How the 'registration' identity can be removed when a computer prepares for recycling?

Similar Questions

• How the write protection can be removed?

  My card reader has no installation of write protection. Whenever I try to copy music or impossible to copy all the files from local disk to micro SD card, it is write-protected. Please tell me how can I remove write Protection?

  The card micro SD and adapter as shown here?

  http://www.cellphoneshop.NET/51trmeca.html

  If you do, there is a little switch on the side of the adapter, you need to push up toward the end.

• How can I find out what programs I should have started and what are the programs I can start myself to my computer to run correctly when starting?

  * Original title: startup

  How can I find out what programs I should have started and what are the programs I can start myself to my computer to run correctly when starting?

  Hello

  I understand you want to learn about programs, you should start your Windows startup. I will certainly help you to question.

  When you start Windows by using a normal startup startup, several applications and services automatically, and then run in the background. These programs include the base system, antivirus software, utility applications processes system and other software that was previously installed. These applications and services may cause interference when you install or run a program.

  The system configuration is a tool that can help identify problems that might prevent Windows from starting correctly. You can start Windows with common services and startup programs turned off and then reactivate them, one at a time.

  I suggest you to refer to the links below and check if this is useful:

  Using the Configuration System (msconfig)

  Perform a clean boot to determine if background programs interfere with your game or program

  Hope this information helps.

  Please get back to us with an update on the issue, we will be happy to help you.

• How can I remove a laptop computer as an authorized device?  My old laptop crashed and I bought a new one.

  How can I remove a laptop computer as an authorized device?  I replaced a MacBook Air that crashed.

  Hi williamg,

  Are you eager to deactivate an Adobe product that has been enabled on the laptop that crashed? If so, please visit https://helpx.adobe.com/x-productkb/policy-pricing/activation-deactivation-products.html.

  Best,

  Sara

• Sync to iphoto with Iphone hangs on during synchronization. In addition the google map can be charged when I click on the places of Mediathek. Error message: "this page has not loaded correctly Google Maps. See the JavaScript console for more technical de

  Sync to iphoto with Iphone hangs on during synchronization. In addition the google map can be charged when I click on the places of Mediathek. Error message: "this page has not loaded correctly Google Maps. See the JavaScript console for more technical details. »

  Perhaps the reason for the problem of synchronization is the problem with the loading of google map?

  Error message: "this page has not loaded correctly Google Maps. See the JavaScript console for more technical details. »

  Apple has not renewed the contract with Google to access Google servers.

  If the old version of iPhoto, which are still using Google's servers for the cards and places are either crashing or hanging.  Places are only work in iPhoto 9.5.1 or newer, who use places of Apple servers.

  There is more support for iPhoto from Apple.  You must update iPhoto 9.5.1 with the Mavericks. It would work well, only it is no longer buying this update to Apple.

  Perhaps the reason for the problem of synchronization is the problem with the loading of google map?

  It is very likely.  If iPhoto work very well when you are offline, then your problems will be caused by the connection failed to Googles servers.

  See this: Bug: iPhoto 9.4 crashing when viewing the scene

• How the vCenter vConverter can be activated?

  I use the vSphere update1 assessment. I was told to the enterprise, what Enterprise includs vCenter vConverter version version.

  I'm not sure. If so, how the vCenter vConverter can be activated?

  Thank you!

  George

  Hi George,.

  You can install vCenter Converter by connecting the vCenter Server installation CD to autorun.exe. And then selecting vCenter Converter in the menu.

  Best regards, Robert

• Successful installation Acrobat XI leaves a folder on the desktop.  Can I remove it?

  Successful installation Acrobat XI leaves a folder on the desktop.  Can I remove it?

  Hello

  The folder you're talking about is having the configuration for the XI Acrobat. If you need in the future, once again, then keep it as a backup. If you have the download available on your Adobe account, you can delete the folder ythis from now and download it again and install if necessary.

  Thank you

  Kapil Malik

• Two computers share the same wi - fi Modem. When A computer reads a message that is marked as read on two PCs, not allowing computer B see what needs to be read.

  Two computers share the same WI - fi Modem. When A computer reads a message that is marked as read on the two PC, not allowing the B to see what still needs to be read. Email is Thunderbird.
  Please help, thank you for this option online support

  I should add that if you operate the account using Pop then messages can be left on the server without any indication that they have been read. You define each customer to leave them on the server.

  However if you don't know what messages have been read, I know not how will you know which ones to delete and when to do it. Without active maintenance your server could quickly become full.

• How to change folder name by default when you use save for Web in java script?

  Hello everyone, hope you can help me.

  
  

  Photoshop has a folder name by default of images When you export using slices Save for Web . I need to change this folder name.

  How to change folder name by default when you use save for Web in java script?

  Thanks in advance!

  
  

  

  

  
  

  JJMack Chuck Uebele Nicolas Ribot SuperMerlin
  

  You can try with scriptlistener to record the code. Change to the last line of the NO to ALL dialog boxes, so that the dialog - if you wish. There are two places in the code to save the files: one where is actually saved the file, and the other where the default value is file. I have seen it changed something with it. So, you can simply use the first listing of a path in the code below.

  #target photoshop
  
  var idExpr = charIDToTypeID( "Expr" );
      var desc19 = new ActionDescriptor();
      var idUsng = charIDToTypeID( "Usng" );
          var desc20 = new ActionDescriptor();
          var idOp = charIDToTypeID( "Op  " );
          var idSWOp = charIDToTypeID( "SWOp" );
          var idOpSa = charIDToTypeID( "OpSa" );
          desc20.putEnumerated( idOp, idSWOp, idOpSa );
          var idDIDr = charIDToTypeID( "DIDr" );
          desc20.putBoolean( idDIDr, true );
          var idIn = charIDToTypeID( "In  " );
          desc20.putPath( idIn, new File( "C:\\Users\\csuebele\\Pictures\\LR shortcuts" ) );//Here's where it actually saves
          var idFmt = charIDToTypeID( "Fmt " );
          var idIRFm = charIDToTypeID( "IRFm" );
          var idPNtwofour = charIDToTypeID( "PN24" );
          desc20.putEnumerated( idFmt, idIRFm, idPNtwofour );
          var idIntr = charIDToTypeID( "Intr" );
          desc20.putBoolean( idIntr, false );
          var idTrns = charIDToTypeID( "Trns" );
          desc20.putBoolean( idTrns, true );
          var idMtt = charIDToTypeID( "Mtt " );
          desc20.putBoolean( idMtt, true );
          var idEICC = charIDToTypeID( "EICC" );
          desc20.putBoolean( idEICC, false );
          var idMttR = charIDToTypeID( "MttR" );
          desc20.putInteger( idMttR, 255 );
          var idMttG = charIDToTypeID( "MttG" );
          desc20.putInteger( idMttG, 255 );
          var idMttB = charIDToTypeID( "MttB" );
          desc20.putInteger( idMttB, 255 );
          var idSHTM = charIDToTypeID( "SHTM" );
          desc20.putBoolean( idSHTM, false );
          var idSImg = charIDToTypeID( "SImg" );
          desc20.putBoolean( idSImg, true );
          var idSWsl = charIDToTypeID( "SWsl" );
          var idSTsl = charIDToTypeID( "STsl" );
          var idSLAl = charIDToTypeID( "SLAl" );
          desc20.putEnumerated( idSWsl, idSTsl, idSLAl );
          var idSWch = charIDToTypeID( "SWch" );
          var idSTch = charIDToTypeID( "STch" );
          var idCHsR = charIDToTypeID( "CHsR" );
          desc20.putEnumerated( idSWch, idSTch, idCHsR );
          var idSWmd = charIDToTypeID( "SWmd" );
          var idSTmd = charIDToTypeID( "STmd" );
          var idMDCC = charIDToTypeID( "MDCC" );
          desc20.putEnumerated( idSWmd, idSTmd, idMDCC );
          var idohXH = charIDToTypeID( "ohXH" );
          desc20.putBoolean( idohXH, false );
          var idohIC = charIDToTypeID( "ohIC" );
          desc20.putBoolean( idohIC, true );
          var idohAA = charIDToTypeID( "ohAA" );
          desc20.putBoolean( idohAA, true );
          var idohQA = charIDToTypeID( "ohQA" );
          desc20.putBoolean( idohQA, true );
          var idohCA = charIDToTypeID( "ohCA" );
          desc20.putBoolean( idohCA, false );
          var idohIZ = charIDToTypeID( "ohIZ" );
          desc20.putBoolean( idohIZ, true );
          var idohTC = charIDToTypeID( "ohTC" );
          var idSToc = charIDToTypeID( "SToc" );
          var idOCzerothree = charIDToTypeID( "OC03" );
          desc20.putEnumerated( idohTC, idSToc, idOCzerothree );
          var idohAC = charIDToTypeID( "ohAC" );
          var idSToc = charIDToTypeID( "SToc" );
          var idOCzerothree = charIDToTypeID( "OC03" );
          desc20.putEnumerated( idohAC, idSToc, idOCzerothree );
          var idohIn = charIDToTypeID( "ohIn" );
          desc20.putInteger( idohIn, -1 );
          var idohLE = charIDToTypeID( "ohLE" );
          var idSTle = charIDToTypeID( "STle" );
          var idLEzerothree = charIDToTypeID( "LE03" );
          desc20.putEnumerated( idohLE, idSTle, idLEzerothree );
          var idohEn = charIDToTypeID( "ohEn" );
          var idSTen = charIDToTypeID( "STen" );
          var idENzerozero = charIDToTypeID( "EN00" );
          desc20.putEnumerated( idohEn, idSTen, idENzerozero );
          var idolCS = charIDToTypeID( "olCS" );
          desc20.putBoolean( idolCS, false );
          var idolEC = charIDToTypeID( "olEC" );
          var idSTst = charIDToTypeID( "STst" );
          var idSTzerozero = charIDToTypeID( "ST00" );
          desc20.putEnumerated( idolEC, idSTst, idSTzerozero );
          var idolWH = charIDToTypeID( "olWH" );
          var idSTwh = charIDToTypeID( "STwh" );
          var idWHzeroone = charIDToTypeID( "WH01" );
          desc20.putEnumerated( idolWH, idSTwh, idWHzeroone );
          var idolSV = charIDToTypeID( "olSV" );
          var idSTsp = charIDToTypeID( "STsp" );
          var idSPzerofour = charIDToTypeID( "SP04" );
          desc20.putEnumerated( idolSV, idSTsp, idSPzerofour );
          var idolSH = charIDToTypeID( "olSH" );
          var idSTsp = charIDToTypeID( "STsp" );
          var idSPzerofour = charIDToTypeID( "SP04" );
          desc20.putEnumerated( idolSH, idSTsp, idSPzerofour );
          var idolNC = charIDToTypeID( "olNC" );
              var list4 = new ActionList();
                  var desc21 = new ActionDescriptor();
                  var idncTp = charIDToTypeID( "ncTp" );
                  var idSTnc = charIDToTypeID( "STnc" );
                  var idNCzerozero = charIDToTypeID( "NC00" );
                  desc21.putEnumerated( idncTp, idSTnc, idNCzerozero );
              var idSCnc = charIDToTypeID( "SCnc" );
              list4.putObject( idSCnc, desc21 );
                  var desc22 = new ActionDescriptor();
                  var idncTp = charIDToTypeID( "ncTp" );
                  var idSTnc = charIDToTypeID( "STnc" );
                  var idNConenine = charIDToTypeID( "NC19" );
                  desc22.putEnumerated( idncTp, idSTnc, idNConenine );
              var idSCnc = charIDToTypeID( "SCnc" );
              list4.putObject( idSCnc, desc22 );
                  var desc23 = new ActionDescriptor();
                  var idncTp = charIDToTypeID( "ncTp" );
                  var idSTnc = charIDToTypeID( "STnc" );
                  var idNCtwoeight = charIDToTypeID( "NC28" );
                  desc23.putEnumerated( idncTp, idSTnc, idNCtwoeight );
              var idSCnc = charIDToTypeID( "SCnc" );
              list4.putObject( idSCnc, desc23 );
                  var desc24 = new ActionDescriptor();
                  var idncTp = charIDToTypeID( "ncTp" );
                  var idSTnc = charIDToTypeID( "STnc" );
                  var idNCtwofour = charIDToTypeID( "NC24" );
                  desc24.putEnumerated( idncTp, idSTnc, idNCtwofour );
              var idSCnc = charIDToTypeID( "SCnc" );
              list4.putObject( idSCnc, desc24 );
                  var desc25 = new ActionDescriptor();
                  var idncTp = charIDToTypeID( "ncTp" );
                  var idSTnc = charIDToTypeID( "STnc" );
                  var idNCtwofour = charIDToTypeID( "NC24" );
                  desc25.putEnumerated( idncTp, idSTnc, idNCtwofour );
              var idSCnc = charIDToTypeID( "SCnc" );
              list4.putObject( idSCnc, desc25 );
                  var desc26 = new ActionDescriptor();
                  var idncTp = charIDToTypeID( "ncTp" );
                  var idSTnc = charIDToTypeID( "STnc" );
                  var idNCtwofour = charIDToTypeID( "NC24" );
                  desc26.putEnumerated( idncTp, idSTnc, idNCtwofour );
              var idSCnc = charIDToTypeID( "SCnc" );
              list4.putObject( idSCnc, desc26 );
          desc20.putList( idolNC, list4 );
          var idobIA = charIDToTypeID( "obIA" );
          desc20.putBoolean( idobIA, false );
          var idobIP = charIDToTypeID( "obIP" );
          desc20.putString( idobIP, """""" );
          var idobCS = charIDToTypeID( "obCS" );
          var idSTcs = charIDToTypeID( "STcs" );
          var idCSzeroone = charIDToTypeID( "CS01" );
          desc20.putEnumerated( idobCS, idSTcs, idCSzeroone );
          var idovNC = charIDToTypeID( "ovNC" );
              var list5 = new ActionList();
                  var desc27 = new ActionDescriptor();
                  var idncTp = charIDToTypeID( "ncTp" );
                  var idSTnc = charIDToTypeID( "STnc" );
                  var idNCzeroone = charIDToTypeID( "NC01" );
                  desc27.putEnumerated( idncTp, idSTnc, idNCzeroone );
              var idSCnc = charIDToTypeID( "SCnc" );
              list5.putObject( idSCnc, desc27 );
                  var desc28 = new ActionDescriptor();
                  var idncTp = charIDToTypeID( "ncTp" );
                  var idSTnc = charIDToTypeID( "STnc" );
                  var idNCtwozero = charIDToTypeID( "NC20" );
                  desc28.putEnumerated( idncTp, idSTnc, idNCtwozero );
              var idSCnc = charIDToTypeID( "SCnc" );
              list5.putObject( idSCnc, desc28 );
                  var desc29 = new ActionDescriptor();
                  var idncTp = charIDToTypeID( "ncTp" );
                  var idSTnc = charIDToTypeID( "STnc" );
                  var idNCzerotwo = charIDToTypeID( "NC02" );
                  desc29.putEnumerated( idncTp, idSTnc, idNCzerotwo );
              var idSCnc = charIDToTypeID( "SCnc" );
              list5.putObject( idSCnc, desc29 );
                  var desc30 = new ActionDescriptor();
                  var idncTp = charIDToTypeID( "ncTp" );
                  var idSTnc = charIDToTypeID( "STnc" );
                  var idNConenine = charIDToTypeID( "NC19" );
                  desc30.putEnumerated( idncTp, idSTnc, idNConenine );
              var idSCnc = charIDToTypeID( "SCnc" );
              list5.putObject( idSCnc, desc30 );
                  var desc31 = new ActionDescriptor();
                  var idncTp = charIDToTypeID( "ncTp" );
                  var idSTnc = charIDToTypeID( "STnc" );
                  var idNCzerosix = charIDToTypeID( "NC06" );
                  desc31.putEnumerated( idncTp, idSTnc, idNCzerosix );
              var idSCnc = charIDToTypeID( "SCnc" );
              list5.putObject( idSCnc, desc31 );
                  var desc32 = new ActionDescriptor();
                  var idncTp = charIDToTypeID( "ncTp" );
                  var idSTnc = charIDToTypeID( "STnc" );
                  var idNCtwofour = charIDToTypeID( "NC24" );
                  desc32.putEnumerated( idncTp, idSTnc, idNCtwofour );
              var idSCnc = charIDToTypeID( "SCnc" );
              list5.putObject( idSCnc, desc32 );
                  var desc33 = new ActionDescriptor();
                  var idncTp = charIDToTypeID( "ncTp" );
                  var idSTnc = charIDToTypeID( "STnc" );
                  var idNCtwofour = charIDToTypeID( "NC24" );
                  desc33.putEnumerated( idncTp, idSTnc, idNCtwofour );
              var idSCnc = charIDToTypeID( "SCnc" );
              list5.putObject( idSCnc, desc33 );
                  var desc34 = new ActionDescriptor();
                  var idncTp = charIDToTypeID( "ncTp" );
                  var idSTnc = charIDToTypeID( "STnc" );
                  var idNCtwofour = charIDToTypeID( "NC24" );
                  desc34.putEnumerated( idncTp, idSTnc, idNCtwofour );
              var idSCnc = charIDToTypeID( "SCnc" );
              list5.putObject( idSCnc, desc34 );
                  var desc35 = new ActionDescriptor();
                  var idncTp = charIDToTypeID( "ncTp" );
                  var idSTnc = charIDToTypeID( "STnc" );
                  var idNCtwotwo = charIDToTypeID( "NC22" );
                  desc35.putEnumerated( idncTp, idSTnc, idNCtwotwo );
              var idSCnc = charIDToTypeID( "SCnc" );
              list5.putObject( idSCnc, desc35 );
          desc20.putList( idovNC, list5 );
          var idovCM = charIDToTypeID( "ovCM" );
          desc20.putBoolean( idovCM, false );
          var idovCW = charIDToTypeID( "ovCW" );
          desc20.putBoolean( idovCW, true );
          var idovCU = charIDToTypeID( "ovCU" );
          desc20.putBoolean( idovCU, true );
          var idovSF = charIDToTypeID( "ovSF" );
          desc20.putBoolean( idovSF, true );
          var idovCB = charIDToTypeID( "ovCB" );
          desc20.putBoolean( idovCB, true );
          var idovSN = charIDToTypeID( "ovSN" );
          desc20.putString( idovSN, """c:\photos""" );//Here's where the default folder is suppose to go.
      var idSaveForWeb = stringIDToTypeID( "SaveForWeb" );
      desc19.putObject( idUsng, idSaveForWeb, desc20 );
  executeAction( idExpr, desc19, DialogModes.ALL );
  

• The CC CC cleanup tool remove from my computer and allows me to install again on a new computer?

  The CC CC cleanup tool remove from my computer and allows me to install again on a new computer? I fear that Adobe's going to think I always CC on the computer and not allow me to install (it's the second machine I use on my driver's license). It's a working machine and it will disappear while I'm away from the office, so I only have a possibility to get this right.

  Hi John,.

  You can use the CC cleaning tool to remove CC apps to your current machine, but do not forget to disconnect from them before uninstalling.

  Connect and disconnect activate Cloud Creative applications

  Once you disconnect, it will disable the CC of the current computer and then you can activate it on the new machine.

  Kind regards

  Sheena

• How can I remove a temporary computer-to-computer network?

  I created a temporary computer-to-computer local network connection in an attempt to transfer files between two computers (which was unfortunately unsuccessful). However, the network is still there and I want to remove for security reasons. How can I remove a network that I put in place? I checked the troubleshooting guides and there doesn't seem to be any information.   Two computers are still in close range (I don't think that our House is still big enough to get out of the beach), and I clicked 'save the network' when I did. I am running Vista.
  any help would be great

  Open the Control Panel and go to network and sharing Center. Click Customize to the right of the current network in network and sharing Center , and then click merge or delete network locations at the bottom of the screen again. Merge or delete as you wish.

  You will also need to click on manage network connections on the left in the network and sharing Center and remove the network you want.

  MS - MVP Windows Desktop Experience, "when everything has failed, read the operating instructions.

• Video transfer of the file to the desktop and can not remove it

  Windows Explorer

  Video camera Hitachi desktop VOB file, impossible to remove and windows Explorer runs my cpu at 99%. How to delete the file, it won't let me rename etc. Can run the Explorer in the background, but cannot stop it.

  Try to remove from a command prompt. Tip: you can put the name of the file on the
  Clipboard by pressing SHIFT and right-click the file - copy as path
  will appear in the menu.
   
  Type cmd in the start search box, and select command line. Type
   
  Del
   
  Right-click in the line of command to paste the path.
   
  Frame with quotes
   
  for example
   
  del "c:\some folder\filename.ext".
   
  If Explorer has a lock on the file, Ctrl + Shift + right click on an empty spot
  on start and choose Explorer output. To restart Explorer press Ctrl + Shift +.
  Escape and menu file - new task (run)... and type explore.
  --
  ..
  --
  "Andrew Racz" wrote in message news: cb6fbaba-ee1a-4a7a-aa8b-7e97961224d9...
  > Fired video VOB Hitachi camera desktop file, can't remove it
  > and windows Explorer runs my cpu at 99%. How to delete the file
  > It won't let me not rename etc. Can run the Explorer the
  > background but cannot stop it.
   
   

• How the clip markers can be promoted in chronological markers?  I cut a clip and rearranged the order of the pieces in the timeline panel, so now I want a set of benchmarks that reflect their position in the timeline panel.

  Clip markers have as their frame of reference of the timeline, they came.  If you create a new brand of element in a new timeline, the marker in time is measured from his original script, not the new timeline where he is.  Currently in CC 2015 organization there is no way to translate the clip marker references 'Local' in the 'World calendar"in which they now live.  I captured on video a 8mm film that is chronologically jumble of short scenes.  I placed the chronology of chapter for each scene markers, export the list of markers and finally understood the rearrangement of pieces of scenes he needed to put everything in chronological order.  Thank God for the ability to export the list of markers, just as I needed!  So the whole sequence has 85 chronological markers, dividing the sequence into 5 pieces and rearranging puts them all in chronological order.  Obviously, I don't want to have to restore the scene boundries 85 times, I did as a necessary step to solve the puzzle.  I think you might meet one day some of these problems:

  1. the most obvious thing is located in the calendar for a piece, lift it and 'paste insert' where it belongs on the timeline.  Problem: Lift or excerpt from don't lift or extract chronological markers with it, so when "Insert you a block", the piece inserted in the timeline has lost its bearings, they were left.

  2. How about you make a sous-suite of the segment to move?  Yes, it carries all the tracks, but not the chronological markers whence he came.

  3. ok, I'll export the calendar together with chronological markers and reimport - ah, Yes, success, the chronology of the markers are now item, marks on the imported clip (the entire chronology).  That's great, because the clip markers are sticky with the clip, I can it chop, rearrange to put markers in chronological order without returning any info title marker.  Feeling beat with the reorganization completed five segments of the original timeline, everything is in order, nothing was reinstated, the timeline with its clip of chapter markers is ready to export to still make the DVD!  Yes, you guessed it, element chapter marks are not exported in yet.  The chronology of imports still with a marker, Chapter 1, at the beginning.

  4. There must be a way, stacked the timeline with the time markers on it on the icon for "New"... ', it is the same as #3 above, but simpler.  Historical markers are now the clip markers that don't export in yet.

  From my experiences, it is therefore impossible to solve my problem without completely restoring scene boundries and type chapter titles.  There are two repositories coordinated, clip) 1 local and 2) global chronology; and there is no way to go from one to the other 'mass'.   There is the glove, I'm sure someone has a way to do this without returning the title of chapter 85 markers.

  I have not found an automatic way to do this, but here is an efficient manual method that requires no titles of chapters Overtype.

  Either drop your timeline that has mounted the icon "Create New" brands, or export the timeline and import it back.  You now have a new timeline and markers are now on the video clip.  Now, chop and reorganize this video clip, it is in the best new order, and the clip markers stick with the sections of the clamp.  Now this procedure migrates the markers of the clips to the timeline (promotion):

  Start at the beginning of the timeline, select the video clip. (The video clip must be selected for M to open the marker editing window)

  1. type change M to find the first element brand, type M to open the editing window of clip marker, select the marker title and copy (control-C), hit Cancel

  2 hit the icon of reference in the program monitor pane, which puts a green marker on the timeline at the same time as the brand of element,

  3. double-click on the Green marker, paste the title of marker by control V, select the radio button of chapter markers, click OK.

  Repeat steps 1-3 to promote all the markers of clip of historical markers with the same marker titles.  Since we cut the timeline to reorganize, there are several video clips.  As you progress, make sure that the clip that you are working on is selected, otherwise M will not open the editing window, instead, it will place a chronological marker.  In short, follow this procedure exactly, it works.  It's a stupid job, but it does the job with without having to retype marker titles.  The chronology chapter titles now think time on the new timeline and they will export in yet.  Hope someone finds it useful at some point in the future.

  Perhaps team first see the usefulness of this and add a command 'Promote the clip for mounting marks markers' and "retrograde chronological markers for the clip markers" (conservation type, title and comments).  It would be a powerful addition.

• The log files can be removed automatically in the environment of the HA

  Hi experts BDB.

  I write db HA 4.6.21 the bdb version-based application. Two processes are running on two machines, a master who will be read/write db, one as a client/backup reads only the db. There is a thread in demon master who perform checkpoint all the 1 second: dbenv-> txn_checkpoint (dbenv, 1, 1, 0), and dbenv-> log_archive (dbenv, NULL, DB_ARCH_REMOVE) will be called after runnng checkpoint each time. The env has been opened with indicator: DB_CREATE | DB_INIT_TXN |  DB_INIT_LOCK | DB_INIT_LOG | DB_REGISTER | DB_RECOVER | DB_INIT_MPOOL | DB_THREAD | DB_INIT_REP;   Autoremove indicator has been defined: envp-> set_flags (uid_dbs.envp, DB_LOG_AUTOREMOVE, 1) before open env.

  I found this thread https://forums.Oracle.com/message/10945602#10945602 , who discussed non-ha environment and I tested my code in an env without DB_INIT_REP non-ha, it worked. However in HA env these log files were never deleted. Could help you in this matter? The customer needs to run checkpoint? Can it be a bug in the bdb?

  Thank you

  Min

  There is a thread in demon master who perform checkpoint all the 1 second: dbenv-> txn_checkpoint (dbenv, 1, 1, 0), and dbenv-> log_archive (dbenv, NULL, DB_ARCH_REMOVE) will be called after runnng checkpoint each time. The env has been opened with indicator: DB_CREATE | DB_INIT_TXN |  DB_INIT_LOCK | DB_INIT_LOG | DB_REGISTER | DB_RECOVER | DB_INIT_MPOOL | DB_THREAD | DB_INIT_REP;   Autoremove indicator has been defined: envp-> set_flags (uid_dbs.envp, DB_LOG_AUTOREMOVE, 1) before open env.

  I do not say that this is causing a problem, but make the DB_ENV-> log_archive (DB_ARCH_REMOVE) in your thread and setting DB_ENV-> set_flags (DB_LOG_AUTOREMOVE) are redundant. In your thread, you control the timing. The DB_ENV-> set_flags (DB_LOG_AUTOREMOVE) option checks and removes unnecessary log files when we create a new log file.

  Have you seen in the documentation of DB_ENV-> set_flags (DB_LOG_AUTOREMOVE) we do not recommend do deleting files of automatic newspaper with replication? While this warning is not repeated in DB_ENV-> log_archive (DB_ARCH_REMOVE), it also applies to this option. You should review the use of this option, especially if it is possible that your customer could go down for a long time.

  But it is a warning and automatic log removal should work. My first thought here is to ask if your client has recently experienced a synchronization? Internally, we block archive on the client during certain parts of a synchronization master to improve the chances that we will keep all records required by the sync client. We block archiving for 30 seconds after the client synchronization.

  I found this thread https://forums.oracle.com/message/10945602#10945602 that discussed non-ha environment and I tested my code in an env without DB_INIT_REP non-ha, it worked. However in HA env these log files were never deleted.

  This thread is to discuss a different issue. The reason for our BDB 4.6 warning against the use of automatic elimination of log with replication is that it only takes into account all sites in your replication group, so that we can remove a log of the master who always needs a client.

  We added remove auto journal group that supports replication manager replication 5.3 BDB, and this discussion is about a change in the behavior of this addition. With this addition, we no longer need to recommend against the use of elimination automatic log with replication in BDB 5.3 and later versions.

  Could help you in this matter? The customer needs to run checkpoint? Can it be a bug in the bdb?

  I'm not sure that the customer needs to run its own control points, because it performs checkpoints when it receives control point of the master journal records.

  But none of these options to delete log on the master does nothing to remove the logs on the client. You will need to do the following: to archive logs separately to the customer and the master.

  Paula Bingham

  Oracle

• How the proxy service can get the client certificate in Oracle Service Bus

  Hello everyone, now I'm confused in how can get service proxy client certificate in Oracle Service Bus. I have configured bidirectional SSL in Weblogic, the client sends its cerficate to Weblogic and Weblogic checks this cerficate if have access permissions Weblogic, but my proxy service cannot obtain this certificate to do more work, who can help me?
  And my proxy service service type is the messaging service.
  
  Thank you!!!
  Sea

  Hi, if you have configured for client certificate authentication, weblogic maps an attribute in the DN of the client certificate to a user of weblogic security realm. The attribute is controlled by the default configuration to map the user in the default identity asserter in the WLS Console--> security--> kingdoms--> suppliers--> default identity Asserter. Generally, the CN attribute is selected for this purpose. You must also create a user in the security field, with the value of this attribute in the client certificate for authentication to succeed. Once the authentication is successful, the user is used as the authenticated user. So if you want to set permissions for authorization on the proxy, you can do it based on this user. For this you need not the certificate of the client. In the pipeline of message, I guess you can get the authenticated user of $inbound, which in turn corresponds to an attribute in the DN of the client certificate.