How to activate the Microphone on Satellite Pro A120 entry?

Similar Questions

• How to access the BIOS on Satellite Pro A120

  Sorry for my English.
  But I need help:

  How to access the BIOS on my Satellite Pro A120

  Hello

  If I m not wrong not the Satellite ProA120 is supported by the Toshiba BIOS and so you should be able to access the BIOS pressing the * ESC * key immediately after starting the laptop

• Re: How to access the BIOS on Satellite Pro A120

  Can someone tell me how to access the BIOS on my SAT Pro A120?

  Hello

  You must press ESC and then F1 key immediately after the laptop has been powered!

  The laptop seems to be to use the Toshiba BIOS and ESC key should be the right one!

  Good bye

• Need info on the microphone on Satellite Pro A120 Jack

  Hello

  I am using Skype with my A120SE and bought a Logitech Internet Chat headset. However, the volumes of micro are acceptable with the sensitivity turned to max and thrust box checked in the audio properties of XP. But the amount of "white noise" is unbearable. The Web from Logitech website suggests that the microphone is a type of capacitor requires a voltage of 3V polarization, and this poor performance can be caused by an inadequate diet. I also noticed that headsets/microphones of some other manufacturers suggest a bias voltage 1.5V.

  I can't find any specification tecniques for the Toshiba microphone jack. Can anyone help, or can anyone suggest a reasonable headset which worked with the A120SE?

  Hello

  I quite often here and if I remember right you are the first person who wrote about the bad experience with the use of the helmet. Generally avoid any problem. Logitech stuff is good quality material and I wonder really subject described.

  I'm really skeptical that someone can give you info on the mic socket. Try contacting a service allowed in your country. Maybe they can help you. I use Sennheiser headphones and I am very satisfied. It's really high quality product and I can recommend it.

• How to activate the LCD in Satellite C850-B374 sensor after the BIOS update?

  Hi, friends

  I m currently a customer satisfied with Toshiba since April 2013. I've been using laptops since 2007 after using different brands, I found Toshiba to be good.

  I recently updated the Bios from 6.0 to 6.50 of the Toshiba service station.
  Update was successful and the computer works fine.

  But after restarting the LCD sensor that activates the power button in this model of laptop does not work. After entering the utility parameter that I came to know that CE of bios version is 6 and bios version 6.50 so how to activate the sensor lcd start automatically while I open the lcd screen

  Ashik

  > How to activate the sensor lcd start automatically while I open the lcd screen

  You want to start Notepad by opening the cover. Right?
  In this case you should enable the option in the system of Windows 8 settings

  [Why my laptop Windows 8 start automatically when you open the cover of the display? | http://APS2.Toshiba-tro.de/KB0/FAQ2C03FA0001R01.htm]

  "You need to find the option called: + open Panel - Power On" feature.
  This option must be enabled in order to automatically start the computer when the display lid is opened

• Where can I get the adapter for Satellite Pro A120

  Hello

  Anyone know where I can get a dc for a Satellite Pro A120 Jack.
  These seem to be quite rare models.

  I have spent hours searching if google and portions of websites, but just can't locate it.

  Anyone?

  Hello

  All compatible Toshiba laptop parts can be ordered from the local ASP.
  The service allowed in your country could order such a part of Toshiba if it would not be in stock.

  But as far as I know the Satellite Pro A120 needs a * PA3092U-1ACA * AC universal adapter that takes in charge 15 V, 4A, 60W.

  Try to search for this part number on the net and I m you can find deals.

  Greetings

• Installation problems after upgrade the HDD on Satellite Pro A120 (PSAC1E)

  Hello

  I've recently updated my Satellite Pro A120 with more memory and a larger hard drive. The memory I installed is 2 x 1 GB Module (DDR2-667) and the product number of the hard drive is MK2035GSS.

  My computer recognizes both of these upgradges, but since their installation I was able to install all applications (for example Norton Security etc) on my laptop - they seem to spend 1/2 to 3/4 of the way in which the installation process and then just quit smoking and become insensitive or an error message appears. I even tried to put the product recovery disc to try and erase everything and start over but even that does not load in entirely. Any ideas of what could be the cause? Also, I get messages of constant error on the screen and it blue screens and restarts frequently.

  If anyone has any ideas on what could be the cause, I would be extremely grateful for any help!

  Thank you very much

  Cblack

  Post edited by: cblack

  Hello

  just a question, than to the manufacturer that are the memory modules? And similar modules? Or do you have that you have installed other modules later.
  We can exclude the HARD drive because it doesn´t HARD drive installed. they do not cause bluescreens or similar. In very rare cases, the disk HARD COULD cause errors, but then the pladder or BSOD´s must be REALLY damaged and in your case, the HARD drive is brand new.

  It might be, that memory modules are not compatible with your machine. To avoid these incompatibility issues, you must use the modules of well-known such as kingston and toshiba brands. (I'd rather kingston, they work like a charm in my A100 Sat :))

  Would appreciate comments on your part.

  See you soon

• How to activate the BT on Satellite A350?

  How can I get the bluetooth to operate?

  The Panel has the icon, but when I try to turn it on, nothing happens.

  Satellite A350 (PSAL6A - 016 07H) with Vista

  The exact specification of your laptop is not known to me and I can't say with certainty whether or not your machine has BT module. When you use BT, you must activate the WLAN switch and use the FN + F8 key combination to activate the BT module.

  How it looks like you can see on http://aps2.toshiba-tro.de/kb0/HTD9402KQ0000R02.htm

  You can activate BT on this way?

• Re: How to disable the BIOS on Satellite Pro A300 - 1 2 pass?

  I have a Toshiba Satellite Pro A300 - 1 2, some how the BIOS got locked and a startup password has been enabled, I tried to get in the BIOS to disable the startup password but without any job.

  What I need to send or take it back to Toshiba to take them off for me?

  Thank you for your time.

  If the BIOS password does not work for you, you need professional help. Contact the nearest Toshiba service and they can remove it for you.

• How to activate the touchpad on Satellite A75

  I accidently turned off my Touch Pad on my Toshiba Satellite A75. Of course, this won't work - anyone can help me with the command to activate the touchpad.

  Thank you

  Sue

  How do disable you the touchpad?
  Have you used a combination of FN keys?

  Try to reverse this order using the FN + F9 key

• How to set the power settings - Satellite Pro A10 with Win XP Pro

  I an A10 Pro of the Satellite with Win XP Pro installed and cannot access the power settings. When I go into the power settings in Windows, I get a msg telling me to use Toshiba Power Saver and Win power settings are grayed out.
  I installed pwrsav-spa10-xp-60007-.zip which tells me that it is installing the Toshiba Power Saver, but always Win power settings are greyed out and I can't find no separate application "Toshiba Power Saver".
  The BIOS shows ' version of BIOS ACPI = 1.30.
  Can someone advice how to change the power settings please?
  Thnx.

  Dave

  Hi Dave,.

  You have the "Toshiba common Modules" installed? They must first of all for many models of Toshiba, and power settings module is an add-on for that.

  If you do not have the appropriate restoration or the utility CD handy, the drivers can be downloaded from the Web from Toshiba website.

  I hope this helps, let us know how you go

  Weezle

• How to wear the Vista/Toshiba Satellite Pro A200 software after upgrade HARD drive

  Hello.

  Have ordered a Seagate Momentus 7200.02 200 GB SATA-300 7200 RPM 16 MB 2.5 "for my Satellite Pro A200GE - 26. Toshiba slow disk with this laptop ships is simply not fast enough so it is replaced.

  My question is this: can I use the recovery disc of the DVD came with my laptop to reinstall Vista and all the Toshiba drivers on this new album?

  If this is not the case-how can I do?

  If I can do it - could you give me a checklist of things to do?
  Are several factors I need to get used to exist on the recovery disk?

  I ask this because I know how to do this on a PC with the Original OS disc, but I was horrified when my laptop has been delivered and no original OS disk - I think it's very bad for any help would be accepted with gratitude.

  Thank you in advance,

  Kenny.

  Hello

  You should not worry about the whole procedure, just install the HARD drive, put the recovery CD in your CD/DVD drive, press F12 and start with your CD drive or just press 'C' (which automatically inserted CD, boots).

  The recovery is not limited to a specific HARD disk, it automatically adjusts the size of the partition and install EVERTHING on your disk as a preinstalled OS shipped directly from the factory. Don t you need some additional drivers or software, the only thing you need to do is to copy your personal data on the system drive and customize your windows.

  It is the intention of recovery media: put it in and it does everything by itself.

  That's all. :)

  See you soon

• How to access the BIOS on Satellite Pro 4600 settings?

  Guys,

  I received a Satellite Pro 4600, unfortunately this laptop has 2 and a half proceeding on this issue. The first is MS2000, then XP then an incomplete installation of XP. When I start the laptop, it asks which OS I want to use. I have a legal copy of XP that I bought and I want to reformat the computer laptop and put on a new install of XP, the problem is how to enter the BIOS to change the settings to boot to a CD?

  Any help is greatly appreciated.

  Steve

  Hello

  First of all you n t need to access the BIOS to boot from the CD.
  You can simply press the F12 key immediately after the laptop has been powered.
  It would show the available boot options.

  Alternatively, you can press the C button that would automatically allow the CD/DVD drive as the boot source.

• How to clean the cooling on Satellite Pro 6100 module?

  Since my laptop for some reason stop (explained in my last post), I read messages from others who are similar to my problem and some of the responses that they was that they must clean the cooling with a vacuum (vacuum) module.

  So I was wondering how to clean it and where is it? (I m not an expert on computers)

  Hello
  I am not owner of a Satellite Pro 6100 but I saw this laptop on several pictures and it seems that the fans are placed at the rear near the CC.
  If you try to vacuum dust and debris from these grids of fans.

  I found also found a very detailed instruction how to remove and open the Satellite Pro 6100. http://www.irisvista.com/tech/laptops/Toshiba6100/Toshiba_Satellite_Pro6100_dismantle_1.htm

  BUT if you have no experience, you must do it yourself. The best way to ask someone who knows what to do!

• How to disable the microphone on Satellite A100?

  Hello!

  First of all, I have a somewhat stupid question: what is my Satellite A100-547 has a built-in microphone? If she has one - how can I disable it and use the external microphone of my helmet?

  If I want to talk to others in Teamspeak, the others can hear something even if the microphone of the headset is not connected.
  So I guess, there must be a microphone; Pei

  Hello

  Internal microphone of this unit is not available. You can use an external microphone only.

  End of the story.