How to add a symbol at the beginning of a project?

Similar Questions

• How to add a space between the currency symbol and price?

  Hello

  Can you please guide me how to add a space between the currency symbol and price?

  Support told me this question in the forums because it is done with JavaScript and it is not covered in the official documentation.

  Any who have done this? I would like to turn 20 at 13.20 RON RON13 or 32, 90 to 32,90 USD.

  Thank you!

  Hello.

  I test and it works.

  If any who need it, this is how I did it.

  I changed the models of Modules-> page layouts of the shop online-> overall layout.

  I added at the end of the HTML code, the code following JS:

  The result can be seen here: http://magazindepiese.worldsecuresystems.com/accesorii/chimice?Page=1&Items=12

  Instead of PRICE: RON22, 62, now it's READY: 22,62 RON that is correct for the Romania.

  Thank you Mario!

• How to extend video back from the beginning

  My video editor tells me that I need to have 2 seconds early and end 2 seconds do not talk and repeat basically the first or the last displayed image.  I have currently only about 1/2 a second so I need extend backward and before 2 seconds.

  It seems that I can simply grasp the handle at the end of the video to extend forward, but I can't figure out how to extend it back from the beginning. When I take the handle, I can ' drag it to the left.

  In addition, my video is essentially a timeline I have razor cut into about 10 modules.  each module is marked with markers on the timeline.  What is the best way to add the padding forward and the end of each module?  I started lasooing and by dragging the last video, move the marker, then second lasso at the last, move, etc.  Is their an easier way to do this?

  Thank you

  I think the answer to your prayers is insert the Segment to hold image command. First assign a keyboard shortcut to the command. The extent of the workflow, I'm only being familiar with the feature, but I think it goes something like this.

  1. Open the sequence
  2. Move the playback cursor at the beginning
  3. Insert the wedge Segment of image
  4. Move the playhead to the end
  5. Insert the wedge Segment of image
  6. Close ff. A, open B next, repeat 2 to 6...

• I use the full version of DASYLab 8.0, how to add PID module in the design of the façade (window layout)? while I can vary the p, i, d values in the window layout

  I use the full version of DASYLab 8.0, how to add PID module in the design of the façade (window layout)? while I can vary the p, i, d values in the window layout

  To do that you will need to change the varibles PID values and then use the sliders to add numbers to a latch for variables that point.

  This is how I think it works in Version 8.

  In all cases, you should move on to 12 more stable summer.

  In addition, unless that is a very slow process, I generally do not like closed loop PID with DASYLab due to the fact that computers is not reliable with timing.

• How to add more application under the new tab shortcuts when we right click on the desktop.

  How to add more application under the new tab shortcuts when we right click on the desktop.

  Hello

  I suggest you to post your questions in the forums 'Development of the User Interface for Windows Desktop' for better assistance.

  Here is the link: http://social.msdn.microsoft.com/Forums/en-US/windowsuidevelopment/threads

• How to add a shortcut in the taskbar next to the Start Menu?

  I would like to know how to add a shortcut in the taskbar next to the Start Menu (a place with a small shortcut icon).

  Does anyone have any suggestions?
  Thanks in advance for your suggestions

  Hello

  Have a look here: http://www.sevenforums.com/tutorials/397-taskbar-pin-unpin-program.html

  When you scroll down on this page, you will find a lot more "pin to taskbar" - tutorials.

  Take a look at this little program free of practical assistance, too: http://winaero.com/comment.php?comment.news.108 of the taskbar Pinner

  I hope this helps.

• How to add multiple lines when the button is clicked

  How to add multiple lines when the click on button now is just add a row .plz give me idea how... waiting for answer

  / public final class screen extends MyScreen
  {
  /**
  * Creates a new object of MyScreen
  */
  ObjectChoiceField obj1 obj2, obj3, obj4.
  Table of String() = {'101 ', ' 102'};
  String of shadow [] = {"Shade1", "Shade2"};
  Rolls of string [] = {'101 ', ' 102'};
  String cutting [] = {"100-150", "150-200"};
  Chain of selectedindex1, selectedindex2, selectedindex3, selectedindex4;
  LabelField lbl1 lbl2, lbl3, lbl4;
      
  GFM LinedGridFieldManager;
  HFM HorizontalFieldManager, hfm1, hfm2 hfm3;
  VerticalFieldManager vfmMain;
      
  public MyScreen()
  {
      
  Set the displayed title of the screen
  hfm1 = new HorizontalFieldManager (HorizontalFieldManager.NO_VERTICAL_SCROLL |) HorizontalFieldManager.NO_VERTICAL_SCROLLBAR);
  hfm2 = new HorizontalFieldManager (HorizontalFieldManager.NO_VERTICAL_SCROLL |) HorizontalFieldManager.NO_VERTICAL_SCROLLBAR);
  hfm3 = new HorizontalFieldManager (HorizontalFieldManager.NO_VERTICAL_SCROLL |) HorizontalFieldManager.NO_VERTICAL_SCROLLBAR);
  HFM = new HorizontalFieldManager (HorizontalFieldManager.FIELD_RIGHT);
  vfmMain = new VerticalFieldManager (Manager.NO_VERTICAL_SCROLL |) Manager.NO_HORIZONTAL_SCROLLBAR);
          
  obj1 = new ObjectChoiceField ("", graph, 0, FIELD_LEFT);
  obj2 = new ObjectChoiceField ("", blind, 0, FIELD_LEFT);
  Obj3 = new ObjectChoiceField ("", rolls, 0, FIELD_LEFT);
  Obj4 = new ObjectChoiceField ("", cuts, 0, FIELD_LEFT);
          
  LBL1 = new LabelField("");
  LBL2 = new LabelField("");
  lbl3 = new LabelField("");
  lbl4 = new LabelField("");
          
  ButtonField btnAdd = new ButtonField ("ADD", FIELD_RIGHT);
          
  GFM = new LinedGridFieldManager (4, LinedGridFieldManager.VERTICAL_SCROLL);
          
  hfm1.setMargin (20, 0, 10, 0);
  hfm1. Add (new LabelField ("Chart"));
  hfm1. Add (obj1);
  hfm1. Add (new LabelField ("Shade"));
  hfm1. Add (obj2);
          
  hfm2. Add (new LabelField ("Rolls"));
  hfm2. Add (Obj3);
  hfm2. Add (new LabelField ("Cuts"));
  hfm2. Add (Obj4);
  HFM. Add (btnAdd);
          
  GFM. Add (new LabelField ("Chart"));
  GFM. Add (new LabelField ("Shade"));
  GFM. Add (new LabelField ("Rolls"));
  GFM. Add (new LabelField ("Cuts"));
          
  vfmMain.add (hfm1);
  vfmMain.add (hfm2);
  vfmMain.add (hfm3);
  vfmMain.add (hfm);
  vfmMain.add (new SeparatorField());
  vfmMain.add (gfm);
  Add (vfmMain);
          
  btnAdd.setChangeListener (new FieldChangeListener()
  {
  ' Public Sub fieldChanged (field field, int context) {}
  TODO self-generating method stub
  selectedindex1 = chart [obj1.getSelectedIndex ()];
  selectedindex2 = shade [obj2.getSelectedIndex ()];
  selectedindex3 = rolls [obj3.getSelectedIndex ()];
  selectedindex4 = cuts [obj4.getSelectedIndex ()];
                  
  While (LBL1. GetText(). Equals("") | LBL2. GetText(). Equals("") | lbl3. GetText(). Equals("") | lbl4. GetText(). Equals(""))
  {
  LBL1. SetText (selectedindex1);
  LBL2. SetText (selectedindex2);
  lbl3. SetText (selectedindex3);
  lbl4. SetText (selectedindex4);
                  
  GFM. Add (LBL1);
  GFM. Add (LBL2);
  GFM. Add (lbl3);
  GFM. Add (lbl4);
                  
  }
  }
  });
  }
  }

  Hi Piya,

  I run your code, and according to your logic that it works correctly.

  It's adding that line only once because according to your logic that one line can be added to MDT, if you do not want to add line on each click on the button, follow these steps:

  selectedindex1 = chart [obj1.getSelectedIndex ()];
  selectedindex2 = shade [obj2.getSelectedIndex ()];
  selectedindex3 = rolls [obj3.getSelectedIndex ()];
  selectedindex4 = cuts [obj4.getSelectedIndex ()];

  Lbl1 LabelField = new LabelField("");
  Lbl2 LabelField = new LabelField("");
  LabelField lbl3 = new LabelField("");
  LabelField lbl4 = new LabelField("");
  If (LBL1. GetText(). Equals("") | LBL2. GetText(). Equals("") | lbl3. GetText(). Equals("") | lbl4. GetText(). Equals(""))
  {
  LBL1. SetText (selectedindex1);
  LBL2. SetText (selectedindex2);
  lbl3. SetText (selectedindex3);
  lbl4. SetText (selectedindex4);
                  
  GFM. Add (LBL1);
  GFM. Add (LBL2);
  GFM. Add (lbl3);
  GFM. Add (lbl4);
                  
  }

• How to add 2 points on the Noel e? I don't have a 2nd series of digits to the right of the keyboard.

  How to add 2 points on the letter e in the Noel case?  I don't have the 2nd series of digits to the right of the keyboard. Windows 8

  Wednesday, April 23, 2014 23:25:53 + 0000, RobertNortonWZ wrote:

  How to add 2 points on the letter e in the Noel case?  I don't have the 2nd series of digits to the right of the keyboard. Windows 8

  You mean you want the e character? These two points are called a
  umlaut. You do not add points; the e with points is another
  a simple e character. There are several ways to get this
  character, but a simple is to hold the ALT key and type 137.

  As a point of information if you are interested, the subject of a
  umlaut is to indicate that the second of the two successive vowels is
  pronounced separately. So the word 'book' is pronounced buk, but the
  Book name is pronounced BO - ock.

• How to add two lines when the second row is not visible, but also gets the first data line too?

  Mr President

  Jdev worm is 12.2.1

  How to add two lines when the second row is not visible, but also gets the first data line too?

  I want to add two lines like below picture, but want the second to remain invisible.

  

  I asked this question but my way of asking was wrong, that's why for me once again.

  Concerning

  Try to follow these steps:

  1. in the database table to add the new column "JOIN_COLUMN" and add the new sequence "JOIN_SEQ".

  2. Add this new column in the entity object. (You can add this in entity object by right clicking on the entity object and then select "Synchronize with database" then the new column and press on sync)

  3. in your bookmark create button to create only one line NOT 2 rows.

  4 - Open the object entity--> java--> java class--> on the entity object class generate and Tick tick on the accessors and methods of data manipulation

  5 - Open the generated class to EntityImpl and go to the doDML method and write this code

    protected void doDML(int operation, TransactionEvent e)
    {
      if(operation == DML_INSERT)
      {
        SequenceImpl seq = new SequenceImpl("JOIN_SEQ", getDBTransaction());
        oracle.jbo.domain.Number seqValue = seq.getSequenceNumber();
        setJoinColumn(seqValue);
        insertSecondRowInDatabase(getAttribute1(), getAttribute2(), getAttribute3(), getJoinColumn());
      }
  
      if(operation == DML_UPDATE)
      {
        updateSecondRowInDatabase(getAttribute1(), getAttribute2(), getAttribute3(), getJoinColumn());
      }
  
      super.doDML(operation, e);
    }
  

    private void insertSecondRowInDatabase(Object value1, Object value2, Object value3, Object joinColumn)
    {
      PreparedStatement stat = null;
      try
      {
        String sql = "Insert into table_name (COLUMN_1,COLUMN_2,COLUMN_3,JOIN_COLUMN, HIDDEN_COLUMN) values ('" + value1 + "','" + value2 + "','" + value3 + "','" + joinColumn + "', 1)";
        stat = getDBTransaction().createPreparedStatement(sql, 1);
        stat.executeUpdate();
      }
      catch (Exception e)
      {
        e.printStackTrace();
      }
      finally
      {
        try
        {
          stat.close();
        }
        catch (Exception e)
        {
          e.printStackTrace();
        }
      }
    }
  
    private void updateSecondRowInDatabase(Object value1, Object value2, Object value3, Object joinColumn)
    {
      PreparedStatement stat = null;
      try
      {
        String sql = "update table_name set column_1='" + value1 + "', column_2='" + value2 + "', column_3='" + value3 + "' where JOIN_COLUMN='" + joinColumn + "'";
        stat = getDBTransaction().createPreparedStatement(sql, 1);
        stat.executeUpdate();
      }
      catch (Exception e)
      {
        e.printStackTrace();
      }
      finally
      {
        try
        {
          stat.close();
        }
        catch (Exception e)
        {
          e.printStackTrace();
        }
      }
    }
  

• How to add a tail to the end of a text in photoshop?

  How to add a tail to the end of a text in photoshop?

  I tested the police (from dafont.com) in the real Photoshop on a Windows 7/32 bit computer.

  It is all ok.

  Fenja

  

• How to add an outline to the text?

  How to add an outline to the text?

  Add a line in the character of the text layer settings.

• I should add an arrow at the beginning of paragraphs, where is this feature?

  I should add an arrow at the beginning of paragraphs, where is this feature?

  Comment tool > drawing tools > arrow tool

  Be well...

• How can I get rid of this thing of tv with the symbol of the camera in my project window, it's too much space. Thank you

  How can I get rid of the TV with the symbol of the camera in my project window, it's too much space.

  This is the preview window.

  In your support, it is show a folder but if it's a media clip... It is playable (Source Bin overview of monitoring).

  Disable it in the drop-down Menu (three bars horizontal bit)

• How to add an image of the poster/splash for Captivate 6

  Hello

  I would like to add a poster/splash picture to my captivate movie.

  My output is HTML 5. I would like to connect the video in Robohelp and video open in a web browser.

  Before the movie starts the video image is white with a "play" button. Can I add an image?

  Thanks in advance for your help.

  Hi mvk66,

  Thanks for the post.

  Captivate 6, have an option to add an image at the beginning of the film.

  Please follow the steps below:

  1 Goto the Edit--> preferences.

  2. Select the project category--> start and end

  3 uncheck AutoPlay (if enabled)

  4 search for the image.

  5. After you have successfully added to the image, close the Preferences dialog box and publish them on HTML5.

  Hope it helps.

  Thank you

  Mini,

• How to add Russian keyboard to the phone of flame with the construction of the aurora

  I have Mozilla flame phone.
  I change the stock software for:
  Boot2Gecko 2.1.0.0 - prerelease.
  Version of the platform: 34.0.
  Channel: aurora.

  But has no Russian keyboard. How to add the Russian keyboard on track.
  Thank you!

  p.s. I have tha same problem with 2.0. I build keyboard gaia repo git with included Russian keyboard app and install it. Maybe there is another way?

  The Russian keyboard should be available in these versions, if they are not, please also create a report bug with accurate information, equip and peripheral on the device. The component would be Gaia::System:Window

  In the meantime, here are the instructions on how to build with several locale if the local Russian keyboard is not available:
  https://developer.Mozilla.org/en-us/F.../building#Building_multilocale

  If you need help with this, we are happy to help you.