How the prior print jobs can be deleted?

Original title: print - screen

Try to print to the screen, the status of the printer says that there are 9 previous impressions. How the prior print jobs can be deleted?

You must delete the queue, as follows:
Open a run window (Windows Logo key + R), type cmd and press ENTER. Now, type these commands, which are in uppercase for clarity only:

NET STOP SPOOLER and press enter
DEL %SYSTEMROOT%\SYSTEM32\SPOOL\PRINTERS\*.* and press enter
NET START SPOOLER and press enter
EXIT and press enter

Tags: Windows

Similar Questions

  • Printer HP Deskjet 3056A - how to cancel print jobs stored?

    When my HP 3056 A print, it's paper. Once I loaded paper, I decided to cancel the last print job incomplete but print different documents. However, the printer still prints the last time unfinished documents. How can I locate and cancel the unfinished printing stored?

    Hello

    Normally, it will not disappear.

    Kind regards.

  • My printer will not remove the last print job

    My printer will not remove the last print job and does not meet what I already found on internet support

    Hello

    If you haven't done so already, try the following.

    From the desktop, hold down the Windows key and press R.  In the run window, type services.msc and press to enter.  Scroll down to the print spooler service, right click and select Properties, then click the Stop button.  Now search for C:\Windows\System32\Spool\PRINTERS, then delete the work inside this folder - you may need to click a command prompt to get the authority to open the PRINTERS folder.

    Restart the computer and you should find that the document has been deleted.

    Kind regards

    DP - K

  • Cannot cancel the Word print job - the job status = error

    When you try to print from Word, I can't print because a previous task cannot print.  I tried to cancel the job, but the system will not delete it.

    I have sucessfully printed by e-mail since the former cannot print job, but I can't get this previous work to go.

    Here is a screenshot of the ePrint application that appears when I want to print in Word.

    Solved... just had to go into devices and printers, select the printer and cancel the job.

  • After removing the Dual Boot, I can't delete the old partition

    Some time ago I installed an SSD and I have Windows 7 installed in Dual Boot with the Windows 7 system.
    So, I had two versions of Windows 7, which worked well.

    Now I no longer use the old system, I disabled the function of Dual Boot. I want to format the old drive, but it does not work because Windows still sees it as active system partition. In addition, I can't delete the partition.

    How can I format or delete the old partition?

    I already tried Msconfig, Bud that did not help. Default Msconfig begins with 'selective startup' and an operating system that is displayed in the Startup tab. When I select 'Normal Startup' there are two operating systems that are listed in the Startup tab. When I delete the old and reboot, it is back again...

    Who has the solution?

    (1) create a system repair disc (if you do not have an installation disk for Windows 7 for the version of Windows you have installed).
    http://Windows.Microsoft.com/en-us/Windows7/create-a-system-repair-disc

    (2) then remove the hard disk you want to format. Now try to start the remaining version of Windows. You should see a missing bootmgr message. Proceed to step #3.

    (3) Bootmgr is missing, message or black screen with cursor flashing
    (See method #2 in this Wiki article)
    http://answers.Microsoft.com/en-us/Windows/wiki/Windows_7-system/Bootmgr-is-missing-message-or-black-screen-with/73fef5b7-5a7f-4910-a2b0-7219e9ec1646

    (4) after you have created the BCD store on the remaining drive (to step #3 above), it should start up on Windows and also be the partition 'Active'.

    (5) shut down the PC and set the old drive, turn on a load Windows and then delete all the remaining partitions on the old disk.

    J W Stuart: http://www.pagestart.com

  • a print job in the print queue prevents the other print jobs, printing hp 3050 j610 series

    Hello

    I have a windows 7 PC with Wi - Fi connection and one for the printer HP 3050 J610 series. I get an error since the fix it doctor that a print job in the print queue prevents the other printing of print. I looked on the internet where I see several comments that say I must go into the command prompt but I don't know what to ask for 'my' specific printer and a PC. Can anyone help? Thank you

    Hello

    Good to know that your problem is solved. Please do not hesitate to answer, in the case where you are facing in the future other problems with Windows.

  • Photosmart 6520: blank page prints after the complete print job

    A blank page prints when printing is complete

    The troubleshooting in the here document steps can help solve the white pages on your printer Photosmart 6520 printing.

  • How the letters Print

    Hi, I'm very new to cc & b,
    My scenario is after success of an account an event should occur, this event should print the letters

    Now
    1. What does take to this event?
    2. in the case where we configure the algorithm for using a specific letter print s/w?
    3. an example of script code/plugin java in obtaining data from the table and a flat file generation

    At least an answer to these questions will have plenty of help me and make me move forward, thanks techies.

    There are several ways to do this, as well a card user interface or without any user interface or directly from the Page card account when an account is registered. This is not your issue at the moment.

    Even from in terms of the user interface you can manipulate in different ways:

    Option 1:
    Run a Service Script directly from the click of the button print, i.e. call oraInvokeSS('CM-CreateCC'); either directly within the on_click() function or have another custom javascript function to invoke it. Call oraInvokeSS() of another javascript function would add the better error handling.

    Option 2:
    Run a Script of BPA from the click of a button, which in turn calls the Script Service to create a Customer Contact. that is by calling oraRunScript(); function, yet once, either the on_click() function or another javascript routine.

    Option 3:
    Output of the interface card user passing the return value in the oraSubmitMap() function to invoke the Script within the source of BPA Service (assuming that the source of the invocation of user interface mapping) as part of "the next step of the Script.

    Note that option 1 you should be at least on CC & B V2.2.

    The Service Script (SS) should call Customer Contact (CC) BO with 'Add' identified actions Type of Contact with the customer who has a Contact Action "send the letter.

    In the next step of the SS, you must again call BO CC with "update" action affecting the value true to ACTION_DSP_LTR_SW . This should invoke the algorithm 'Online Image of letter' on the event of installing System Options - framework, simulating "View letter" button click on Customer Contact Page behavior.

  • How to cancel print jobs in the queue? Model: HP Laserjet 3055

    I wanted to print a book of 200 pages of my laptop, so I pluged in the printer to the computer laptop and hurry to print on laptop. Then immediately decided not to print it, then I pressed cancel on the printer. But labour has not at all been cancelled. Whenever I try to print something it always starts with the work that I wanted to cancel initially. And on the laptop, the message block asking you if I want to add to the print queue.

    I would like to cancel the work that is placed into the queue of the printer for good, if someone can advise please help me, very desperate!

    Thank you

    Martine

    Hi John,.

    Open the Printers folder, and then double-click the printer. Click on the printer and then cancel all documents.

  • How to cancel print jobs in the queue?

    HP Pavilion dv7-3174nr Entertainment Notebook.

    Hello

    In Control Panel, open administrative tools and select abuse.  Scroll down to the print spooler service, right click and select Properties, then click the Stop button.  Now search for C:\Windows\System32\Spool\PRINTERS, then delete the work inside this folder - you may need to click a command prompt to get the authority to open the PRINTERS folder.

    Reboot the laptop and you should find that the documents have been deleted.

    Kind regards

    DP - K

  • I have a printer installation on a desktop wireless wireless, how the wireless printer can be shared with the main PC

    Windows 7 PC main with modem and router

    PC Windows 7 other connection via WIRELESS and a wireless HP OfficejetPro 8600
    Problem: How to print on the printer without wire of the main PC

    Check the IP address allocated to the printer.

    On the PC, add a new printer in devices and printers, scanning the network for the printer that needs to be automatically detected, confirm with the IP address.

  • DeskJet 3050 a cannot disable the unwanted print job

    I have a jod impression which shows that deletion, but he never removes, and for this reason, I can not print anything else. my printer works as it makes copies and I did an alignment, so I guess it's a software problem but just a guess.

    Problem solved, I have updated the software of HP and he himself cleared!

  • 4520 ENVY: no impression at all despite the test print job

    Hello

    big noob here, so grateful for any help.

    I wanted 4520 2 months and it has worked fine until 2 weeks ago when I changed my internet provider.

    I used the wireless Assistant to change the wifi on the printer and I've updated the last settings. I went as well

    I can scan and send the scans of envy to my macbook air. When I go into the settings of the printer and do a test print, it works.

    However, I was not able to print anything at all. It queued up on top of the pop up list printers (computer is noted inactive) and basiclly anything happen.

    No idea what I need to do?

    Thanks a lot guys!

    S.

    Hey @sofistar,

    Welcome to the Forums of HP Support!

    I see that you have some problems with your machine Mac OSX 10.11 to your craving 4520 e printing - all - in - one printer. I can help you with that.

    To start, make sure that the printer is plugged directly into a wall outlet, not a surge protector. Once done:

    1. Close any programs you have open.
    2. Click on your Apple icon, system preferences and printers and Scanners.
    3. Hold down the CTRL key and click the icon of your printer on the left.
    4. Click on reset printing system.
    5. Click on the button "+" at the bottom left.
    6. Select your printer from the list.
    7. Click in the box next to and select your printer from the list.
    8. Click on Add.

    Please let me know the results after following the above. If you are able to print, click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

  • Had to install XP Pro in one folder other than the Windows folder. Can I delete the new folder without causing problems?

    I was cleaning some ad/bad/spyware on the computer of a friend. It runs XP Media Center 2005. When I restarted it, it wanted a password. He put never, ever. The only work around was to reinstall XP without deleting any of his files (more than 8000 music files) because it is not anything save. I put the new XP in a different folder, I named. After searching around, all of his stuff is there and I can access, but this new folder is take a LOT of resources/mem. There is almost nothing in this record, I can delete the new folder without compromising each other, installation? I think I would need to get rid of mode safe mode with command prompt. I did it so many times, but it's never happened to me. Help!

    Once you get the drive installed, simply use xcopy or Robocopy to copy the files, with a fairly large music 8000 drop these command-line utility will be faster than to try to copy them through the Windows Explorer GUI.  Xcopy is integrated with Windows XP, Robocopy is available for download from Microsoft.

    John

  • I can see a title of music downloaded in the music, but I can't delete it

    I downloaded a music file, I think it is mp3. When I click on the tile of music on the start page, it shows a collage of *, but I can see the song title and artist of the downloaded file. I can not play, so I want to remove it. I can't find the file anywhere else... like in or music downloads. So, how can I remove it? Thank you.

    Hi George,.

    Thank you for the update.

    I suggest sfc/scanner and check if system files are corrupt.

    The sfc/scannow command. analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions. When the analysis is complete, the System File Checker tool indicates whether integrity violations were found. If integrity violations are detected, the System File Checker tool difficulty integrity violations.

    Follow these steps to run sfc/scan.

    a. press the Windows key + X and click/click on (Admin) command prompt.

    b b.. in the elevated command prompt, type sfc/scannow , and then press enter.

    NOTE: It can take some time to finish the race.

    Let us know the status of the issue. We would be happy to help you.

Maybe you are looking for