How much better the partition of the HARD drive for dual boot: Windows 8 and Linux

Hello

I am a newbie in Windows 8, linux, Partition...

I want to use my new laptop with windows 8 pre-installed on the following:

Create a Dual Boot Windows 8 / Ubuntu
Create on my drive C (single disk on my laptop):

* a partition for the system
* one for Windows 8
* one for data and
least for Ubuntu OS

My goal is:

-to install VmWare on Windows 8 and run Splat Checkpoint with virtual machines to make the FCTC laboratories.

to install GNS3 on Ubuntu for CCNP Labs but with GNS3 to access the files in the data partition

I have a Toshiba Satellite with 750 GB and 8 GB of RAM.

According to you, what is the best size for my scores?
Is there a better way to partition my C drive on my goal?

Best regards

I don't know if this is the right section, sorry for that. Feel free to move this thread in the appropriate section *.

I think the size of partitions depends of the you want to use and install other software.
So if you have a lot of software which runs under the Windows System I recommend to choose a larger size to win 8 partition.

However, given that you have a 750 GB HARD drive, you could take 200GB for Win 8, 100 GB to Linux and the rest of the HARD drive size, that you can use for data.

By the way: I found Nice YouTube video how to create a dual boot using 8 Win and Linux http://www.youtube.com/watch?v=E_Yd2jK-7Jg

Welcome them

Tags: Toshiba

Similar Questions

  • How can I partition my hard drive for dual boot Windows 7 and Windows XP?

    I installed Windows 7.  How do I get a partition or virtual hard disk the hardrive and then install a different OS, so that I can dual-boot between 7 and XP?

    I only know of the VHD, 7 has a "virtual machine" option or is a long process that requires a third-party software?

    Not longer than the partitioning of the HARD drive and install XP - actually quite a bit more fast I should think and gives you the ability to move from one OS to the other without having to reboot the machine. You don't need to have enough RAM but... If you find my answer helpful, please click the button "Vote as helpful"! Thank you! My Blog

  • Using BCD for dual boot Windows 7 and Linux on two separate hard disks

    I scoured Internet for weeks and weeks trying to answer this question with still no success whatsoever.

    What I want to know is:

    Is it possible to use the BCD to boot Windows 7 and Linux, with Windows 7 installed on the hard drive of 1 and Linux installed on the hard disk of 2?  If so, how do you prepare in advance Linux, IE Grub must be on the partition root of Linux or should it be on the second hard disk MBR and what are the bcdedit commands necessary to add an entry for Linux for the start menu in Windows 7?

    Could be read more the real problem before burn.

    Someone wants to BCD of Windows to load * since a brooch * for the ACB or MBR on the operating system on the other drive.

    Unless there is a setting BCD undoc, it cannot manage other partitions on the same physical axis starting it is on.
  • How to clear the HARD drive for confidential data before attaching to the third party?

    My HARD drive needs to be fixed and would like to know how to erase confidential data in the HARD drive before giving it to third parties.

    Reformatted would it be sufficient?

    Does anyone have any suggestions?

    Thanks in advance for your suggestions

    The best way in my opinion is using AutoNuke in Dban. Make sure you have the desired data off the drive hard until you execute Dban. Once you run it, it's over.

  • How to reformat the hard drive and do a "clean" install

    A recent virus attack, my computer has lost some files of the operating system.  With the help of the Lim has provided the recovery disk, which offered ' upgrade/repair' or a 'new installation '.  I chose ' install new ', actually I found many of my files are still there - that means that if a virus has escaped "Detection / removal" will always be there.

    Question: How to reformat the hard drive and do a 'fresh install' on a clean hard disk "? ". (I have a drive to Win XP with service pack 3 and a driver disk for the hardware installed on my computer of the regulations.)

    Thanks in advance

    Skip

    Since you have a Dell and a recovery CD and not a recovery Partition, check how many partitions you need by using disk management:

    http://www.theeldergeek.com/disk_management.htm

    In case you have a partition with the operating system and a partition of the utility partition, I would only recommend formatting the partition from the OS. The Partition utility can be very useful.

  • How to clear the hard drive on my old iMac of 2008?

    I have a 2008 iMac I want to recycle. How to clear the hard drive?

    (What is PPC?)

    PPC stands for Power PC. Is the name used to refer to the old Macs that uses a Motorola processor instead of Intel chips used today. To clear your old Mac follow the advice in this document from Apple... What to do before you sell or give away your Mac - Apple Support

  • Office jet pro 8500 a: elimination of printer, was this encrypted model? How to destroy the hard drive?

    This model encrypted?

    If this is not the case, how to destroy the hard drive? Where is the hard drive?

    Hi @Diane47,

    Thanks for joining the Forums of HP Support with your request to printer.

    I understand that you have a HP Officejet Pro 8500 has e-all-in-one printer you plan to elimination and you wonder if the hard disk is encrypted and how to destroy the hard drive. I would like to help with that.

    HP Officejet Pro 8500 has e-all-in-one printer don't have a hard drive. It contains a very small amout of memory, so it can keep in memory the printer and fax settings.

    You can clear the memory by restyoring the printer back to the default values.

    1. on the printer Panel, select Setup.

    2. from the Configuration menu, select Tools.

    3. on the Tools menu, select Restore Factory Defaults.

    HP offers to recycle their products for you. If you want to know more about it, please click here.

    Please let me know if that solves the problem, or if you need assistance.

    Indeed, if this help you to achieve a solution please click the 'accept as Solution' and the 'thumbs up' buttons down below in this message.

    Thank you!

  • Satellite P10 - how to change the HARD drive?

    Hello

    I want to change my Satellite P10 for a bigger HARD drive.
    But I Don t know how to remove the DvD drive.

    On this laptop, I mean that the HARD drive is under the DvD drive.

    Please help me, if you know how to change the HARD drive.

    Welcome them

    Mister_X

    Hi Frank,.

    I'm not too sure about the P10, but on my A30 the hadr drive is under the DVD-ROM. It is secured in place by a single screw (accessible from under the laptop), and when it is deleted the DVD-ROM slides just to place revealing the hard drive.

    The hard drive is fixed with 4 screws (2 on each side)

    HTH

  • Satellite A30 - how to remove the hard drive

    Hi, new here...

    Can someone tell me how to remove the hard drive in my Tosh A30...

    Thank you
    captainp

    Hi Tim,.

    The hard drive on your SA30 is in the optical drive, but slide the optical drive out of its housing (undo the F5 marked screws on the bottom of the laptop).

    The hard drive will be visible fixed with four Phillips head screws that need to be removed (two on each side of the hard drive. With the removed screws, gently slide the hard drive toward the front of the laptop to disconnect its connector and carefully pull it out of its Bay.

    HTH

  • Pavilion ze5730us laptop: how to remove the hard drive of the computer laptop Pavilion ze5730us

    Can anyone tell please how to remove the hard drive of the computer laptop Pavilion ze5730us?  I know its under the keyboard somehow, but I don't know how or where that open.  I could not find this model on YouTube either.

    Thanks in advance for your help.

    D.

    Hello:

    The only manual that I could find is one that covers the ze5600.

    See if it will work for your model too.

    http://h10032.www1.HP.com/CTG/manual/c00246219.PDF

  • How to access the hard drive USB on E3000? Am I missing something?

    I have my router configuration fine to the internet, as well as the media server.  I can't understand how to access the hard drive of my laptop, however.  The manual says to put 192.168.1.1 in the field the address of windows Explorer, but it gives me just the 'Setup' page for the router.

    Am I missing something simple?  I use Windows XP.

    Click on start - go to start > Run/start search and type "\\192.168.1.1" (without the quotes) and press on enter and it should ask the user name and password, the user name and password, use "admin" all lower case, and then click Ok... Now you should be able to see your USB... You must make a right click on it and select "Map network drive" and check the Enable box and below click Finish... It will map the USB on your computer... Once done, you will be able to send and receive data from your computer to the USB...

  • How to remove the hard drive of a laptop the dv4 1444dx

    Hello

    Can someone tell me how to remove the hard drive of a 1444dx dv4 notebook? My laptop does not pass enven boot in safe mode. I tried to let repair system automatic and also tried recovery to a date when the latter worked correctly, but neither translates into success.

    I want to remove the hard drive and save my data before trying to reinstall the original image from the D: drive.

    Thanks for any help you can provide.

    Kind regards.

    Hello

    The procedure to replace the hard drive is detailed from Page 59 of your & Maintenance Guide.

    Kind regards

    DP - K

  • I installed a new hard drive for my dell Inspiron 1525 and try to install windows 7. He asks me to install the driver. How to do it

    I installed a new hard drive for my dell Inspiron 1525 and try to install windows 7. He asks me to install the driver. How to do it

    Using the Dell recovery disks to reinstall?

    The origonal drive failed?

    If you are using a real MS win dvd during the first part of the installation it can not find a drive or ask a driver, then the driver is obtained from Dell, specific to your model, its likely the driver sata, you need to download to say a USB and then point to this file when the installation application the third-party driver.

  • How to monitor the hard drive in labview 8.2

    Hello

    I want to use labview 8.2 program to monitor the hard drive (a folder in the hard drive) for example an application produces a result file in the folder, and then he will be captured by labview program.

    Thank you

    What exactly are you trying to watch? If the file is created? If the file is modified?

    Without resorting to some specific options of the operating system, the only thing you can do is to query file information periodically to see if it has changed. For example, the file Info feature will give you the date change. This same function can be used to check the existence of the file by looking at the error code. Actually, that's exactly what made the VI "check if the file or folder exists.

    If you want a regime more "event-based" then you can try something that is specific to the operating system. For example, on Windows, you can use .NET using FileSystemWatcher class (http://forums.ni.com/t5/tag/FileSystemWatcher/tg-p/board-id/170)

  • Pavilion dv6: I did now the hard drive on my HDD test failed and the pavilion dv6

    The problem is that my laptop when I start it it takes like 10-15 minutes to load.

    I see loading windows xp logo and then he is suspended for more then 10 minutes or more.

    Now, I tried to do a test for the material. I turn on the laptop and click the F2 key and I entered the test screen of hp hardware. I moved start test drive hard and after 5-10 seconds or if stopped with a test failure:

    That's what I see now on the screen of the laptop:

    Test Drive: 1

    INTELLIGENT control: PAST

    DST short: FAILURE

    FAILURE ID: 64WE1A-5BC7Q7-XD003F - 60Q 903

    PRODUCT ID: XE041EA #ABT

    Hard drive 1

    Edit:

    I tried now all the other tests in the F2 screen, and they all went except the short DST hard drive that has failed.

    Better to buy a new hard drive and replace it with this one and I install the new OS on it own?

    Test drive: FAILURE

    Does that mean ID failure? I need to replace with a new hard drive? If so can I buy a new hard drive and replace it only with myself?

    I did no other reviews but I want to first of all understand what it means to id of failure.

    Hello

    The hard drive is faulty defiantly and Yes should not replace. Failure ID is given, so if your laptop is under warranty you can give this to HP and it will then allow you the replacement

    Usually the instructions on how to replace the hard drive are in the manual of your computer that you will be able to get a copy on the HP site. You can also buy the HP installation media which will be operating system files on your for reinstall on the new hard drive.

Maybe you are looking for