How much could I get for a card mother DA0BL3MB6F0?

Hello

just looking for abit of advice on how I could get for a mother of satellite toshiba DA0BL3MB6F0 with all this above example PCI card, 2 x 512 RAM, extractor fan. I looked on the internet already and that you can find these motherboards without all the stuff about it.

would be much appreciated if someone could reply and help me :) Thank you

Post edited by: johnzy

If you want to buy in the store, you will probably get motherboard only. All additional hardware parts you need to order separately. Perhaps on eBay, you can find someone used with RAM inside.

Also check if you can find it under A000011620.
You have Satellite L30/L35?

Tags: Toshiba

Similar Questions

  • How much does it cost for a replacement battery for an iPhone 5

    How much does it cost for a replacement battery for an iPhone 5

    In the United States, $79,00.

    IPhone battery & Power - official Apple Support

  • How much space I need for ios9 (not enough free 5 GB)

    How much space I need for ios9 (not enough free 5 GB)

    You have a computer and you sync via iTunes?

    If you update via iTunes you need not as much free space on your iPad because the software spreads itself by using your computer, not the ipad memory

  • just bought SCAN SNAP supplied with disc of Acrobat, but only for PC, I use a MAC, the serial number of the disk, how to use and get for MAC

    just bought SCAN SNAP supplied with disc of Acrobat, but only for PC, I use a MAC, the serial number of the disk, how to use and get for MAC

    Standard Acrobat's window only; Acrobat pro for mac

  • Currently, I have windows vista, & have heard say that windows 7 is much better. How much is the fee for the upgrade & which anti-spyware do you recommend?

    I have an acer with vista soundcards computer & would like to know if my computer would work better if I downloaded windows 7.  I was crashing regularly lately & keep restarrting my computer.  It is sometimes frustrating.

    I think you'll like Windows 7, easy to adapt to, run faster, less UAC popups.

    However, you should check if there are Windows 7 drivers available for your model, if there then you know its compatible Windows 7.

    Go to the Acer support website and search the Windows 7 drivers for your specific model number.
    http://GD.PanAm.Acer.com/home/

    If there are Windows 7 drivers then download to a folder on your hard drive and burn them on a CD. After you upgrade to Windows 7 install all of them.
    Install the drivers for the card mother/chipset first, then the SATA, LAN, Audio drivers,
    and all the other remaining drivers you downloaded.

    Check the download site of the manufacture of the graphics card for the latest Windows 7 drivers for your card.
    ATI: http://support.amd.com/us/gpudownload/Pages/index.aspx
    NVIDIA: http://www.nvidia.com/Download/index5.aspx?lang=en-us

    J W Stuart: http://www.pagestart.com

  • Drivers Windows 7 x 64 for the card mother Memphis-M

    Hello! I bought the HP Pavilion 500-164er with Linux operating system desktop PC.

    Still, I installed Windows 7 x 64 on this unit, but I couldn't find some drivers for the card mother Memphis-M.

    I need:

    Simple communication controller PCI Chipset, USB 3.0.

    Thank you and waiting for a response.

    Hello:

    You can use the W7 x 64 drivers and software of this model that has the same motherboard as yours.

    DO NOT USE ANY BIOS OR THE FIRMWARE OF THIS MODEL FILES

    http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4063 & LC = on & CC = US & DLC = in & sw_lang = & Product = 7049404 #N543

    Chip set:

    http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=CP-134596-1 & CC = US & DLC = in & LC = on & os = 4063 & Product = 7049404 & sw_lang =

    Comms Simple PCI:

    http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=CP-134614-1 & CC = US & DLC = in & LC = on & os = 4063 & Product = 7049404 & sw_lang =

    USB 3:

    http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=CP-134611-1 & CC = US & DLC = in & LC = on & os = 4063 & Product = 7049404 & sw_lang =

  • I had to get a new card mother and lost of Photoshop CS5.

    I had to get a new card mother and lost of Photoshop CS5.

    I'm going to install and, because it is an upgrade, need CS 4 installed. I can not CS4 to start installation. It fails is there a way to get around this?

    You don't need to install CS4, but do not have your serial number CS4 enter when asked

  • I need to know how much it will cost for a fan and the battrie

    namely that iam a studtent to the iam school was by using one of the notebooks hp because my father was asking someone in the store of the computer on which would be the best for me at school and they said that the hp pavilion g6 it worked well im good summer use for butts a year in year environment I think. When I went to my place a friend when I turn, it says the fan it works well so I got difficulty and something else in it they said I had a guarantee as it was the difficulty and then after that on the second year I used in 6 months I have need of a fan replacement agine and I know not its own all is good condishion after shoot 2 days later I need to say a battrie replayment so now he leaves me with what I'm doing and now I don't have how much it will cost to fix it and iam not rich and it will take some time to pay off I was woundering is there a way to pay he took just a cheap littile but I need to be a bug in top shap and I want to know how much it would cost to add a new GPU which is a littile better and my GPU is great, but I want just a new one I had a VISION of A6 AMD place help

    Ed... Sorry for the comment about your grammar and punctuation. You erased that upward. In any case, we need your exact model number. There are a lot of G6. Look at the bottom of the laptop or in the battery compartment for a number like G6-xxxxaa, where the x are numbers and the letters a. This will allow me to know the exact references you need. Chances are that they are available on eBay Australia. Then we just need to know how we're going to get your new fan installed.

  • How much space is required for Adobe Pro XI disc?

    Get the message that I don't have enough disk space to download Adobe Pro XI, how much room does?

    Hi warringbb,

    Acrobat Pro 11 requires 1.85 GB of available disk space

    Please visit: http://www.adobe.com/products/acrobatpro/tech-specs.html

  • How can I change paypal for credit card payment?

    I would like to change my paypal for credit card payment method.

    We can I change it?

    Hello

    You will not be able to change the payment method paypal to credit card ot vice versa.

    You can cancel your subscription and purchase a new subscription using the method of payment of your choice.

    Cancellation: -.

    Please contact support by calling/chat for cancellation requests and billing queries:

    Contact the customer service

    * Be sure to stay connected with your Adobe ID before accessing the link above *.

    You can also check the help below document:

    https://helpx.Adobe.com/x-productkb/policy-pricing/cancel-membership-subscription.html

    Please go through the Adobe - General conditions of subscription as well.

    Plans:-https://creative.adobe.com/plans

  • HP P6 2120t: possible cards for the card mother Pegatron IPISB-CU on a computer of 2120t HP P6

    So, I'm looking to upgrade my graphics recently. Over the months, I've been looking around and find out a lot about how work cards graphics, and I need to find one. However, what I don't know much about is the compatibility of graphics cards with card mother Pegatron IPISB-CU. I checked and I'm running on FRIEND 7.19 BIOS update 02/04/2012. It seems that I need to look for graphics cards that can work with "Legacy" BIOS. However, it's not not clear that even if I bought one it would work. I was hoping so to ask HP and the community if there was in fact a strong graphics card that would be 100% some works with my motherboard/BIOS card.

    To archive the many discussions of forums, it seems the MSI 750ti ( http://www.newegg.com/Product/Product.aspx?Item=N82E16814127783 & cm_re=msi_750-_-14-127-783-_-Product ) is my best bet because it is said to have a switch making it compatible Legacy Boot. However, read the description of the product, I have not found this mentioned in the features. What scares me.

    If someone could shed some light on what I'm working with. I would be extremely grateful. I'm ready for the possibility that there is no viable option other than buying a new motherboard and the OS, but if I can get away with upgrading my current system I would be very grateful.

    Thanks to all who take the time to read/answer

    Drew

    At the company MSI Web page in the master record for this MSI cardunfortunately didn't even State if power 6-pin PCIe connectors are needed. Also, it does not specify that there a dual BIOS or the old BIOS support. I wouldn't consider this one for your motherboard.

    You may need to upgrade the PSU as your installed PSU doesn't have 6 - pin PCIe connectors with power cable to power the card video update.

    EVGA and Gigabyte are also PCIe x 16 graphics cards with dual BIOS allowing a choice of inheritance or the EFI.

    Cards with BIOS double EVGA

    http://www.EVGA.com/articles/00767/

    I'd take a peek at the r7 of Sapphire Radeon 260 and higher and r9 in the 300 series Radeon cards. In fact, they have a physical switch on the map.

    Sapphire video card specifications

    http://www.sapphiretech.com/catapage_pd.asp?cataid=271 & lang = eng

    What is 100% certainty in the work with your motherboard, you upgrade a ready to use PC or a system as you put as well as components custom, studied and chosen by yourself.

    I suggest you buy your video card with your credit card. If this does not work with your motherboard you can return. Which takes an element of risk fomr away the attempt.

  • How much time to get approved our application in Blackberry World after submit?

    Dear developer,

    Please help me

    Thank you

    respect,

    Fery

    My case is an exception because it is held by the port marathons, launch events and the validation brand team and it is unlikely that the approval of BBW time will be that bad again in the foreseeable future, but here are a few tips:

    • This is the forum where you want to talk about
    • Initial review takes more time, but should not take more than a week
    • If your application processes sensitive data, secure API, etc. The review time will be longer as more people get involved in the review process. BlackBerry takes security very seriously
    • Take the easy road when it comes to brand image, naming, etc., unless you're a bigger project with resources
    • If you do not hear back after 2 weeks, the moderators on the BBW forum bug. They do a great job
    • Updates are usually approved within a day or two
    • Anything that falls outside the usual process will be for ever get solved because there is no clear path to solve the problems and tickets seem to be ignored.
  • how much storage is required for a scheduled backup, if you already have your shadow system recorded in the storage device?

    Hello

    I already asked this question but I am still confused! I have re-installed a W7-64 bit fresh in my desktop HP-computer, the first thing was to burn down an emergency start, the startup disk, and then stored a shadow/system image on a removable pocket of 160 G external support box. I have configured my monthly backups to be stored in this media storage device that shows almost 90Gs by flying over. But when the monthly AutoSave active, it stops, & I get a window saying my camera isn't big enough for a scheduled backup. Correct me if I am wrong but I thought that if you have a shadow of system stored in (an external device like mine). A new scheduled backup is just to refresh the system image w/all other file, program etc... Why do I need more 90Gs for whom? I can't afford an external backup storage, right up there:
    1. is it possible to store scheduled backups on my current internal C: drv? (I am aware of the risks). until I get no additional external storage?
    2. why, simply by making a return for which the OS is looking for new files, software etc... who need to maybe added or put to date him require more Gs to a full backup of the system?

    Hi Alan,

    You are welcome!

    Please keep us informed.

  • How much memory is used for the backup of a computer?

    I use a 500 GB external hard drive to back up my PC regularly. Drive hard internal of my PC is currently using about 100 GB of storage, but when I check my external HD it has used about 450 GB. Why are there so much data on my external hard drive if I only use it to backup my computer system? Should it not be about the same amount of data in the two?

    It depends on the software used for this backup.  Software backup can be put in place to keep a certain number of copies files, or images, it discusses the backup.

  • Concepts: how much writing on disk for a single update

    (I use 10.2.0.5 but I think that this applies to any version)

    After reading lots of documentation on Oracle I started to think how often Oracle 'written' for a single update statement.

    The following is correct?

    For an update statement:
    (1) the original data are written in tables UNDO space
    (2) this is protected by a write first to REDO log
    (3) the new data is written to the table space
    (4) this is also protected by an entry first in the redo log
    (5) after that fills in the redo log, it is copied to an archived log
    (6) at the time of the backup that Archives archiving log is also best once more

    So for a single update, I count at least six entries of the same data?
    It is probably what makes the robust Oracle.

    user12204556 wrote:
    (I use 10.2.0.5 but I think that this applies to any version)

    After reading lots of documentation on Oracle I started to think how often Oracle 'written' for a single update statement.

    The following is correct?

    For an update statement:
    (1) the original data are written in tables UNDO space

    Yes

    (2) this is protected by a write first to REDO log

    Yes

    (3) the new data is written to the table space

    No, your data still haven't write (immediately) to datafiles (your tablespaces logically). When point of control (when manually to CHANGE the point of VERIFICATION SYSTEM, SWITCH of NEWSPAPER, when the buffer cache is full, STOP IMMEDIATELY in backup database tablespace mode) then your blocks of data will apply to data files.

    (4) this is also protected by an entry first in the redo log

    Yes

    (5) after that fills in the redo log, it is copied to an archived log

    YesIn ARCHIVELOG mode()

    (6) at the time of the backup that Archives archiving log is also best once more

    YES.

    So for a single update, I count at least six entries of the same data?

    These are not same data! This is the mechanism of oracle database. Cancel the information generated immediately and ensure uniformity reading (to restore). Redo information just, contain no information. It comes to redo change agent who used methods of recovery (media and instance) and finally your data updates do not immediately write data by DBWR because files there is reason of performance.

Maybe you are looking for