How to activate the S-video port on a satellite M30X 154?

Similar Questions

• How to activate the resolutions of wide screen on Satellite Pro A10

  Hello

  I looked through various positions through the forums, but have not found how to activate the wide screen on a Toshiba Satellite Pro A10 resolutions.
  The 2 following wires offer partial answers:

  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=19570
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=19677

  The solution in the 2nd post won't work because the A10 has an Intel graphics card, not a Nvidia. He suggested also, modify the INF of the graphics driver, but to extract the driver (SA10B2DP.exe) file includes an installer, but no INF.

  Just look to see if anyone has any advice on how to activate the resolutions such as 1440 x 900 or 1680 x 1050.

  Thank you

  Hello

  you mean on the external screen, Don t you? If you have an intel chipset graphic why Don t you download the drivers from the website of intel.
  Maybe it offers a resolution of the external display.

  I don't know if the res external can be set to widescreen on this chipset as the drivers are somewhat limited...
  Can you describe what monitor you have and how you connect it to your machine. (d-sub or DVI)?

  Would appreciate some reactions :)

  Welcome them

• HP Pavilion a6551nl: HP Pavilion a6551nl how to activate the integrated video

  I have a HP Pavilion a6551nl and the video card is a failure. I spent with a Compaq desktop, I have, and here he also fails. Compaq video card works fine in my HP Pavilion a6551nl. I read that the HP Pavilion a6551nl has integrated video, but that it is not available when a video card is installed. Now, my video card has no I would like to know how I can activate the embedded video.

  The system must detect the absence of a video card installed and return to the integrated video.

• Satellite A105-S4384 - how to use the s-video port

  What is the way to use a s-video cord to connect my 4384 to use the TV as a display?

  I use Linux Ubuntu 8.04... Thank you

  Hello

  Usually, you don t need no work around special to make the connection with the external TV.
  You must connect the laptop with the TV using the s-video cable.

  Please note that the s-video channel must be enabled on your TV.
  Then change the video output in the properties of the graphics card.

  Using a Windows operating system, you would be able to switch to the external TV by pressing the FN + F5 keys, but as much as I know about Linux OS this function will not work.

  Welcome them

• How to activate the monitor USB ports?

  I got my monitor connected to my surface 3 pro and I tried to plug in my phone so I am connected to the USB hub on the right side of the screen of WFP 2007 and nothing happens I have to assume I have to configure something but I don't know what.

  First of all, I doubt that the USB ports monitor downstream will provide enough power to charge the phone. Give it a shot. Second, for the monitor USB ports downstream from the function, you need the USB upstream in upstream USB port monitor. The other end plugs into a USB port on the computer.

  

• How to activate the s-video output of lenovo R61i

  HII,

  I have lenovo R61i, and I plugged the S-video cable directly from my laptop to a TV

  and I put the screen at 800 x 600 resolution, but itsn can't display something.

  If you can help me I will be very happy.

  thnx in advance...

  Hello wasim.

  It s a bit tricky, but just set up a new profile for the realization of the presentation, click on TV as out put it, when you are prompted.

  Once the profile is defined, yoúll will be able to switch to this profile using FN + F7.

  Go to start, all programs, ThinkVantage, Director of presentation

• How to activate the Intel GPU of 4000 on Satellite L850-10J

  Hello

  I would like to know how to activate my graphic card intel 4000.
  On the Device Manager in the graphics card menu I can not see the 4000 graphics card intel, shows me only HD 7670 M Ati graphic card.

  I did an update of my bios version 1.60.
  What is supposed to do?

  Thank you.

  Hello

  You want to switch between the internal and dedicated GPU. Right?
  You said that you have an ATI graphics card.
  For laptops that are equipped with the graphic chipset ATI something like that is not possible because not supported

  As far as I know, you can do so with the nVidia GPU support the Optimus technology.

• How to activate the Ricoh SD/xD/MMC in Satellite A300 @ Ubuntu Intrepid Linux?

  Hello

  I have a laptop Toshiba Satellite A300 PSAGCE 1 1 M
  and I installed Ubuntu Intrepid with kernel 2.6.27.11 (I did not
  because Linux is better and faster than Vista and free... I did it
  because I'm working with simulation of calculation, and I need Linux in this
  machine).

  Unfortunately does not have a single resource: Ricoh SD/xD device.
  But he is identified by the Linux kernel and it has loaded modules to be controlled (I guess).

  That I have to do to run my xD/SD/MultiMedia Card? (I put an xD card, and there is no message in the newspaper).

  My paper, hardware and modules are:
  _ # SDHCI connect messagens: _

  Bq. + $ dmesg | grep-i sdhci + \\+sdhci: Secure Digital Host Controller Interface driver +------+ sdhci: Copyright (c) Pierre Ossman +------+ 0000:04:06.1 pci sdhci: controller SDHCI found [1180:0822 | http://forums.computers.toshiba-europe.com/forums/] (rev 22) +------+ 0000:04:06.1 sdhci-pci: PCI INT B-> GSI 17 (low)-> IRQ 17 +------+ 0000:04:06.1 pci sdhci: will use DMA mode even if HW does not fully support it. +------+ mmc0: controller PCI - 0000:04:06.1 - using DMA + SDHCI

  # Modules SDHCI _: _

  Bq. + $ lsmod | grep-i sdhci +------+ sdhci_pci 17024 0 +------+ sdhci 27396 1 sdhci_pci +------+ 67168 1 sdhci mmc_core +.

  Information of pci RICOH _ #: _______

  Bq. + $ lspci | grep-i \\+04:06.0 ricoh + FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 controller (rev 05) + \\+04:06.1 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 22) + \\+04:06.2 system peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 12) + \\+04:06.3 system peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev 12) +.

  _ # 04.06.X pci information newspaper: _

  Bq. + $ dmesg | grep-i '04:06 ' +------+ PCI: 0000:04:06.0 reg 10 32 bit mmio: [d3100000, d31007ff] +------+ pci 0000:04:06.0: supports D1 +------+ pci 0000:04:06.0: supports the D2 +------+ pci 0000:04:06.0: SME # D0 D1 D2 D3hot D3cold supported +------+ pci 0000:04:06.0: SME # disabled +------+ PCI: 0000:04:06.1 reg 10 32 bit mmio: [d3100a00, d3100aff] +------+ pci 0000:04:06.1: supports D1 +------+ pci 0000:04:06.1: supports the D2 +------+ pci 0000:04:06.1 : SME # D0 D1 D2 D3hot D3cold supported +------+ pci 0000:04:06.1: SME # disabled +------+ PCI: 0000:04:06.2 reg 10 32 bit mmio: [d3100900, d31009ff] +------+ pci 0000:04:06.2: brackets D1 +------+ pci 0000:04:06.2: supports D2 +------+ pci 0000:04:06.2: SME # supported from D0 D1 D2 D3hot D3cold +------+ pci 0000:04:06.2: SME # disabled +------+ PCI: 0000:04:06.3 reg 10 32 bit mmio: [d3100800, d31008ff] +------+ pci 0000:04:06.3: media D1 +------+ pci 0000:04:06.3: supports D2 +------+ pci 0000:04:06.3 : SME # supported from D0 D1 D2 D3hot D3cold +------+ pci 0000:04:06.3: SME # disabled +------+ ohci1394 0000:04:06.0: PCI INT B-> GSI 17 (low)-> IRQ 17 +------+ ohci1394 0000:04:06.0: 64 latency timer setting +------+ 0000:04:06.1 pci sdhci: SDHCI controller found [1180:0822] (rev 22) +------+ 0000:04:06.1 sdhci-pci: PCI INT B-> GSI 17 (low)-> IRQ 17 +------+ 0000:04:06.1 sdhci-pci: will use DMA mode even if HW does not fully support it. +------+ mmc0 : controller on PCI [0000:04:06.1] SDHCI using DMA.

  Thank you for your attention.

  Post edited by: RafaelBarreto

  Hello

  Have you tried to find the answer on some Linux forum?
  Toshiba doesn't support Linux for this model of laptop and I don't think that anyone here can help you.
  If you will find some useful info please post it here.

  Good luck!

• Terca M4: How to activate the external ports, DVI and analog?

  Please can someone please tell how to activate the two external ports. I would use two DVI and analog to the office. Currently if you activate a second screen machine sets up the flat screen and the other the DVI external display. Is this in any way about this?

  See you soon

  Hi Matthew

  As far as I know you can connect an external monitor or a TFT. For this you can use the VGA (15-pin) port or DVI - D video, supported by PortReplicator III (PA3314E).

  Sorry, but I don't understand why you need the two holes at the same time. How many external screens that you want to use? Sorry if I'm missing something but perhaps you can explain your wishes more precisely.

  Good bye

• Satellite Pro M50 with Vista: how to get the S-video on the job?

  Hi all

  I have a vista equipped Satellite Pro M50. Does anyone know how to get the S-video on the job? I can't understand.

  Inadvance, see you soon

  Phil

  Did you look in the user manual?
  This doc is always pre-installed on laptop and provides useful information. Also how to connect a TV and use simple notebooks ports.

  A hint; You must use an s-video cable to connect the laptop to the TV.
  Then use the FN + F5 key combination to switch between display devices.
  Sometimes the special s-video option must be enabled on the TV.

  I would recommend consulting the manual of the TV also.

  Good bye

• Qosmio F50-126: how to activate the integrated graphics card?

  Running Windows 7 on F50 - 126.
  After checking my specs on the site Web of toshiba, here are the details on my graphics card: -.

  Manufacturer: NVIDIA;
  type: NVIDIA; GeForce; 9700 M GTS supporting TurboCache; technology
  memory: 512 MB dedicated VRAM (up to 1 791 MB of total available graphics memory using the TurboCache™ technology with 3 GB of system memory)
  memory type: GDDR3 (800 MHz) video RAM (resp. RAM video and system memory combined)
  connected bus: PCI Express 16 x

  I want to know if I can turn on my integrated graphics card. I know that clicking on powersave suppose to turn off my 9700 m and go to the integrated card, but the laptop did not want it actually disabled.
  Like, watching a video or a game of battery the difference between "Powersafe" and "Balance" is not that much.

  The computer seems to work at full power.
  Because I remember when I had Vista installed, the game and used trolling videoes. But on windows 7 it doesn't. Anyone know how to activate the integrated card?

  I have my computer updated completely and everthing... How d I do not know if my card is turned on or off?

  Hi mate

  I'm a bit confused of m.
  Why?
  Because you ask about activation and deactivation of the graphics card (integrated).

  First of all, there is ONLY a single graphic chip!
  It s a GeForce 9700 M GTS graphics card.

  The graphics chip supports the 512 MB GDDR3 own (he dedicated video memory s) and it s is always available!

  In addition, the chip supports shared system memory. It depends on the available main memory!

  For example:
  * With the help of Win 32 bit system *.

  System memory: * 2 GB *.
  Dedicated video memory: 512 MB
  Shared system memory: 767 MB (using 3 GB of RAM you 1279 MB)
  TOTAL available graphics memory: 1279 MB (1791 using 3 GB of RAM)

  System memory: * 4 GB *.
  Dedicated video memory: 512 MB
  Shared system memory: 1279MB
  TOTAL available graphics memory: 1791 MB

  * With the help of Win 64 bit system *.

  System memory: * 2 GB *.
  Dedicated video memory: 512 MB
  Shared system memory: 767 MB
  TOTAL available graphics memory: 1279MB

  System memory: * 4 GB *.
  Dedicated video memory: 512 MB
  Shared system memory: 1791
  TOTAL available graphics memory: 2303

  As you can see the use of Win 64-bit and 4 GB of RAM would be better for the graphics card as the use of the file Win 32 bit with 4 GB of RAM

• How to activate the spell checker

  I use Mozilla Thunderbirds e-mail and would like to know how to activate the spell checker - Help

  http://email.about.com/od/mozillathunderbirdtips/Qt/et_inline_spell.htm

• How to activate the pop-up windows?

  I can't fill a demand for services with ASCAP because I've not enabled popups. So, how to activate the pop-up windows?

  You can uncheck the block pop-up windows under the Orange Firefox button > Options > Options > content tab.

  See more details here

• How to activate the BT on the Satellite C660-184?

  Toshiba produces online information continues to tell me that the Bluetooth 3.0 is available for my computer, but annoyingly not to tell me how I can get it.

  It would be useful that this information came with a link that I can use to act on the information.

  Does anyone know how bluetooth can be enabled on my computer?

  All the info and the latest BT downloads, you can find the portal of Toshiba BT - http://aps2.toshiba-tro.de/bluetooth/

  How to activate the BT?
  Activate WLAN first and when WLAN led on the key FN + F8 use combination and allow to BT

• r204tx: how to activate the deletion warning on hp computer laptop r204tx

  Hi all!

  Recently I bought hp laptop r204tx with Win. 8.1 - 64 bit, however, whenever I want to delete any file, folder, etc. I press the button Delete and deletes directly without any warning or alert!

  Please, help me to solve this problem and enable the alert message for the delete option...

  Thanks in advance!

  How to activate the Confirmation alert delete:

  http://www.askvg.com/how-to-enable-delete-confirmation-dialog-box-in-Windows-8/