How to adjust the GUI on different screen resolution?

Similar Questions

• Portege R700 - cannot adjust the 1366 X 768 screen resolution

  My screen does not have the entire screen - he ends up on about 2cm on the right side.

  The problem is that I can't adjust the 1366 X 768 screen resolution. Highest on the list of options is 1200 X 800. I downloaded the current driver - but it does not help. I used system restore a few times and it is sometimes useful, but not always - IE, it defines the resolution of 1366 X 768, and all goes well.

  It makes me crazy!
  It's a R700, windows 7, 64 bit.

  Are you using the original Toshiba recovery image? I mean the original pre-installed OS that you got with your laptop?

  I mean the original image is designed for certain model of laptop, so I can't imagine that this problem occurs with the Toshiba drivers.

• Re: How to change the Satellite L650-108 screen resolution greater than 1024 x 768

  You just bought a new 108 L650, but I cannot fix the upper to 1024 x 768 screen resolution.
  It should be 1366 x 768.

  Right-click on the desktop and choosing the resolution of the screen only gives you the opportunity to 800 x 600 or 1024 x 768. I can't find anyway to get it to the correct resolution.

  Help would be most appreciated.

  See you soon,.

  Tillman

  Hello

  Have you installed a graphics card driver?
  Please go to page European driver Toshiba and download and reinstall the graphics driver.

  Good luck

• Different screen resolutions - what is the best method?

  Hello

  I know that this question was asked a thousand times before, but what is the best way and the most reliable to deal with different screen resolutions?

  I read a lot of posts about it and tested on everything: unique, methods, combinations, let labview scale my objects, their scale by myself, etc. Another alternative that I found was to design the front panel to the lower screen resolution, let labview scale objects (graphics, controls tab and decorations) as window increases or decreases and lock "groups of indicators, controls and text" to prevent them from scaling and overlap. However, if I lock these "groups" that they don't move in the right place in the resizing of the window. Then, I put these 'groups' within groups and tried to compensate for the position via the property node, but it was not possible because the 'groups' within the cluster have been locked!

  After all these tests, I realized that the best way to manage different screen resolutions must have a main VI that detects the current screen resolution and load the good VI for this resolution. The problem is that I have a VI for each screen resolution (created one by one) and if I want to move the code I have to do the same task for all the screws

  Since I already have all the screws (for different screen resolutions), I could get the sizes and positions of all the objects through property nodes and create a kind of 'cluster' which, after the detection of the current screen resolution, would be to adjust all the objects. But I have several decorations in the front panel and I can not get information via the node property of them.

  THW way you can prevent the control to move when you're scaling, is to group the controls with 'something' which is placed outside the façade. In the example I give you now, you can see that I have grouped the stop button and the 'red faces' with a 'point' on the left side of the front panel.

• How to adjust the brightness of the screen

  original title: brihtness XP

  How to adjust the brighteness on my monitor of the monitior does not work, I tried display, setting there is nothing to Brightness.Thanks

  Daisy

  Wednesday, May 23, 2012 11:40:30 + 0000, daisy.s wrote:

  How to adjust the brighteness on my monitor of the monitior does not work, I tried display, setting there is nothing to Brightness.Thanks

  The brightness of the screen is normally something on your
  Monitor itself, not Windows. See the documentation of your
  instructor about how to proceed.

  Ken Blake, Microsoft MVP

• I work on a laptop running XP and I can't find how to adjust the brightness of the screen

  original title: screen brightness
  I work on a laptop running XP and I can't find how to adjust the brightness of the screen. He is not bright enough for the environment, in that I am currently working.
  Any help?

  Look in the BIOS (nothing to do with the operating system) and change first there - so it's also brilliant to (on battery vs. connected to power - these settings, you determine thus.)

  In Windows - you should be able to control the brightness * if * you have everything installed the appropriate drivers for your laptop * and * they chose to give you these controls (the true drivers/software from the video card manufacturer is usually done).

  Also - if the brightness is not sufficient because of the light of the Sun - then by adjusting it can't helped.  Not many mobile consumers have a screen that can be read in the light of the Sun.  There are laptops with special screens for this type of environment.  Crank your brightness might help - but if you do not have an anti-glare screen, etc...

• My screen is very bright. I need more contrast. How to adjust the brightness contrast restoration d. help, please.

  My screen is very bright. I need more contrast. How to adjust the brightness contrast restoration d. help, please.

  http://Windows.Microsoft.com/en-AU/Windows-Vista/adjust-your-monitors-brightness-and-contrast

  Adjust the brightness and contrast of your monitor

  You can adjust the brightness and contrast of your monitor to improve the readability of the text and making digital pictures appear more like they look when they are printed.

  See you soon.

  Mick Murphy - Microsoft partner

• How to adjust the brightness of the screen of a laptop computer from HP (HP 6730 s)?

  Original title - Windows 8

  My daughter recently bought a new laptop (HP 6730 s) and bought and has Windows 8 installed on it.  She doesn't know how to adjust the brightness of the screen.

  That's what she said "how to adjust the brightness of the screen on a laptop HP 6730 s running Windows 8? The internet is not give me answers. There is no "graphics properties" option when I click right on the desktop, nor is it a brightness slider when I go into the truly enigmatic Control Panel. ".
  I tried searching via the Microsoft website for an answer.  The only answer is for Windows 8.1 - she tried the steps to adjust brightness as given for Windows 8.1 However, it does not work for Windows 8.
  Could you please help and let me know how to get to the setting of the brightness, on his laptop screen, for Windows 8.
  Thank you in advance.
  J Smith (South Africa)

  Monday, January 27, 2014 19:38:55 + 0000, J Smith_sa wrote:

  My daughter recently bought a new laptop (HP 6730 s)
  and bought and has Windows 8 installed on it.  She doesn't know how to adjust the brightness of the screen.

  That's what she said "how to adjust the brightness of the screen on a laptop HP 6730 s running Windows 8? The internet is not give me answers. There is no "graphics properties" option when I click right on the desktop, nor is it a brightness slider when I go into the truly enigmatic Control Panel. ".

  I tried searching via the Microsoft website for an answer.  The only answer is for Windows 8.1 - she tried the steps to adjust brightness as given for Windows 8.1 However, it does not work for Windows 8.

  Could you please help and let me know how to get to the setting of the brightness, on his laptop screen, for Windows 8.

  If it is possible to do, it's a feature of his laptop, not of
  Windows. She should contact HP or look on their website.

• How to adjust the website to work with several screen resolutions?

  http://www.allenkey.com.au/

  Hello, I recently designed this Web site and the formatting isn't correct when read with different screen resolutions

  Help please sélectionner!

  Hello, I recently designed this Web site and the formatting isn't correct when read with different screen resolutions

  Just so you know, and to keep clear wire, the resolution got nothing to do with the result by your page or is formatted.  A given page appear exactly the same on any screen resolution requirement to retain the same value in pixels the width of the browser.  This is the variation of the width of a screen to another resolution which causes the difference.  And Yes, it's the fact that you used absolute positioning as a method of main layout that is the problem for the reason that JTANNA has already been mentioned.

  Now - how do you want your page to behave?  Do you want to be centered and fixed width (that would be the easiest).  In this case, change this.

  on this subject.

  and this-

  on this subject.

  Now, all your containers AP reposition so that the page is again aligned the way you want, and you're done.

• I have windows 8 laptop model is sony sve123cnw, but now I have install windows7 ultimate how I adjust the brightness of the lcd screen

  How to adjust the brightness of the lcd for sony vaio laptop

  How to adjust the brightness of the lcd for sony vaio laptop

  

• How to solve this error "the game met a fatal DirectX issue while trying to start. Try a different screen resolution or bit depth. If this does not work, try new video drivers. »

  Hi all

  I get the following error every time I try and start Asherons call on a new Dell Latitude E5510 laptop.

  The game has encountered a fatal DirectX problem trying to start.
  Try a different screen resolution or bit depth. If this does not work, try new video drivers.

  This error occurs just after clicking the world to enter.

  • I have a fresh install of Win7 64 bit (entirely the window update)
  • The latest Intel HD - v8.15.10.2622 01/10/2012 graphic card driver.
  • A sweet DX 9 and DXDiag and 11 installation reports no errors.

  I lowered res video and depth of color, but without result.

  Digitized internet and found others with the issue but no resolution, I could see.

  Anyone have any ideas/suggestions?

  I love a solution restored for the following driver and the problem resolved.

  V8.15.10.2599 21/10/2011

• How to adjust the brightness/contrast on touchsmart 600-1370?

  The 600-1370 monitor is too bright for my eyes and I used the wireless keyboard

  with fn/f10 to reduce the brightness to zero and the display backlight

  It's still too, I find no OSD on this lcd monitor more adjust brightness/contrast/color

  can anyone help? really appreciate it

  wang66 wrote:

  Someone knows how to do this? I'm puzzled why the 600-1370 does not have on-screen

  to let the user easily adjust the contrast/brightness/color screen, thanks in advance

  I don't know why you are puzzled, it of an all in one, just like a laptop and works just like a laptop in terms of these functions. It is NOT a monitor with the possibility to be connected to a variety of different sources.

  If it is not common, if you went the advanced settings for the display, you will also gain adjustments more and you can really bumble in there if you try.

  I never ran a House for a fixed computer or laptop whatever LCD 100% during the day and with the cursor of the power management

• Is it possible to adjust the brightness of my screen?

  Is it possible to adjust the brightness of my screen?  If so, how?

  If it's a desktop monitor, there should be buttons on the monitor to do this. I found this a useful tool, you can set a different brightness for the display of day and night. However, you can also just use it to quickly adjust the brightness at any time.
   
  f.Lux
  http://Stereopsis.com/flux/

• Satellite 1900-101 - How to adjust the display?

  I have a type of laptop Toshiba 1900-101 and have been very satisfied since I bought it 3 years ago.
  One thing I fear is, that I could 'break' the socket plastic of the screen, since I have to use force to open / close.

  Could someone tell me how to adjust the display in order to move much smoother, which screws I need to loosen, whatever...

  Thanks for your help

  Jens

  Hello Jens

  Unfortunately, there is nothing to see. The construction of screen carrier doesn't leave something like that. As far as I know the carrier is molded plastic. I'm sorry.

• I am not able to adjust the brightness of my screen, Lenovo P500

  I just upgraded my system to Windows 8.1. And I stuck with this sun screen. I couldn't change the brightness of the display using the keys. I also tried to adjust the brightness on the control panel power Plan, but nothing works.

  I had the same problem before too, so I used to roll back the driver Intel HD, and the problem used to be solved. But after the upgrade of the system, is there no option for Driver up. So, how can I adjust the brightness of my screen again?

  razendra wrote:

  Uninstalled the driver with delete option, installed the new version!

  Good news, it's screen is bright now!

  Bad news, it's screen is bright now!

  I couldn't adjust the brightness!

  Try to go to bios. Use the function keys to adjust brightness. Can you make the adjustment?