How the binary objects are sorted

Similar Questions

• How the index data are managed within the cluster?

  Hello
  
  We are evaluating the consistency.
  
  Regarding indexes, am I right in thinking that the data in the index are stored in a (managed internally) cache on the same node that the attendant at the following indexed values? I'm not interested in getting the data in the index, but rather just to understand how the data in the index itself are stored or processed within the cluster.
  
  So in a 2 cluster node where an index is applied to a distributed cache that has only 2 entries, will there be a key cache on each node 1 {binary,} to enter key where the key points to the value that is stored on this same node? In other words, I'm sure that the index data to be spread out in the cluster in the case of a partitioned topology?
  
  Concerning
  Peter

  user11279467 wrote:
  Hello

  We are evaluating the consistency.

  Regarding indexes, am I right in thinking that the data in the index are stored in a (managed internally) cache on the same node that the attendant at the following indexed values? I'm not interested in getting the data in the index, but rather just to understand how the data in the index itself are stored or processed within the cluster.

  So in a 2 cluster node where an index is applied to a distributed cache that has only 2 entries, will there be a key cache on each node 1 {binary,} to enter key where the key points to the value that is stored on this same node? In other words, I'm sure that the index data to be spread out in the cluster in the case of a partitioned topology?

  Concerning
  Peter

  Hi Peter,.

  up to 3.4.x index have been supported only on partitioned topology, and Yes, the index on each node contain only the data corresponding to the entries that have their main copy on this node (referred to as entered local subsequently).

  The indexes are not stored in a cache, but they are managed under the information that maintains consistency in terms of backup (the map that contains local entries).

  The indexes are in 2 parts:

  -index to the front: this is a mapping of the cache key in an internal representation (Playback key card in the future) the value extracted with the extractor used to create the index of the entry to membership of the cache key (value extracted later)

  -reverse index (aka. reversed card): this is a map of the value extracted from a backup set of the keys of the map of entries which we extract the index key reversed with the extractor used to create the index

  The index can be sorted, which means that the index reversed a SortedMap (sort order is the order of the extracted values)

  Let's see an example. Assuming you have the contents of the following cache within a particular extension storage node:

  A--> Object (PositionX = 5,...)
  B--> object (getA = 3,...)
  C--> object (getA = 3,...)
  D--> object (getA = 4,...)

  The index forward in this node will contain:

  Binary (A)--> 5
  Binary (B)--> 3
  Binary (C)--> 3
  Binary (D)--> 4

  The reverse index will contain:

  3--> {Binary (B), Binary (C)}
  4--> {Binary (D)}
  5--> {Binary (A)}

  Where Binary (...) designates the internal representation (binary) of the... object.

  If the index is not ordered, then the order of iteration over the entries in the index reversed are not deterministic.

  If the index is ordered, the iteration of the entries into the inverted index will be as stated above. Also, you can convert the SortedMap inverted index in order to have the very useful headMap and tailMap and firstKey and lastKey methods.

  I hope this helps.

  Best regards

  Robert

• Why none of the moving objects are detected?

  I use Adobe Premiere elements 4.1 to edit (drone) Phantom images smooth 1920 x 1080.  There is no foreground subject, but there are several background characteristics that are quite evident profiles.  When I try to apply the motion tracking, it keeps telling me: ' none of the detected objects in motion, please only use Select-object to mark the object to follow. "  This message is presented to me after I click Select object, adjust the limits and then click on object of the track.  I tried several different features of many different sizes and I still get this message.  The video is similar to this, from about 2 minutes: Upper North Fork River Kings (raw) - YouTube.

  What I am doing wrong and how do I get first to follow a feature in the background?

  I downloaded your image and created a video motion with her moving on the screen. I couldn't follow the boldest exclusively, but when I chose a larger area surrounding the most "BOLD" I have not had any problems at all. See the Image

  Apparently, you need to register more contrast in your selection to follow successfully. Center the boldest in the largest area of caterpillars as best you can.

  

  Best regards, Terry

• How the sql query to sort the records by variable

  Feel like using PHP to know how to write the query SQL ORDER BY
  value time from list/menu form field ("sort_menu") and the values in the list are the columns of the database
  
  SELECT *.
  OF rentals_info
  WHERE rentals_info.active = 'yes '.
  
  Thanks for your help,
  Jim balthrop

  JBWebWorks wrote:
  > Using fault PHP to know how to write the query to sql ORDER BY
  > run time value from list/menu form field ("sort_menu") and the list
  > values of the database columns

  Unfortunately, you can not use the Dreamweaver Recordset dialog box to set
  a column of the table as a variable. You need to adapt the code by hand, and
  Once you do, the recordset can be is no longer recognized by
  Dreamweaver. Thus, you must have first page in case the
  Bindings panel shows more the fields in your recordset.

  Begin by creating the Recordset without the ORDER BY clause and have
  your page as you want it. When everything is done, add the following
  code at the top of the page:

  <>
  create a table of column names that can be used for sorting
  $permitted = array ("price", "space");
  checks if the sort_menu variable contains a valid column name
  If (isset($_GET['sort_menu']) & in_array ($_GET ['sort_menu'], $permitted)) {}
  $sort = $_GET ['sort_menu'];
  } else {}
  the value of a default column for sorting
  $sort = "price".
  }
  ?>

  This assumes that the sort columns are called price and region.
  Change these values according to your configuration.

  You can now add ORDER BY $sort to the SQL of the Recordset.

  --
  David powers
  Adobe, Dreamweaver community expert
  http://foundationphp.com

• How the Bean object have been marked with JSTL?

  Hello
  
  Can we expose me how bean object have been marked to JSTL?
  
  Thanks and greetings
  Vijay

  Say that you value = "#{x.value}". " If it is in a context where he needs to read the value, she search a managed bean called 'x', looking for the get accessor for the bean property 'value', i.e. of GetValue and calls it. If in a context where he needs to set the value, it seems for the setter, i.e. setValue() and call it. Everything through reflection.

• How the static methods are mocked in any mocking framework JMockit?

  I've learned that we can mock static methods using Basic with PowerMock java library? Jmockit.Want to understand how it does in short in-house?
  
  I think I understand:-as we define the mock class in the test case itself (although there are different ways to create the mock class in each frame as using a syntax of waiting in Jmockit), these framework must define custom classes thru Chargers that they should be looking for this class definition in the unit test is. Its an assumption. Not sure if this is correct? But even if I'm right, preference of classloader hirerchy is boootstraploader then applicationclassloader than customerclassloader. So, how's that search for customerclassloader instead of applicationclassloader? is there a way that we can set the preference of the customer above on applicationclassloader class loader?

  You can tell your not custom class loaders to delegate to its parent.

  Or you can give the custom class loaders a different classpath from its parent and place classes to be loaded by the loader custom only on the way to his class, and on the parent.

• Several problems that occur simultaneously; the affected objects are .swf, rollover image and formMail

  I am very close to finishing my site, but a few days ago, I ran into a few problems. Things that have been working perfectly, has stopped working. These are:

  -l' in the file flash heremouseover effect. As you can see, the file plays fine, but when I move the cursor, nothing happens. The file is suppused to scroll with the movement of the cursor. In addition, each image is a link, but when you click it, nothing happens. The same problem happened to the swf file used on other parts of the page, the links stoler, edge, oppbevaring and diverse.

  - The link image of tread on the right side of this page. It is the green square object with the word "bestill' crushed it. The link to the image worked, until the computr ogre killed my page. Now, nothing happens when you hover the cursor, and the link does not work. I tried to delete and create a new, but it does not help. (There is also another file flash on this page, does not work currently, but I think that this problem is not related to the one described in this post on the forum, so please ignore)

  -The form on this page. Yet it worked once, and send forms to my email. Now, it is not yet possible to write in the form.

  I tried to understand what I have done to cause these problems. The biggest change that I've done is move the contents of each page in a model, so that only the 'content' div class is editable. But then again, it might be something else causing the problems. I don't even know if they are related, even if the problems occurred (or discovered) at the same time.

  I hope someone is able to help me.

  Thank you

  Siri

  Too many problems for a post.

  That's why I looked at just one aspect, namely the Contact form. I hope that what follows will also grind the rest of the problems.

  Add/Edit the following

  . Happy {}

  float: none;

  }

  GRAMPS

• After the migration, I set no longer filtering rules, as TB indicates "No available record" - the incoming mails are sorted according to the rules in force in the folder

  I had to install a new computer. I moved the profile data as described here. A new folder (just the icon) appeared out of nowhere (it cannot be moved, renamed, deleted, etc.).

  When I highlight a message and choose Message-> create message filters, I can't create a rule to move messages to a folder, as the area where I can choose the target folder is grayed and he says: 'no record available", that is not true, I have a lot of files and the existing rules that route incoming messages in the correct files (that have been set before the move).

  I can't rule out that this is not related to the move, but to a new version of ThunderBird, because I do not create rules that often.

  I use ThunderBird to different e-mail accounts with different providers.

  Hello

  I found the solution.

  For some unknown reason, one of my accounts was defective. I noticed that I have does not receive emails from this account and found that he had turned in this ghost file.

  After the deletion of this account (and rather to create a new account), I can again create rules as before.

  I hope that someone from the developers takes a look on this, it's pretty embarrassing.

• How the graph data are resampled pixels?

  A test, I created two identical graphs with land areas 500 pixels wide and a noisy sinusoidal signal of 1000 samples.  A chart displays the waveform right, while the other got the results of the use of the function Arrray to decimate to halve the number of samples.  They are not the same.

  Up to a waveform graph does exactly when it displays a data value larger than its width in pixels?

  

  As you have noticed, the graph is a little more intelligent that you expected.  When the number of points exceeds the number of pixels, a form any resampling must take place.  A simple decimation as you tried would eventually pass some interesting points.  Instead, the outliers receive priority when selecting which points to display.  Strong in this way, peaks and dips appear even on a large scale.  Reproduce this behavior yourself can be tricky.  And once you reduce the data set, the points are gone and zoom is not as effective.

  Usually, I try to let the chart to do as much as possible.  A simple and effective way to reduce the size of the data you have to ship on the network is to use the SGL precision instead of double precision.

• How the binary structure of unbundling that runs through the port series

  Hi all

  I have a Board that transmits a binary stream. This flow is that a structure repeated constantly... the payload of this structure looks like this

  I have no problem to read the serial port and disaplying of ASCII data, but this isn't my request.

  ANALOG_COUNT is (2)

  typedef struct

  {

  uint16_t light;
  float TempAmbient;
  float TempTarget;
  CDA uint16_t [ANALOG_COUNT];
  int16_t AccX;
  int16_t AccY;
  int16_t AccZ;

  } StreamContext_t

  The idea is for me, once I get the 20 bytes that make up the strcture that I want to brake into its parts to feed it graphs or what ever.

  Thank you

  Alejandro

  
  

• Toolbox empty: how the new features are added?

  Using the Toolbox of the printer, the only answer I get is a window that says "no device not connected" (translation from Spanish), but of course, I have a printer installed and works OK.

  There is a link "on the Toolbox. When you press on, it asks to "Select a device"... but no device is presented!

  There is also a link to 'Update the device list', but it does nothing...

  I want to understand this printer in the "list of connected devices. How can I do?

  Thanks for your help.

  Finally, I decided to remove the printer, remove all the HP software, remove everything and restart from the beginning... and now everything works OK.

  The Toolbox opens and shows my new printer, status, etc.

  So, I'll close this post.

  Thank you

• Why the background objects are appearing on top when an image is placed in indesign?

  I have a customer provided logo vector and looks fine in Illustrator, but when I place it in InDesign or rasterize the part of the background image is reflected upwards, then prints even in this way. Any ideas how to solve this problem?

  

  The black line on this element of context is set to overprint.

  1. Re-open in Illustrator, select the item and see the attributes Panel.
  2. Uncheck the overprint Stroke.
  3. Record.

• How to expose java in javascript objects so that the javascript objects display method with &lt; ctrl &gt; signatures space in scripts

  Hi all

  I exponent of java objects in javascript, but the methods and attributes does not appear in the contextual help menu (< ctrl > + space) when I use these javascript objects.

  How should I write my vso.xml so that the javascript objects are aware of methods in the Help menu popup javascript.

  for example: -.

  entry VSO.xml:

  < enumerations >

  < list type = "TestEnum" >

  values of < description > defines attributes of objects managed Boolean xml < / description >

  < entries >

  < input id = "test1" name = "TEST1" > value to Test1. < / Entry >

  < input id = "test2" name = "TEST2" > value of Test2. < / Entry >

  < / input >

  < / enumeration >

  < / enumerations >

  < script objects >

  < script object 'MyObject' = java-class name = "com.test.MyObject" >

  < description > This is a test object < / description >

  <>attributes

  < attribute java-name = "attr1" return-type = "Chain" script-name = 'Attr1' show-in-api = "true" / >

  < attribute java-name = "attr1" return-type = "Chain" script-name = 'Attr1' show-in-api = "true" / >

  < / attribute >

  < / attribute >

  <>methods

  	< java-method name = "testMtd" return-type = "Chain" script-name = "testMtd" show-in-api = "true" >
  	< Parameters >
  	< name of the parameter = "param1" type = "Any" / >
  	< name of the parameter = "param2" type = "String" / >
  	< = 'param3' type parameter name = "boolean" / >
  	< / Parameter >
  	< / method >

  < / methods >

  < / object >

  < / scripting objects >

  JavaScript: -.

  var myObj = new MyObject();

  myObj. < ctrl > + space doesn't popup any context menu, as it does for string objects or object system.

  myObj.testMtd ("abc", TestEnum. < ctrl > + space - Enums are also not pop values.)

  Any help will be greatly appreciated.

  Best regards

  Sumit Tyagi

  I see the use cases, and it would be wise to have seized semiautomatic for her, but as far as I KNOW is not possible right now.

  (I think it's comparable to the VcPlugin object. Useful methods Nice in there, but no AutoComplete)

• When I remove a remains of the object of an adjacent object are left behind

  When I use the patch tool or corrective tool to remove an object in photoshop, remnants of the adjacent object are left behind. For example, the hand of the father of the child that I need to remove I (he held the head of the baby with a finger) and when I try to remove it, somehow parts of the Cape of the baby are settled there.  Any suggestions?

  Photoshop of smart, but does not know which areas are safe and which are not.  When Content Aware Fill came out I was super impressed, but he used to introduce undesirable elements in fixed areas.  My solution was to select the areas of security of the layer and copy it into a new layer.  Then use College on the copied layer so that it had only safe pixels to draw.   What I tend to do these days is to divide the school into small pieces.  PS seems to do much better when asked to set smaller areas.

• Songs from the same album are organized in different versions of the album

  Several songs on the album are purchased on iTunes so when weve deviated our own music library on tends them to be several versions of each album it appears each with different songs on the album. The problem still persists when viewing music on any of our apple devices, even when you look at the 'albums' category there are several versions of many albums that have only 1 or 2 songs each. We tried to manually change how the songs should be sorted and nothing seems to work?

  If iTunes displays multiple instances of an artist or an album then generally what works is to select all the associated tracks and use read information to add say end X for each of the areas that the slopes have in common:

  • For an album. Album, artist of the Album and artist (if the artist is the same for all tracks) *.
  • For an artist; Album artist (artist and unless there is the comments/featured artists listed that should not be changed)

  Apply the change which merges things together, then remove the excess characters. Occasionally, it can help to close and reopen iTunes between two renaming operations. Part of a compilation should also be set in a consistent manner.

  * If the titles must be synchronized to a non - iOS device, there should be a common artist and/or album must be defined as a Compilation.

  Use the view of songs and display fields, Album, genre, Album, Album artist, genre artist Album, artist and genre artist side by side to see you whether or not it is necessary to change the artist and if sorting values could be the cause of additional problems. See grouping in albums, titles for help if necessary.

  Another tip duplicates stubborn reality. At one point, I had three batches of various artists in the view of artists in my iTunes game library that wouldn't meet usual backward X treatment. What I found worked was adding the final X, but with each group, iTunes wanted to separate start typing a value and let iTunes autocomplete of the Var... for various artists. Collection of AutoComplete lists seemed to work when the full value of collage/montage does not.

  TT2