How the printer canon pixma ip can run printing black ink

I put new inkjet for printing paper and now the colors of work but the black ink doesn't work is not black is 3rd number and 6 Please help me

Hello

I'm sorry, but it's the installation of vista operating system instance

go to the Canon Website and are looking for a manual for your model of Canon printer on how to use

try looking there under Support and drivers

http://USA.Canon.com/Cusa/home

or repost in forum Hardware

http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-hardware?page=1&tab=all

but you have to be lucky to find someone who knows this printer

and give them the model number, not only the pixma ip

Tags: Windows

Similar Questions

  • "Failure of the printer: there is a problem with the printer or ink system" message

    I get printer error message on my printer Officejet 6700 Premium.  I'm on a Mac OSX 10.9.2.

    I have reset the printer and I tried to update the firmware by the instructions, but he tells me that the device is busy and won't.  The printer is out of warranty but was hardly used - less than 200 printed pages - UGH!

    What can I do else?

    Hi Embie2014,

    Thanks for letting me know you are using the HP cartridges No.

    HP recommends you to use genuine HP cartridges. HP does not guarantee the quality or reliability of cartridge not HP, or filled HP cartridges. If you use genuine HP, the following cartridges no could not solve your problem of print quality.

    A "cartridge problem," "ink cartridge failure," or "Incompatible cartridge" Error Message appears on the all-in-one.

    Printer cannot print black ink or color ink or prints blank Pages.

    This document explains how to clean the print head.

    Thank you.

  • Photosmart 6515 does not print black ink after replaced the cartridge

    I am very frustrated! I can't get my Photosmart 6515 print black ink.

    Our school sends the documents by e-mail now that we have to print at home. Ideal for them, but not for me. They are usually in PDF format, so I do not have the ability to edit and change the blue color to print, either.

    I only use HP cartridges on this printer. I know it's more than a year, in order to call phone support will do no good.

    I replaced both cartridges and now it shows black ink completely full, but when I print the printer status report, black is not displayed. Black does not appear on the tool pages, either.

    I tried the command "clean printhead" several times. I unplugged and waited. I took all the cartridges. Connections look clean.

    What should I do to perform a partial reset or full?

    Hi Photokool,

    I understand that this has been a frustrating experience for you, and I want to help him.

    I will send you a private message, please check the little envelope on the upper right of the forums page to check your Inbox of Forums.

  • HP Officejet 6600: problem with the printer or ink system

    I have a HP Officejet 6600. I replaced the black cartridge with a new HP black ink cartridge. This message keeps poping up, there is a problem with the printer or ink system. Turn the printer off, then on. If the problem persists, contact HP. It gives me as two solutions. Solution 1: Reset the product. Turn the product off, and then unplug the power cord. Plug in the power cord and then press the key to activate the product. I've done this three times. Second solution: contact HP support note the error code provided in the email (I looked and it does not give me one) then he says, supported to contact Hp. go to: www.hp.com/support. Needless to say that this message keeps appearing on the screen of the printer and I can't do anything with the printer. Can anyone help with an idea? Please, I beg you.

    Hey @popcorn101,

    Welcome to the Forums of HP Support!

    I understand that you get the error "printer failure: there is a problem with the printer or ink system' on the front panel of your HP Officejet 6600 e-all-in-one printer.". Thanks for the troubleshooting steps that you received before reaching out for support, including. Right now, you have completed all the troubleshooting steps available in your efforts to solve this error in accordance with the document of support here. The failure itself is probably due to a failure of the print head. The print head is the part that the cartridges will fit. It controls the "reading" of the cartridges and put the ink on the page. If the print head does not, then the printing within your product system has failed. In this model of printer print head is a non-replaceable. Therefore, the resolution is a replacement of the entire unit.

    I highly recommend at this stage that you contact our Technical Support telephone queue for discover hardware replacement options.

    HP technical support are available by clicking on the following link:

    Contact HP support

    (1) once the page opens, please select the country in which you are located. Then, enter your HP model number on the right.

    (2) choose the 'Contact Support' tab at the top and scroll down to the bottom of the page "HP Support - contact" to fill out the form with your details.

    (3) Once finished, click on the 'Show the Options' icon in the lower right.

    (4) Finally, scroll to the bottom of the page and select 'phone number.' A file number and telephone number will now fill for you.

    I wish you good luck going forward with this!

  • Failure in the printer or ink systems

    What can I check after checking the unit ink and printhead on my printer IPSR 8600?  Get the error message 'problem with the printer or ink systems' have checdked ink cart. and print head.  All seem good.  Where should I go from here?

    Hello

    You have followed the steps in the link below.

    http://support.HP.com/us-en/document/c03096304

  • After you have installed the new cartridge HP do not print black ink

    HP Officejet 4620, Windows 7... installed new HP black ink cartridge and now it will not print black at all. I followed all the advice line in the help section, even cleaned the vents on the cartridge itself but shows only the white page. No error message is displayed. Diagnostic ran and says it all works correctly. Also cleaned printheads through 2 cycles still nothing. Any other suggestions? It was working fine before inserting the new black ink cartridge.

    Hi Teresa1960,

    Welcome to the Forums of HP Support! I see that you are facing some print quality problems on your HP Officejet 4620 you cannot print in black ink.

    You have completed all THE steps listed here: printer does not print black ink or color of ink or prints blank Pages, without success.

    Please note: there are three stages of print head cleaning. Three steps if necessary. If the print head is badly clogged, it may require another round of cleaning. If so, wait 30 minutes after the last step of cleaning (third) to start the first stage of the cleanup process.

    If you are unable to print in black ink, I think that the issue may be the printer and not the cartridge. I highly recommend call you our technical support at the 800-474-6836, I'm sure they will be able to help you regardless of the status of the guarantee. If you do not live in the United States / Canada region, please click the link below to get help from your region number. http://www.HP.com/cgi-bin/hpsupport/index.pl

    Thank you

  • Photoshop CS5 and CS6, I can't change a color in the color picker. I can get white, black or grey but not color. Help!

    Photoshop CS5 and CS6, I can't change a color in the color picker. I can get white, black and grey, nothing else!

    Help!

    Is your picture > grayscale mode? Try to RGB

  • My Officejet 4620 do not print black ink

    I replaced the black cartridge on my Officejet 4620 with a new high-capacity HP cartridge and it won't print black ink on the test page, any application or function of Copier.  I have reset the printer nothing helps.  The ink level indicates that it recognizes the new cartridge and says it's full.  Black ink out of the cartridge when I put my finger against the exit hole.  I cleaned and aligned the print heads, but still no go.

    just in case someone else has this problem, heres whats really past and heres how to fix this annoying problem. its relatively easy to do and more efficient than wasting money on a new printer or have that he repaired as most people eventually do.

    going on what? the ink has clogged print heads and solidifies closed. the function of "clean print heads" the printer comes with doesn't have the ability to solve this problem. This feature is to clean the heads Sales, not clogged heads. Why hp decided to make this model without a simple to remove the cradle is beyond me, but fortunately the cradle out and can be cleaned with hot water.

    theres a few items, you will need to get there easily, or you could just burst the branch loppers, like I did and vent your frustrations.

    you will need: a pair of slender beak pliers, a screwdriver torx T9 (selling auto parts stores them for a few dollars), paper towels and a space for work (its easier to do this in a corner of a room, on a small table or floor).  Keep in mind that you are dealing with ink, then change your clothes right just in case and also catch a paper plate or a few sheets of paper to print to set ink cartridges while you work.

    (1) ok. lets start. !!! FIRST UNPLUG THE PRINTER RIGHT NOW, IF YOU DO NOT ACCIDENTALLY DIE BY ELECTROCUTION!  I forgot and when I started unscrewing the first 6 screws, kept chime jump and im like * beep *? I was impressed by the security measures hp took as model engineering.

    (2) the printer is now disconnected and then go to your corner your work surface and place the printer, so there is a wall or a barrier on the left, and also, a wall or a fence behind it. This just in front of her as if you were about to use it.

    (3) now, what you have to do, is to open the printer as you will change the ink and on the right side, there is a plastic guide that prevents opening all the way to the top. Look on the side and you'll notice that he could jump off with fingers. pop off and open it completely open, so you can get to the screws of the cover you would have prevented access to.

    (4) press the scanner part and the upper part against the back wall.

    (5) all the screws you will be remove are the size T9H torx screws. There are ten total. There are 2 black screws in the top of the forehead and then 4 black screws in the top of the back. Remove them and put them on your paper plate.

    (6) following is 1 screw silver short located under the Control Panel, use your finger and feel under the * button. Unscrew, place it on the paper plate.

    (7) depending on whether you want to remove the face/Control Panel to get in the last 3 screws so locate the illustrations on the top of the printer, there are 2 on the lower left and 5 at the bottom right (1 and 2 on the left explain removals of paper jam and 1-5 on the right then explain change in ink cartridges). then about half an inch South of the illustration of the number 5 on the lip, is a plastic stand. six inches to the left is an another then 6 inches to the left, under the number of the illustration 2 (remove the paper jam) is a third support. Unscrew using your nails. Flip it up just like the hood of the car, and eten on the main top of the printer, keep the flat wire which is connected to the frame of the control panel (if the flat wire jumped because you got too loud, then simply insert it in when you go back).

    (8) then unscrew the 3 long silver screws that are located under the Panel you just popped off the coast. There is 1 on the left and 2 on the side rightish. mix 'em on the paper plate.

    (9) now that all the screws are removed, take the Panel front and partially pop it back together.

    (10) then take all over (the part with the small illustrations and lift like a hood of car, ONLY THIS TIME OPEN IT LEFT and he balanced on the edge of the printer, to lean over towards the wall or an obstacle on your left.) MAKE SURE NOT TO PULL ON THE STRIP OF COLORFUL SON FRUITS LEFT AND ALSO THE FLAT BLACK WIRE CONNECTING PART SCANNING FOR THE MAIN OF THE PRINTER PART.

    (11) then take the pliers to tapered spout and remove the 2 silver tension springs located behind the printer cartridges. Pay attention to where they were attached so you remember where they go during the Assembly. take a picture with your phone if you have to, or simply re - understand it like I did. mix 'em on the paper plate.

    (12) then disconnect the 2 large flat wire and 1 small flatwire attached to the back of the ink cart. take a picture or can remember like I did. I guess bad things can happen if you reverse the on re-Assembly. Pick up the phone and take a picture of quik to be sure.

    (13) now remove the cart ink, cartridges and all, by lifting the front first.  Be careful of the transparent tape little there that moves the carriage from left to right and vice versa. you don't want to damage this little guy. now take the transport to your paper plate. not some ink or accidentally get it on your fingers without knowing or will make a mess.

    (14) remove the ink cartridges and put them on the paper plate, side ink to avoid a mess, these things sometimes drip. put the plate side. its time to clean the print heads.

    (15) then go to the sink, to the distribution of empty ink and turn on the hot water and then let the transport of empty ink sitting there with the water mainly through the clogged color screen (inspect and make you is not a small rubber seal surrounding the small screen, if there is do not waste it. I didn't look too closely and I don't think that hp has them but I have a few other printers). It will stain the sink but water ink he comes out to be sure. notice there is also a small circuit attached to it. don't bang it upward but getting wet does not matter.

    (16) continue to do this until the water is clear.

    (17) then use your finger and rub the screen gently with your finger and then rinse it, taking ink until the water is clear. This continues until there is no more ink and screens are clean. do it for all the colors just for good measures. the color of problem that would not print, you'll notice takes longer to clean than the other colors.

    (18) now look on the lower side of the transport. these strange looking things are the leaders. Rinse in hot water and dry them with paper towels. then flip it over and the breath on the side of the screen again. also between the screenside and heads (on the side of the transport) is an opening which is also probably gunked up. It blows with water too. Then, turn it over and wipe the head again. Repeat this step until no fades or until you are sick and tired.

    (19) shake, then use paper towels to dry the entire unit. Make sure that the device is dry.  especially inside the female plugs. blow inside or out dry hair and dry gently. do not stand there and melt the but with the blow dryer. but the sooner it dries less your ink cartridges, sitting on the paper plate will dry out. the custom of the ink dry quickly just do not take a NAP or go on a date until you're back with part of the ink.

    (20) now you have finished cleaning the heads and probably don't need to do it again for the length of time, it was because you bought the printer. and just as a roadtrip you used a map to navigate, you will use these instructions in reverse for reassembly. but keep in mind when re - insert the 3 flatwires that you disconnected from the back of the ink cart, make sure you that have small metal contact on the flatwires points (side male) inserted so they affect small metal contact points on the caps of transport (feminine) side. ALSO BE VERY CAREFUL NOT TO DAMAGE BLACK FLATWIRE CONNECTING THE SCANNER PART PART HAND PRINTER. THERE IS A SMALL GROOVE IN THE PLASTIC WHERE IT CAN SIT TO GUARANTEE NO CRIMPAGE. USE IT. also make sure that the 2 hinges to the scanner portion/cover are placed correctly before the fixing of the top with the 6 black screws.

    now raise the printer and reinstall the ink cartridges. then plug in the appliance and turn it on.  If you get notifications on the control panel telling the custom of transport move, then open the trunk and remove the ink cartridges, hustles and ensure that transport is installed and that the tensioner springs are in place correctly. Repeat the operation if necessary until notifications go away or just do a test print and do not take into account the notification if you messed with it a few times already. That's what happened to me and the notification went his own. Once its online, open the hp utility and press the button "clean the heads. do 2 x in a row and you will be in style, with colors extremely rich and "BOLD" and Yes, printed black raven.

    p. s.

    You can always take your aggression out with tree limb loppers or Tin shears like I did and cut the plastic Center keeps you to transport directly outside. Completely eliminates the disassembly and reassembly. Make sure you DO NOT CUT THE TRANSPARENT TAPE THAT MOVES BACK AND FORTH TRANSPORT. This way the next time it happens it takes you only 10 minutes before you are upward and printing.

    Enjoy!  -Porf

  • my printer cannot print black ink and cartridges are all brand new

    my printer doesn't print black ink and cartridges are all new... any suggestions how to solve this problem?

    See the solution in this post.  Be sure to check the vents, as described in a link in this post.

  • HP ENVY 4504: HP ENVY 4504 does not print black ink even with full cartridge

    Used by my office printer is not printing black ink. It does not, it is out of black ink, but anything on a page I print requiring black ink is absent. I checked the cartridge to see if she had missed and the printer was not to tell me, but she didn't. I also tried to put in a new black ink cartridge, but it wouldn't print black to help anyone.

    There is no problem with color printing and the problem started only today. The black cartridge is certainly compatible with this printer as it had been good working with it so far.

    We bought this printer less than a year ago now.

    Until outside to change the cartridges I also turned the printer off and on again, but neither helped.

    I would appreciate greatly any assistance that we currently only this one printer at the office and we rely on it for a lot of work.

    Thank you very much.

    Try here.

    http://support.HP.com/us-en/product/HP-envy-4500-e-all-in-one-printer-series/5304875/model/5368526/document/c03768188/

    Ink cartridge information after doing all the recommendations of HP:

    Once you check the vents turn the cartridge and check the underside near the opening of the ink.  They can be of four plastic tabs near the opening are resurrected.  Make sure that the raised tabs are removed and made flush with the body of the cell.  This will cause the cartridge do not do sit properly in all of the print head and cause air that are expected.  This will affect especially the black ink cartridge.

    In particular, let us know if you find the above to be true.

  • HP Officejet Mobile Printe 100: Almost nine Officejet100 HP printer does not print black ink cartridge. No low or empty light show

    My 100 Officejet is less than 12 months old and has been rarely used. So far, it has printed perfectly. Now, it will printer color points, but don't print the black ink cartridge.

    There is no light showing on the Control Panel indicates that the cartridge is low or empy. Also, printing little that was made, it is impossible that he be empy so early.

    Someone at - it suggestions?

    Thank you very much.

    Hello and welcome to the community of HP @Pete226,

    I understand that you can not print black ink with your HP Officejet 100. I'll be happy to help you.

    Below, I've posted a link to a document that offers solutions of troubleshooting on this issue. Please try all the steps in order and get back to me with the results.

    Mobile printers HP Officejet 100 (L411a and L411b) - solving print quality problems

    If it helps, will testify of my answer by pressing the 'thumbs up' below, or click on the button "Accept as Solution" if I helped you reach a solution.

    I hope this helps and have a nice day.

  • OfficeJet 4630: 4630 Officejet won't print black ink

    My Officejet 4630 is 6 months old. I bought it when my previous HP printer (which was more than 2 years) stopped printing black ink. This printer is doing the same thing. I searched the forums and the internet for a solution, nothing works.

    I just changed the black ink cartridge today because he missed. I put in a geniune, brand new, HP black ink cartridge. Print the page alignment and the black ink was very uneven/faded. I scanned the pagae alignment and it has 'failed '. Printed a new alignment page, no black ink at all on this one. Then of course, the scan which has as well. I went through so many pages of reports to the printer, print quality, printer alignment pages, it's RIDICULOUS. I took the cartridge out and put it again. The printer off, he turned his back. NOTHING WORKS. This printer, which I paid a lot of money for, turns out to be useless!

    I'm NOT going to 'send this home' which seems to be the only solution I've found that I have not yet tried. If there is no solution for this problem that I can do myself so this printer is crap and I don't want that. And if this is really the case, I will never buy an HP product again because this is the SECOND time I had this problem. What is an unreliable product and brand.

    If anyone has a solution for this, I would be acknowledging the entry.

    I have exhausted the alignment and clean the print head options with no fix. However, I found a page on HP (a little hidden and I can not find yet) who said to get out the black cartridge and place the face upward all night. I did that last night, put in this morning and boom, new black ink printing!

  • HP Photosmart Premium C309: printer cannot print black ink (it's a new cartridge).

    Hi everyone, I hope someone can help me troubleshoot my printer.

    yesterday, I installed a brand new authentic ink cartridge of HP for printer HP C309 photosmart premium.

    The ink level for black on the printer is full, my other levels of color ink is low, but that should not affect something because I never print in black and white for the documents from the school.

    I tried to print black-and-white documents and the printer is fading the black in and out and sometimes not black at all, despite the fact that I have installed a new black ink cartridge.

    I tried:

    (1) align the printer cartridges through the tool on printer settings (this alignment failed 2 times, always without success)

    (2) cleaning of the print head through tool on printer settings (tried this 3 times and still no improvement)

    Any other suggestions?

    Hi @plutolover2011

    I want to help you to be able to print again. I understand your color cartridges work, but it's not black ink.  Please start with the procedure described in the following document; Printer prints a blank Page or does not print black or color ink for HP Photosmart Premium C309a the C309c all-in-One

    If you have performed all the steps in the document above and the problem persists, not one of HPs, my personal recommendation is to use the solution put forward in the next video.  I suggest that if the printhead and the printer he are out of warranty.  Hot water rinse printhead - HP ink printers of the series with removable head.

    I have recommended this solution to others and have been successful, but I can't guarantee that this will solve the problem, it is a term of type line of effort. I hope it helps.

  • Printer cannot print black ink

    We have HP Photosmart B110 series - just moved pc and printer from one room to the other and when he came again to print the printer does not print black ink.  The cartridges are fairly new, and we did not use a printer, so I don't know that the black ink is not low at all, and the pc shows only a fraction of the black ink used.  The pc and the printer are not defects, it prints fine in other colors.  Went to the diagnosis of HP's utility and the printer came with all green ticks, but the test page printed came in white.

    Cannot make the step "Uninstall" I have lost the cd to reinstall the software.

    Baffled.  Can someone help me please?

    I watched several blogs on the site of HP, which concerned problems similar to mine.  I have combined several approaches and now have a printer that works properly.  I removed the print head and it soaked for three cycles of 5 minutes in distilled water (~ 170) about 3/4 inch deep with continuous slight stirring.  First soaking quickly became the black water, the second ended with the water a dark gray color, but the third rinse was almost obvious.  Hot distilled water dissolve the ink dried in the passages of the small ink contained in the part of ejection of ink from the print head cartridges.  I then carefully dried the print head as instructed, clean the electrical contacts on the printer and placed the print head and ink cartridges in the printer.  I turned off the printer, then unplugged it for a minute.  I have the plugged in and turned on, allowing it to print an alignment sheet.  Because the water remained in the corridors of the ink, the sheet had empty spaces, but a sheet of test house which has small samples of many points of color and the words in the color of each word was then printed with very good results.  The printer has now worked perfectly for a week.

  • Photoshop 6515: Photoshop6515 will not print black ink

    I have the same problem that many people have had where my printer is not printing black ink. I followed the steps here in case of problems: http://support.hp.com/us-en/document/c03760633 and nothing!

    Help, please.

    Thank you.

    Mary

    Thanks for the reply Mary

    With that, I'll send you a private message to let you know what happens then. If you are unsure how to check your messages on the forum this post, has instructions.

Maybe you are looking for