How to accept 3rd party in settingsh applications
Where is the setting to accept 3rd party applications
Virtually all of the applications in the App Store are 3rd party applications. Apple offers only a very limited number of applications. Do you have restrictions to download apps? Settings > general > Restrictions > installed Apps > off?
Tags: iPhone
Similar Questions
-
I don't like to accumulate 3 cookies and would not simply check accept first-party Cookies 3rd box in preferences. BUT I have to accept 3rd party cookies to use the web page from my Bank, a separate site that manages some of their transactions (such as payment of invoices). This means that I have to accept 3rd party cookies, and then remove them by hand, OR should I check accept whenever I use the website of the Bank and then uncheck the box when I'm done.
I don't think, but it's easy to do it every time you visit. Simply, you click the CM then stationary on Third Party Cookies and then click temporarily allow all. Then you do the same thing, but use the option to revoke to deny again.
Note: It is not allow temporarily 'everything' (on each site) uses cookies, it allows only those of this site. But I think that if you let authorized if they are used by another site, they will be able too.
Jack
-
How to combine 3rd party install and install generated by LabVIEW?
I am developing a software that controls a thermal regulator via a USB cable connection. I use NI-VISA to communicate with him. The controller uses a USB chip, for which a 3rd party USB driver is necessary. (I downloaded from here: http://www.ftdichip.com/Drivers/D2XX.htm)
Now the software is finished, I created the application successfully. In my Installer, I am hoping to enter the 3rd USB driver so only installer does all this, instead of running 2 installers.
LabVIEW Installer construction specification property dialog seems to support only the drivers of OR. Is it possible to include the USB driver in my Installer?
Thanks in advance
TailOfGon wrote:
1 is simple. Use the executable installation program provided by the Web site. But I do not know how best to include in my LabVIEW App Installer.
We don't know if you're aware of this, but you can configure the installation program to include the executable files and then run the file at the end of the installation. It should be in the Advanced page settings of the generation.
Also, there are 3 party like Inno Setup installer programs, which have more options, and that you could use to encapsulate two installers. I did use one of those, but I know other people who prefer them.
-
I have a 8530 with a memory card of 2 GB and Verizon Wireless new (if it matters). I downloaded a trial version of a 3 rd-party for geocaching (CacheBerry) application, using Desktop Manager for the process of application for Macs. The application does not appear in the main menu of the application file, but if I go into options > applications, it appears in the list. However, I can't understand how the open - all I see are delete or modify permissions and properties of the app. Any help for a newbie here?
Thank you.
AHA! Found in downloads and was able to open from there. I don't know why some applications go to downloads and others go to the applications folder, but I was able to move to a more intuitive folder, too.
Solved
-
How to remove 3rd party applications
I've updated my 5S for ios 9.3.1, i Down and maintaining app iphone, it only squirm but was not 'x '.
Any suggestion what to do?
Check the settings > general > Restrictions > removing applications. Make sure that you have disabled it.
-
citing the 3rd party link browser application
Since no one responds, I'll give what I can.
I think you have two choices, I have used and tested any of them, so it's quite reading.
(1) content - in this case manager you'd download link managed by your specific applications - I think it will take an effective link
(b) HttpFilterRegistry - in what provide you the response to the browser - so you can tell her something simple like "start application" and then perform processing in your own application.
Take a look at them and see if you can understand. I also recommend looking up in the forum, because I am confident this question was asked before.
-
How to install 3rd party LUT to first Pro CC 2015?
I have a few LUTS free I want to try but I am also interested in buying some. I use them a lot for creative reasons. I use especially in the Panel of creation that are the LUT .looks. The LUT I downloaded isn't .looks. Nevertheless, even if they were I have no idea how the in there. If they are .looks can I just put them in the folder? I'm on Mac OSX, Btw.
If they are not .looks where can they go? What folder is the folder that contains the LUT in the basic correction?I am also interested in more free LUTS and I would buy a suite of LUTS that gets me pretty much all that I need. I like some movie LUTS, but I will especially for use as a creative thing type. I found a few online companies, some are $ 20 for a suite, some are 50, and some are $ 200. I have no idea who is trustworthy, which was worth LUTS, etc.. If you know a site that sells and offers possibly the some free let me know.
Other than that, how to do it here if it's not a .looks?
-
BlackBerry smartphones backup 3rd Party applications
Hello
I tried to search this... maybe I did not put in the string to the right of the words... How should we do about backup 3rd party applications. I got the error 523 or what it is... where I basically have to reinstall everything on my phone. I can usually pull the backup of the emails/contacts/my computer but I do not know how to save my 3rd party apps specifically.
In addition, because I ask anyway... anyway is to wipe my phone completely using Desktop Manager? I heard people say that they use JL order or whatever... I am familiar with this program and I was wondering if there was a way through before DM I look for another program.
I appreciate the help in advance.
Here is a great link that provides instructions step by step on how to backup 3rd party applications (to note that you will still need to enter your licenses after for those who require licenses): http://forums.crackberry.com/f3/how-back-up-3rd-party-applications-53201/
If you just want to reinstall the OS you have on your phone, JL_CMDER is the simplest method (otherwise you must first downgrade, then you spend again). To make it as easy as possible, all you need to do is to download the non-installateur version of JL_CMDER (it's a zip file, you can easily extract in Windows). Run JL_CMDER and select option 4 to wipe the phone. Follow the remaining steps and will be wiped for your operating system (your phone will be error 507 on it once it is completed successfully).
Then you can reinstall the operating system using the manager desktop or via the Loader.exe file in C:\Program Files Research In Motion\AppLoader.
It is the best way to simply reload the same OS. But if you do not want to, and if you are able to find a downgrade to (e.g. 4.7.0.65) file, you can do the downgrade first and follow her again by the upgrade.
I hope that made sense but let me know if you need help with this. I'll be on the forums for about over the next 45 minutes or more.
-
3rd party Software to integrate with the current application
Hi all
Could you please me (simple steps-;)) how to use 3rd party software to integrate with current (ATG) application.)
Example: cybersource (validate the address and the credit card), for this what are the steps we must follow and we need create components to configure the software.
I'd appreciate if you share the resolution, it will be useful to others too.
Kind regards
Jyothi.MJI think it would be a good start
http://www.Scribd.com/ron_gelinas/d/64173966/41-integrating-CyberSource-with-ATG-Commerce
Thank you
-
When firefox will stop support 3rd party cookies by default much like Safari doing now?
Safari by default does not accept 3rd party cookies and it was reported that Firefox will follow suit. No information regarding the chronology as when it enters into force would be highly appreciated!
Thank youNew or changed rules cookie generally applies to new cookies. If the behavior of existing, normal and third-party cookies, should not change. What does not change that is the default behavior of the new third party cookies.
-
How do I share files on Xbox 360 without Windows Media Player or 3rd Party applications
Windows 7 sharing media files to the xbox 360 without media player
I know that I can use Media Player 12 in windows 7 to share files on xbox 360 using the libraies, but I used to be able to share without media player and I would like to be able to do it again, but I can't seem to get my shared folders will appear on xbox. I don't know if I need to use folders to share public or not, but someone has all the answers on this for me?
I use my xbox 360 to watch the video content streamed from my PC pretty much every night through a continuous connection to the xbox. You do not need Media Player or any other 3rd party application to video media IF THEY ARE THE RIGHT SIZE for a XBOX, you just need the PC configured for videos, turned on and networked with the xbox
It is simple and quick, and depending on the content, there are two methods that I use:
(1) as Etzel42 has described - in Windows 7 Control Panel > network and sharing Center, go to Advanced sharing > Media Streaming, select "chose the flowing media options...» ». If the Xbox 360 is running and put in place on the same (Local) network as the PC it will be displayed here but the value "blocked." Just change "Authorized" and click ok. (If you do not see the Xbox 360 listed here then the Xbox and PC cannot see each other on the network. You must address this issue before anything else).
Once that streaming media is running, the video files you want to share with the Xbox is in addition to your video library. This can be done in en allant going to the computer, right-click on the 'Vidéos' library, go to 'Properties', then include the video or files to share. As a double check that all video files are available for the Xbox, open Media Player and see if he can see all the files/folders that you added. Close Media Player now, you do not need it works for watching videos on the xbox
Now, go to the Xbox, go to the dashboard in my Xbox and video library. You should see the name of your PC as a selection. Open it and then open the folders that you added to PCs video shops and once again, if media files are in the right play on the Xbox, watch now format!
(2) configure the Xbox Extender and Windows Media Center, and then run Media Center on the Xbox, this will allow you to play any kind of media format on the Xbox that you can play on the PC. It is ideal to play the Xbox formats cannot be opened natively too, it's pretty darn picky.
In both methods you have not need of any application is running on the PC. Simply be turned on and available for the Xbox via the network. The Xbox will do the rest. In fact, one nice feature of the library on the Xbox 360 is that if your PC is in standby (Sleep), Media Center will wake up the PC.
-
Libretto W100 Windows 10 - all features via 3rd party (instruction) applications
Recently I was hunting for a UMPC to buy and who to is passed through a W100 on EBAY, and after a brief google I bought it immediately!
Its an amazing device, but Windows 7 really does fall. It's slow, unwieldy, and honestly not too usable.
However, Windows 10 is worlds apart when it comes to touch usability! Combine with Toshiba idea of the full screen keyboard and a virtual trackpad and the W100 a laptop full blown surprisingly usable. Win10 runs miles better than Win7, and things like scroll, zoom and pan is via texturing (like the iPad) so its smooth as!
https://www.YouTube.com/watch?v=CLWvmohEuz4
Working
10 home edition
Two multi-touch screens
Keyboard touchscreen (3rd party)
Touch Screen Touchpad (3rd party)
Shortcuts to physical key (via scripts)
Toshiba Eco
Toshiba memory cards
Toshiba Reeltime
Toshiba face recognition
Toshiba sync utility
Toshiba media controller
Webcam + ApplicationDoes NOT work
G - Sensor (displays can always manually turn)
Haptic (technically it works, but only with the booklet software, which does not work)
Booklet (unfortunately unstable or unreliable on Windows 10) softwareThe process is relatively easy, just time-consuming! That said, I take no responsibility if you follow it and he won't!
Windows 10 Upgrade
Requirements:
Libretto W100/W105 running the version of Windows 7 with all the software and drivers installed.
Last update of the BIOS
External keyboard / mouse
Download this driver- Update for SP1 and install the new updates available via Toshiba Service Manager
- With SP1 is installed, you will become eligible for the 10 free Windows Update. This allows to upgrade your operating system.
- Follow the steps in upgrade from Windows 10 (I tested and BACKSPACE work!)
- Install the above driver. Accept the warning about it being old and restart.
- Click Start, type "Control Panel" without the quotes and then open the control panel
- Open Tablet PC settings
- Click on Setup. Tap the screen to highlight and press ENTER. The second touch screen and press ENTER.
- Click Reset under internal Toshiba Panel 1024 x 600 1.
- Select the Panel 2. Toshiba internal 1024 x 600
- Click on Reset
- Select the Panel 1. Toshiba internal 1024 x 600
- Click on calibrate and complete.
- Select the Panel 2. Toshiba internal 1024 x 600
- Click on calibrate and complete.
- Close the Tablet PC settings window and return to the control panel
- Open programs and features
- Uninstall the software booklet (keyboard/touchpad. They do not work properly / at all in win10)
- Uninstall Toshiba Bulletin Board (accidents constantly)
- Uninstall Toshiba Bulletin Board customization (useless without above)
- Uninstall XT9 smart input (does not work with other keyboards)
You should now have a functioning entirely Windows 10 with two sites of touch screens as expected. The keyboard touch windows appear when you need it, but its way too small to be practical. Enter comfort keyboard. It's like the idea of keyboard Toshiba come with on steroids!
I would recommend you first get the installer how I, to ensure that it works with the operating system correctly, and then customize from there!
* Due to message size restrictions, it will be instructions to multipostKeyboard touchscreen
- Download Keyboard Comfort and install it. I support fully for buying this (I did it) is the ultimate W100 keyboard! (Free trial version is available)
- On the greetings page, check all the options and click Next
- Select the type 'MiniUnispaced' and whatever style you like
- Check "show only labels and icons...» "and click Next
- Check only 'use the movements' and "Adjust the width" and click on finish
- Right click on the new icon of keyboard on the task bar and choose Options. Move the window to the TOP of the screen
- Under properties of the hand, make sure that everything is checked
- Under keyboard shortcuts set visibility to CTRL + ALT + CAPS
- Under hotkeys value next keyboard CTRL + ALT + TAB
- Click defined the list of keyboards. Click on uncheck all.
- Check 'MiniUnispaced' and 'StandardBigAlpha' then 'Standard' then 'TwoSides2' and click OK
- Under the Visual keyboard, make sure that everything is unchecked
- Click Advanced..., and then click on the new window
- Check only «check any application as a web...» «, «do not move the keyboard to the screen...» «and to «Prevent the mouse...» ' and click OK
- Press the button of keyboard on the taskbar. Make sure that the keyboard appears on the screen at the bottom. If not: open Notepad (or anything with a text cursor) on the bottom screen and press the keyboard icon again
- Hide the keyboard by pressing the icon again and go back to the options window
- Under Position check only "lock". This will ensure that the keyboard never appears on the screen to the bottom and never the top!
- Under Zoom to ensure "Fit width" and "Height" are checked with any unchecked
- Click Save
- Click on the keyboard icon to display the keyboard
- The theme of the transparencies of Opaque background value, then use the common transparency slider to make the keyboard at your convenience. Feel free to play with other settings here.
The keyboard is now set up and has to much as the Toshiba did. The final step is to link to the keyboard key!
To do this, you must create a VBS script to send the shortcuts that the program uses.- Open Notepad, and then put this:
Set WshShell = WScript.CreateObject ("WScript.Shell")
WshShell.SendKeys "^ % {CAPSLOCK}. - Save on C:\TOSHIBA\ (or anywhere you will not accidentally delete/remove go!)
- Type of change SaveAs 'All' and call it 'Show the Touch Keyboard.vbs'
- Keep it open and change it to look like this:
Set WshShell = WScript.CreateObject ("WScript.Shell")
WshShell.SendKeys "^ % {TAB}". - Save slot in the same place, change the SaveAs type for 'All' and call it 'switch Touch Keyboard.vbs.
- Close Notepad
- Click on start and type 'button '. Open the program of Support of Toshiba Button.
- Select the button KB (single click) and select Browse. Select the "see the Keyboard.vbs button.
- Click Save. The program closes, so you will need to re - open.
- Select the button KB (Double click) and select Browse. Select "Switch Keyboard.vbs Touch.
- Click Save
The button on the keyboard should work correctly now!
-
I want to develop an application with the Ribbon UI by using a 3rd party control
I want to develop an application with the user interface of the Ribbon using a 3rd party control, that I have to get a license from Microsoft? How?
original title: license of the Ribbon user interfaceI want to develop an application with the user interface of the Ribbon using a 3rd party control, that I have to get a license from Microsoft? How?
The only a link I found on this page does not (http://msdn.microsoft.com/en-US/office/aa973809). -
How to submit form data to the REST 3rd party API service
Hi guys,.
It's new to me, so the sample scripts and procedures will be appreciated.
Problem:
My client has opted for a more advanced 3rd party CRM solution that uses REST APIs
They want form data entered (form join us) and submitted to the 3rd party CRM
Examples of available API CRM scripts are PHP and makes no sense to me.
It is their example of form and php script.
Issues related to the:
(1) how to convert this works in British Colombia
(2) is it possible to use liquid as a script to make the API calls server side?
(3) also would like to hide the username token and API?
Samples:
< ! DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional / / IN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd" > ""
< html >
< head >
< meta http-equiv = "Content-Type" content = text/html"; charset = utf-8 "/ >"
< style type = "text/css" >
label, input, textarea {display: block; float: left; width: 150px; margin: 5px ;}}
label {clear: left; text-align: right ;}}
input [type = 'submit'] {width: 60px banner; margin: 10px 0 0 165px; clear: left ;}}
< / style >
< / head >
< body >
Contact us < h2 > < / h2 >
<! - Edit REQUIRED with the file name of the script if different from the example - >
< do action = "Solve360ContactSave.php" method = "GET" > "
< label > (required) < / label >
< input type = "text" name = "FirstName" value = "" / > "
< label > name < / label >
< input type = "text" name = "lastname" value = "" / > "
< label > title < / label >
< input type = "text" name = "jobtitle" value = "" / > "
< label > Business email < / label >
< input type = "text" name = "businessemail" value = "" / > "
Note < label > < / label >
< name textarea = "note" cols = "4" rows = "4" > < / textarea >
< input type = "submit" value = "Save" / >
< / make >
< / body >
< / html >
PHP:
<? PHP
version 2.0
All of the placeholders like {property}, {categoryId}, {templateId} expected
be replaced by actual values without the {} brackets
REQUIRED with your email address edit
define ('USER', ' [email protected]');
Edit REQUIRED by token, workspace > my account > QAnywhere > API Token
define ('TOKEN', 'life');
Get request data
$requestData = array();
parse_str ($_SERVER ['QUERY_STRING'], $requestData);
Configure the service gateway object
need to 'Solve360Service.php ';
$solve360Service = new Solve360Service (USER, TOKEN);
//
Add the contact
//
$contactData = array)
'Name' = > $requestData ["firstname"].
'name' = > $requestData ["lastname"].
"jobtitle" = > $requestData ["jobtitle"],
'businessemail' = > $requestData ["businessemail"],
Category of OPTIONS apply tag (s) and set the owner for the contact from a group
You will find a list of identifiers for your labels, the groups and users in the workspace > my account > QAnywhere
To activate this option, delete the following text:
/*
Specify a different property for example share item
'property' = > {property},.
Add categories
'Catégories' = > array)
'Add' = > array ('category' = > array ({categoryId}, {categoryId}))
),
*/
);
$contact = $solve360Service-> addContact ($contactData);
If (isset ($contact-> error)) {}
Post yourself if errors occur
mail)
USER,
"Error when adding contact to resolve",
' Error: '. $contact-> errors-> asXml()
);
Die ('system error');
} else {}
Get the new contact params of the answer
$contactName = (string) $contact-> article-> name;
$contactId = (integer) $contact->-> id;
You post the result
mail)
USER,
"New contact added to solve."
'New contact' '. $contactName. "" with the id '. " $contactId. "has been added to Solve360.
);
}
//
OPTION add an activity
//
/*
* You can set an activity on the contact you created
* This example shows how to create a Note, to enable this feature just uncomment the following application
*/
/*
Preparation of data for the note
$noteData = array)
'details' = > nl2br ($requestData ['notes'])
);
$note = $solve360Service-> addActivity ($contactId, 'note', $noteData);
You post the result
mail)
USER,
"Note was added to" "." " $contactName. "" contact to solve ","
'Explanation '. $note-> ID "has been added to the contact with the id". $contactId
);
End of the addition of note activity
*/
//
OPTION of inserting a business model
//
/*
* You can also insert a template directly into the contact that you just created
* You will find a list of identifiers for your models in the workspace > my account > QAnywhere
* To enable this feature, just uncomment the following application
*/
/*
Beginning of the application model
$templateId = {templateId};
$template = $solve360Service-> addActivity ($contactId, 'model', array ('templateid' = > $templateId));
You post the result
mail)
USER,
"Model has been added to" "." "" $contactName. "" contact to solve ","
'Model with id '. $templateId. "has been added to the contact with the id". $contactId
);
End of the model application
*/
? >
< ! DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional / / IN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd" > ""
< html >
< head >
< meta http-equiv = "Content-Type" content = text/html"; charset = utf-8 "/ >"
< / head >
< body >
Result of < h2 > < / h2 >
Thank you < p >, < b > <? PHP echo $contactName? > < / b > < / p >
< p > your data has been successfully saved. < /p >
< / body >
< / html >
You cannot use the server host-side or liquid code on BC for this.
You need to be to have some sort of configuration to point to a 3rd party solution that sends data on them or you need to implement and solution from API to API.
A form will create a deal (or order if take payment) and you can have the BC API sends a url to the notification when cases are triggered. With your own code solution read you cases, get those to the shape you want and send the information to the 3rd part of the data structure they need. -
How Oracle Clusterware Oracle RAC and 3rd-party Clustering with them
I have some questions on how Oracle, Oracle RAC and 3rd party clustering CLusterware fit between them.
Q1. My understanding is that the Infrastructure Grid Oracle Clusterware is Oracle's Clustering solution that allows applications to cluster? that is, it is a general clusterware solution to compete with those already on the market. Is this correct?
Q2. So why CARS is necessary for the Oracle cluster databases? An Oracle database is not just considered one application like any other? So why can not just use you GI / Clusterware to gather what you would do for any other application? Why so you need RAC to the Clusterware Summit?
Q3. Is it is possible to combine an Oracle database using 3rd party of clustering and not use Oracle Clusterware and CARS at all that is can you say cluster, an Oracle database using say Sun Clusters, Clustering AIX or Linux native same clustering?
Q4. If the RAC is purely for Oracle Cluster databases - what is with the title "Real Application Clusters"? What's real on this subject?, what to ask?
Q5. I also read that RAC can use 3rd party of clustering. However if you decide that this is the case, then you need to install Oracle Clusterware when even (I think for interconnection must be created to allow the merger with Cache between Instances of node?).
Is this the case? If yes why never bore you with 3rd party clusters? -Since you will have to install Oracle Clustering anyway - and I probably have to license (all I can think about is the scenario that you already have a cluster of 3rd party in place and you decide that you need to use the same material for a database cluster)?
All wisdom greatly appreciated,
Jim
Yes, with 10g, you had to use the CRS, and with 11g, to use the GI. For 9i RAC, you would use Verits Cluster and Sun Cluster or anything else.
11g RAC to GI. As above, you can use clusterware extra if needed. I gave the example above where to a 10g RAC we used the CRS to the cluster database/listener/vip and allowing groups of volume and filesystem in HACMP cluster. File systems were not shared, but could switch to another node failure node, who has been treated by HACMP. The volume of the groups containing the raw devices were shared volume groups. For 11g, I never used extra clusterware on top of CRS and have always used ASM which is part of the GI.
The application provider only certified database to run on 10g on AIX with raw devices. What is strange about that? It would be unusual that you probably expect to use ASM instead of raw devices, but it is what it is.
See the following Note of Oracle for more information: using Oracle Clusterware with vendor Clusterware FAQ (Doc ID 332257.1)
It is perhaps easier to explain if you can explain what problem you are trying to solve?
Maybe you are looking for
-
The update of Google Talk/voice
Because I got this message 'Download the plugin Google Voice' when I try to make a call to Google Mail, and I couldn't find fixes posted here or on Google, I thought I would leave a note of 2013. I went through all install it for Google Talk and seem
-
Bad drive capacity utility display
So I had initially ReFind to dual boot my macbook but recently removed in order to reactivate the FireVault. After that I uninstalled and checked that he had disappeared, I deleted the 200 GB partition containing linux startup. There are 3 partitions
-
Satellite L505-141 - update the display driver?
I want to update the 5156 ATI mobility radeon video card driver. I checked in the Device Manager the driver already installed on my machine, the version of it is 8.653, similar to that offered by download herehttp://EU.computers.Toshiba-Europe.com/in
-
Microsoft Update KB979482 failed with error 80073712
I have Windows Vista on my PC. All updates will install properly. For example, the update has been MS security definition 1.87.1452.00 from today (07 Aug). However, this specific update (KB979482) allways fail to update due to the error 80073712. I h
-
. How can screen and icons upside down - I fix it?
My wife has used to clean the computer keyboard laptop while the unit is on. Well now the screen and the icons are 180 degrees backwards. I can't figure out how to rotate the screen and icons back. Any ideas? I forgot to mention that when I shut