How to adjust the print margins in Firefox on Linux 17?
How can I set print margins in Firefox on Linux 17? There is no margin setings in layout, or in the print dialog box. About: config, there are sets of settings called e.g. printer_Print_to_File.print_margin_top etc., but also the print.printer_Print_to_File.print_margin_top etc, but when I try to set these it seems they zero to 0.5 when I print something, and the print margins are always the same. In previous versions of Firefox, I managed to adjust the margins by typing about: config, but that changed in a recent version.
I can confirm that I have the same problem on Firefox on Linux 17. Except that preferences do /not/ / giving to 0.5.
We could try to isolate the problem. If you have another printer to try, then you can try it and see if the margin settings also get ignored. (It may be just the PDF printer that ignores them).
On the other side, this PDF printer has worked for you before, please file a bug in Firefox. https://developer.Mozilla.org/en/docs/Bug_writing_guidelines
The printer tends to 'rolling' envelopes when printing and put a fold in some ways. Is it possible to adjust the flow to the printer so that it is not offending the envelopes? With self-adhesive envelopes, it works better, but it still changes the fold in the flap.
I want to know if this can be adjusted. Please do not just stick in the boilerplate response.
Hi @JayEll ,
I see you found folds when printing on envelopes. I want to help you solve this problem.
Adjust the print driver for the type of paper for envelope, this should solve this problem.
If the paper is not set correctly, it can cause creases or types of paper not supported also.
You may just be able to set a default to plain paper. If you print from Word, you need to set the default settings through devices and printers in the printer properties.
What type and size and the weight of the envelope are you using?
Try another type of envelope to see if you have the same results.
The printer supports up to 24 lb envelope.
You have this problem with other types of paper?
Have a great day!
My screen is very bright. I need more contrast. How to adjust the brightness contrast restoration d. help, please.
Adjust the brightness and contrast of your monitor
You can adjust the brightness and contrast of your monitor to improve the readability of the text and making digital pictures appear more like they look when they are printed.
See you soon.
Mick Murphy - Microsoft partner
How to adjust the number of rings on iPhone 6s before the beginning of voicemail?
Contact your operator. That is controlled by them. It is not based on the number of rings, it is based on time.
Using the latest iOS on iPhone6s with the latest version of iMovie.
I could not find how to adjust the brightness of a video I import to iMovie, it is quite dark and I want to increase the brightness or exposure.
Thank you for using communities Support from Apple!
I understand that you want to adjust the brightness of a clip in iMovie for iOS. You cannot adjust the brightness directly, but you can add a filter to a clip or project that could potentially illuminate it for you.
Have a great day!
The print spooler is a service that is built into most Windows operating systems. His job is to help control print jobs and interact with the printer. Problems with the print spooler are blocked in the queue of print jobs.
Sometimes the print spooler stops working or was an error to occur. The following video shows how to restart the print spooler service in Windows 8.
For similar problems with printing try printing HP and the Scan doctor. It is a diagnostic utility that can sometimes find and solve printing problems. Find and fix common problems printer using HP Diagnostic tools
I hope this helps someone who has problems with their print spooler or who needs to restart. If someone has a problem to restart the print spooler let me know and include your computer model number and that you use 32-bit or 64-bit of Windows 8.
How to adjust the brightness and contrast for Compaq Presario all-in-One CQ1 - 1007 D desktop PC? THX.
There were buttons No. brightness and contrast on the front of the monitor-no onscreen menu.
On your desktop,.
Right-click to select graphic properties->
in display settings, click Advanced settings
Here you go, you can do almost anything with the brightness
Hope it helps
I've seen various descriptions of how to use the print screen function.
It would be nice to actually tell one that works. None have worked for me.
[Fn] and Prt SCr does not work.
CTRL and Prt SCr does not work.
CTRL, Alt, and Prt SCr does not work.
[Fn], Ctrl and Prt SCr does not work.
If anyone knows the correct method to activate the screen capture function which would be a good thing.
From the looks of things, HP has a big problem with this function.
Here's a microsoft articleon the use of the screenshot function.
This should answer your questions.
Thanks for taking a peek.
I have a type of laptop Toshiba 1900-101 and have been very satisfied since I bought it 3 years ago.
One thing I fear is, that I could 'break' the socket plastic of the screen, since I have to use force to open / close.
Could someone tell me how to adjust the display in order to move much smoother, which screws I need to loosen, whatever...
Thanks for your help
Unfortunately, there is nothing to see. The construction of screen carrier doesn't leave something like that. As far as I know the carrier is molded plastic. I'm sorry.
I bought a C5150 which had been used as a screen. I'm unable to access the built-in web server network setting. Reset the printer to the factory setting, of the façade has no effect. There are no instructions to all documentation on how to reset the printer. Help!
I guess that you did not read my * last * post here, which has been designed for you. in any case...
-Press and hold the "Setup" & "left arrow" keys Release the two buttons. Display should say "enter special key Combo".
Display should say "Support" and display the FW XXXXX rev (you are now on the Help menu)
TO MAKE RESET "Half full" in the HELP MENU:
-Use the > to scroll to 'Resets the Menu' and press 'OK '.
-Put "Full Semi" highlight Reset and press 'OK '.
-Unit will shut off by itself in 3-5 seconds
-Power and then turn it back on by button / stop
-Leave the print alignment page - do NOT cancel
-Allow to go through maintenance and Photosmart screen (normal)
There, an agency know how to adjust the memory of the video card in the laptop Toshiba Satellite A100-811?
The physical memory of my laptop is 512 MB, I want to share my 128 MB videocard, nomatter if 384 will remain in my physical memory.
Your immediate response is much appreciated.
Thanks in advance
the Satellite A100 supports an Intel 945GM processor 8MB - 128 MB of graphics memory shared memory, it's true. But
as far as I know it of not possible to allocate this memory shared manually, it happens automatically.
If the application running more graphic must map memory then the OS will be automatically increases this value.
It seems that this laptop came with 512 MB of memory. In my opinion you must upgrade the memory of 1024MB if you want to use the full 128 MB shared memory.
Difficulty controlling the queue with your new Windows 8? Here's a great video on how to do it:
Hope this helps to understand how to check the print queue in Windows 8. If you have problems, let me know, I'll see what I can do to help.
How to set the printer wireless ad Hoc mode to CP1025nw with automatic stop is off? IE never automatic.
Thank you very much for your help, if necessary.
Quite a few questions, send, but I will do what I can to answer them.
I recommend first to buy a router, even if it's one you won't connect to internet and it network with others your PC and printer. This will give you the best features and the results of what you're trying to do.
In addition, the automatic stop of the printer function can be disabled and is not affected by the type of connection. Usually, you can go through the configuration Menu and select tools to change the options there on the energy saving features.
Finally, the auto off function on your computer is a Windows question, but one easy answer. If you're on a laptop, you can right click on the battery in the tray (lower right corner) and change the settings for energy conservation.
You might be better off installing the printer via the USB cord and alternately inspiring when you use it, but which is not optimal if you are printing only a few documents on an irregular basis. A network connection is the easiest to manage across multiple computers, honesty, but you have certain requirements for this connection and limits as well.
I hope this information is useful!
How to clear the print queue on printer HP 4620?
From the desktop, hold down the Windows key and press R. In the run window, type services.msc and press to enter. Scroll down to the print spooler service, right click and select Properties, then click the Stop button. Now search for C:\Windows\System32\Spool\PRINTERS, then delete the work inside this folder - you may need to click a command prompt to get the authority to open the PRINTERS folder.
Restart the computer and you should find that the documents have been deleted.
DP - K
I followed the instructions how to uninstall the printer, but how do I reinstall it please help me. I have the original disc supplied with the printer, but it does not start in the disk drive.
You can check the links to see how to install a printer.
Maybe you are looking for
There are three computers in the opffice, 2 have windows 7 and the other is XP. Both with windows 7 suddenly will not send emails on windows live mail. all three are on the same network. I contacted Norton to see if that was the problem and they came
My computer freezes sometimes and it is not as fast as it once was.
I replaced the hard drive and after replacing however, I started getting a message from Windows saying that my version is not authentic. Please notify. Diagnostic report (1.9.0027.0):-----------------------------------------Validation of Windows data
Hi Experts,Nicely, I would subtract two type of time_clock that varcahr2 to the database and get the minutes of the result.Data:Select ' 08:00 ' as start_time_clock, 15:00 ' as the double end_time_clockUnion of all theSelect ' 09:00 ', 16:30 ' of the
I'm mostly new to first and just start to try and ramp upward on the simpler editing and export process. I'm trying to make a GoPro video, 1080 p @ 60 fps. I started yesterday evening, turned up at 05:00 to see it is 54% of the second pass - had to s