How to access human management task using TaskQueryService?
HelloI want to access human task payload programmaticall attributes from a java application customized using TaskQueryService.
Could you please share some snippet on how to do it?
I have a task of string parameter named param1 which I want to access.
Kind regards
Sam
Hello:
Take a look at this post: http://beatechnologies.wordpress.com/2011/08/24/
Also here is the Oracle Doc: http://docs.oracle.com/cd/E12839_01/apirefs.1111/e10660/oracle/bpel/services/workflow/query/ITaskQueryService.html
and:
http://docs.Oracle.com/CD/E17904_01/integration.1111/e10224/bp_worklistcust.htm#BHAHBHID
I hope this helps.
The best
Rolando
Tags: Fusion Middleware
Similar Questions
-
I recently downloaded Secure browser review for a test in Spanish for a class. I uninstalled the program successfully, however I still can't access my Manager tasks, Shut Down, restart, sleep and Hibernate options went on the Start Menu. Finally, before taking the test, my computer is always locked. This means that whenever he 'slept' that I have to enter a password or use my HP SimplePass of fingerprint to unlock. Now, it does not require a password, or it is not locked.
I don't think SEB is not completely uninstalled, or he changed the settings on my computer and I can't figure out how to change their return. Help, please!
Original title: Secure Browser review
Hello
Do a system restore, if necessary in Safe Mode, until you have installed the browser...
"In Windows 7 system restore:
http://Windows.Microsoft.com/en-us/Windows7/products/features/system-restore
'Advanced options boot (including safe mode).
"The Advanced Boot Options screen lets you start Windows in advanced troubleshooting mode. You can access the menu by turning on your computer and pressing the F8 key before starting Windows (press F8 at the rate of about once per second)"
See you soon.
-
due to corrupt files, I had to reinstall windows 8.1. before you reinstall, I saved my thunderbird profile, I have now to restore this profile but can't find how to access the Profile Manager, can anyone help please? I downloaded Thunderbird 17.0.8
Press the Windows key and R, then type thunderbird.exe Pei
http://KB.mozillazine.org/Moving_your_profile_folder_-_Thunderbird
-
Hello
DELL powerconnect 6224 reference.
I want to access the management of a different VIRTUAL LAN VLAN.
The management of VLANS is 100 of VLAN. not the routing
My computer is vlan 60 (192.168.60.10) and I want to connect via ssh or http (192.168.100.1) to manage my switch.
Thank you for your help on the command line
The management of VLANS on the 6224 is not routable. So, you will not be able to access VLAN 100 from any other VLAN. However, you can manage the switch from other VLAN IP addresses. So if VLAN 60 has an IP of 192.168.60.1 you can http and ssh to it. And if the VLAN routing is enabled you have access to 192.168.60.1 on the other VLAN.
See you soon
-
How to access the managed bean taskflow action result?
Hi all
I have a requirement where I have two areas of text (username and password) and a SignIn button. When the user clicks login, my action managed bean will run the view object and get the password for this user name. And that's why it will compare the password presented by the user and the password came from the view object. I a taskflow, in which I have two points of view, we're signIn page and other is the home page, and the result of the action is successful.
The managed bean method here signIn Page for SignIn button.
public String execute() {}
String EnteredPassword = PassEncrypt();
ApplicationModule am = ADFUtils.getApplicationModuleForDataControl ("AppModuleDataControl");
ViewObject myView1 = am.findViewObject("LogindetailsView1");
System.out.println ("Usrname is" + this.) (Username);
myView1.setNamedWhereClauseParam ("v_Username", this.) (Username);
myView1.executeQuery ();
DCBindingContainer links =
(DCBindingContainer) BindingContext.getCurrent () .getCurrentBindingsEntry ();
DCIteratorBinding empIter = bindings.findIteratorBinding("LogindetailsView1Iterator");
String DBPassword = empIter.getCurrentRow ().getAttribute("Password").toString ();
System.out.println ("password is" + DBPassword);
{if (EnteredPassword.Equals (dbpassword))}
Here, I need to call the result of success, which will allow the user to get access to the display of the home page in taskflow.
}
else {}
FacesMessage fm =
new FacesMessage (FacesMessage.SEVERITY_ERROR, "Please check your name of user and password",
"Please check your name of user and password");
FacesContext.getCurrentInstance () .addMessage (null, fm);
}
Returns a null value.
}
If this can be done using the method call in taskflow then how could use it in my script?
Please suggest.
Thank you.you have a rule of navigation between these two pages
If so, simply return the navigation rule nameif(EnteredPassword.equals(DBPassword)) { return "success"; }
-
Equium A200 - how to access personal Documents by using the other account
My laptop Equium A200 - my OS Vista home Prem
During a visit to support symantec a technician took the remote control of this laptop to re - install Norton 360.
On the restart, I noticed that the office is back in yellow as a guest user account.When I got back to normal use, I found that I was blocked on the user account that he started seeing the message from GROUP POLICY has NO CLIENT CONNECTION. ACCESS DENIED.
Fortunately, there are two accounts and I can use the other, but all documents, photos, music, & favorite disappeared.
Nothing has been saved because of the original problem of N360 & Symantec can't help.It is not a password problem, it is not a.
How can I go back to the account and it is likely to recover the missing files?Thanks for any help, Colwyn
Hello
You can copy the files such as photos, Favorites, etc. the old folder user (account) to the other folder of the user.
This could be done following these steps.
Go to the Vista C partition :-> user
Here you must choose your old user account
Then choose all files and copy it to the new user folder.
The new user folder has the same name as the user account.This should help you to get access to files using different account
-
HP ENVY Ultrabook 4-1130us - how to access Raid management screen?
I previously removed the 32 GB SSD RAID so that I could use a SSD 128 GB for the operating system, now that I don't have the 128 GB, I want to go back to the 32 GB and activate intel SRT... Unfortunately, I can't seem to be able to access the screen of the raid controller... There is no prompt to press Ctrl + I like it used to be...
How do I re-solve-the raid on my SSD?
Corrected a problem... apparently so that windows 8.1 controller is unable to properly interact with it.
To fix: install windows 8... RAID configuration, then with her still active, install windows 8.1
-
PowerConnect 2724 - how to access the managed mode
I have a Dell Power Connect 2724 performer in our network. Since that it has been installed, it has failed but I would now add the ability to manage and configure remotely... especially so that I can activate a GigE at our NAS bundle
When I look at the switch I see MANAGED light is on but in this case how would I connect to manage it?
I see references to a default address 192.168.2.1 but that IP does not exist in our network domestic
All addresses of our home network are the DHCP pool given by our router from Virgin Media and are in the range of 192.168.0/24 so what should I do to access the port of the DELL printer management please?
When you have had access for the first time were all changed settings? You can try to disable any browser addons, cookies, clear cache, etc. Then try again.
-
How to access a pension case using the case number
I have a question which is considered by the media and I have a file number. I checked using my account, but don't see an option to access my cases. How can I use the file number to access the case?
Hello
Kindly click on the following link: https://www.adobe.com/cfusion/support/index.cfm?event=portal
You will be able to see all your open and closed on this portal.
If a case is closed for no more than 14 days, you will get an option to re open the case.
Hope this helps!
Kind regards
Shipti
-
How to specify wich Manager to use ODL
Hello
I built a custom of the FOAD Manager, but I can't do WLS to use it. Should what config files I change to achieve?
Thanks in advance.
NeuquinoAn example is given here: http://ananthkannan.blogspot.com/2009/09/how-to-configure-log4j-in-weblogic.html
and an old debate: How to use log4j in weblogic 10.3
-
How to access the 'Active Sessions' using MBeans
Hi all
I sent a request to the EM (Enterprise Manager).
When I have connected on EM and click on the app, I see the number of active sessions under the heading "Servlets and JSP.
How can I access this setting at the application level. ??
(I want to access this setting * 'x' * my web application and display registered users: x )
EM shows that the number of active sessions. It updates too... so there must be some beans or recording for this setting...
How can I access who...?
Kind regards
Durieux.
-
How to access Enterprise manager from another computer
Hello
I have Oracle 10g installed on a PC. I can access this PC EM.
I would like to know how to acceding Dbconsole EM from another computer on the same local network.
Thank you
RAFuser1749272 wrote:
Only, I solved the problem. It's the firewall blocks. Added the port 1158, then it worked.then, please provide 'useful' or 'correct' points as appropriate and mark it as "answered".
-
Running Windows Home Premium SP2.
I stumbled upon the answer to
of greggnlisa.
-Goto the start menu and LOCATE your command prompt (should be under the accessories section).
-Right-click on it and select "Run as Administrator".
-At the command prompt, type the following: net localgroup "Directors" "NT Authority\Service" / Add-Then press ENTER.
-Reboot and you're done.
I do not understand how it worked, but it took me several weeks to locate.
-
I am running XP. I've always been able to use pressing the Ctrl/alt/del keys simultaneously to start Manager tasks - useful to close a task does not. Recently, I had some changes due to a virus problem and now when I use Ctrl/alt/del, I get a message saying "disabled by the administrator. I have Administrator status on my normal connection.
How can I activate the Setup again?... Thank you!
Hello
If you are familiar with editing the registry, navigate to this key and change the value of the 'DisableTaskMgr ' 0
HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\Systemhttp://computerquestionhelp.com/blogs/CTRL-ALT-Delete-Task-Manager-disabled-by-admin.html
Or you can download this zipfile to your desktop. This is a corrected policy there.
Unzip, then right-click, "VArestorepolicies.inf" and select "install".http://users.Telenet.be/bluepatchy/miekiemoes/tools/VArestorepolicies.zip
As has already been suggested, it is also a Marti goo to scna the system to ensure that it is clean.
-
We are new on the forms of the ADF and we have a simple workflow with a few different human tasks.
The task of the initiator, I right click it and automatically generated a form of the ADF.
The rest of the human tasks have the same payload, and I want just the other human tasks use the same ADF form I've already created. How can I do this?
Thank you.
Yes, there is a way to reuse the shape of the ADF and its workflow for several human tasks as long as the payload is the same. To do this:
- Open the file "hwtaskflow.xml" inside your project of the ADF. It will be difficult to read when you first open it so right mouse click the xml file-> select "reformat".
- Copy the 6 lines with the
element with the form that you want to reuse-> pick up the 6 lines in the file under the rows that you copied. The and elements in the text that was copied just need to be changed from the old human task name (for example, ".../MyHumanTaskOriginal") on behalf of the human recycled news of the task (for example, ".../MyHumanTaskReused"). Don't forget to leave the text in the and items of value to their original name. - Redeploy the project.
Dan
Maybe you are looking for
-
in a text in 'pages' document - copy - paste an image in a body of text automatically seems to do with 'image remains on the page' and 'automatic', which makes the image stays in place when later editing / adding text... so the picture does not end w
-
The download of Windows XP Service Pack 3 can be accelerated?
The problem: Windows XP Service Pack 3 takes too long, more than 24 hours, to download, as long as, after several attempts to download it, I still have not discovered if or not it downloads really.The Solution:?
-
One of my computers has a virus and I'm ready to reformat the drive if I know what to do when I try to go to the command prompt, I get the cmd.exe message is corrupt.
-
Activate the addons in Internet Explorer using the registry.
I tried to activate some of the addons in Internet Explorer using registry in our area/pc environment. Click RUN, type REGEDIT, and then search for: [HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Ext\Settings] Under each SSID settings,
-
Cannot show a TabbedPane pushing the NavigationPane
I made a simple sample of TabbedPane. But it is strange that the TabbedPane screen could not shown after the NavigationPane shoot, while the TabbedPane screen showed the newspaper when onCreationCompleted successfully. Is anybody know what is wrong w