How to: 8315793 - keyboard use to reduce the results area

Similar Questions

• How to reduce the coverage area

  Hello

  We have our office in a campus IT several floors with other businesses in the area. We plan to go wireless in the whole of the Office (full 1 floor). Can we do anything to reduce the signal from outside the offices in order to avoid the attacks/hacks? We use 1240AP.

  Outside the use of security, I want o know how to reduce the coverage area... the parameters of power etc.?

  Thank you

  There are a few things that can help.

  Placement of the AP, down the power, by cutting basic-rate further down to shrink the cell, using directional antennas to better focus the signal and the deployment of obstacles that affect signals (sheet Tin, plants, people, etc.).

  It will take some creativity, planning and measurement

• How many computers which can install you programs CC on and how many computers can use programs at the same time? [was: Question for you!]

  When you buy an individual monthly plan for CC at $50 per month, how many computers which can install you programs CC on and how many computers can use programs at the same time?

  Thank you for your answer!

  You can install the software on two computers. These two computers can be Windows, Mac OS, or everyone. If you install on a third computer, you will be asked to turn off this feature on the other two computers. You can then re-enable one of the two previous computers and use Cloud Creative apps on it. You can use apps on a single computer at a time.

  Kind regards

  Hervé Khare

• Missing notification icon for wireless keyboard and mouse in the systray area.

  Missing notification icon for wireless keyboard and mouse in the systray area. Was working before the hard disk crash. Had to reload Windows Vista 64 bit OS. Have computer model gateway GT5678.

  Chances are good the software to include these icons in notification tray cam pre-installed on the bridge.  If you still all original gateway software, try to see if something in the menu start / all programs of the gateway seems as it can contain controls for these settings and run the program to check and see if it does.  If none of the gateway software help (assuming that all this is still installed) and re-installing the drivers did not work and there is no controls at the keyboard or the mouse, so I know what else to think.  These icons are not available with Vista - they were installed by a third-party device or software driver.

  I'm sorry that gateway could not help you.  They are those that you need to do to solve this problem, because it is something that they installed with the original computer which is not re-installled after you change hard drives.  They should know what software for it and power point yoo to a download site, or you send a disk with this software.  We can't really do anything else to help you.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• When I use the function "cut", the line of results more sharpness compared to the original files. For example, {A: "file.psd"-> cultures 4x6inch, 300 dpi-> B: "cropped file.psd} then the results are as described as a first step. What s the problem.

  When I use the function "cut", the line of results more sharpness compared to the original files. For example, {A: "file.psd"-> cultures 4x6inch, 300 dpi-> B: "cropped file.psd} then the results are as described as a first step. What s the problem. (Photoshop CC, windows7)

  I'm a Retoucher of photpfile have used the CS2 version for many years, and fuction 'Harvest' is an important and frequent tree tools myself. The result of the broke lines drive me annoying cause my feeling touch Sofete are all blown away. Please help me.

  I think you're talking about using the crop tool? If you're cropping with a size and resolution that involves interpolation of the image, the crop tool will use your preference for the Interpolation of the Image. By default, bicubic is automatic, which can easily result in a sharp file. Change your preference (in general) to bicubic and you shouldn't see any sharpening.

  I hope it works for your situation.

• Once printed, how you fold a pdf so that the pages are in the order of reading?

  Once printed, how you fold a pdf so that the pages are in the order of reading?

  I think that I am not following you. In my opinion, a PDF file can not be folded; and whether the pages are in the reading order may not be modified by the free player.

• How to restore the size of the screen of search results? The place of departure of research is fine, but the results are so tiny that I can't read. Thank you.

  After the firefox search page appears and I launched a search, the results are back in very small print. If I have something to randomly select the page that opens is fine. The problem is only with the search results page.

  See this:
  https://support.Mozilla.com/en-us/KB/page+zoom

• Why all the results are duplicated when searching in my bookmarks library?

  If I search for "Shell", for example, and then click on the 'name' column, most of the 'results' are duplicated. For example, "Perdido | On Shell"in the"shell"folder Parent is shown twice... same URL and al. I see that the or after the 01/02/2013 added bookmarks are NOT duplicated.

  In my case, the bookmarks ARE actually duplicated. I checked by exporting and by analyzing the HTML code.
  The whole "All bookmarks" hierarchy had somehow been copied into a random location of my favorite tree. This is why all bookmarks except most recent lie twice.
  It looked like this:

  - All Bookmarks
    + Bookmarks Toolbar
    + Bookmarks Menu
       + MY_FOLDER_A
       + MY_FOLDER_B
       - MY_FOLDER_C
         MY_NESTED_FOLDER_A
           - All Bookmarks
              .... older state fully duplicated!!!
  

  I deleted the nested copy of "All bookmarks" and it seems OK now.
  I made this copy by mistake (which I highly doubt) or a bug caused.

  Good to hear that you are not using Firefox Sync (I use it). It would have been a Prime Minister candidate for causing a problem like this. (My bad favorites have been replicated to all of the computers connected with synchronization).

  The copy of "All bookmarks" should have been made over the past months, but I couldn't determine exactly when. The copies have the same ADD_DATE and LAST_MODIFIED timestamp in the HTML file.

• How autostart touch keyboard in landscape with the keyboard

  Hello

  How can I get the touchpad to auto-pop-up when I touch the search in the bar of charm in landscape mode? I noticed that it works when I put the monitor in tablet mode, but if I want to turn the connected keyboard monitor and use it as a touch interface I do not get the touch keyboard to auto-start.

  I have a stylus/Fujitsu T732 with win entry 8.

  Hi Shawn,

  Thanks for the reply.

  What was the result of the steps suggested earlier to solve the problem?

  If the problem persists, you can run the SFC (System File Checker) scan on the computer to ensure that the system files are intact. The tool (SFC.exe) System File Checker scans missing or system corrupted files and repairs them.
   
  Reference:

  How to use the System File Checker tool to troubleshoot missing or corrupted system files
  http://support.Microsoft.com/kb/929833/en-us

  Thank you.

• How close smart port used to connect the codec when it detects a codec?

  Guys,

  When our our use intelligent proximity via a wifi network that has a firewall between the network codec is on. The connection fails even the smartphone detects the codec very well. So I wonder what kind of Protocol and port the app uses to control the codec and receiving snapshots.

  any idea on this?

  Thank you.

  Lou

  Your question would be preferable, in the proximity of the forums section.  On the homepage there is a link to some frequently asked questionsand in the FAQ says how matching works.

  The Cisco proximity application pairings in the system using utrasound where he received the details on how to connect to the endpoint over HTTPS. This requires that the Pocket IE phone or tablet to be connected to a network where the system is accessible over HTTPS.

• How two different users using Lightroom on the same laptop?

  My wife and I have all two 5.7 Lightroom running on our desktop computers (both licenses). I installed it on my laptop. If my wife wants to use it on the same laptop (another user) how we do?

  He asks for a 'new' series number or actually attempted to enter the same serial number (sorry if you already answered this question).  It may be just trying to instantiate the application as a "first edition".  In fact, it can work with the same serial number that it will recognize that it is the same material and not a third facility.  If it gives you an error, I'd get this time in contact with a Support Adobe technique for registration by chat or phone issues.

• How to plan interfaces or packages, if the files are windows and my server is AIX 7.1?

  Hi Expertise,

  I have to plan the interfaces and packages in studio ODI tends in Windows and the server is located in AIX 7.1

  While I'm with Agent to run the interface, it is been display of the file not found error. But while running without an agent he was running, the files are placed in the windows system, but not the AIX server.

  but when I put these files in AIX, I am able to run the interface with the agent. but in my scenario, the files are regardless of operating system.

  Can someone help me in the performance of the interface in which the DISHES files are in the Windows system and ODI server is IBM AIX 7.1 server.

  Please help me correct on how to program (I just calendar because, if the interfaces are able to run with agent then obviously they must provide, please correct me if I'm wrong.  ) interfaces using agent. ???

  I am very new to AIX.

  Thank you

  Shakur.

  1. Install Agent ODI on Windows Server? It solves your problem.

  2. the second way is sharing directory with files Windows OS using samba, and your agent on AIX server could take the files in the shared directory

  IBM how to export a share in Windows and mount the disk on AIX with CIFS. -United States

  P.S. I have never work with AIX, but do the same patterns on Linux

• How UNSYNC Mac Mail and Gmail, so the messages are only 'read' on each device?

  Hello

  I use Mac Mail and Gmail with my own domain through Google Apps.

  My account managers have personal emails (IE [email protected] & [email protected]) and they also have an email that they all use two ([email protected]) which is set up on both of their computers for if someone is sick, they know what the other is working on.

  The problem is that when one of them reads an email on the "[email protected] email, mark it as read on the enamel of the other person too.» Is there some way to do so a new message arrives and he scored only as read email when each person reads it?

  Thanks in advance.

  I don't think so. Google apps uses IMAP or ActiveSync, which are intended to reflect all changes across the mailbox is used. Looks like you're after more than one distribution from the list which will copy the email in each personal users box, as a list of all the staff, but as you have several accounts, which could become confusing.

  It might be worth looking at login via POP - if Google allows. POP basically just download all will send them on the sync server and custom changes (providing check you what are the options in the account settings). It is not guaranteed that POP is not generally pushed, so will check every 5 min or so - and if someone read and email deleted at this time, it will not download a copy.

  Alternative would be to set up rules that transmits an entrant copy each users mailbox and that filter in a subfolder, but this all duplicate and the habit of thinking whats been answered or deleted in the source mailbox.

  I hope that makes sense...

• Need to create useful reports from the results of TestStand (.mdb) database

  Any help is greatly appreciated!

  We need create reports from the results of TestStand (.mdb) database.  I was not able to find much online.

  Details:

  In 2014 TestStand, we have configured to use Access database management system.  Otherwise, the database settings are default.

  These reports will be targeted to managers and engineers.  They need to show objects as:

  Which EHR past/almost?

  For each DEGREE, what past/a failed test?

  Thanks for all the suggestions!

  Because I couldn't find anything pre-made, I created reports from scratch using queries in Microsoft Access 2010.

• Update statement can be used depending on the result cache?

  Hi all

  I stumbled on an interesting question. UPDATE statement is used in the following function, even if the feature is created RESULT_CACHE. It seems illogical. I was wondering, is it possible?

  If so, why RESULT_CACHE is used?  Because it means "do not execute the function, look for the result of the hash table and return the results to the user ' if the UPDATE statement, so doesn't mean it should run for each call and use with RESULT_CACHE and UPDATE/DELETE/MERGE is illogical or wrong?

  Thanks for your help.

  FUNCTION to CREATE or REPLACE plch_get_data (FULL id_in)

  RETURN VARCHAR2

  RESULT_CACHE

  IS

  BEGIN

  Dbms_output.put_line ('run');

  UPDATE plch_data

  SET nm = UPPER (nm)

  WHERE id = id_in;

  COMMIT;

  RETURN "SUPERIOR."

  END;

  /

  Yes, it's the challenge of PL/SQL quiz - and the point of the quiz is only automatic relies on parsing by Oracle only supports arrays of account that is QUESTIONED.

  The tables that are affected by DML not a query as an update do not figure in automatic invalidation of a cache.

  I was hoping that the explanations given in the questionnaire itself would not lead to a thread - rather it would provide a pleasant and clear answer. So feel free to let me know if you think otherwise.

  As to why Oracle would let you include DML not a query inside a function of caching of result, well... I can easily accept that you shouldn't do this - in general. But I don't see that we should make it impossible. It would probably be a good candidate for an another PLW (PL/SQL warning), as in:

  "Non-requetes DML in a result caching function will not affect caching and can result in unexpected results."