How to activate the stylus and touchscreen Windows 7?
How to activate the stylus and touch in windows 7? If it displays "no net and enter key is available for this view.
Please tell me from the beginning on this topic...
If this screen does not have a sensor to detect the pens or touch, you need to go buy a new touchscreen compatible.
But if it worked before, then you probably have a driver installed. Go to the website of the company that builds your screen, and search for downloads.
Tags: Windows
Similar Questions
-
How to activate the touch screen on Windows 8.
Original title: How can I activate this touch screen of toa
How can I make my computer a touch screen
Hey Cindy.
Thanks for posting your question in the Microsoft Community forums.The description of the problem, I see you want to how to activate the touch screen on Windows 8.
I've surely you will help solve this problem. Let's try a few steps that will help you solve the problem.
If the computer has the features for touch screen computer and you want to enable you can try the procedure described in the article and check.
a. press on the key Windows + Q.b. type Control Panel.
c. go to the Sound and material.
d. click on Pen and touch.
e. click the contact tab .
f. Enabthe use your finger as an input.For more information, please see the link.
Contact: call, tap and beyond
http://Windows.Microsoft.com/en-in/Windows-8/touch-swipe-tap-beyondHope this information helps you. If you need additional help or information on Windows, I'll be happy to help you. We, at tender Microsoft to excellence. -
How to activate the copy of microsoft windows genuine
windowsproductactivationondriverc: / drivers/r17429
How to activate the copy of windows on a dell genuine microsoft mobile tag #1cdbl61
Hi adacallaway,
Refer to the Microsoft article below to find out how to activate Windows XP.
How to activate Windows XP
-
How to activate the grammar and punctuation of keyboard
My question mark is a letter in Spanish, how do I activate the punctuation and grammar on the keyboard
I looked here layouts of different Spanish (and french) keyboards (http://msdn.microsoft.com/en-us/goglobal/bb964651.aspx), but none had a letter where is the question mark.
Install the US-International keyboard. Start - Control Panel - regional and Language Options - languages - details - add. Then, check the key parameters to change keyboards or turn the language bar (advanced text Services cannot be disabled).
It works in two modes. Right Alt or Shift + right Alt + another key and also by pressing the keys dead (such as accents). On keyboards, the Right Alt key is called Alt Gr.
Right Alt is the same key as Ctrl + Left Alt on the US International keyboard, and on almost all keyboards except the standard US keyboards where the keys left and right are treated the same. There is a reason why Ctrl + Alt must not be used to define keyboard shortcuts. Also F12 should also not be used for hotkeys since it is reserved for the attachment of a debugger.
-
How to activate the account administrators on windows 7 Home premium?
Original title: community forum
How to activate the account administrators on a windows 7 home premium?
See this tutorial
http://www.SevenForums.com/tutorials/507-built-administrator-account-enable-disable.html
Furthermore, the title of your post is not very descriptive.
-
How to activate the product key for Windows 8
* Original title: product ket
I bought C440 to install the Microsoft product key request, call center does not; machine to say its with windows 8. How to get the product key
Hi Manon,.
1. What is the brand and model of the computer?
2. What is the exact error message?
If this is an OEM computer, you need to contact the manufacturer of the computer to activate Windows 8.
How to confirm that the system of Windows 8 is successfully activated
Please get back to us with the information above to help you accordingly.
-
Satellite P750-13F - how to activate the keyboard backlit on Windows 8
Hello!
Today, I installed Windows 8 premium on my P750-13F, which features a backlit keyboard. In order to upgrade to Windows 8 I had to uninstall certain Toshiba drivers and other programs.
Now, I have fully functional Windows 8, but I don't know how to access the functions of FN key (screen brightness, wifi power button, volume up/down).
Now that the FN key is innoperative function that I miss the most is that for illumination of the keyboard, because I can still do everything else by other methods (I mean volume up/down, brightness etc) but I don't know how to illuminate the keyboard now.
I tried to install the Toshiba hardware configuration utility, but it will not install with Windows 8. I like so much if the FN key remains innoperative (although that would be nice if it would not) but what I really want to be able to change the lighting of the keypad.
I'll be very grateful for any ideas.
Up to Toshiba doesn t offer Win8 tools and utility there is nothing you can do about it. I hope that will happen very soon.
So please be patient until the stuff of Win8 will be offered for download. -
How to activate the password is shared Windows XP
Hello
Can someone tell me how to turn on password protected sharing on Windows XP. I created a network between my 2 computers using Windows XP, they work fine, I want my computer to request the user name and password every time someone tries to access from the network.
I searched for the answer for hours, but there is no answer.Please do not give me this link
http://support.Microsoft.com/kb/307874
because it has not helped at all, this is not what I wanted to do.Thank you
Microsoft does not support to protect files or folders with a password. Instead, access to the files is regulated by authenticate as a user when you connect, and once authenticated, you will have access to all the files and folders to which the user or group has permissions.
So even that work, "Simple file sharing" must be disabled. This means that you can do this with XP Home (like service machine). Simple file sharing requires all external connections to authenticate the 'Guest' user no matter what--no real authentication is therefore possible.
Assuming you have XP Pro and disable Simple file sharing, then the network authentication works something like this:
If the same user name and password of a user exists on the service machines and the Client, the authentication is automatic (it won't request user name and password - you will be simply authenticated)
Otherwise, if the same user name exists on both machines but the passwords are different, the connection is automatically rejected
Otherwise, if the guest user is enabled on the service computer, then the user is automatically authenticated as a "Guest"
Otherwise, if the guest user is not enabled on the service computer, then it will ask you a user name and password (which I think is what you want).In summary, if you still want to request a username and password when someone connects, then you must disable Simple file on your server XP Pro machine sharing, not have the same usernames on both machines and disable the account invited on the service machine (note that "turn off" the account invited in the user Panel do not "neutralizes" it). To disable the guest account, open a command prompt window (start-> Run-> "cmd") and then, in the command window, enter the command:
NET user guest / active: No.
Note that this didn't matter that will prevent to authenticate as the user invited on this machine.
Even if turn away you from KB307874, is actually the closest you can come with Windows.Hope this Helps,
JW -
How to activate the screen saver in windows 7?
Hello!
Impossible to activate screen saver like menu drop-down is dimmed.
Need help! This is a very serious problem. Imagine that you watch videos from your laptop connected to HD TV via the Port of the display, the screen is HD and suddenly screen goes black because the screensaver is already activated. Then, you must get up and touch something to recover the picture on your screen. And must repeat the operation every 20 minutes!
I have Canon set up or do anything with the settings on the screen saver as menu drop-down is dimmed.
Hi Deyett,
In Windows 7, the local Group Policy Editor will be available in the professional, Ultimate and Enterprise editions.
If you have any edition of Windows above, then you can try to open the Group Policy Editor as follows:
a. click the Start button, type gpedit.msc in the Search box and press ENTER .
Then you can follow these steps:
(b) in the left pane, click to expand User Configuration, model of administration, Control Panel, and customization.
c. in the pane, click with the right button to Activate the screen saver and click Edit.
(d) to activate the Screen Saver select not configured or enabled.
Note: Not configured is the default setting.It is now the eyes of the Local Group Policy Editor:
-
I have Windows Server 2003 is installed on a virtual machine in VMware Workstation 8. I need it to learn and practice the use of the Active Directory. I've also set up 3 Windows XP workstations connect to it, which means that they can communicate with Server 2003. What is lacking is the Internet connection on all of them. When I run ping 8.8.8.8 in one of these virtual machines, I get, 'Destination host unreachable.'
I'm not sure, what if the problem comes from the settings in Windows or the settings of the virtual machine.
Can someone help me?
Thank you, guys. I was finally able to put in place. It was quite an ordeal to deal with IP addresses and virtual networks. Here's how I did (in the screenshots) in case someone else needs it.
(I also confess that it is perhaps one of the ways to implement. Maybe there is an easier way to do it with DHCP...)
1. in your computer where is installed VMware Workstation 8 begin the "Virtual Network Editor." It is located in the folder of installation of VMware Workstation. And implement the network following (VMnet2 in my case):
2 then in VMware Workstation itself in the virtual machine when Windows Server 2003 is installed set up two network as connections:
This one is for external access to the Internet:
And this one for intranet communications AD:
3. then in the machine virtual de Windows Server 2003 set up what follows for two network adapters:
For Internet access:
Then, you need allow this connection to share:
And then for the ad access to workstations (ensure that the static IP address is in the range specified in the virtual network over VMnet2 network editor). I've also set up DNS to 127.0.0.1 because I installed on this Windows 2003 DNS server:
4. from the Windows 2003 VM try ping 8.8.8.8. It should work now.
5. go to each workstation, in my case, Windows XP, each in its own virtual machine and set up the network in the VMware Workstation as follows:
6. then in the virtual machine, configure the network connection for Windows XP workstation. Don't forget to assign a new static IP address for each workstation, which not coinside with IP of the domain (this IP address must come from the range specified in the virtual network over VMnet2 network editor):
7. try first ping the domain, in my case ping 192.168.237.128. And then Internet, ping 8.8.8.8. The two should work!
Continue with steps [5-7].
-
I installed a software in the OS (redhat 5.0) invited to vmware, it must communicate with the device via RS232 or USB
but not to communicate.
Vmware tools is installed.
I try to change the attribute of vmware, add the com port and USB, but still, it does not take effect
What is the RS232 or USB available on the operating system called?
How to activate RS232 and USB?
USB and series are not available in a prompt. There are IP network series and usb IP devices that can be used.
-
How to activate the filtering and sorting in a dynamic array
Hello everyone,
I'm going crazy with this problem, hope that someone could help me! I have a dynamic array based on a view that changes its application programmatically. For its dynamic nature, I did in my mainPageDef no reference to the attributes of the table:
<>executables
< variableIterator id = "variables" / >
< iterator lie = "DLOV_1" RangeSize = "25".
DataControl = "DLOV_AppModuleDataControl" id = "DLOV_1Iterator".
R = "always" Sortable = "true" / >
< / executables >
< links >
< Tree IterBinding = "DLOV_1Iterator" id = "DLOV_1" >
< nodeDefinition Name = "DLOV_10" >
< / nodeDefinition >
< / tree >
< / links >
Jspx page I have:
< af:table value = "#{bindings." DLOV_1.collectionModel}.
var = "row".
lines = ' #{bindings. " DLOV_1.rangeSize}.
emptyText = "#{bindings." DLOV_1.viewable? "{'No data to display.': 'Access Denied.'}".
fetchSize = "#{bindings." DLOV_1.rangeSize}.
rowBandingInterval = '0 '.
filterVisible = "true" varStatus = "vs."
selectedRowKeys = ' #{bindings. " DLOV_1.collectionModel.selectedRow}.
selectionListener = "#{bindings." DLOV_1.collectionModel.makeCurrent}.
rowSelection = "single" id = "t1" >
< af:forEach elements = "#{bindings." DLOV_1Iterator.attributeDefs}.
var = 'def' >
< af:column headerText = "#{def.name} '"
sortable = "true" id = "c1".
filterable = 'true '.
filterFeatures = "caseInsensitive" >
< af:outputText value = "#{row [def.name]}" "
ID = "ot1" / >
< / af:column >
< / af:forEach >
< / af:table >
which works really well with the code of my bean (the one who changes the query and execute it):
If (am.findViewObject ("DLOV_1")! = null) {}
am.findViewObject("DLOV_1").remove ();
System.out.println ("off");
}
ViewObjectImpl dLovView = (ViewObjectImpl) am.createViewObjectFromQueryStmt ("DLOV_1", (String) qryTxt.getValue ());
dLovView.executeQuery ();
AdfFacesContext.getCurrentInstance () .addPartialTarget (lovTable);
Now the problem is I can't get the functionality of filtering and sorting of column. How can I achieve that? I noticed that you define the defName in the nodeDefinition to provide a 'model', but I can't do that because my table does not have a fixed structure.
Is there a solution?
Thanks in advance!You can pass me the sample, will take a look - use the same mail id that you will find my profile
-
How to activate the background and black edges
Adobe Camer Raw - I'm turning the page to black background. I got the edges on the right and to the left of the image to black, but I can't find a way to get the rest of the black page, more precisely the area where the histogram and sliders resides.
Camera Raw has no preferences of color like that. The bottom of the page is what it is.
-
Satellite L300D - 13 H - how to activate the FN works on Windows 7?
Hi all
because of company problems, I had to install Windows 7 64 bit on a Satellite L300D - 13 H machine.
Everything is going well except for one thing: how to enable FN keys for the variation of the LCD screen or turn down the volume? I don't know of any piece of software for that.Thanks for any idea!
See you soon
MarcHi Marc,
It seems that you didn't use the forum search before creating a new thread. I m right? ;)
Otherwise you would find similar threads on this issue and you can also search other models of laptops, it s always the same.Then use the forum search and check this thread:
http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=50600&TSTART=0If you have any other questions, please let us know! :)
-
How to activate the handwriting recognition in Windows Vista SP2
Recently, I bought a Wacom Bamboo tablet, model CTL-460. The Tablet works in Adobe Illustrator, Corel Painter Essentials 4, it even works in Windows to scroll, double-click, etc.. The only thing I can't get to work is the handwriting recognition. I thought it may have been my version of Office, so I've recently upgraded to Office 2010 beta, but under ink tools, the only thing it allows me to use is 'Selection of objects.
I tried to change my keyboard in 'Regional and Language Options' under the keyboard 'Other', which includes "Writing Pad", "Write Anywhere" and "Drawing block", but it does not work. I try to click on 'Properties' for the three listed but I get the message error "(empty) property setting is unavailable. I also tried the Windows key + H, but it did not work. I tried all the properties of Tablet I could but nothing worked.
My computer is an IBM - Lenovo T61 Thinkpad of 2007 with a processor Intel Core 2 Duo T7100 @ 1.8 GHZ. I've recently upgraded to SP1 and SP2 to later that day here. I have installed the driver for the tablet before I upgraded to SP1, but updated the driver after the installation of SP2.
Any information on this problem would be greatly appreciated. Thank you.
Hi His_Dudliness,
Please see the article below for further troubleshooting:
I hope this helps!
Debra
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think
Maybe you are looking for
-
Hi all! Need help! x 451 and 551 x are a connection WiFi and LAN Need to connect to the network 192.168.60.0 255.255.255.0 and the PC printing Port of #Ethernet have IP 192.168.60.1 255.255.255.0 Need to connect to the WiFi 192.168.61.0 255.255.255.0
-
I get the message "Excutable for FreeCell game has stopped working." "A problem caused blocking the program works correctly. Windows will close the program and notify you if a solution is not available"(no notification received) regarding performance
-
Problem Manager of horizontal scrolling for OS 6.0 and more?
Hi all. I have a problem with the Manager of Horizontal scrolling. Every thing worked for OS 5.0 and below, the question arises for OS 6.0 and more. For example, check the following: I have 2 HFM added to the optimization of resources. HFM1 - contain
-
Try to install the update for win 7 error code windows service install could not be accessed
I can't indtall a program Try to install the update for win 7 error code windows service install could not be accessed. Insatller Windows is not installed correctly.
-
Restore 3 rd-party apps blackBerry smartphones?
Is there a way to restore all my applications 3rd - party after an upgrade of the OS or restore? I backed up and restored everything to implement, but only restored apps are ones that come with the basic settings BlackBerry. I hesitate to make an a