How to access my virtual machines to the internet

Similar Questions

• I can't access my Virtual Machine when the internet connection is disabled...

  Hello... I'm newbie here... I don't know if Iam asking stupid

  question or good question... Well I can't access my Virtual Machine

  When the internet connection is off... it is quite common... or

  obnormal... In my area there is a lot of electricity cuts... and

  interruptions of network of regular power 5 hours ago

  cut... and power cuts not notified... So I can't access the internet

  constantly... Is there any solution for this... Thank you

  your valuable suggestions...

  Thank you and best regards,

  Indianmale.

  Just to clarify - you are unable to connect using the default management tools to the servers in your office.

  Have you tried to remote desktop, telnet, ssh, otherwise?

  I'm kind of thinking he's trying to communicate to the world for the validity of a SSL key

• How to access Windows 8 PC on the Internet with remote desktop connection?

  Hello

  Can someone tell me how to access Windows 8 PC on the Internet with remote desktop connection?

  I'm good with the software and I have used many Microsoft software since the 1980s. So I like Microsoft products, but since they have outsourced their tech support, you can't support quality even if you pay for it. I followed all the instructions in the Windows 8 will help about DRC setting screens, but I can't connect unless I'm on the same home network. Here are the details:

  I have a desktop PC with Windows 8 Pro and I have authorized the DRC. I tried two settings in system properties:

  1. Allow connections to this computer remotely.
  2. That allow the connection of computers running Office remotely with authentication NLA.

  I also turned on both private and Public Windows Firewall settings > allow an App or feature through Windows Firewall.

  I have installation then DRC to my laptop with Windows 8 (standard edition, not the Pro version). I have a DRC using the full name of the computer and other DRC using the static IP address for my ISP Desktop connection.

  I use the user account administrator Windows for connections of DRC of the laptop.

  I cannot get this to work on the Internet from a location outside my house with another ISP connection. The only way it works if I'm uncomfortable with the laptop using the same network home.

  I called Dell tech support and it is always useless and just a more aggravating waste of an hour to talk to their support of technique outsourced in India (who barely even understand English) and then they hang up the phone as it was supposed to be disconnected. I also called Microsoft support and lost more than an hour to speak to their outsourced tech support in the Philippines (and as support of the India, they hang up or 'disconnect' when they cannot answer your question and they go account learn you more about Windows while they do). U.S. tech companies use AMERICANS more for their technical support so their customers can get people who actually care about doing a good job and can actually understand English?

  So if someone who knows using Windows 8 for DRC on the Internet has some tips, then it would be greatly appreciated.

  Thank you!!

  P.S. If anyone is offended by my comments about the ugly, incompetent, stupid providing "technical support" in India or the Philippines - Nevermind! You go ahead and waste hours of your time talking to some Morón in these countries, who barely understands English and then 'disconnects' the call when they know that you realize that they are clueless and have all the answers.

  Take a look at no - IP.com or dyndns.com, and then use your host.domain:3389 of no.-ip/dynDNS or run RelaVNc SErver that is running on port 5900 by default.  Server options allow you to change the port as well if necessary.

• How to move a virtual machine in the warehouses of data on ESXi 4.1.0

  All,

  I need to move a virtual machine from a data store to another on the same host.  I have two drive bays where each array disk is its data store on.  However, one of them has problems if I want to move two of the virtual machine to a data to another store.

  Is it possible through vsphere and if so, how?

  My host is a:

  Dell PowerEdge 2950

  vSphere Client Version 4.1.0

  VMware ESXi 4.1.0

  Hello

  1. turn off the virtual machine to be moved

  2. right click on the virtual machine, and then select Remove in the inventory (the fleeting VM on the data store)

  3. browse the data store, in the left pane, right-click on the folder of the virtual machine and select move to...

  4 browse the new data store, open the VM folder

  5. save the .vmx file

  6. start the virtual machine in the new location and make sure that it works.

• Hang a new virtual machine to the Internet

  All virtual machines that I downloaded connect to internet automatically when I their fire upwards. I downloaded a new machine virtual de VulnHub, specifically BrainPan2. It does not connect to the internet automatically even if it is supposed to. It's a vulnerable VM installation for security penetration testing. Now, I start my VM Kali, do a scan of the network and see all my computers. I'll start a VM unrelated, rerun the scan and check the other appears. Now I launch BrainPan, run the scan and nothing. I don't see on the scan.

  I read several guides associated with the virtual BrainPan2 of the internet machine, and everyone seems to be able to plug in and go. On the site of the BrainPan: 'import brainpan2.ova into your privileged hypervisor and configure the settings of the network to your needs. It will get an IP via DHCP, but it is recommended that run you to the breast of a NAT or visible by the host only operating system because it is vulnerable to attack."

  So, I put the virtual machine to run on NAT, connected by a bridge and also host. I can't detect the virtual machine by any means, it just is not auto-connect. And I can not connect and plug it as he did to hack.

  Does anyone have any suggestions?

  Hi John,.

  I'm using the regular VMware Fusion, not Fusion Pro. Fusion Pro is a virtual network editor that could help; I do not know. Just for fun, I downloaded BrainPan2 VM, and it worked only. Here are the steps I took:

  • Go to Brainpan: 2 ~ VulnHub
  • Click Download, which exposes the download link.
  • Download the file brainpan2.zip and unzip it.
  • Check the integrity of the downloaded file brainpan2.ova. In terminal, type 'openssl sha1', and then drag the file brainpan2.ova to the Terminal to fill in the full path of the brainpan2.ova file. Press return. Compare the sha1 hash in the terminal with one on the web page of the BrainPan. If they do not match, try again download.
  • Open VMware Fusion 8 and choose file-> import. Drag the file brainpan2.ova to the window. Click on the button continue and save the converted virtual machine. VMware Fusion will display a progress bar as it converts the file .ova. It took a few minutes on my Mac. Once the conversion is completed, you will see a window Finished.
  • Click Customize settings.
  • As part of the network card, select private to my Mac.
  • Start the virtual machine of BrainPan2. I don't bother to upgrade the hardware. You will see a login prompt, which I ignored. The BrainPan2 virtual machine will get an IP address from the DHCP server on VMware virtual network.

  Optional:

  • Open the BrainPan2.vmwarevm file in the Finder. Right-click to display the contents of the package. Open the vmware.log with a text editor like BBEdit or TextWrangler or even TextEdit. Search for "192.168" and you will find two entries to the VMware virtual networks. On my system, the private sector in my Mac network was vmnet1 to 192.168.166. * (I guess that the other network is the "share with my Mac" NAT.) He was appointed vmnet8.)
  • Close the log file.

  Instead of Kali Linux, I used one of my virtual machines in OS X, because it was very convenient. (My Kali Linux virtual machine are saved on an external drive). The virtual machine of OS X I used runs El Capitan, but any version of Mac OS X.

  • Take a snapshot of the OS X machine for two reasons: (1) to maintain its normal parameters and (2) because I don't trust the BrainPan2 virtual machine to not attack the OS X machine on the VLAN.
  • After the snapshot set network configuration of the virtual machine of the OS X private to my Mac, so that it is on the same virtual network as the virtual machine of BrainPan2.
  • Start Mac virtual machine. In the terminal, type "ifconfig en0" to see its IP address on the local network deprived of VMware. There are other ways to find the IP address, of course. My virtual machine to OS X has been awarded 192.168.166.129, so I figured though the virtual machine of BrainPan2 has been assigned to 192.168.166.128, which proved to be just.
  • If it is not already installed, download nmap or Zenmap or tools of everything that you need. A Kali Linux preinstalled.
  • Run a scan of the LAN ping. Example: ' nmap - sn 192.168.166. * "you should see the virtual switch to 192.168.x.1, your virtual Kali Linux or OS X machine and the virtual machine of BrainPan2 (mine was 192.168.166.128 as I suspected). The virtual machine BrainPan2 responds to the pings.
  • At this point, I ran a scan of port of the virtual machine of BrainPan2. Not wishing to spoil your fun, I will only say that I found the open ports on the BrainPan2 virtual machine.

  Don't forget to restore your virtual machine OS X (or Kali Linux) to the previous snapshot once you are done with BrainPan2, if nothing else, but to restore access to the Internet by moving out of virtual private LAN.

  I hope this helps. Please let us know if you are able to make it work. I hate to write solutions and then never discover what happens then.

• How users share a virtual machine with the level of access under total control?

  Hello

  In our Lab Manager environment, we have created workspaces and users can create and share virtual machines in these workspaces. The problem is the level of access only I can see when users share virtual machines is read-only. How can users share their machines with other users with the full control access level?

  Thank you.

  It is a constraint of security designed to prevent the full control permission, being too easy accidentally to give everyone in a system.

  The answer depends on whether you have PF3 or LM4.

  Behavior of PF3: share to everyone in an org is read-only, while sharing a physical person should give you full read/write/control

  LM4 behavior: share in all the world in an org, individuals selected in an org or anyone in a different workspace == read-only, while in the same workspace gives you the opportunity.

  That said, total control: the ability to deploy/undeploy it or change the settings of the virtual machine, NOT if the specified user has write access the console.  The distinction is quite important.

  Also, page followed, but he had the wrong information, there may be an arbitrary number of connections of the competing console to the same VM (oh, I'm sure that there is a limit, but I did not deliberately try to find).  It does give the impression that several people are faced with the same mouse and keyboard...

• How to open a virtual machine in the browser?

  Hello

  IAM using vmware ws 6.5 I have a some vm on it, I want to know how to open them in the browser like mozilla and work as we do on the virtual machines I want on my local

  private subnet

  Thank you

  The answer is the same.  VMware server can be managed via a web browser, but virtual machine does not work inside of a browser, they can only be managed and controlled through a browser.

  -KjB

  VMware vExpert

• How to migrate a virtual machine from the server with DAS to another server

  Hi guys,.

  questions. 'More' essential Kit. VMotion is available

  I have 2 physical servers, two of them have DAS (not SAN Central). SO I want to migrate a virtual machine on server A to server B. is it possible in this situation?

  Or should I have versions of more expensive VMWare do?

  Thank you
  Dmitry

  You can use clone. I would close first to the bottom of the virtual machine, but a VM slowed would be very nice clone. You can also use the VMware conveter. VMware converter can make a hot clone, including synchronization of last-minute changes, stop the source machine and put under tension the clone.

• How to clone a virtual machine with the drive?

  Hello

  Previously, I used VMware Workstation and has a mastery of "clone". Now I use the reader and I would like to clone my current VM and there is no special orders. Simply copy the directory would probably not there a lot of information such as DNS name, etc. that are likely to be changed. Is it possible to clone a virtual machine with player or do I Workstation?

  Many thanks in advance,

  Nicolas

  In my computer a full clone is nothing more then is not a copy that was made unique in the process and the players of VMware capacity but there is nothing stopping you from manually making a copy and then manually by making the changes to make it unique.

• How to make a virtual machine using the full screen?

  I have a 19 '' screen.  In the web page of vm manager when I click on 'console' to get a separate window and maximize that I get a full screen, but the virtual machine does not fill my monitor as the native operating system.

  I am losing valuable real estate.

  Is there a way to fill the screen as the native operating system?  I tried to play with just about anything.  The virtual machine is in a small box, is full from top to bottom but a few inches on each side is black.

  If anyone knows it would be very useful.

  Guest operating system do you use? As said more top vmware tools must be installed for the proper functioning of MKS. Done also by pressing CTRLALTENTER your virtual machine puts your virtual machine mode full screen to use all your "real estate"?

• How to connect my virtual domain to the Internet through my host?

  Hello

  I set up a domain with a network bridge windows environment. My problem: I can not connect to the internet. This is my setup:

  Env of the HOST:

  IP: 192.168.178.x (DHCP)

  Gateway = 192.168.178.1

  DNS = 192.168.178.1 Server

  VM (Briged):

  IP address: 10.0.0.1 - 10.0.x.x

  Subnet: 255.255.0.0

  Gateway: 192.168.178.1

  DNS: 10.0.0.1

  The DNS server for the virtual network must be set to 10.0.0.1 cause I have a windows with the running dns server domain controller and clients that connect to it.

  When I change the dns on the VM to 192.168.178.1 server while everything works. But when I change it back to 10.0.0.1, and then it doenst work.

  How I do that my virtual network can connect to the internet? Whats wrong here?

  I'm not a networking expert, I am a developer

  concerning

  Yavuz

  Assuming you're running Windows 2008 R2, open your server DNS 'properties' and add your router address physical 192.168.178.1 (which I assume is a DNS redirector too) to the "Forwarders" tab Also, check the box for indications of root on this tab.

  André

• networking of virtual machine of the internet does not work

  Hi, I am a beginner in Linux, my friend recommend install me VMware 6.0.3 for practice station. I choose the NAT configuration for my virtual machine, because I have a wireless card on my host (winxp-3 Pack), the period of investigation (get automatically from DHCP server) is 192.168.1.1 and 192.168.1.2 is my router to external internet gateway; I set virtual machine sitting in 192.168.88.0 segment. I tried to ping 192.168.1.2 - my physical network adapter, there is no road, looks like icmp knows only 192.168.88.2 (the VMware network adapter is 192.168.88.1), the gateway to the virtual network, but he does not know where to send the packets next hop.

  I put something else to let work?    The snapshot of the configuration is in the attachment.

  Thanks much for any help!

  No, it's quite normal. The gateway by default and DNS for the guest is the IP address of the host VMnet8 + 1 card.

  You can check this by opening the editor of virtual network within VMware Workstation, go to the NAT "tab" and look at the IP address of the gateway. You can also click "Edit", where you can configure (if necessary) DNS servers. But under normal circumstances, the default gateway setting here covers the host DNS queries. They will be transmitted to the DNS server that is configured on the host computer.

  Generally a server should not have multiple default gateways. For the host, it is the default gateway configured on the physical map (otherwise communication would be locked to himself). This is why the army should not have a default gateway on VMnet1 and VMnet8.

  NAT (VMnet8) allows you to communicate with the outside, the guest need default gateway to know where to send the packages which are not intended for the LAN VMnet8 (DNS queries for example). He uses this special IP

  AWo

  VCP / vEXPERT 2009

• How to identify a virtual machine in the performance table

  Hi, in the chart of performance of a Center Virtual, I see a 100% CPU usage, but I'm not able to identify which machine is causing the problem because I can not find the name of the machine. Can someone help me? Find the file attachment.

  Thank you

  Read VMware KB 1012871, ftPerl consumes 100% CPU after activating the VMware High Availability

  AWo

  VCP 3 & 4

  Author @ vmwire.net

  \[:o]===\[o:]

  = You want to have this ad as a ringtone on your mobile phone? =

  = Send 'Assignment' to 911 for only $999999,99! =

• How can access us the Client on a virtual machine on the host ESXi VI?

  Good afternoon, we are evaluating a virtualization solution, our company is small and we want only 3 servers to virtualize, and we want to use one of the virtual machines on the ESXi host, using the Client of VI, so we can use the keyboard and the screen of this server to access virtual machines. Our idea is to use this virtual machine as a workstation.

  Is this possible? or we use VMware server?

  Kind regards

  Cristian Fernández

  It is really not possible. Since the physical ESXi console, you will see only the menus and COS screens.

  Marcelo Soares

  VMWare Certified Professional 310/410

  Master virtualization technology

  Globant Argentina

  Review the allocation of points for "useful" or "right" answers.

• How to get the host name of the physical computer inside a virtual machine until the user logs in Windows?

  I don't know if this is the right place to post this question, I develop software to support VMWare PCoIP and need to know how to get the host name of the physical machine (which manages the virtual machine and View Client) within a virtual machine before the user logs in Windows of the virtual machine.

  I understand there are two ways to read the host name, via the HKEY_CURRENT_USER\Volatile Environment registry and environment variables, but they are available once the user is connected. I need info before the user connects.

  Is there a VMware API that can be called or asked the host name?

  Thank you.

  Not on the broker, but there are the startup scripts to log on to the computer virtual itself: http://pubs.vmware.com/view-52/topic/com.vmware.view.integration.doc/view_integration_startsession_script.9.2.html

  Note that these executed when a virtual desktop computer allocated connection, not to the point that the client connects - it is possible for the customer to not complete the connection (crash, cancel, network failure) and so any what solution you design must handle this.

  Mike