How the REMOTE HTBasic command?

Similar Questions

• Running the Remote OS command

  We have a 12 c ODI architecture using a dedicated server of 12 c of WebLogic running a J2EE agent and a DB of the ODI repository server. For this we have a warehouse of data on a separate server.

  We need to run commands to move, copy, compress and preprocess the operating system files. On previous implementations that we just used the standard ODI-utility commands such as ODIFileMove and ODIOSCommand, as the location where files that needed to be addressed and shell scripts on shared storage that had a mount up on the Weblogic ODI server where the agent is running. However, on the current implementation, it is not possible to have shared storage that will allow the data warehouse db and the ODI agent both see the transformation and loading files in the db (by effective means such as external Tables).

  It doesn't seem to be possible to run these commands to ODI utility on a remote server named, other than:

  (a) have mounted shared storage - and so the officer commands executed effectively on 'local' on the server directories

  (b) install an autonomous remote agent and the design of the packaging takes place the remote commands in a scenario of the child and instruct the scenario of the child to use a separate agent - one who is physically installed on the server where the files and shell scripts

  My understanding is correct?

  I'm not keen on an autonomous agent on the remote server if it can be avoided, because it means lose us some benefits and resilience of the use of J2EE agent on the dedicated server in Weblogic - also we simply may not be able to install an autonomous agent ODI (let alone a J2EE one) on the remote location.

  see you soon,

  John

  Hi jhall_uk_redux,

  Indeed, these are the two typical approaches. Now, you can also run some commands FTP using OdiFtp or OdiSftp ODITools, but this only works for the management of the core files.

  For more advanced things you can do is have a shell script that is located in a place that can reach your agent JEE. In this shell script, you can use ssh to connect to the remote location and run a command (or call another script shell on the distance).

  I see that you have some Questions on the forum. It's a good thing to shut them down if they are resolved or follow-up if it is still pending. Encourages us to support you in the future.

  Best regards

  JeromeFr

• How the 300 licenses command ASA5516 with (more permanent) Anyconnect

  Hi all

  I am new to cisco CCW, I want to know how to order ASA5516 Cisco Anyconnect (more perpetual) with 300 seats

  because in the Convention is not "AC-PLS-P-300-S!"

  Can I order units of AC-PLS-P-100-S x 3?

  Thank you.

  Hello

  You can order it like I should be working.

  According to AC FAQ:

  After activation of the key, the ASA is unlocked for maximum physical capacity. Respecting the unique authorized user account and term limits are honor system and are not physically enforced by the ASA or AnyConnect.

  Source: http://www.cisco.com/c/en/us/support/docs/security/anyconnect-secure-mob...

  BR,

  Zsolt

• How reslove an error with the dbms_redefinition.start_redef_table command?

  Command:

  BEGIN

  () DBMS_REDEFINITION.start_redef_table

  uname = > "kiku"

  orig_table = > 'pletest3_pn_kiku_api_db ',.

  int_table = > 'pletest4_pn_kiku_api_db');

  END;

  Error:

  Error report:

  ORA-12008: error path refresh materialized view

  ORA-14400: inserted partition key is not mapped with any partition

  ORA-06512: at "SYS." DBMS_REDEFINITION", line 50

  ORA-06512: at "SYS." DBMS_REDEFINITION", line 1343

  ORA-06512: at line 2

  12008 00000 - "error in the path of refresh materialized view.

  * Cause: Table SNAP$ _ < mview_name > reads lines of sight

  MVIEW$ _ < mview_name >, which is a view of the main table

  (the master can be on a remote site).  Any

  error in this way will cause this error when updating.

  For updates of the Rapids, the table < master_owner >. MLOG$ _ < master >

  is also referenced.

  * Action: Examine the other messages on the stack to find the problem.

  See if SNAP objects $ _ < mview_name >, MVIEW$ _ < mview_name >.

  < mowner >. < master > @ < dblink >, < mowner >. MLOG$ _ < master > @ < dblink >

  There is always.

  How reslove an error with the dbms_redefinition.start_redef_table command?

  As I said before, this may be reproduced if the intermediate table is not created correctly.

  SQL> --My database version.
  SQL> ----------------------
  SQL> SELECT * FROM v$version;
  
  BANNER
  --------------------------------------------------------------------------------
  Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
  PL/SQL Release 11.2.0.1.0 - Production
  CORE    11.2.0.1.0      Production
  TNS for Linux: Version 11.2.0.1.0 - Production
  NLSRTL Version 11.2.0.1.0 - Production
  
  SQL> ed
  Wrote file afiedt.buf
  
    1  CREATE TABLE not_partitioned_tbl AS
    2*  SELECT object_id,object_name,created,owner FROM all_objects
  SQL> /
  
  Table created.
  
  SQL> ALTER TABLE not_partitioned_tbl ADD CONSTRAINT not_partitioned_tbl_pk PRIMARY KEY (object_id);
  
  Table altered.
  
  SQL> CREATE INDEX npt_created ON not_partitioned_tbl(created);
  
  Index created.
  
  SQL> EXECUTE DBMS_STATS.gather_table_stats('SCOTT','NOT_PARTITIONED_TBL',cascade=>true);
  
  PL/SQL procedure successfully completed.
  

  Now, I create the staging table without MAXPARTITION, so not all "created" dates cannot be mapped.

  SQL> ed
  Wrote file afiedt.buf
  
    1  CREATE TABLE partitioned_tbl (object_id NUMBER, object_name VARCHAR2(30), created DATE, owner VARCHAR2(30))
    2      PARTITION BY RANGE (created)
    3      (PARTITION pt_2005 VALUES LESS THAN (to_date('01/01/2006','dd/mm/rrrr')),
    4       PARTITION pt_2006 VALUES LESS THAN (to_date('01/01/2007','dd/mm/rrrr')),
    5       PARTITION pt_2007 VALUES LESS THAN (to_date('01/01/2008','dd/mm/rrrr'))
    6      --PARTITION pt_rest VALUES LESS THAN (MAXVALUE) -- Maxpartition  is commented out intentionally.
    7*     )
  SQL> /
  
  Table created.
  
  SQL> EXEC DBMS_REDEFINITION.can_redef_table('SCOTT','NOT_PARTITIONED_TBL');
  
  PL/SQL procedure successfully completed.
  
  SQL> conn sys as sysdba
  Enter password:
  Connected.
  SQL> ed
  Wrote file afiedt.buf
  
    1  BEGIN
    2     DBMS_REDEFINITION.start_redef_table('SCOTT','NOT_PARTITIONED_TBL','PARTITIONED_TBL');
    3* END;
  SQL> /
  BEGIN
  *
  ERROR at line 1:
  ORA-12008: error in materialized view refresh path
  ORA-14400: inserted partition key does not map to any partition
  ORA-06512: at "SYS.DBMS_REDEFINITION", line 52
  ORA-06512: at "SYS.DBMS_REDEFINITION", line 1646
  ORA-06512: at line 2
  
  SQL>
  

• How to display /etc/resolv.conf and other files from the remote host to the vMA host ESX4i

  Hi all;

  I'm new at VMAs, I put it in place and adds 5 Server esxi 4 and I can list the fines using vifp lists broadcast and works, very well but my problem is I want to interrogate the remote servers for this vMA host for example I need to check the contents of these files

  cat /etc/resolv.conf

  cat/etc/sysconfig/clock

  tail/var/log/vmkernel

  Discovered the following

  esxcfg-firewall - q and esxcfg-vswif - l

  Can someone please help me on how to run these commands or another way on how to get this information above hosts and ESXi 4. I checked the forum, but I don't see anything similair nature! now, either I'm stupid full because it's as simple as drinking water and so no one asked or I am just lucky to ask the right question, so be it, I appreciate your time and effort

  Thanks in advance

  Esxlinux

  So its worth your time through the vMA documentation to understand how to manage your hosts and it's main use case. The operations that you are trying to accomplish cannot be done using vMA... at least in the way that you are hoping for.

  See my vMA article and some of the getting started guides.

  cat /etc/resolv.conf

  You will want to use esxcfg-dns to list the configured DNS servers

  cat/etc/sysconfig/clock

  This file does not yet exist on ESXi, if you try to set the time on ESXi host, you should use NTP and it is also important to note that single ESXi uses UTC and no other options are available.

  tail/var/log/vmkernel

  If you need to display the host logs, consider using vi logger on vMA OR configure syslog on your host to send to the centralized syslog server

  Regarding the last two commands, they do not apply to an ESXi host and therefore these commands are not available.

  There are certainly differences between ESX and ESXi, understand the differences and orders to ask for certain pieces of information is very important. vMA can help with this, but you must understand the use case of vMA and what tools are at your disposal. The best way to start is to take a look at the documentation, to jump it and try to jump in, will just be confusing.

  Good luck

  =========================================================================

  William Lam

  VMware vExpert 2009,2010

  VMware scripts and resources at: http://www.virtuallyghetto.com/

  Twitter: @lamw

  repository scripts vGhetto

  Introduction to the vMA (tips/tricks)

  Getting started with vSphere SDK for Perl

  VMware Code Central - Scripts/code samples for developers and administrators

  VMware developer community

  If you find this information useful, please give points to "correct" or "useful".

• How to start a single group in the remote computer to the machine master

  Hello
  
  I want to know the command for any machine remote master boot of the machine and how to start a single group for the remote computer to the machine master.
  
  Thank you
  Amit

  You can start all of the remote machine (after you start the master of the machine) as follows:

  tmboot b -l .

  For all available options tmboot see http://download.oracle.com/docs/cd/E18050_01/tuxedo/docs11gr1/rfcm/rfcmd.html#wp1032112

  Kind regards
  Malcolm.

• How to stop the remote control to the setting

  How to stop the remote control to the setting

  Disable the settings > general > accessibility > voiceover.

• How can I block a remote content after letting the remote content

  There was no remote content - an email I thought I'd have a play around with the 'options' and then selected "allow remote content for...» "now, the option button has disappeared - but now I want to block the content then how to bring back this option so that the emails from this domain are not remote content?

  I tried to look in the forum but have failed to find a solution to the problem. It was suggested to change the config file changes to the content of mail.trusteddomains-, but this was already empty.

  I'm surprised that the option is available to remote content, but it "button" to select then disappears and there is no obvious route to the remote content of this domain/address blocking.

  Try this:

  "Tools" > "Options" > "Privacy".
  OR
  'Icon menu' > 'Options' > 'Options' > 'private life '.

  It says "Content of Mail" at the top and on the right it's the 'Exceptions' button
  Click 'Exceptions '.

  You should now be able to highlight the "site" then click on the button 'Remove Site'.
  Then click on the close"" button.
  Click "OK" to save and close the Options.

• How can I go to watch Apple TV watching television (cable) without changing the remotes?

  How can I go to watch Apple TV watching television (cable) without changing the remotes?

  You can't do that.  The feature that turns on the TV and the entrance to tha ATV is nice, but is not able to remember what the original setting was and go back.

• How to recharge the remote control for Apple TV 4

  How to recharge the remote control for Apple TV 4

  Recharge your Siri or Apple TV Remote - Support Apple Remote

• How can you get firefox to work with the windows subst command locally?

  I want to test my Web site locally using the windows subst command to emulate the root of my site. It works perfectly with IE8 (except IE8 displays the different available to firefox) but does not work with Firefox. All images, sheets, styles and anything with a root path does not work. If I use a relative path (.. /.. / for example) to the objects that they works very well.

  How can I view web pages locally by using a path root of Web site?

  Firefox does not allow access to local files.
  
  It is always best to use relative addressing.

  See also:

  • http://KB.mozillazine.org/Links_to_local_pages_do_not_work

• I have two Apple TV. The remote control that interferes with the other. For example, if I press stop on the distance she also those other programs. How to do this?

  I have two Apple TV. The action on each distance affects the other tv. For example if I press stop on the remote control will stop the program on the other tv to. How can I stop this from happening?

  Easy.  You must associate each ATV with one of the remotes.  Each ATV is not paired and will 'listen' to any distance.

  The trick is to cover before the other ATV when matching so the two do not listen.

  Silver or white remote control: pair or cancel the twinning of the Apple Remote with Apple TV (3rd generation or earlier)-Apple Support

  Siri remote control: http://help.apple.com/appletv/#/atvbc9953e63

  Don't know what models you have the ATV, but the whole process is the same:

  1. choose a remote control and an ATV.  Cover the front of the another ATV.

  2. hold the remote control in 3 inch they recommend, pair it with appropriate above process.

  3. choose the other remote, unlock the first ATV and block that you just paired.

  4. hold the second remote control 3 inches from the second ATV and pair it with appropriate above process.

  5. release the first ATV and enjoy.

• SOLUTION - How to use the remote on the Satellite X 200 with Win7 64 bit

  Here is the description how to use the remote control on the Satellite X 200-2 b with Windows 7 64 bit.

  Thanks for the link.

  It will be fine if some owner of Satellite X 200 can confirm.

• Re: Satellite Pro C660 - how to do the recovery with command prompt disc?

  I have a brand new Pro C660 of Satellite. It worked fine for a day, now it will not load windows. I don't have to create the recovery disks, as I only had a few hours (Yes, Yes, I know, should have been the first thing I did). All data are present (but backed up just in case USB) and I can see the folder HDDREcovery with all data intact. However, I can't run the application to create recovery discs. Does anyone know how to extract the images and create the media using only the command line? (I can go into command prompt by booting from the Windows 7 disc a friend). All options fail own laptop startup disks. It says 'Windows does not load' and I try startup repair, but it detects no error. Any help/thoughts on this will be greatly appreciated!

  Hey,.

  It of not possible to create the drive with command prompt recovery. You must use the Windows Toshiba Recovery Media Creator.

  Now it s too late for you, but you can order a disc here:
  https://backupmedia.Toshiba.EU/landing.aspx

• Re: How to reconfigure the remote control for Qosmio F50?

  Hello
  I have a Qosmio F50, which came with a standard remote control for applications like media library etc, how do I reconfigure the keys to do exactly what I want it to do?

  For example the button power on the remote control to completely stop the machine instead of standby

  Thank you
  Dan

  Hello Dan

  Why do you think something like this is possible? What is this described in s operating manuals.
  If something like this can be done, it must be described in the manuals?

  In 10 years Toshiba has offered several different notebooks with the remote, but something like this was never possible and remote control buttons were always with defined function.
  You have some really cool ideas.