How old, a driver can be used with the USB-GPIB controller?

Similar Questions

• Hi I have a new Apple Watch - sport Strip. Is it possible to buy separately strips that can be used with the watch?

  Hi I got a new Apple Watch as a gift at Christmas - sport band, white, 42 mm. 7000 series. Since this is my first Apple Watch, I wonder if I should check all options at the store before opening the box. Is it possible to buy separately strips that can be used with the watch?  Thank you, in advance, for any advice, guidance, you can offer the wisdom.

  Hi, Kate

  Yes - any band Apple Watch 42 mm fits your Apple Watch.

  Non-Sport bands have different lengths, then check the circumference of your wrist and see Apple Watch Sizing Guide (that compares all the Apple strips) before you buy separate bands:

  http://www.Apple.com/shop/watch/Sizing-Guide

  Try them in an Apple Store, it's also a great option.

  The Sport of Apple Watch also has an anodized aluminum housing, while the non-sport bands have different metals of cards and/or links (this does not affect the compatibility, only appearance).

  Information on how to pass the tapes: change your Apple Watch band - Apple Support

• What is the first version of labview can be used with a USB-6001

  What is the first version of Labview, which can be used with a USB-6001?

  According to the user's Guide, you must DAQmx 9.9 or later version.  The oldest version of support DAQmx 9.9 is LabVIEW 2010 (DAQmx and LabVIEW version compatibility).

• Messaging Instant Lync can be used with the Hosted Exchange mail server?

  Messaging Instant Lync can be used with the Hosted Exchange mail server? Let me rephrase the question. As everyone knows already Lync messenger is used with Office 365, but can be used with the same way hosted exchange server, it is used with Office 365?

  You will find support for MS Lync in these forums-online http://social.technet.microsoft.com/Forums/en-us/category/ocs

• MouseCursorData can be used with the SDK 3.6?

  Hello!

  playerglobal.swc in the title of 'libs/Player/10' has been substituted for the one under "libs/player/10.2".

  -target-player has been defined in 10.2.0.

  When you use MouseCursorData, there is no error in compilation.

  However, when running or debugging the application Exception occurs.

  VerifyError: Error #1014: class not found flash. ui::MouseCursorData.

  playerglobal.swc for flash player 11 can be used with the SDK 3.6.

  the value target-Player 11.0.0.

• IBM Thinkpad message: 'this machine can run faster with the USB 2.0 hub.

  Original title: Thinkpad USB 2.0 Hub.

  Hello:

  I have an IBM Thinkpad T-21 which is under Ubuntu & Windows xp.  I primarily use Windows XP.  The pop-up that keeps occurring is "this machine can run faster with the USB 2.0 hub.  Can you tell me how to upgrade my USB 2.0 Hub?  Would like to know because I can't sync my Android phone with my computer until I do it. Thank you.

  Are you sure you copied this error message properly?  In other words, he says that the hub could perform better if connected to a USB 2.0 port?  As far as I can determine that the T21 is not come with a USB 2.0 port, even if you connect a USB 2.0 device (for example a hub), the unit will only race as fast as the port allows it.

  What is the brand and model of your terminal?

  It is possible that the message means the opposite (i.e., your computer has a USB 2.0 port, but the hub is only a USB 1.1 device).

  USB 2.0 was introduced in 2001, so if you bought your computer before 2001, it is likely that you use USB 1.1 or 1.0.

  Open the Device Manager (start > run > devmgmt.msc > OK)
  Expand the category of 'USB Bus controllers'.
  If you see the "Enhanced" work for one or more of the listed devices, you have a USB 2.0 port.  If you do not see "Enhanced", you have USB 1.1.

  

  If the problem is that the USB port on the computer is not 2.0, so your only solution is to buy a USB 2.0 PC Card adapter.  Example and example 2
  If the problem is that the hub is not 2.0, then you will need to buy a new hub.

• BlackBerry smartphones can not synchronize with the USB cable plugged into charge pod

  Hello

  I read on the web site of shopblackberry.com, in the details of charge pod ( http://www.shopblackberry.com/_blackberryaccessories/cgi-bin/pd.cgi?frompage=category&page=product_d... ) that the pod can handset with charger travel or data cable for charge and/or sync with a BlackBerry smartphone. So, my question is related on a problem or a misunderstanding of me to this description.

  I want to know if we could recharge and synchronize the BlackBerry via USB cable or is only responsible for the BlackBerry when connected that way. My second question is, is it possible to synchronize the BlackBerry with the USB cable plugged into the pod or not?

  Because I got a request from one of my users about the fact that his BlackBerry 9000 can not synchronize when it is on his group.

  Thank you very much!

  Hello

  It's a loading dock. It is useful, because just drag you your "BOLD" in there and it will load (just like the 8300 Curve).
  If you want to synchronize, you can plug a usb on the side of the appliance cord. This can be done while the machine is in its dock, where the description.

  I have the same crib, but for the 8300. It's really worth buying. I'm happy with it every day.

• What replacement hard drives can be used by the HPE - 480 t?

  I have a HPE - 480 t who had 2 Seagate 750 GB hard drives (7200.12) in a Raid 0 configuration.  A hard drive has stopped working.  I need to replace the two hard drives.  I'd rather have enough space to put 1.3 TB of data on one disc so I could put the new disks in RAID 1 (mirror).

  I ordered and installed two Segate 2 TB disks (7200.14).  When I use Symaantec System Recovery to recover a point of well known recovery (*.v2i) OR when I do a hand of WIndows 7 install, I get the material errors.  After restarting the machine after doing a system recovery, Windows starts in safe mode hangs at classpnp.sys.  A hand of Windows 7 installation error "Windows cannot be installed on this material.

  Please let me know what I can use to get this machine running hard drives!  I'm desperate!

  Thank you!

  A usb key with a lot more capacity can not be recognized as an option to boot your PC.

  Consider using a smaller in the range of 4 to 8 GB to create a Windows Installer with the download USB\DVD tool.

  Unfortunately, your PC is one of few wthat is a simulator of BIOS, I can't access.

  Best regards

  ERICO

• I recently got an iPad Pro with the intelligent keyboard. Is there another case, that it can be used with the smart keyboard for more protection?

  Is there something else that can be used in conjunction with the smart keyboard from Apple for my iPad Pro?

  What about the back/rear of Apple/cover for iPad Pro?

  http://www.Apple.com/shop/product/MK0D2ZM/A/iPad-Pro-silicone-case-charcoal-gray? FNODE = 9 a.

• BlackBerry redirector Smartphones can be used with the storm?

  Ok... I'm still trying to understand why BB does not settings IMAP be settled and have got no where a solution.

  ....  I understand that redirector might work.  However, I do not have any software 'redirect' available on the CD provided with the phone (or the Desktop Manager).  I have a few very simple questions:

  -Redirector Will work with only an MS Outlook client?

  - Or do I have Exchange?

  -Must have the BES as well?

  -Redirector should be on the disk?  If not, why?

  -All recent versions of the redirector will work with the storm?

  -You will discover the meaning of life in a baseball game?

  (okay, I can live without a final answer...)

  Doekim

  1. redirector will work if you use microsoft exchange

  2. you must have Exchange

  3. do you don't need BES

  4. the right question, I think you need the latest verision

  5. of course, as long as you are a Sox fan, MVP POUSSIEREUX!

• HP color laserjet cm2320nf mfp (ff3be2) can be networked with the USB wireless adapter?

  Howdy, first post here - rules of noob.  Search for as well as I could but have not seen this answered.  Recently, we changed the place of our home network router.  We cannot reach our hp color laserjet cm2320nf mfp (ff3be2) Ethernet cable not more.  You ask if we give a wireless (Wifi, no bluetooth) to USB adapter to the USB port of the printer, will be the printer network through it?  Sure it works on computers, but don't know if the printer will look network via the USB port.  In any case, the problem we are trying to solve becomes the printer on our network of origin when we can not connect it via Ethernet.  Thanks in advance.

  Thanks for the reply.  Yes, I thought that I understood that after doing some more than browse the Internet.  Just ordered the Ethernet of IOGEAR Universal for adapter Wi - Fi N.  Hoping that the printer will think it is plugged.  Should do based on what I've read.  Thank you, James.

• The 1473R CAN be used with the real-time operating system of NOR?

  Hello, I am trying to determine if I can use the OR 1473R framegrabber PCIe FPGA in a PC based computer time real OS OR. Anyone know if this is possible? So I think that it should appear to the OS in real-time as a target FPGA that can transfer the data via DMA, but I wanted to make sure the drivers would work in real time of NEITHER.

  I appreciate any info on this!

  lukepike,

  Yes, you can use this device with real-time OS of NOR.

• A force/torque ATI sensor can be used with the PXI-7358?

  I have a PXI-7358 Controller card and I am looking for a Mini40 of ATI force/torque sensor (Manual: http://www.ati-ia.com/app_content/documents/9610-05-1017%20DAQ.pdf).

  Force sensor manual said I need to use a data OR M or E-series series capture card. The sensor output force seems to be an analog voltage on a 68 connector pins. I know that the PXI-7358 has a few analog inputs, but less than 68. Does anyone know if the PXI-7358 is possible to work with this force sensor?

  Or, what is a good PXI DAQ card that will work with this force sensor?

  Thank you.

  Hi MatthewG,

  You will need some sort of escape to separate the stems which are the analog output pins of the torque sensor.  Once you have that, you can use the 7358, also with an escape, to connect the two.

• Dell Caddy tray part number: N6747 can be used with the hard disk Power Edge 840 cage.

  I have the hard drive Dell 840 cage and want to buy some caddy tray. I do not know caddy number part of the plateau of the N6747 can be support for Cage Rack on Power Edge 840.

  Thank you.

  D962C for D981C for SAS and SATA part number are what you want.

• In how many hearing devices can be installed with the same license?

  If I pay for the license 1 year, can I install Adobe Audition in various devices, like my PC and my laptop, using my account? Or I have to pay twice?

  The standard single-user license allows two activations, so you can have one on a DAW and the other on a laptop.