How the recovery disk creator actually works?

Similar Questions

• Satellite M300 - how to use the recovery disk creator?

  Satellite M300

  How to use Recovery Disc Creator and what is the main function of Recovery Disc Creator?

  Hello

  I guess you didn't read the manual again because it explains quite well what is the recovery disk creator.

  However, this tool creates the Toshiba restore disk. This disc contains a picture of the factory settings. This means that the Windows operating system that is pre-installed with all the drivers and tools of Toshiba. It of easy to use (just boot from the disc), simply follow the instructions on the screen.

  For example, if you install another Windows or Windows peut t start you can use this disk to recover a system that works.

• Satellite C650 - error reading disk and the recovery disk does not work

  Hello

  I have a toshiba Satellite C650, who has recently developed with a disc read error. I want to access the command prompt to try some possible solutions I've read on the internet.

  I made a Windows 7 recovery disk using my other acer laptop which has also installed Windows 7 64-bit. When I use the recovery disk and it loaded the files etc it evokes just a black screen and the cursor.

  Does anyone have any ideas as to why this is happening?
  I tried to start my computer acer laptop from the recovery disk and it worked fine.

  As is - this does anyone have suggestions as to why I get the message "disk read error - press ctrl, alt and delete to restart?

  Any help would be appreciated, thanks.

  On this virtual path, it is not easy to offer the exact diagnosis, but of course, there must be a problem with the HARD drive. Can you get a second one for test purposes and exchange it. Just to be sure if the HDD is troublemaker.

  But there is something else:
  > I made a Windows 7 recovery disk using my other computer acer laptop...
  Sorry, but I don t understand this. Can you please explain what you did exactly?

• HP S3120N. I replaced the motherboard and the power, now the recovery disks do not work.

  I'm not so happy owner of a HP Pavilion S3120N. I am running windows vista home edition. The motherboard went out so I replaced it with a Zotac GeForce 8200 - ITX Wifi series. Now the computer says it is noa a hp solution valid, and the recovery disks do not work. is there a way to fix this without buying a new operating system?

  Yes, return the Zotac motherboard and get an OEM HP/Compaq M2NC51-AR / HematiteXL-GL8E motherboard. I know that's not the answer you want to hear, but the recovery discs are locked to a specific set of HP/Compaq machines with specific HP OEM motherboards. Apart from this, you will need to buy a new OS.

  Frank

• Satellite L300 - where can I download the recovery disk creator?

  Hi all

  I bought a L300 without OS and now his work well enough with Vista32. But I need to install Toshiba Recovery Disc Creator on this laptop. I tried several websites of toshiba, but I am unable to find this utility on the web (s) tosiba. Please help me with that and I appreciate if someone can send the download link for Toshiba Recovery Disc Creator Utility.

  Thank you

  Ruwan

  Boyfriend sorry but the recovery disc creator Toshiba cannot be downloaded.
  Normally the creator Toshiba Recovery disk it s preinstalled on your laptop if the laptop comes with Windows Vista.

  The only way to get a recovery disk is to order a new Toshiba directly:
  https://backupmedia.Toshiba.EU/landing.aspx

• The recovery disks do not work for the hard drive replaced in my Presario CQ4010F desktop PC

  Hi all

  I have a Compaq Presario CQ4010F Desktop PC (Windows 7 64-bit) in which the hard drive went bad. I bought a new hard drive which is a 1 to, the failed drive was 500 GB. So, I ordered disks system recovery, four in total. The disk labeled 'Use this first!' appear to be running fine, then prompted me to launch the next disc, which I assume is the 1 of 3 system recovery disk. With the computer, always, I inserted the CD 1 of 3 and have waited and watched as nothing has happened. I restarted the PC with the 3 disc 1 again and that will inspire nothing happened. Any help is appreciated in this matter.

  Hello:

  If you can't get the recovery disks to work (don't make sure that the keyboard, mouse and monitor are connected), then you can make your own windows 7 installation DVD and use that to at least get windows 7 installed and your PC back to the operation.

  Here's how.

  If you can read the Microsoft windows 7 25-character product key, you can download simple Windows 7 ISO files to burn on a DVD for the version of windows that is installed on your PC, and which is listed on the Microsoft COA sticker on your PC case.

  Burn the ISO with the option to burn the ISO on your DVD burning program and burn it at the slowest possible speed that will allow your program. This will create a bootable DVD.

  Or use the installation of Windows 7 USB/DVD tool to compile the ISO file that you download from Digital River. Link and instructions below. You need a 4 GB flash drive to use the USB compilation method.

  http://www.microsoftstore.com/store/msstore/HTML/pbPage.Help_Win7_usbdvd_dwnTool

  Use 25 characters on the PC product key to activate the installation.

  The key will activate a 32 or 64 bit installation.

  Then go to the support of the PC and driver page to install the drivers you need.

  Link to downloads ISO of W7 is below.

  http://www.mydigitallife.info/official-Windows-7-SP1-ISO-from-Digital-River/

  Paul

• Pavilion 4070 - us: new hard drive for the recovery disks do not work! Help!

  Hi - the hard drive on my Pavilion 4070 - crashed us, so I bought a replacement - a Samsung SSD 850 EVO, 256GB drive.  The problem is that I can't seem to get the recovery disks to work, and neither Microsoft nor HP is willing to help me.  Of course, Microsoft tells me they don't give me any help for Windows7 OEM versions and HP said that my product is no longer supported so they do not help me.  This is ridiculous - I own a legal copy of Windows 7 and I can't get any help from the company who sold me the computer?

  What happens when I go through the process of installation with the recovery discs, is that instead of the Windows installation continue as it is supposed to, I have "no boot device - insert boot disk and press any key any."  I'm desperate, I tried two different options - one was the minimum image recovery, the other was a factory restore.  Nothing seems to work. What can I do?   Moreover, the original hard drive is not * completely * dead - I can still access most of the data on it.

  Hello:

  Yes... It works fine for me.

  Here's the source Web page.  Select the download link of W7 Home Premium x 64 from there...

  http://forums.mydigitallife.info/threads/14709-Windows-7-Digital-River-direct-links-multiple-languages-x86-amp-x64/page58?p=469389 & viewfull = 1 #post469389

• Satellite A300 - I can't find the recovery disk creator

  Hello world!

  Need help with my Satellite A300. I lost the recovery disc optical I burned when the laptop was new. Now when I try to burn a new disc of recovery can't get the Recovery Disc Creator - not on the desktop or in the Start meny. I still have the folder with all the left recovery files - a folder named HDDRecovery with 4.5 GB size. The problem is to know how to burn the disc.

  Can anyone help?

  iMate, Sweden

  Hello!

  You have reinstalled the laptop with your own version of Windows?

  The problem is that the recovery disc creator can t be downloaded. So I think you use HARD drive recovery function to restore the factory settings. After that, it is perhaps possible to burn the disc of recovery again.

  Good bye

• Satellite U400 cannot create DVDs of recovery with the recovery disk creator

  Hello

  I have a Satellite U400 (a few years), and I never created the recovery DVDs.
  Now I want to do, but for some reason, when I run creator of Toshiba Recovery disk, nothing happens...
  The partition containing the files of recovery is there, as well as the folder HDDRecovery. I have add a few files on this partition, this could be the problem?

  Thanks for your help.

  > I have some files on this partition, this could be the problem?
  N ° if you didn t change the partition structure should not be the problem.

  It is: does this Toshiba recovery disc creator market or not? If you can not star this tool has nothing to do with the recovery files.
  You will find this file - C:\Program Toshiba Toshiba Recovery Disc Creator\TRORDCLauncher.exe?

• Why the recovery disks do not work?

  Hi friends:

  My laptop is HP HDX18. He has broken several days so I had to send it to a repair station. I took my laptop station repair for a week. Engineers told me that some material had been changed, such as motherboard, LCD display, but also outer shell. I checked it and it worked fine.

  Before my phone was broken, I did a system recovery discs and they worked well.

  Now I want to restore the system to the initial setting at the factory by the recovery diskettes, BUT! It alert with the words ' this product does not support system recovery!

  Could you please tell me why not recovery discs work? and how to fix this?

  the devices that were replaced are:

  audio device

  graphics chip

  Chipset

  You can go back to that of the repair station and ask for drivers, they must provide you with the pilots because they are the only one who knows what motherboard has been installed.

  your recovery discs no longer work while you do a clean install of your operating system.

  Click on the star to say thank you.

• Satellite A300-211 - failed to start the recovery disk creator

  I just installed ultraiso program, when I opened the toshiba recovery disc creator this message appears

  An unexpected error has occurred.
  exit this application and start it again.
  (error code: 0D00F6-26-00000015)

  with an option only ok when I press on it, it seems once again, when I press ok for the second time, it disappears and the program runs. What can I do to stop this?

  Note: I had the same problem with the program of poweriso

  my lap is an A300-211

  Hi mate,

  Can you please tell us what is happening if you uninstall the program ultraiso? To be honest, ths program isn't known to me, I never heard of this.
  Then try again please.

  In the worst cases, you need to start recovery disc option HARD reinstall Windows. Then you should be able to create the recovery media. The HARD drive recovery process, I founded this:
  http://APS2.toshiba-tro.de/KB0/HTD9102IR0000R01.htm

• Satellite U400 - failed to create the recovery disk - bad DVD player?

  Hi all

  I have a 13 inch Satellite U400.
  Due to problems with my Softkeys, lighting and hibernation status (any help on thos would also be useful) I want to create a recovery DVDs with the Toshiba Recovery Disk Creator.

  The thing is: it starts when I have a CD in the DVD drive, but as soon as I put a DVD in (what is needed), it gives me an errormessage that said something like 'another application is using this drive or no disc recording where found in the laptop. 0D00E4-F0-00000000 error code).

  My DVD player does not work properly, I can play movies and the drivers and the status is ok too.
  I noticed, that error code changes, but I don't know how to get the recovery disk creator will.

  What can I do? Change something in the registry?
  I don't know what happened on my laptop, I bought a few months ago - new. I guess that, reset everything would bring my softkeys, lighting and hibernation status back.

  So, if someone nows how to work at least one of the problems, please give me advice.

  Thanks in advance,

  wiglip

  Hello

  Did you create virtual CD/DVD drives with special software? If so, remove the software completely. In addition, if you have installed burning, programs, you should check if they will be started when Windows starts and if so, disable the beginning upward. So go to start > run > msconfig > start. Here, you can disable the start of burning software (for example Nero, CD Burner XP, etc.).

  And what DVD are you using for burning? I have good experiences with DVD - R Verbatim and TDK discs. These are high-quality discs and you should try it too!

  Last but not least, you need to remove the upper and lower registry filters. It is always advisable to the problems of the CD/DVD drive:
  (1) run Regedit (start-> Run-> Regedit)
  2) go to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class {4D36E965-E325-11CE-BFC1-08002BE10318}
  (3) in the right pane, delete the "UpperFilters" key and delete the key "LowerFilters".
  (4) restart.

  Depending on your problem with the keys to enlightenment that you should try to reinstall the Toshiba value added Package. This determines the buttons of enlightenment, FN keys and other special functions on your laptop. I had a similar problem with my Qosmio F50 illumination buttons and I posted something on this subject in the Qosmio forum that you should try it too!
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=165724

  Good luck! :)

• Satellite A50 - recovery disk is not working

  Hello

  I'm trying to do a clean install on my laptop, but the recovery disk is not working.
  The files transferred to the laptop, but once done, I get an error message that says: "the system is not fully installed. Please run Setup again."

  Does anyone have suggestions as to how to fix it?

  It took me four days to get to this point and make me very frustrated.

  Thanks heaps

  Naomi

  Hello

  What is the installation using another CD; That is to say the Microsoft Windows XP disk?
  Have you tried that?

  In my opinion, this would help to pinpoint the problem
  The error message can be linked to different issues; I mean the HARD drive or a single partition problem could also be possible.

  Try to format the drive HARD whole again. Delete all partitions from the HARD drive and check if you can proceed with the installation.

  But if you will not be able to install the OS by using the recovery disk and other disks then a question must relate to a part of the material. (possibly HDD)

• NB200-10Z - error when opening recovery disk creator

  I try to use the "recovery disk creator" to create a recovery on a USB disk rather than to burn CD/DVD (don't have an available CD drive). I think it's supposed to be achievable, see http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=230453. However the help file (C:/Program Files/Toshiba/TOSHIBA Recovery Disc Creator/TrdcHelp.html) for "Recovery disc creator" makes no mention of the use of USB keys.

  I have a 8 GB USB key. I tried formatting FAT32 and NTFS.

  When I try to open the "Recovery disk creator" program I get a window saying 'another application is using that drive or no recordable discs are recorded on your PC. Please check the State of the reader. "So I can't start the program 'Recovery disc creator' Version is 2.0.0.3.

  I formatted the USB incorrectly? Must be formatted as a starting BACK, if so, which are the files I need to do to? I need a newer version of 'Recovery disc creator' to do with USBs - if so someone can suggest a link where to find them? I couldn't find a link to the version 1.0.0.6c here http://www.csd.toshiba.com/cgi-bin/tais/support/jsp/downloadDetail.jsp?soid=2350909 &; pf = true

  I'm incorrect in assuming that I can use a USB key? Its a NB200-10Z with XP SP3.
  Auggestions or links to other popular forum posts. My apologies if I missed a previous thread on this!

  Hello

  Recovering files can be created on a USB key, too, but if you can t begins the recovery media creator due an error message that it has nothing to do with your USB key.

  I read the other post on the forum you mentioned and the guy has disabled his security software (antivirus and firewall). Have you tried the same thing? Some security programs blocks some programs so disable the software and try again.

  Recovery disc creator can t be downloaded but what you can do if it still doesn t work done a HARD drive recovery facility. This will restore the initial configuration prétestées and then you can try again to create the USB stick recovery. :)

• System recovery disks do not work.

  I have a HP G62 339WM Notebook PC with Windows 7 Home Premium 64-bit.  I bought by mail, system recovery discs and they do not work.   And my HP Support Assistant displays "an error has occurred" and end not updates.

  The Troubleshooting Guide for the recovery started from CD or DVD says: "update the firmware of the drive. This is especially true if the disks were received from HP customer service by mail. The firmware of a DVD player (the pilot) isn't able to recognize the support of recovery disk which was created using a newer DVD manufacturing process. Download and install updates on the firmware of the DVD available at HP that corresponds to the type of DVD drive on your computer. »

  How do I update the firmware of the player when my HP Support Assistant would conduct no updates.  I downloaded the latest Hp Support Assistant and he always always says "an error has occurred."

  My laptop model has no updates from HP.

  As new as your laptop is I doubt you need a firmware update for the CD/DVD drive.

  Could you give a little more detail also the recovery disks do not work. For example you get an error, or is the laptop just not boot from them and goes directly into Windows?

  Have you tried to put the first disc in the drive, shut down the laptop, wait a minute or two and turn on the laptop, start typing the ESCAPE key to get the menu. Should be an option of F9 to select the boot device. Select the CD/DVD drive and press ENTER.