How should I try to reinstall an update if I receive an "update for windows vista securtity" cannot install?

Similar Questions

• A security update for windows THAT XP cannot install (KB2707511). Code received the error 0x80076BE. How to install this update?

  A security update for windows THAT XP cannot install (KB2707511). Code received the error 0x80076BE. How to install this update?

  Hello

   
  You are able to install other updates successfully?
   
  See the methods mentioned below and check if that helps.
   
  Method 1: Temporarily disable the security software.

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 2: put the computer in a clean boot state to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State
  
  http://support.Microsoft.com/kb/310353

  Note: After completing the troubleshooting steps in the clean boot, follow steps to configure Windows to a Normal startup State of the link section to return the computer to a Normal startup mode.

  Method 3: Follow the steps in the article.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058
  Method 4:
   
  You cannot install updates from Windows Update, Microsoft Update, or by using the auto update after a repair of Windows XP after installing Windows XP SP3 immediately after a clean installation of Windows XP SP2 or
  http://support.Microsoft.com/kb/943144
  Hope this information helps.

• A security update cumulative for the ActiveX for Windows Vista (KB973346) cannot install stop bits since 15 July 09

  Hello

  I am using Vista Home Basic, but receive an error code:

  A security update cumulative for the stop bits ActiveX for Windows Vista (KB973346)

  Installation date:? 22 /? 08 /? 2009 12:32

  Installation status: failed

  Error details: Code 80242FFF

  Update type: Important

  Security issues have been identified in ActiveX controls that could allow a malicious user to compromise a system running Microsoft Internet Explorer and to gain control. You can protect your system by installing this update from Microsoft. After you install this item, you may have to restart your computer. This update is provided and authorized under the Windows Vista license terms.

  More information:
  http://go.Microsoft.com/fwlink/?LinkId=157386

  Help and Support:
  http://support.Microsoft.com

  Help, please?

  Thank you

  Hi Someonez,

  Error code 80242FFF means ' unexpected update generic Manager failed.
  So, I think that your windows update client could be damaged.

  Try to run the application on the following url fixit.
  http://support.microsoft.com/kb/971058

  Kind regards
  DFT IM me -TWiTTer: @DFTER

• Update for Internet Explorer 8 Compatibility mode list for Windows Vista (KB982632) cannot install with the error details: Code 80070490 & also update for Windows Vista (KB981793) with the details of the error: Code 80070490

  I am running windows vista Home premium, on a system 32-bit HP Pavilion dv9700 op.  I have internet project 8 service pack 2 of windows and norton security suite installed on my computer.  I do not understand why these 2 updates keep do not install unless it didn't, but they are listed under important updates in the windows updates, can you please help me, maybe I don't have not enough memory on the left?

  Thank you!

  Windows Update error 80070490

  If you receive the Windows Update 80070490 error, it means that a file (CBS Manifest) that is needed to install updates is corrupt. To correct this problem, you will need to repairWindows. RepairingWindows will not damage your personal files or the programs that are installed on your computer.

  The System Update Readiness Tool for Windows can correct some conditions that causeWindows Update error 80070490. You can access and run this tool by reading this http://support.microsoft.com/kb/947821 on the Microsoft Web site.

  If the system update readiness tool solves the problem, you need to repairWindows. RepairingWindows will not damage your personal files or the programs that are installed on your computer.

  Once you have completed the repair, you will need to restart Windows Update to install updates are not included on the installation DVD. RepairWindows, follow these steps:

  1. Close all programs and restart your computer.

  2. Insert the DVD into your disc drive. Wait for the installer to start. If the installation program does not start automatically, follow these steps:

     1. Click on start and type Drive: \setup.exe in the search box. ReplaceDrive with the letter of the DVD drive of your computer (for example, D:\setup.exe).

     2. List programs, click Setup.exe.

  3. Click on install now.

  4. Click go online to get the latest updates for installation (recommended).

  5. If you are prompted to do this, type the Windows product key.

  6. What type of installation you want? window, click upgrade.

  7. Once the installation is complete, restart your computer, and then run Windows Update.

  If this post can help solve your problem, please click the 'Mark as answer"If you find it useful, mark it as useful by clicking the 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• How can I download CS6 13.0 update for Windows 7?

  How can I download CS6 13.0 update for Windows 7? I installed CS5 and have the serial number for the 13.0 update. I tried to download this site CS6: https://helpx.adobe.com/x-productkb/policy-pricing/cs6-product-downloads.html, but a window pops up saying it is a unsupported file type.

  You can also download the demo version of the software through the page linked below and then use your current serial number to activate it.

  Don't forget to follow the steps described in the Note: very important Instructions in the section on the pages of this site download and have cookies turned on in your browser, otherwise the download will not work correctly.

  CS6: http://prodesigntools.com/adobe-cs6-direct-download-links.html

• Unable to download the update for Windows Vista

  Try to download the update for Windows Vista 28. MB (big enough file) download also refers to "KB980248.  He continues to show "failed" and "errors found." 'code 80070017' never had problems to download the updates of windows before.

  0 X 80070017-2147024873 - ERROR_CRC
  Data error (cyclic redundancy check).

  The file is damaged or you need clean temporary files on the hard drive, etc.

  Have you tried a manual download of the update in question?

  Search for a download
  http://www.Microsoft.com/downloads/search.aspx?displaylang=en

• Error Code 80070490 Security Update for Windows Vista (KB967723)

  When you try to download the update for Windows Vista (KB967723) security it crashes and I get an error code 80070490.  This runs on Toshiba T9400 laptop computer running Windows Vista

  http://support.Microsoft.com/kb/958044

  You receive an error code "0 x 80070490" when you use Microsoft Update or Windows Update Web sites to install updates

  For Windows Update issues:

  Windows Update Forum:

  It comes with Vista, upgrade install and activate Forum.

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• Error 80070570 code when you try to install the update for Windows Vista for x 64-based systems (KB972145)

  I'm unable to install the update for Windows Vista for x 64-based systems (KB972145).  Whenever I try, I get the error code 80070570.

  0 X 80070570 - ERROR_FILE_CORRUPT
  The file or directory is corrupted and unreadable.

  Perhaps it is the update itself that is corrupted, try to manually download and install the same:
  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=4633c489-A128-441F-803a-d0623edb5667&displaylang=en

  If this does not work maybe reset - WU
  http://support.Microsoft.com/kb/971058/en-us
  How to reset the Windows Update components?

  Harold Horne / TaurArian [MVP] 2005-2011. The information has been provided * being * with no guarantee or warranty.

• details of error: code 80071a 91 when you try to install the 'a security update for windows vista (kb2855844).

  details of error: code 80071a 91 when you try to install the 'a security update for windows vista (kb2855844).

  does anyone know how to go beyond this error?

  Thank you.

  Moved from Vista to install, upgrade and activate Forum.

  Take a look at this thread:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update/unable-to-install-updates-getting-error-code/27a21977-F964-4376-BFAB-2f29ea127c6a

• I downloaded and installed and updated for Windows Vista Ultimate Edition. I have received a warning that a file is missing or damaged. What's past and how to fix my computer running again?

  I have my computer set up to warn me about available updates.  I downloaded the update for Windows Vista Edition full and proceeded with the installation.  To restart my computer, I receive a message that a file is missing or damaged and reinstall drive does nothing.  I bought the computer from a colleague about 3 years ago and until recently just used it to play DVDs and music.   In July, my son set up a wireless network I can use internet on this computer and my main on a floor.  What happened and how do I get my second working computer?    File: ntoskrn1.exe, status: 0xc0000098.

  Hello

  I suggest you to refer to this link and check if it helps: http://social.technet.microsoft.com/forums/en-US/itprovistasp/thread/4dc56ab0-3db9-4ff0-b156-864394fe6c04/

  It will be useful.

• Code 80072EE2 error when I try to update the update for Windows Vista (KB972145) tried to install on a week help someone?

  Code 80072EE2 error when I try to update the update for Windows Vista (KB972145) tried to install on a week help someone?

  sweetcheeks,

  0x80072EE2 ERROR_INTERNET_TIMEOUT http://support.microsoft.com/kb/836941/en-us

• How can I make sure after failing the first time, that update for Windows Vista (KB973687) has finally installed successfully?

  I did an update for Windows Vista Service Pack 2 and it has failed with an error code of 80070026. How can I check and see if this update might have gotten resloved?

  Go to start > run > type

  winver

  Click OK

  What Service Pack are told it is installed?

  UTC/GMT is 19:41 Tuesday, January 10, 2012

• Update for windows vista that KB971029 download what should I do

  I want to upgrade to windows 7, but if I don't have the update intalled, it will not intall windows 7

  Hello
   
  1. are you able to download on the internet or not able to install on your computer?
  2. what happens when you try to download?
  3 do you have problems with the update to Windows 7 upgrade?
   
   
  Step 1:
  If you are not able to download it on the internet, try to download from the link below:
  Update for Windows Vista (KB971029):
  http://www.Microsoft.com/download/en/details.aspx?ID=12314
   
  Step 2:
  Once the download is complete, I suggest you to put the computer in a starting state in minimum mode and then install the update.
  Clean boot: here is the link:
  http://support.Microsoft.com/kb/929135
   
  Note: When you're done to diagnose, follow step 7 in the article to start on normal startup.
  
  For more information, see the following articles:
  Upgrade Windows Vista to Windows 7:
  http://Windows.Microsoft.com/en-us/Windows7/help/upgrading-from-Windows-Vista-to-Windows-7
  Update of the Autorun in Windows feature
  http://support.Microsoft.com/kb/971029

• Cumulative update for Windows Vista...

  There are several updates, called "Cumulative Security Update for Windows Vista" that whenever I have download interrupts me to use Internet Explorer 7. I have no problem download from this but find myself constantly having to uninstall these updates after installation. It's a hassle and they never go (which means that I always wonder to install). When I say cut, I mean I open the browser, but it gives me an error of loading of the page. I have a WiFi connection and make sure that I am connected, but it still says that I'm not. I also have problems with Internet Explorer 8, which after installation cannot be used because it gives me an error of loading of page and constantly suggests that I am not connected to the internet. I'd love to have my laptop Compaq in the shape of the top end and as secure as can be but I can't with these issues, and often, I decline to make the updates for this reason. If you can help me with these questions, because I promise you that I have did everything in my power so please do! If not, then I can live with this POS a bit longer ;)

  Thank you in advance!

  You should have (1) uninstalled Norton free trial, (2) download / run the Norton removal tooland then (3) installed Webroot Antivirus with Spysweeper (?) BEFORE the Norton free trial period had expired. (Too late now).

  See...

  Cleaning a compromised system
       http://TechNet.Microsoft.com/en-us/library/cc700813.aspx

  Personal data backup (which none should be considered 100% reliable at this point) then format the HARD disk and do a clean install of Windows. Please note that a repair installation (upgrade AKA on-site) will NOT fix it!

  HOW to do a clean install of Vista: section "If you want to reinstall Windows Vista by running a new installation...". "ofhttp://windows.microsoft.com/en-us/windows-vista/Installing-and-reinstalling-Windows-Vista

  Once installed the clean, you will have the equivalent of a "new computer" in order to take care of everything on the next page before connecting the machine to the internet or one local network (i.e. other computers) otherwise and before using a flash drive or the SD card that is not brand new, or has not been freshly formatted:

  4 steps to help protect your new computer before going online
       http://www.Microsoft.com/security/pypc.aspx

  Tip: After getting the computer fully patched, download/install KB971029 manually:http://support.microsoft.com/kb/971029

  NB: The Norton free trial will be reinstalled (but invalid) when Windows is reinstalled. You MUST uninstall the trial for free AND download/run the Norton removal tool before installing updates, Windows Service Packs or updates to IE AND BEFORE installing your new antivirus application (for example, Webroot Antivirus with Spysweeper).

  If you need help, please start a new thread in this forum: http://social.answers.microsoft.com/Forums/en-US/vistarepair/threads

  If these procedures look too complex - and there is no shame in admitting this isn't your cup of tea - take the machine to a local, good reputation and stand-alone computer (that is, not BigBoxStoreUSA or Geek Squad) repair facility.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Update for Windows Vista (KB2676562) Security - Code 8007065E error

  Update for Windows Vista (KB2676562) security failed 34 times since 05/16/12.

  How to solve this problem?

  Hello

  Follow these methods.

  Method 1: Follow the steps in the article.

  The problems with the installation of Vista updates
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

  Method 2: You can temporarily disable your antivirus and then try to install the update.
  Disable the antivirus software
  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software
  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 3: Follow these steps.

  Step 1: If the methods above do not help, we can put the computer in a clean boot state, and then install the update manually.

  To help solve the problems, you can start Windows Vista by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Step 2:
  Now, to install the update manually.

  If you use a 32-bit computer, download and install this update.

  Update security for Windows Vista (KB2676562)
  http://www.Microsoft.com/en-US/Download/details.aspx?ID=29829

  If you use a 64-bit computer, download and install this update.
  Update security for Windows Vista for x 64-based systems (KB2676562)
  http://www.Microsoft.com/en-US/Download/details.aspx?ID=29768

  Please take note : After completing the clean boot troubleshooting, make sure that you start the computer in normal mode.