How stable is the long term outputs analog USB-6008?

Similar Questions

• PIX: How to break the long console output?

  Hello!

  How can I break up of long on the (v.6.3) PIX Firewall console output?

  Thank you.

  Type "sho run" (or "sho conf"). At a command prompt, press 'Q', this will take you to the command prompt.

• Can I remove my office homegroup icon without damage in the long term?

  Then the homegroup icon made its way onto my desk. I can't delete it or move or hide it in a folder. Is there a way to remove it with ruin them my phone? I have a Dell Inspiron running Windows 7 Professional, if that helps. Earlier today, I don't see the icon, and I don't know why it would just appear on my computer now. I want that he went, his to the valuable assistance of the place and I'm afraid it might be a virus too. Help me please!

  I just need to know if removing will harm my computer and cause damage in the long term. My computer will be open to other people when it is deleted? I'm on the internet all the time and the last thing I downloaded as the DayZ Mod for ARMA 2.

  Homegroup Desktop Icon - add or remove the
  http://www.SevenForums.com/tutorials/34580-HomeGroup-desktop-icon-Add-Remove.html 

• Satellite A100-192: how to use the s-video output?

  My A100-192 out s-video. Can I use it to watch DVD on screen? What is needs? Can be no problem - simple connect laptop with TV and relax. Or problems?

  Hello

  Generally all the information on how to connect laptop to TV, you should find in the manual of Toshiba which is already preinstalled on the laptop.

  The laptop supports a switch for easy display on television.
  By using the FN + F5 key combination, you can switch between display devices.
  Therefore, you must connect the laptop with the s-video cable to the TV, turn on the s-video on your TV and the FN + F5 to change the TV screen output.

  If you want to watch DVDs, you must use a DVD as WinDVD playback software.

• How to catch the long menu key?

  Hello

  I have a background application that launches a window of the screen only and I need to be able to listen/catch long menu key press the application to switch to this meal bar. In fact, if the user launches the application switch my screen bar somehow needs to know so he can close. How do I do that? A UIApllication can simply listen to deactivate() calls but screen can do that. I've already implemented KeyListener, but the long press event is not caught it.

  Update:

  Hmmm... She is one storm that has the feture to launch the switch application through a long press on the menu button? Doen't work on Curve 8900.

  I can still catch the application change event in a window of the screen, anyone know how?

  Thank you.

  KeyListerners keyRepeat() seems to intercept the key event in the application that starts the screen.

  Problem seems to be resolved then.

• How to manage the Data Association output when no line not returned?

  BPM 11 g, I use a Service to select a line in an external database in passing a parameter using a database adapter.  Works fine when a row is returned.  But if no row is returned (which can happen, because no match is not found on the selection based on the value of the parameter), I get an error on the composite as output data Association has return values, including integers, mapped to a data object, I defined in the process.  Well, if no row is found, the integer value is empty and mistakes to try to save him.

  How to handle this situation?

  The specific message is:

  The expression bpmn:getDataOutput('wm91AInterfaceMainCollection') / ns:Wm91AInterfaceMain [1] / ns:board is empty. An attempt to read or copy the referenced data or calculated by the XPath generated invalid data, according to the XML schema, or did not contain some optional data. Ensure that the variable result or expression named in the error message is not empty. Enable related data elements XML schema validation for the enforcement data are valid.

  I must be missing something obvious here, but can't find a way to handle this.  Thanks in advance!

  Hey Joe,

  Of course, others will be have another idea, but opt for the XSLT option for mapping your data.  Using XSLT, you can check for null in an 'if '.

  Dan

• How to draw the graph of output?

  Hello

  How to draw the graph of an exit? is there any api for it?

  The short answer is that there is no API, but you can create your own field if you want to, and here are some samples:

  http://supportforums.BlackBerry.com/T5/Java-development/create-graph-fields/Ta-p/444968

  I recommend the search before you ask questions to see if other people have asked similar questions.  If you type chart in the search box you will find other similar topics.

• Outputs analog USB-6211 won't go below 3.375V

  I use a 6211 to pulse output 0 - 5V outputs analog using an external clock as a trigger, and after successfully using the system for a while I finished with a question where none of the channels AO out lower voltages at 3.375V. My current theory is that I can have exceeded the current 2mA max output, but I don't know how, which would result in what seems to be a permanent tension.

  I have reset the device and tried using other computers, but the problem remains. I ran the diagnostic utility and it fails part AO when it tries to output 0V and reads the 3V but he gave no further information. All other parts of the diagnosis are very good.

  Any help would be appreciated, I'm a little stuck on my diagnosis.

  Hi Airgunner1,

  I'm not quite sure because I've never worked this side of the process, but if you call in they should be able to tell what your options are. Sorry I can't be more helpful!

• Want a ramp of output voltage over time and measure input 2 analog USB-6008

  Hello

  I want to produce an analog voltage output signal that increases over time with a certain slope, which I'll send in a potentiostat and at the same time I want to read voltage and current (both are represented by a voltage signal) that I want to open a session and ultimately draw from each other. To do this, I have a DAQ USB-6008 system at my disposal.

  Creation of the analogue output with a linear ramp signal I was possible using a while loop and a delay time (see attachment). Important here is that I can put the slope of the linear ramp (for example, 10mV/s) and size level to make a smooth inclement. However when I want to measure an analog input signal he's going poorly.

  To reduce noise from the influences I want for example to measure 10 values for example within 0.1 second and he averaged (this gives reading should be equal or faster then the wrong caused by the slope and the linear ramp step size.) Example: a slope of 10 mV/s is set with a 10 step size. Each 0.1 s analog output signal amounts to 1 mV. Then I want to read the analog input in this 0.1 s 10 values)

  Because I use a timer to create the linear ramp and the analog input is in the same loop, the delay time also affects the analog input and I get an error every time. Separately, in different VI-programs (analog input and output) they work fine but not combined. I searched this forum to find a way to create the ramp in a different way, but because I'm not an experienced labview user I can't find another way.

  To book it now a bit more complicated I said I want to measure 2 input analog (one for the voltage of the potentiostat) signals and one for the current (also represented by a voltage signal) and they should be measured more quickly then the bad of the analog signal. I have not yet started with because I couldn't read on channel work.

  I hope someone can help me with this problem

  An array of index. You want to index the columns for a single channel.

• How to record the recovery of BitLocker on USB key code?

  How to record the recovery of bitlocker on my USB key code?

  Original thread: BitLocker

  Hi, nurse,.

  If I understand correctly you want to activate the Bit locker on your computer and save the recovery on USB code.

  Please follow the steps below to do so:

  1. Press Windows + X, and then select Control Panel.
  2. Click system and security, and then click BitLocker Drive encryption.
  3. Click on turn on BitLocker for the operating system disk. BitLocker will scan your computer to make sure that it meets the requirements of system for BitLocker. If your computer meets the requirements, BitLocker informs you of the next steps that should be adopted to enable BitLocker, such as preparation by car, turn on the TPM module and encrypt the drive.
  4. Secure once the TPM is initialized, the BitLocker Setup Wizard prompts you to pick how to store the recovery key. You can choose 'Save the recovery on a USB flash drive key' and follow the instructions on the screen.

  Hope this information is useful. Please let us know if you need more help with Windows, we will be happy to help you.

• Beyond the limits of voltage on USB 6008?

  I use a USB-6008 to measure analog differential in the range of 3 to 5.3 V. I chose this range, because outside this range, I'm not interested in what the tension is, knowing that his "on the rail", but to aid resolution of the ADC in this range.

  So for a signal of ~0.05 supply V, I expected to read 3V, telling me that the voltage is lower than 3V, but again it returns 0.05v?

  As it was unexpected for me, could someone please explain what can / should I expect of my USB6008 of the responsed to the signals that are the limits? Is there an effect of "rollover"? Should you return the value to the limit? Depends on how far the limit is?

  Thanks for your help!

  Entry level do not think that way. You specify the range is that you wait for the signal and the DAQmx driver will set the most appropriate range that the device supports. The actual ranges are indicated in the guide. In your case, because you specify a max of 5.3, the device would be defined the +/-10 volts range.

• Frequency of maximum output with USB-6008

  I have a digital circuit containing 3 exits, 3 inputs digital and analog 1 entry in labview with my USB-6008. When I connect to the entrance (via the DAQ assistant) analog, the output frequency is reduced to a maximum of 27 Hz, but I need 50 Hz. is possible to do?

  Ah.  You'll need a DAQ better than the 6008, to do.

  There is no train generation feature buffering or the pulse on the 6008.  The outputs are all timed by the software, you cannot build a table and tell the 6008 in the output array.  Out of the 6211 must be able to produce this signal.  Series X-series Renault will do what it takes; the USB-6341 is probably your best option.

• How to connect an lvdt and cell to usb 6008

  Please help me iam do not know how to choose a daq card. looking for a lost lt but iam.

  I want to measure the force and displacement at the same time a bench test of suspension and I wanted to use or usb6008 because of my budget for the project.

  can I use this daq card to measure these parameters?

  answer please... Thanks in advance.

  Hi Sylvia,.

  To be able to determine or not with a box NI USB-6008 would be appropriate for your application, it would be useful to get a little more information on measures you can take. If possible you would be able to provide the range of voltage, you intend to measure with your instruments and sampling rate, you need?

  I also noticed in the subject line you use an LVDT, will you also production for this tension with the 6008 or this will be done separately?

  To give you some setting in context, the NI USB-6008 case does not really simultaneous readings at every moment, but will be replacing rapdily between channels, to give effectively simultaneous samples. As this unit has a sampling rate of 10 kech. / s, and you use 2 channels, the sampling rate effective for each entry would be 5 kech. / s.

• Can I use five differential signals analog usb 6008?

  Hello!

  I have the USB-6008 housing with one and two potentiometers temperature sensor (and one meter and digital input is also beign used).

  I've only got analog +-left slot but I still need to connect the voltage and current signals of a diet. Is it possible to have both connected somehow to the last + slot?

  If it is not possible what harware would you recommend instead of the 6008?

  6211 next best step up that gets you more AI.

  Alternately, you could just put a 2nd 6008 in the system... certainly cheaper than a 621 x.

• No output from USB 6008

  Hello

  I have connected a USB-6008 to my computer, but can not read all the output using a multimeter when I run my program.

  I went in the measurement and automation explorer, disappeared to the USB6008 device, click on test panels and selected the output voltage. From there, I gave different output voltages and I read all this tension using a multimeter to the USB-6008.

  To check if there is something wrong with the pattern-block etc that I install, I connected the 6008 to another computer that is running labview and used the same program. It gives a very good result.

  Does anyone have any suggestions as to what can go wrong on the first computer?

  Much appreciated,

  Paul

  If I were in your shoes I download DAQ - mx 8.6.1 (here) on the PC that you are having problems with and give it a go.  I don't know why the 6008 would work on a PC and not the other when they have the same configuration.  Do you have other devices working on the troubled PC?