • Connect an audio interface to a USB or FireWire port, then a microphone for the audio interface for recording.

  • Connect a console audio mixer or console in an audio interface connected to your computer.

  • Set the input for a microphone source

    1. Select the audio track.

    2. Click the Smart Controls to open the smart controls, and then click the Inspector button of .

    3. In the recording settings section, choose one of the following on the shortcut menu of the entry:

      • If you use your computer's built-in microphone, choose the built-in Microphone.

      • If you use a microphone connected to your computer's audio input port, choose built-in input.

        If the integrated entry does not appear in the menu, choose GarageBand > Preferences, click Audio / MIDI, then choose enter integrated in the context menu of the Audio input.

      • If you use a microphone connected to a USB port, select the microphone.

      • If you use a microphone connected to an audio interface, choose the number of the channel for the microphone.

        If channels audio interface do not appear in the menu, choose GarageBand > Preferences, click Audio / MIDI, then choose the audio interface in the context menu of the Audio input.

      Make sure the format matches the microphone or instrument. Choose a mono for monophonic instruments (with a single channel), then a stereo input to stereo devices (with a pair of channels).

    4. Drag the recording level slider to change the level of input to the sound source volume.

      If the recording level slider is dimmed, you cannot change the volume of entry in GarageBand. In this case, use the volume control on the unit.

    Take care

Maybe you are looking for