How to acquire data from both channels on a PCI-5922 (OR scope)?
I'm fairly new to LabView (version 8.5.1) and I'm working on my first vi non-teaching. I need to acquire analog of the two channels of a PCI-5922 data. I made a single channel using NEITHER brought Express, but you can use NOR carried Express to both channels. I tried two instances and that left me with a free entries or exits, I also tried to allow the two entries, but I get only one exit. I think that I don't have my head in the right place with this. Sorry if this is very basic.
Thank you... Steve
Take one of the LabVIEW base tutorials.
Simply use the Signal from Split. Of course, it's always this evil dynamic data.
Tags: NI Software
Similar Questions
-
How to acquire data from the memory of the meter
I am a beginner of Labview. I don't know how to acquire data from the memory of the meter.
I read a few examples of data acquisition, but apparently not similar to my case. I can't use DAQ in my computer, because I don't have DAQ card.
Could someone give me some pointers? Similar examples would be great.
-
Hello
I use LabVIEW and NI PXI-4071 PXI NOR 6070E to measure the current through a variable resistance. Now, I use a single channel of SCB - 68, but I want to add another channel at the same time so that I can have two resistors instead of one that I cam measure current through them.
I have attached a Pdf file showing installation of equipment to use and code LabVIEW also.
Can someone look at these files and give me some guidelines or ideas that can help me solve this problem, please.
Thanks in advance.
Best regards
Shaheen.
Your 4071 can do a measure at a time. Your data acquisition cannot measure resistance is not she of the analog inputs.
However, you could use a multiplexer and multiplexer your 4071 DMM. This habit give you simultaneous action, but can acquire data one after the other, the speed depends on the multiplexer, you choose!
I hope this helps.
-
acquire data from the oscilloscope DPO2024
I am trying to acquire data from the oscilloscope DPO2024 using labview. I am able to do, but my vi file only works for channel 1. Other than channel 1, it does not work and instead, it changes the adjustment of the oscilloscope as well. Find the vi files attached.
Any help is very appreciated.
You must connect the channel in the waveform of reading. It is default to channel 1 if thread continues.
-
How to erase data from the iphone if I lost and iphone is offline
How to erase data from the iphone if I lost and iphone is offline
< post branched out by host >
Hello
What to do if your iOS device is turned off or offline?
If your missing device is turned off or offline, you can still implement this Mode lost, lockor remote wipe. The next time your device is online, these measures will take effect. If you remove the device from your account while it is offline, pending actions for the device will be cancelled.
If your iPhone, iPad or iPod touch is lost or stolen - Apple supports
-
How to delete data from the iPhone 5 c?
How to remove data from my iPhone 5 c?
What do you mean by data? Applications, photos, music?? It depends on what you're trying to delete.
-
How to transfer data from a mac mini in 2006 for a new?
How to transfer data from a mac mini in 2006 for a new?
The following can help:
Move your content to a new Mac - Apple Support
OS X: manually the Data Migration from another Mac - Apple Support
-
How to transfer data from my computer to a new phone
How to transfer data from my computer/Itunes to a new device? I downloaded all my data from an Iphone 4 on my computer and I wonder how to transfer all of these data to an Iphone 5 that I own. I need to my emails and text messages transfer too. Any ideas? Email that I have Setup with my phone is an email from work, so it is important that I do not lose one of them.
You must put all your media files in iTunes. Synchronize your phone using iTunes.
-
Hello world
Do you know if you can acquire data from a microcontroller that runs under the PLUS + 1 environment, using the NI 9201 platform? I need to build a test environment in labview, but entries must be purchased from the microcontroller MC024012 Sauer-Danfoss. The problem is that this microcontroller interface provides the programming amiente MORE + 1 Sauer-Danfoss. Can you help me?
Thank you
Elza Figueiredo
double post and bad advice
-
How to save data from the COM port to file?
Hi all
can someone tell me please how to save data from the COM port on file? I transfer 1 byte of serial port... attached is the image of the vi... very basic.
I would like to save the data in a table... I mean, 1 data--> data--> data tab 2 tab 3rd--> tab
and so on... can anyone help?
-
How to acquire of various AI channels simultaneously with a different range for each of them?
How to acquire of various AI channels simultaneously with a different range for each of them?
In LabView, I found some examples but in C it is not seem to be any.
Or you can add channels one by one with individual instructions: the follwing code compilation and runs without error on vitual DAQ hardware:
ERR = DAQmxCreateTask ("", &taskH); ")
ERR = DAQmxCreateAIVoltageChan (taskH, ' Dev1/ai0', 'AI0', DAQmx_Val_Cfg_Default,-5,0, 5.0, DAQmx_Val_Volts, "");
ERR = DAQmxCreateAIVoltageChan (taskH, ' Dev1/ai1', 'AI1', DAQmx_Val_Cfg_Default,-10,0, 10.0, DAQmx_Val_Volts, "");
DAQmxStartTask (taskH);
ERR = DAQmxReadAnalogF64 (taskH, 5, 10.0, DAQmx_Val_GroupByChannel, val, 10, & read, 0);
DAQmxClearTask (taskH);
-
How to transfer data from USB key
How to transfer data from the reader flash player (C), when you open send it to it does not have this option
Drag & drop.
-
How to erase data from 2 printers I want to throw - HP Laser Jet CP1215 &; HP Laser Jet III
How to erase data from 2 printers I want to throw - HP Laser Jet - CP1215 & HP Laser Jet III thank you
The CP1215 can be reset as described in the paper here. The Laserjet III has no memory, which would keep the work print or any other private beyond information to remove the power.
-
How to transfer data from an old laptop (broken screen) to a new laptop
How to retrieve data from an old laptop, to transfer to the new laptop. the problem is that the screen is broken on the old portable th.
From Internet Explorer
Original title: data transfer
The easiest way would be to put his HARD drive in a box that connects to the computer by USB.
This is just an example - http://www.amazon.co.uk/Hard-Drive-Caddy-Case-Enclosure/dp/B003MVW2SM
You probably have a 2.5 HDD "because I know that all laptops do. If you need to buy an enclosure for a 2.5 drive "[not a disk 3.5" that could come from a desktop computer].
Almost all cases derive the power to drive the HARD drive to the USB itself [rather than an external power]. If you see one that needs an external power supply, then you are probably looking to the wrong thing.
You need to know if the HARD drive is IDE or SATA. It depends on the age of the computer. Your computer's manual should tell you or you can whip the HARD drive just to have a look.
- Here is an illustration of an IDE - http://www.amazon.co.uk/Generic-Toshiba-Fujitsu-Samsung-Hitachi/dp/B0042WZZD4/ref=pd_sim_147_4?ie=UTF8&dpID=21bYEH0CONL&dpSrc=sims&preST=_AC_UL160_SR160%2C160_&refRID=125C3XKTAFS54XACCCZ8 - connection if you look at the diagrams that you will see that there are long rows of pine trees coming from the HARD disk - what is FDI.
- Here are illustrations of a connection SATA - http://www.amazon.co.uk/Screw-drive-Enclosure-laptop-Laptop/dp/B003RIL0EM/ref=pd_sim_147_2?ie=UTF8&dpID=419CrJiBX9L&dpSrc=sims&preST=_AC_UL160_SR160%2C160_&refRID=125C3XKTAFS54XACCCZ8 and http://www.amazon.co.uk/drive-Enclosure-laptop-Caddy-Laptop/dp/B00926NM8K/ref=pd_sim_147_9?ie=UTF8&dpID=31sO4aOkykL&dpSrc=sims&preST=_AC_UL160_SR160%2C160_&refRID=125C3XKTAFS54XACCCZ8 - the diagrams show the link inside that connects the HARD drive on [if it's a reflection of what sticks out from HARD drive]-you can see that the connection is a long slot in two sections to the HDD has a long protruding into two sections - which is SATA.
-
How to recover data from the choicefield retained
Hello
How to recover data from the choicefield retained
Thank you
SujithRavindran
getSelectedIndex method will help you.
Maybe you are looking for
-
HP 15 ac 042TU: malfunctioning suggest software
Dear Sir My Hp laptop display quality is very bad view that all bars of time show all by playing any video, although I downloaded the Hd from HP site graphics driver, my web cam is not working I installed you cam but the message all the time came you
-
has ran sfc/scannow to fix itunes does not.
I want to synci my phone with my Vista PC. I ran sfc/scannow to fix itunes does not. He ran up to 77%. Thencame upward with the message it cannot complete the requested operation. Any ideas?
-
TouchSmart 300-1125 (Jesse APP78-CF) do not start BIOS
Hello I have a HP touchsmart 300-1125 with windows 7 64 bit, version of the motherboard is APP78-CF Jesse. I can't even start the BIOS! Can someone help with this at all? Thank you very much
-
BlackBerry smartphone waiting madness if I don't get resolution.
Dear all. For do more me crazy, can anyone advise how I can contact and get the support of a person in the blackberry app world. Its seems very quick and easy to take my hard earned but very difficult to get support unless you like through loads of o
-
autostart value machines fail after having copied new machines more
esxi5 623860 'free. 'Reference Dell poweredge 1950 2 x intel 5130 12 GB of RAM 750 GB sata RAID LSIstrange situation has arisen, using this server in a home test lab and pulling other guys working with in virtual machines.When I copy on a machine of