How Oracle 'row_limiting_clause' for the number of lines. percent for HUNDRED lines works in Oracle 12 c?

Similar Questions

• [ADF 11.1.1.4.0] How to know selected the number of lines without writing a bean

  How to know the number of lines selected in ADF Table with EL Expression. We have estimatedRowCount (which gives the number of rows in the table) but I use cases where I want to activate a button (lets say 'Show' button) only when the selected row counts is '1' (not less or more) without writing ManagedBean.

  You can follow my previous suggestion with a little change in the EL IE, without backing bean comes directly set table in the backingBeanScope instance.

  For example.
  #{! (backingBeanScope.t1.selectedRowKeys.size eq 1)} (notice no backing_table)

  and bind the table binding property #{backingBeanScope.t1}

  With the above code, there is no need to have a bean reinforcement or all java code, table instance will be called directly from backingBeanScope

  Sample:

  
  .
  .
  
  
     
  

  Jean Lou

• Get the number of lines to different tables on the same line

  How can I get the number of lines for the different tables in a single line:
  
  SELECT count (A), count (B), count (C) table tb_a A, tb_b B, tb_c C;
  
  Thank you!

  Maybe if you want a little sophisticated look ;)

  select *
    from (select 'a' tbl_name,count(*) cnt
            from table_a
          union all
          select 'b' tbl_name,count(*) cnt
            from table_b
          union all
          select 'c' tbl_name,count(*) cnt
            from table_c
         )
   pivot (max(cnt) kount for tbl_name in ('a' as tbl_a,'b' as tbl_b,'c' as tbl_c))
  

  Concerning

  Etbin

• BI Publisher - how to display the number of lines displayed at the bottom of the table on each page

  Hello

  We are the conversion reports Actuate BEEP and not able to understand how to view "Accum.Total = < n >" at the bottom of each page. In the attached report to operate it, "Accum.Total = < n >" must be displayed at the bottom of each page where < n > is the number of lines displayed on the current page and previous page.
  
  For example, if there are 10 rows in the result set, if the 1st page displays 4 rows, 2nd page displays 3 rows and 3rd page is 3 lines and then Accum.Total = 4 on page 1, Accum.Total = 7 on page 2 and Accum.Total = 10 on page 3.
  
  Note that we use the property table "allow the lines to break Pages = False" as we do not want a specific line can be split across pages.
  
  I enclose a sample of report actuate, rtf, BEEP and XML report for testing file.
  
  Approach used so far-
  
  1 > I tried to put the counter in the footer, but it seems that only the fields that come directly from the IC can be used on the header/footer. No matter what form text field or variables defined in the report.
  
  2 > I used approach given in the link below. Using this approach, I am able to view a coded value hard at the bottom of every page (just below the table) but his does not work for the variable (in my case the counter c1).
  
  https://blogs.oracle.com/xmlpublisher/entry/continued
  
  3 > on Google, I found a few articles on the page break conditionally as display only certain numbers on a page or the page by section break but in our case, its dynamics and its number of lines to display on a page is driven by data, so I could not think of a certain condition to use in "Condition." ": If" for use as a page break.
  
  Thank you

  Richa
  

  Watch see the-Report

  http://docs.Oracle.com/CD/E28280_01/bi.1111/e22254/create_rtf_tmpl.htm#do_bf_cf

  Download the https://blogs.oracle.com/xmlpublisher/entry/continued sample

  Add

  <>

  name = "contd_footer".

  format = "99G999G999" / >

  After the field "Footer."

  If need to use a footer to display the meter then and sous-modèle with code above and call it in footer

• How to count the number or lines in the file

  Hi Experts,
  
  I'm file as source and Oracle as target. My folder that contains some data that will load the target.
  My requirement is that I want to count the number of lines that contains my folder. Please help me how to count the total number of lines in the file.
  
  
  THX,
  Sara.

  Hi Sahaveda,

  Now, I tried and it works.

  Sorry my mistake again.

  I created HR. ETL_FILE_LOG as below:

  CREATE THE TABLE HR. ETL_FILE_LOG (numero_fichier varchar2 (10))

  Below the code will run without error:

  import java.lang as lang

  import java.sql SQL

  import of java.lang.String

  Import os

  disadvantages is sql. DriverManager.getConnection ("<%=snpRef.getInfo("DEST_JAVA_URL")%>", "<%=snpRef.getInfo("DEST_USER_NAME")%>", "<%=snpRef.getInfo("DEST_PASS")%>")

  dblinks = cons.createStatement)

  File1 = Open ('c:\EMP.txt','r')

  Count = 0

  Line = file1. ReadLine()

  all online! ='' :

  Count += 1

  Line = file1. ReadLine()

  File1. Close()

  sqlQuery = "insert into HR. "The values of ETL_FILE_LOG (numero_fichier) (" + str (count) + ' ") '.

  rqQuery = dblinks.execute (sqlQuery)

  jerks. Close()

  Concerning

• How to find the number of lines in the content of the text?

  Hi all

  I have a multi line text element. I want to know the number of lines in a text element? How can I do?

  Note that all lines end with the SHIFT + ENTER.

  Example,

  It is a

  sample.

  After the line there is a there is (SHIFT + ENTER).

  Thanks for any help.

  Whenever the user enters the shift-enter, Photoshop inserts a control [EOT] (end of text) (\x03 or \u0003) character in the string.

  Also, in order to divide the text according to multiple separators in a single call, it is necessary to use a regular expression instead of a string.

  Try replacing:

  var theArray = theText.split("\r");
  

  with:

  var theArray = theText.split(/[\u0003\r]/);
  

  BTW, you can improve performance by explicitly asking the textKey for the current object of the layer property.

  Try using:

     ref.putProperty( charIDToTypeID("Prpr"), stringIDToTypeID("textKey") );
     ref.putEnumerated( charIDToTypeID("Lyr "), charIDToTypeID("Ordn"), charIDToTypeID("Trgt") );
  

  Instead of:

     ref.putEnumerated( charIDToTypeID("Lyr "), charIDToTypeID("Ordn"), charIDToTypeID("Trgt") );
  

  HTH...

• How to get the number of lines in a region of report

  Hi all
  
  Is there a way to get the number of rows returned in a report region, without issuing an another 'select count (*) from une_table?
  I mean something like the substitution string #ROW_NUM # but for the total of the lines.
  
  Thank you
  
  Pedro.

  http://download.Oracle.com/docs/CD/E17556_01/doc/user.40/e15517/UI.htm#CHDDGGEG

  For parts of classic report, the footer region supports the following substitution strings:

  #ROWS_FETCHED # indicates the number of lines read by the reporting engine Oracle Application Express (the size of the page). You can use these substitution strings to display messages to the user. For example:

  Read #ROWS_FETCHED # #TIMING # seconds lines.

  * #TOTAL_ROWS # displays the total number of rows that satisfy an SQL query used for a report.

  #FIRST_ROW_FETCHED # and #LAST_ROW_FETCHED # show the range of displayed lines. For example:

  Until #FIRST_ROW_FETCHED # by #LAST_ROW_FETCHED # of #ROWS_FETCHED # displayed >

  Van
  Trent

• How can I fix the height of the datagrid advance according to the number of lines.

  Hello

  I have a datagrid move with a few lines in it. But the height of the grid is higher than the number of lines... How can I fix the height number of lines. That is, if the number of lines is 5 then the height shall be determined in accordance with that.

  Can someone please tell me a solution for this.

  Thank you

  Suma.

  Set rowCount is equal to the length of the dataProvider:

  [Bindable]
  private var dpFlat:ArrayCollection = new ArrayCollection([
    {Region:"Southwest", Territory:"Arizona",
        Territory_Rep:"Barbara Jennings", Actual:38865, Estimate:40000},
    {Region:"Southwest", Territory:"Arizona",
        Territory_Rep:"Dana Binn", Actual:29885, Estimate:30000},
    {Region:"Southwest", Territory:"Central California",
        Territory_Rep:"Joe Smith", Actual:29134, Estimate:30000},
    {Region:"Southwest", Territory:"Nevada",
        Territory_Rep:"Bethany Pittman", Actual:52888, Estimate:45000},
    {Region:"Southwest", Territory:"Northern California",
        Territory_Rep:"Lauren Ipsum", Actual:38805, Estimate:40000},
    {Region:"Southwest", Territory:"Northern California",
        Territory_Rep:"T.R. Smith", Actual:55498, Estimate:40000},
    {Region:"Southwest", Territory:"Southern California",
        Territory_Rep:"Alice Treu", Actual:44985, Estimate:45000},
    {Region:"Southwest", Territory:"Southern California",
        Territory_Rep:"Jane Grove", Actual:44913, Estimate:45000}
  ]);
  

  If this post answers your question or assistance, please mark it as such. Thank you!

  http://www.stardustsystems.com
  Adobe Flex development and Support Services

• How can I find the number of pixels is in my photos of the ipad? I sell on ebay and they have new requirements for the photos. 500 pixels on the longest side. Is it possible to increase the pixels on already took pictures?

  How can I find the number of pixels is in my photos of the ipad? I sell on ebay and they have new requirements for the photos. 500 pixels on the longest side. Is it possible to increase the pixels on already took pictures?

  See if this application works for you > https://itunes.apple.com/us/app/image-size/id670766542?mt=8

• How to increase the number of lines 'forward '.

  The number of lines to allow me to "pass" the address elements recently reduced to only 4. Previously, I had an endless places in which to place the forwarding addresses.

  Firefox send an e-mail, it's strictly a web browser.

  If you use Firefox to access your e-mail, you use "webmail". You must seek assistance from your service provider or a forum for this service.

  If your problem is with Mozilla Thunderbird, let know us and we can move this thread to the queue of Thunderbird. This issue is currently in the queue of Firefox to get answers.

• How can I know the number of columns and lines on excel file

  How reading the number of columns and rows on an excel file after you open the file in excel with ActiveX.

  Using the example of excel200dem, I read that the file data is excellent.

  However, in this example, I just give the number of lines and columns.

  I want to know the number of lines and columns not giving those in C code automatically.

  Who knows this things? -?

  Help me please.

  Hello

  (1) this forum provides a search option, you must use in doing so, you will find this post

  (2) don't solve you your earlier questions? If so, you must mark responses that have helped you find a solution.

• How to limit the number of line TextArea

  Hello
  
  I want to set the number of line TextArea to 1 initially. And I want the number of rows to grow dynamically as the user inserts "entry".
  I could do it in javafx 1.3 with the lines property, in javafx 2.0 who disappeared. I tried to use the setPrefRowCount (.) but it does nothing (I guess because it's just a preferred setting).
  
  How can I achieve this in javafx2.0?
  
  Thanks in advance,
  Pedro Duque Vieira

  Nice workaround.

  I think that this problem is fixed in 2.0.2, however: see http://javafx-jira.kenai.com/browse/RT-16827

• How to control the number of lines of text below the image in the slideshow module?

  Lightroom 3.3

  How to control the number of lines of text below the image in the slideshow module?  I have an image with 36 words in the caption field which exports like two lines GOOD.!  I have another image with 57 words in the field of legend who runs the page and shows only a VERY BAD line.  With 57 words I can't do the single-line text box small enough to keep the text does not spread out of the page.

  Ideas?

  On the Mac platform and I expect similar under Windows, just hit enter or return key will not help. Instead, you will have to hit the keys Ctrl + Enter or Ctrl + return. This forces a new line. Windows may use a different modifier key. The screenshot below shows that it is possible. Unfortunately, you need to add the text via the caption or Description field in the library module.

  

• How to set the number of lines displayed in a classic report when running?

  Hello
  
  Our client has several hardware configuration standard customer and want to allow end-users to choose their 'view profile' at the time of the connection. This "display profile" would contain some predefined values for these configurations material and supposed to give various parameters that must set the number of lines displayed in a classic regional report.
  
  I tried to provide parameters on the report of the region, but he has refused to accept anything other than numeric values. Is it possible to do?
  
  Best regards, Tamas

  The link is about the closest correlate in the documentation to the description of the attribute Number of Rows (point) .

  Looks like you tried to write - in vain - a name string or change of item in the attribute Number of Rows . The attribute Number of Rows (point) is the one that can actually do. For a list of items in the application, click the icon of the flashlight next to her.

• How do to display the number of rows Inserted/deleted etc. in PL/SQL

  In Oracle 10 g PL/SQL, I have a delete statement in a stored procedure. This isn't in a cursor. I want to see the number of lines that I deleted. I can use dbms_output.put_line package. I should know this, but I don't have time to perfect syntax. How do I get the number of rows that are deleted and the display via dbms_output.put_lline?

  For example:

  set serveroutput on
  
  begin
  
     delete  dept;
  
     dbms_output.put_line(sql%rowcount);
  
  end;
  /  
  

  Miguel