How to activate and use the built-in webcam

Similar Questions

• Edge 40-how set up and use the built-in Wecam? It is not listed in Device Manager.

  We just bought this new advantage 40 with the built-in webcam, but it does not appear in our Device Manager, or find how to use it or put up in assistance with this.

  How can we put in place and use it?

  Thank you

  Found the problem. The software has never been installed.

  I downloaded the software from yawcam and the camera has come magically to life.

• How Windows 8 turns on the built in webcam?

  Original Titel - device

  How Windows 8 turns on the built in webcam?

  In the new screen starting tile if I click on the tile to the camera, suddenly there someone on my screen that looks great to me.

• How to activate Bluetooth using the switch wireless on dell inspiron 3542

  When I try to install dell WLAN and Bluetooth driver, it seems "activate bluetooth using the wireless switch". My laptop 'Dell inspiron 3542 run ms windows 8.1. Please help me!

  How to activate bluetooth dell 3542

• How to activate Bluetooth using the switch wireless on dell latitude e6420 (early 2011)

  When I try to install dell WLAN and Bluetooth driver, it seems "activate bluetooth using the wireless switch". My laptop "Dell Latitude e6420 run ms windows 8.1". Please help me!

  Your variant of the system doesn't have the Dell Wireless 380 card and that's why it will fail to install.

  Install.

  A21 OF THE BIOS:

  http://downloads.Dell.com/FOLDER01853317M/1/E6420A21.exe

  See notes about the update of the BIOS http://dellwindowsreinstallationguide.com/updating-the-bios/

  Free fall sensor:

  http://ftp.Dell.com/FOLDER01679418M/5/St-MICRO_FFS-LNG3DM_A06_V6681_setup_ZPE.exe

  Intel Chipset Device Software:

  https://Downloadcenter.Intel.com/SearchResult.aspx?lang=eng&keyword=Intel%20chipset%20Software%20Installation%20Utility

  Intel Management Engine Interface driver:

  http://downloads.Dell.com/FOLDER01232584M/2/SWB_DRVR_ME7P1_5M_7_1_70_1205_MR_A05_SETUP_ZPE.exe

  O2 card reader Micro:

  http://ftp.Dell.com/FOLDER01481873M/1/Chipset_Driver_CY8D1_WN_3.0.08.18_A01.exe

  Utility Intel Identity Protection:

  http://downloads.Dell.com/FOLDER00705710M/1/Chipset_Driver_NGH46_WN_1.2.27.0_A05.exe

  Intel Wireless N-6250:

  http://www.Intel.com/support/wireless/wtech/PROSet-WS/sb/CS-034041.htm

  Intel N-6250 Bluetooth:

  http://www.Intel.com/support/wireless/wtech/PROSet-WS/sb/CS-034060.htm

  Touchpad:

  http://downloads.Dell.com/FOLDER01669864M/1/Input_Driver_VW486_WN_8.1200.101.134_A07.exe

  Audio

  Integrated

  Driver Intel Ethernet:

  http://Downloadcenter.Intel.com/confirm.aspx?httpDown=http://downloadmirror.Intel.com/24198/A08/LAN_Win8.1_64_19.5.exe&lang=eng&DwnldID=24198

  Intel Video:

  http://Downloadcenter.Intel.com/confirm.aspx?httpDown=http://downloadmirror.Intel.com/24329/A08/win64_153330.exe&lang=eng&DwnldID=24329

  Video NVidia:

  http://www.nvidia.co.UK/download/driverResults.aspx/80210/en-UK

  Intel Device Manager Diagnostics utility:

  http://downloads.Dell.com/FOLDER01433785M/9/DIAG_Network_Intel_A09_x86-6DDVX_setup_ZPE.exe

  Application of Control Point System Manager:

  http://downloads.Dell.com/FOLDER35332M/1/APP_WIN_R312259.exe

  Let me know if all errors remain in Device Manager.

• Data Modeler: how to create and use the collection type

  Hello
  essentially of departure I don't understand how (for example) create and use the data based on the type of data varray type.
  
  Please notify.
  Thank you
  Andrew

  Hi André,.

  You can create new types of collection (varray/table) in two ways:
  (1) in the browser - find 'Types of data' > 'Types of Collection' node menu dropdown - there just 'create new collection type' it
  (2) in the types of data model diagram - you can create collection "some type structured" or collection of references to the it - use 'new Collection... '. "tool and click first on sight structured type and after the structured type that will contain the collection - new attribute is added to the latter and if there is none this type of collection already didn't set the new collection type are created and you can change it later.

  Philippe

• How to launch and use the VMware tools

  After installing 2008r2 as a virtual machine and install VMware Tools, I am unable to open the tools and use them.  I did two days of searching, and I can't find an answer to my problem.    Downstairs is an action I took, but I would appreciate any help from the community.

  Purpose:

  Laboratory at home training and certification.

  Hardware environment: (based on "Chris Wahl" home Build Lab)

  SuperMicro Motherboard MBD-X10SLH-F-O

  Intel Xeon E3-1230 v3 3.30 GHz processor with 32 GB of ram

  Software environment:

  64-bit version of Windows 7 Professional, host operating system

  VMware Workstation 10 with all updates installed with administrator privileges

  VM #2: vSphere 5.1 install

  VM #1: The Windows 2008R2 VM I have a problem with VMware tools.

  I've deleted and rebuilt the two VM three times now, thinking it was my environment somehow.  ESXi 5.1 works although I have not built anything there yet.  I am able to access this part of the laboratory fine of vSphere Client.

  VMware Tools:

  Within the Services of VM 2008 I can see VMware Tools started service, the icon in the system tray notification area and see the files on the C: drive of the virtual computer, but there is no way to open it.

  I followed several links to create a virtual laboratory, but should not be this hard to run a program.  It's my first time that you try to use VMware tools, but I'm following the steps in the lab below install procedures.

  In the middle of the page of "Blog Editor" part 4 "build the ultimate vSphere Lab is where it installs the VMware tool and lowest after restarting Windows Update service I'm stuck to the next step."

  "Open VMware Tools, go to the Shrink ."  Click on the button of the prepare to shrink . »

  ?  How to "open the VMware Tools?

  Now on the path I have searched for and deleted and reinstalled the tools, but always without success.

  Here is a link where I found the following measures to be taken, but it doesn't work either.  The "NOTE" at the bottom, it's something I noticed and made sure was right when I installed the last time tools.

  I even found a link to where you can download the tools separately from the ISO files, and yet, it does not work.  A LITTLE HELP PLEASE!

  http://www.vdsyn.com/Windows-2008-R2-virtual-machine-VMware-tools-shows-not-running-current-after-vmotionsnapshot-operations-randomly/

  So next step that we did was
  1 uninstalled VMware Tools in the virtual machine
  2 restarted the VM
  3. manually deleted/renamed the C:\Program VMware Tools
  4. manually deleted/renamed C:\Programdata\VMware\VMware tools
  5 Rebooted
  6. install the VMware tools
  7 Rebooted

  The issue is not reproducible after the same

  
  NOTE: Make sure that the virtual computer CD player points to the correct image.  I found it always go back to the windows 7 iso image on my C: drive from physical machines to where the image 2008r2 was on drive E:

  No need to reinstall again. You're not missing something. VMware has changed the VMware Tools tray and removed options that were available in previous versions. Take a look at for example experience front of VMware: The VMware Tools GUI is gone - now what? with some information about this change and the replacement of the command line.

  André

• How to find and use the "disposable" email addresses

  Sometimes, I get a notice at the bottom of the screen that I can use disposable or disposable email addresses if I don't want to use my regular. I don't know how to do this in the help sections.

  You may specify where you see these messages? Firefox and Mozilla don't provide no e-mail services, but you can use something like gmail, simply create an email address at which you care and use that as a "disposable" email address.

• How to create and use the database in the development of a mobile Web site?

  Hello

  I am a beginner in the creation of Mobile-based Web sites. So, please can someone help me as I want to use a database for a website of the mobile base. How can I proceed further on this issue? I know what database I use and how a connection can be made to it and using what language?

  Please do not respond.

  Thank you and best regards,

  Richa Bhatia

  If you are a Microsoft Developer, you can use ADO.NET to access the database.  This is because it is the technology on the server side and is running on the web server and not to the device.

  You can create your Web site by using one of the web technologies side server such as ASP.NET, JSP, PHP etc. Any technology that will serve up to HTML will work.

  When developing web sites for mobile devices, you will quickly realize that it is not a "one size fits all".  Each set of HTML markup will probably have to be customized for each of the mobile that you are eager to target.  And then, for each version of the operating system for mobile devices there are differences in sizes of rendering, JavaScript and HTML/CSS screen capabilities.

  My best analogy is thinking differences between desktop browsers such as IE5/6/7/8, Firefox, Chrome, Opera, Safari vX.Y.  Then multiply that by about 10 fold when it comes to differences in mobile browsers.

  Have a Web site that supports all mobile devices with a set of means HTML you'll probably adopt an approach more common denominator based on lowest mobile device features, you want to support.  The alternative is create targeted for each mobile user experiences.

• How to configure and use the local storage dirve and usb

  My company bought a server DMM cisco as well as 10 players of 4310 g dmp.  I tried to work on mine here to get it all working.  Let me expose what we would do first before to get into the details.

  The cental DMM will it play any content and be used to create and manage the content here at company wehre I am.  However my boss wants to send dmp individual players (4310 g) out to our factories across the country.  He wants me to be able to creat content or allow a person managing the exact address to edit the content and then push the content from the server DMM to corporate local DPM record either on local storage or attached thumb order.  I guess my questions on what are the following.

  (1) is it necessary to push the content locally for playback?  Willingness to play the content of our dmm on the wan to do lots of traffic?  Presentations could be as simple as a welcome page based presentation playing images video and flash.

  (2) based on local content would be a wise decision I'll have to see exactly how this is done poorly.  In the settings of the dmp, I see the setting of local storage and turned it on and set to read/write.  In regard to the command of thumb gose exactly how I implement that so that DPM can see?  I plug to the back of the drive, and it seems that it is active but the management console of the player I don't see anyway to actaully see if she knows the USB.

  (3) how will push the content for local storage and control of the DMM thumb?  It looks like I can send things to the storage internal if package transfer and or advanced/DPM deployment tasks or server file.  What exactly is the difference between these two?

  (4) Lastly how I actually play the local content of the dmp?  Can I set this up on a schedule of the dmm just like I would if he played the local dmm?

  I searched through the documentation, but I have not found any good docs who are clear to actually how to do these things.  So, any help would be appreciated.

  Thanks in advance.

  gec5741

  Hi Glen,

  Here are the answers to your questions

  1) is it nessesary to push the content locally for playback?  Will  playing content from our dmm over the wan be to much traffic?   Presentations could be as simple as a basic welcome page to a  presentation playing video and flash images.

  It is not required to push the content locally, you can also play the DMM directly. The main advantage of playing on the spot, is that you can transfer the videos several hours or days before the presentation begins to be played if you deploy content off hours and then, when he's ready to start playing the new presentation.

  If you play directly the content of the DMM, the content will be transferred at the time of the DMP starts playback. This may fail if the WAN link is saturated at that time here.

  2) If pushing the content local would be a wise decision I am having  difficulty seeing exactly how this is done.  In the dmp settings I see  the local storage setting and have it turned on and set to read/write.   As far as the thumb drive gose how exactly to I set that up so the dmp  can see it?  I plug it in the back of the player and it looks like it's  active but from the management console of the player I do not see any  way to actaully see if it knows about the usb thumb drive.

  You don't need to do anything to enable USB storage, simply plug it in. To confirm that the DMP is able to see it properly, the simplest way is to connect to the DPM via FTP and confirm that he has a «usb_2» directory This "usb_2" directory, where is the USB drive is mapped.

  3) how will I push the content to the local storage and the thumb drive  from the DMM?  It looks like I can send things to the internal storage  though the advanced tasks/deployment package and or file transfer to DMP  or server.  What exactly is the differnce between these two?

  The task of "File transfer" will just do this, transfer a file to the DMP. The deployment package is smarter and will transfer all the contents of a presentation and organize them in a structure that can be used to read the content locally. You should always use the deployment package.

  4) finally how will I actually play the content from the local dmp?  Can  I set this up on a schedual from the dmm just like I would if it was  playing from the local dmm?

  Yes, she may be scheduled as any other presentation.

  I suggest you have a look at the link below. He explains the steps required to configure the deployment package and read the content deployed with it.

  http://www.Cisco.com/en/us/docs/video/digital_media_systems/5_x/5_2/DMM/user/guide/DMP/CDs.html#wp2188026

  I hope everything is clear now, but if you have any questions, let me know. I'll try to answer.

  Daniel

• How to find and use the video converter total already installed on my windows7 pc toolbar

  I tried to install total video converter that would appear as a bar above the search bar. But I was told that I have told you from. Unfortunately, I'm unable to find it, much less use it. Could you please advice me.

  OLIVIER OLIVIER

  EZEIDI ONICHA

  NWA Omar na-echi eze

  Hi Olivier,.

  How did you know that the application has been installed?

  Check if the program is installed in the Panel.

  was: Start Type programs and features in the search box and press ENTER.

  b: Now, locate the program in the list to see if it is installed or not.

  Good day!

  Please let us know about the State of the question.

• Satellite C660 - how to activate and use WAKE ON LAN?

  Hi all

  Previously, I posted asking about the use of Wake on Wireless LAN and was very helpfully informed that it was impossible, so I started to explore the Wake ON LAN option.

  I have a Toshiba C660 PSC0LE-00500JEN and helped Wake ON LAN in the BIOS and have connected a LAN cable between my router and the laptop, which recognize each other, if the cable looks ok.

  However, if I use an app to WAKE ON LAN on my android, or I use a site online "wake on lan via browser ', the laptop stay asleep.

  Can someone advise?

  Thank you

  James

  Hello

  Wake Up on Lan option would work if send you a magic packet to the remote machine (laptop).

  I have no experience using the Android app, who knows if it works properly

  Try the other method. For example, using software such as wake on Lan for Windows (GUI) graphical user Interface

  Google for it to download this software.

  In addition, go to the device-> LAN card Manager-> properties-> Advanced tab and check here if the WOL is activated too

• How to configure and use the fingerprint reader?

  I have a Pavilion dv7 - 6157cl laptop with Windows 7 Home Premium 64-bit.  A second person may also use the player?  If this is not the case, the password feature can be used by someone else?  I need a complete and detailed instruction for the fingerprint reader.  What player software that is mentioned in the PDF manual?  No software is given.  I don't know where to start.

  Thank you

  Here's a thread on this, the first part is on the installation, which you can skip, you should already have installed everything, so move on to the configuration section.

  http://h30434.www3.HP.com/T5/notebook-operating-systems-and/HP-SimplePass-identity-protection-validity-fingerprint-and/m-p/742013

• Not able to use the built-in webcam

  I have a HP Pavilion dv6t - 6 c 00. I've upgraded to windows 7 ultimate which I had windows 7 Home premium that I could use the webcam, but now it displays an error when I open cyberlink youcam "warning, no webcam detected. Try connecting a webcam on your computer now. If you are using a built-in camera, make sure it is turned on." I looked and tried all the steps except the final step that the cyberlink youcam software does not allow me to click on the configuration settings. What should I do to activate my webcam?

  According to the message that you have recently published, I want to confirm that this could be a hardware problem and I highly recommend to Contact HP immediately technical support by phone for further assistance immediately to get your Notebook diagnosed and repaired by an authorized HP Certified Engineer

  You can also check your warranty here to check the status of the guarantee

  Hope this helps, for other queries in response to the post and feel free to join us again

  * Click on the star of CONGRATULATIONS on the left to say thank you *.

  Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.

  Thank you

  K N R K

  Although I am an employee of HP, I speak for myself and not for HP

• How to configure and use the BigAnt software?

  I want to know how to use it for my home network. I like the features and how it is free for users less than 10

  Hello
  Maybe this can help.
  http://www.bigantsoft.com/IM/FAQ.html

  Manual, http://www.bigantsoft.com/download/BigAntQuickStart.pdf