How to access the management of VLANs with a different virtual LAN (Dell powerconnect 6224)

Similar Questions

• Want to 700-230: how to access the BIOS on machine with wireless keyboard and no keyboard on the PC port

  Hi all

  I have a HP Envy 700-230 which has a wireless keyboard

  How am I supposed to access the BIOS that the keyboard drivers are not loaded until after the machine and there is no normal keyboard connects on this PC for a wired keyboard

  With this kind of computor how am supposed to access the BIOS

  Obviously to start the reports a keyboard error and suggest I press ESC to access the BIOS that I can't because at startup, there is no current keyboard.

  Thanks for any help on this.

  Jeanette

  While not a definitive answer, but try a wired USB keyboard instead wireless.  There may be a setting in the BIOS to change the way the keyboard interacts at the start but, of course, you need to enter the BIOS.  Looking at the other comments on this issue, if you happen to have a keyboard PS/2 and a PS/2 to USB adapter, then this seems to be a better choice.  Plug the PS/2 on the PS/2 keyboard to USB adapter and then try that at startup to access the BIOS.  Then, find the setting to allow the keyboard to be recognized at startup.  Another solution is to move the USB port, the wireless keyboard use.  If the rear ports, move forward, if forward move backward.

  Let me know if one of these help.

• LaserJet p1102w: how to access the interface web printer with new router

  I just bought a new wireless router, hoping that I'll be able to more easily print with my p1102w.

  Internet access works ok desktop and laptop (wireless).

  However, I had bookmarked the IP address of my printer, and before, I've always been able to access it by clicking on the bookmark. I checked the range of IP addresses for the router, and the IP of the printer is outside this range, so I don't know why I am no longer able to access to this. I can't access the web interface, whether they come from my laptop or desktop (wired). However, the printer is capable of printing from the desktop without problem.

  How do I enter this? I would like to restart the configuration wireless configuration, but I thought I needed the web interface for this.

  I should just insert the CD? I made a tweak or two and would prefer to keep all the settings of the printer even if I can, but I can start all over again if I have to.

  
  HP LaserJet p1102w

  I just deleted the printer on my laptop computer, reset the settings of the printer default and then run Setup from the wired desktop wireless utility wireless. Seems to have worked, I can now access the web interface via my laptop now.

• PowerConnect 2724 - how to access the managed mode

  I have a Dell Power Connect 2724 performer in our network. Since that it has been installed, it has failed but I would now add the ability to manage and configure remotely... especially so that I can activate a GigE at our NAS bundle

  When I look at the switch I see MANAGED light is on but in this case how would I connect to manage it?

  I see references to a default address 192.168.2.1 but that IP does not exist in our network domestic

  All addresses of our home network are the DHCP pool given by our router from Virgin Media and are in the range of 192.168.0/24 so what should I do to access the port of the DELL printer management please?

  When you have had access for the first time were all changed settings? You can try to disable any browser addons, cookies, clear cache, etc. Then try again.

• How to access the managed bean taskflow action result?

  Hi all
  I have a requirement where I have two areas of text (username and password) and a SignIn button. When the user clicks login, my action managed bean will run the view object and get the password for this user name. And that's why it will compare the password presented by the user and the password came from the view object. I a taskflow, in which I have two points of view, we're signIn page and other is the home page, and the result of the action is successful.
  The managed bean method here signIn Page for SignIn button.
  
  public String execute() {}
  String EnteredPassword = PassEncrypt();
  ApplicationModule am = ADFUtils.getApplicationModuleForDataControl ("AppModuleDataControl");
  ViewObject myView1 = am.findViewObject("LogindetailsView1");
  System.out.println ("Usrname is" + this.) (Username);
  myView1.setNamedWhereClauseParam ("v_Username", this.) (Username);
  myView1.executeQuery ();
  DCBindingContainer links =
  (DCBindingContainer) BindingContext.getCurrent () .getCurrentBindingsEntry ();
  DCIteratorBinding empIter = bindings.findIteratorBinding("LogindetailsView1Iterator");
  String DBPassword = empIter.getCurrentRow ().getAttribute("Password").toString ();
  
  System.out.println ("password is" + DBPassword);
  
  {if (EnteredPassword.Equals (dbpassword))}
  
  Here, I need to call the result of success, which will allow the user to get access to the display of the home page in taskflow.
  
  }
  else {}
  FacesMessage fm =
  new FacesMessage (FacesMessage.SEVERITY_ERROR, "Please check your name of user and password",
  "Please check your name of user and password");
  FacesContext.getCurrentInstance () .addMessage (null, fm);
  }
  Returns a null value.
  }
  
  If this can be done using the method call in taskflow then how could use it in my script?
  Please suggest.
  Thank you.

  you have a rule of navigation between these two pages
  If so, simply return the navigation rule name

  if(EnteredPassword.equals(DBPassword)) {
  return "success";
  }
  

• How to get the Manager to update with VMware vCenter Server 5.0 device

  Hello

  We have VMware vSphere Essentials 5 and already, I downloaded the vCenter device but how get the Update Manager?

  Thank you.

  Hello

  If you want to use the Update Manager you will have to be installed on a separate windows server, the device has UM built as of yet.

• How to access the BIOS on a Pavilion Elite e9237c with mouse and keyboard wireless?

  I have a desktop computer Pavilion Elite e9237 with a wireless keyboard and mouse. I tried to access the BIOS by pressing F10 at startup with no luck, and I can't access any of the other menus for the start-up eiither. I don't have a PS/2 port on my computer, so I can't get a wired keyboard and mouse. Does anyone know how to access the BIOS with this configuration?

  I bought a USB keyboard and he answered in the same way... No bios access. I then studied why it did not work and discovered that it was the way in which he has been connected to the computer. I had initially plugged into a USB hub when he was not working and I moved it directly into a USB port and it works! I plugged my keyboard wireless directly into the USB port and it works too! Thanks for your help... I wouldn't have thought of it if it wasn't for to recommend you the USB keyboard.

• How to access the tab 'Save all' when I close several jpeg files that have been adjusted with the "color adjust tool? He is currently making me close and save one at a time. Thanks for any help :)

  How to access the tab 'Save all' when I close several jpeg files that have been adjusted with the "color adjust tool? He is currently making me close and save one at a time.  I've just upgraded to El Capitan.  Thanks for any help :)

  I assume that you use the application overview.

  I can't find an answer to back up everything, but a workaround could be while the file menu options are visible, press the option key

  and the point of the window will become close, if you click on that dialogue will ask you if you want to restore the changes or save

  pressing Save will close the image with the changes and then move to the next image and so on.

• How to access the CLI Mode in cisco sf 302 - 08 p 8-port 10/100 Managed switch

  Hello

  Can someone help me on how to access the CLI mode in cisco sf 302 - 08 p 8-port 10/100 Managed switch. I treid the each method they mentioned in the administration guide. I am not able to enter the command debug mode and comand menu after resetting the default password. Once connected, sound directly to guide me to switch main menu.

  Hello FAL, Mark,.

  Thank you for your participation in the community of support to small businesses. My name is Nico Muselle of Cisco Sofia HWC.

  To access the CLI, you must make sure that the version of the firmware on your switch is at least 1.1.0.73 or preferably higher. Then activate telnet or ssh on the switch and opening of these sessions or a console session you will see that you are in CLI mode. You can return to the console to function menu using the menucommand.

  I hope that answers your questions!

  Best regards

  Best regards

  Nico glacier

  Senior Network Engineer - CCNA - CCNA security

• Hi how to access the tutorial - with the Eagle?

  HI - how to access the tutorial - with the Eagle?

  It's here: create a video | Adobe first Pro CC tutorials

  There is also a newer version here: How to edit videos with Premiere Pro | Adobe first Pro CC tutorials

• How can I access the tutorials that come with Photoshop on a Mac?  I have the "Editor", if that's what it's called, in front of me.  I consulted the tutorials on a Windows computer, but the arrangement on a Mac is very different?

  How can I access the tutorials that come with Photoshop on a Mac?  I have the "Editor", if that's what it's called, in front of me.  I consulted the tutorials on a Windows computer, but the arrangement on a Mac is very different?

  Hi jrjw48109603,

  • I'm really sorry but I still don't know what tutorials you talk.
  • Maybe this can work for you - https://helpx.adobe.com/photoshop/tutorials.html
  • And if you talk about the Welcome screen, please follow the instructions here -Troubleshooting the Welcome screen

  Concerning

  Rohit

• How to access the features of the APP from SessionBroker/UnitOfWork application?

  How to access the features of the APP from SessionBroker/UnitOfWork application (legacy TopLink APIs)?
  
  For example, how can I get similar APIs like em.createNativeQuery (managed object query return native) when you use the UnitOfWork API?
  
  Not JPA-coded on top of UnitOfWork or UnitOfWork on top of JPA?
  
  SessionBroker can an EntityManager is running?
  
  How can I execute JPQL via UnitOfWork?

  The answer would be no. We put only support flush multiples for the use of the APP.

  A more detailed inside the code look will show that we have actually created a RepeatabaleWriteUnitOfWork that offers extended support to match the requirements of the Joint Parliamentary Assembly. I have not tried using this subclass directly with our API native and the SessionBroker. I will review the developers to see what we believe, this is the best way forward for SessionBroker users looking to use JPA and our extended features associated with JPA.

  Doug

• Re: Satellite Pro L450D - 12 X - how to access the recovery partition?

  Hello

  I've formatted Windows 7 with a Windows XP CD but did not setup. I wanted to know how to access the recovery partition to set it by default, everything exists on the laptop right now is Ubuntu, but I don't know, I saw an additional partition that must contain recovery files as laptop did not come with a recovery disk and unfortunately did not create a filter.

  How can I access the recovery partition on the laptop having in mind, I formatted the drive Windows 7 was installed on or should I activate or something like that?

  Any help much appreciated

  Hey,.

  On the second partition of your laptop (data partition), you will find a folder named HDDrecovery and it contains recovery files. The problem is that you can use the HARD drive only with the pre-installed operating system recovery feature. It would mean in your case it s too late now and it s not in use anymore.

  You have created the Toshiba recovery disc as mentioned in the user manual? If Yes, you can use this disk to restore to factory settings. Just boot from this CD and follow the instructions on the screen.

  If you don t have the recovery disc, you can order it here:
  https://backupmedia.Toshiba.EU/landing.aspx

• HP pavilion h8-1230: how to access the bios pls help

  How to access the bios and I got windows 7 but to give birth to windos 10 with the thing free upgrade I got Pls Help

  Immediately after pressing the power button to turn on to start by pressing the F10 key.

• HP Jet 8 5801 how to access the webcam

  I just bought HP 8 5801 stream, product number K5L4OUA. The card that I printed shows it has a front and a rear facing camera, but I can't find how to access the rear side.  The camera screen does not show how.

  Also, how can I return the default tablet.

  Hello mlmarsh2,

  To access the front camera, will be the camera is on and showing the live mode view, wide upward from the bottom and you will see a taskbar with the option 'change Camera.

  I see another post, that you have created that you had difficulty with some applications uninstall.

  To restore Windows to factory, off the shelf.

  Hold down the power button and the Volume button simultaneously for a few seconds.

  A screen lights up showing some options.

  Choose F11 for the system recovery option and follow the prompts.

  Hope that helps.

  PS: If this is the first time you used a Tablet, you may prefer the traditional workstations such as Windows 7 has. You can install Classic Shell Setup on the tablet of flows for the old office and it will work as well as it does on a tower or laptop.